Dialer not connecting to campaign manager

Hello,
I have the dialer not connecting to campaign manager and showing the following:
10:00:50 Trace: Attempting EMT connection to computer [172.16.200.82/172.16.200.82], port [40032]
10:00:51 Trace: Unable to establish an EMT connection:
10:00:51 Trace: error value [10060], text: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because con
nected host has failed to respond.
Also the dialer PIM is showing the following:
10:01:37 Trace: Transport: appServerHostName1 = 172.16.200.83
10:01:37 Trace: Transport: appTcpServiceName1 = 38001
10:01:37 Trace: Transport: appServerHostName2 = 172.16.200.83
10:01:37 Trace: Transport: appTcpServiceName2 = 38001
10:01:37 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
10:01:37 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:01:38 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:01:49 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:01:50 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:02:02 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:02:03 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:02:08 ProcessPIMSetIdleReq: Peripheral 5004 going idle.
10:02:14 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=-1).
I have checked network connectivity, ping by IP address, ping by hostname, dialer config pointing to address of LoggerA.
What should I check next?
Note that I have outbound dialer working fine on ProggerA and I am currently duplexing PG and pim process on ProggerB. PIM1 is ACTIVE but PIM2 is IDLE (logs above are for PIM2)
Thanks,
Justine.

Hi,
Are you planning to have Duplex dialers ?
(Assuming it is SIP)If that's the case, you may have to look at the Best Practices for SIP dialer in SRND.
"Use a media routing PG with one media routing PIM for duplex SIP Dialers. One SIP Dialer is active while another SIP Dialer is in warm standby mode. One MR PIM is for each SIP Dialer. In a duplex MR PG environment, each PG side has only one PIM that connects to the local dialer when the Dialer becomes active"
Regards,
Senthil

Similar Messages

8900 Not Connecting to Desktop Manager in Boot Camp

Hi all
I have a problem in Boot Camp (XP Pro) on my new MacBook Pro. My 8900 shows up perfectly in device manager and I can also browse the media card. When I run Desktop Manager 4.7, it cannot pick up the BlackBerry and it shows as Disconnected. I have tried re-installing Desktop Manager and even tried the latest unreleased version 5.0. Browsing other forums have suggested I take the battery out for a minute and try again and this didn't work either.
I have tried going back to DM 4.7, re-installed Bootcamp 2.1 drivers and installed VMWare Fusion. Nothing gets it connected, yet every time the 8900 shows up perfectly in Device Manager.
I installed on my partners HP laptop and it connected immediately in DM. I really need this to work on my Mac (boot camp preferably) and i simply cannot understand why its not working.
Please help me! What am I doing wrong? I've been trying for hours and so frustrated!
Thanks in advance...
Rich

Hi all
I have a problem in Boot Camp (XP Pro) on my new MacBook Pro. My 8900 shows up perfectly in device manager and I can also browse the media card. When I run Desktop Manager 4.7, it cannot pick up the BlackBerry and it shows as Disconnected. I have tried re-installing Desktop Manager and even tried the latest unreleased version 5.0. Browsing other forums have suggested I take the battery out for a minute and try again and this didn't work either.
I have tried going back to DM 4.7, re-installed Bootcamp 2.1 drivers and installed VMWare Fusion. Nothing gets it connected, yet every time the 8900 shows up perfectly in Device Manager.
I installed on my partners HP laptop and it connected immediately in DM. I really need this to work on my Mac (boot camp preferably) and i simply cannot understand why its not working.
Please help me! What am I doing wrong? I've been trying for hours and so frustrated!
Thanks in advance...
Rich

Mac app store will not connect under a managed user account but will under admin. Please help clear this up?

After I have installed OSX Mountain lion I clicked on the app store to buy an app. Only one problem, it says it "cannot connect", I then tried under the admin account and it worked no problem. I log back into the managed user account and disable any parental controls that might be interferring, I try again and it worked. I need the mac app store to work under the managed user with parental controls on. I cleared the iTunes store cache and reset the warnings just to see if that might do the trick but no luck. When the latest update was availble I updated immediatly in hopes of that might fixing the problem but again it did not work. I would really appreciate if anyone had any ideas on how to help solve this issue.
-Thanks

Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM.

9360 not connecting to Desktop Manager

Does anyone have a link to the older version of blackberry desktop manager?
Solved!
Go to Solution.

Hello JenniiYiadom
Welcome to the Community
You can Download from here Archived RIM Desktop Software .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Please help!!! curve 8330 jvm error 102, phone will NOT connect with desktop manager

can somebody please tell me how to fix my problem, phone is froze and i cant wipe it clean to start over or back up. picked up my phone last night and screen says "jvm error 102 reset" i spent several hours trying everything i could find on the net to fix this, but nothing has worked. i dont care if i loose all my stored info on phone, i just need to be able to use it. im in middle of job search and need phone!!

Hey Skootertrash74,
Welcome to the BlackBerry Support Community Forums.
Check out the following artilce on how to force the detection of the BlackBerry smartphone using Application Loader to reload the BlackBerry Software: http://btsc.webapps.blackberry.com/btsc/KB10144
I hope this helps!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

UCCE 10.5: MR PG can not connect to SIP Dialer

Hello,
I have a strange problem with a SIP Dialer installation.
The MR PIM can not connect to SIP Dialer with the following error:
14:32:34:621 pg2a-pim1 Attempting to connect to MR application at IP address: 172.19.10.31, port: 38001.
14:32:34:621 pg2a-pim1 Trace: Transport: Making connection attempt to host1: 172.19.10.31 port: 38001.
14:32:35:713 pg2a-pim1 Trace: Transport: Connection to host1 attempt failed; error 10061..
14:32:35:713 pg2a-pim1 Trace: Transport: The attempt to connect was rejected..
14:32:35:713 pg2a-pim1 Trace: Transport: Make sure that the MR-PIM setup has the correct MR application hostname and port number..
14:32:35:713 pg2a-pim1 Trace: Transport: Make sure that the application is listening for connection at the correct port number..
14:32:35:713 pg2a-pim1 Trace: Transport: Connection closed..
I configured two duplexed SIP Dialers without Port Map. In baDialer logs I can see it can connect to Campaign Manager, CTI Servers, but it received "Port Map With ZERO Ports". Judging by what is written in SRND, this behavior is normal.
14:38:51:052 dialer-baDialer Trace: DialerMetrics::reset(), Dialer Metric subsystem was reset..
14:38:51:350 dialer-baDialer Initializing Event Management System (EMS) library.
14:38:51:350 dialer-baDialer EMS library initialized with write thread.
14:38:51:350 dialer-baDialer Trace: EMS Server pipe cce\Dialer\baDialerEMSPipe enabled for cce\Dialer\baDialer.
14:38:51:350 dialer-baDialer Trace: Release 10.5.1.0 , Build 2572.
14:38:51:350 dialer-baDialer Trace: Received dialer startup request..
14:38:51:350 dialer-baDialer Trace: Monitor Server pipe cce\Dialer\baDialerCmdPipe enabled for cce\Dialer\baDialer.
14:38:51:351 dialer-baDialer Trace: Dialer starting...ICM\cce\Dialer.
14:38:51:351 dialer-baDialer Trace: Using registry key: Software\Cisco Systems, Inc.\ICM\cce\Dialer.
14:38:51:351 dialer-baDialer Trace: Using registry key: Software\Cisco Systems, Inc.\ICM\cce\CurrentVersion.
14:38:51:354 dialer-baDialer Trace: EMT I/O completion ports: max threads=4, concurent threads=0.
14:38:51:355 dialer-baDialer Trace: Current Directory (C:\icm\cce\dialer).
14:38:51:355 dialer-baDialer Trace: Size of call result mapping table: 46.
14:38:51:355 dialer-baDialer Trace: DialerMetrics::Instance, Dialer Manager Creating New instance..
14:38:51:355 dialer-baDialer Trace: The performance monitor object instance (cce) was created successfully..
14:38:51:359 dialer-baDialer Trace: Attempting EMT connection to computer [172.19.10.30/172.19.10.30], port [40032].
14:38:51:611 dialer-baDialer Trace:    EMT connection established.
14:38:52:368 dialer-baDialer Trace: Registering with Campaign Manager.
14:38:52:370 dialer-baDialer Trace: Config received: [1] dialer PortThrottle:15.000000.
14:38:52:370 dialer-baDialer Trace: Trying to connect to server: 172.19.10.31 on port: 42027.
14:38:52:370 dialer-baDialer Trace: socket open on Server=172.19.10.31 port=42027.
14:38:52:370 dialer-baDialer Trace: (CTIPROXY)   Sending CTI OpenRequest for this Dialer.
14:38:52:372 dialer-baDialer Trace: CallListener creating mutex - Global\CCallListener8536.
14:38:52:372 dialer-baDialer Trace: (PM) Update Port Throttle. lPortThrottle=15.000000, dwPortThrottleCount=30, dwPortThrottleTime=2.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: (CLMGR)   CTI Client Event Report Request, invoke: 1, clients: [1].
14:38:53:382 dialer-baDialer Trace: Dailer Status Change,Old Status:cce-Dialer BADialer_SIP -X [CM-X] [CTI-U] [Ports-X] [MR-X] [SIP-U] 0x0.
14:38:53:382 dialer-baDialer Trace: Dailer Status Change,New Status:cce-Dialer BADialer_SIP -X [CM-A] [CTI-A] [Ports C:0,R:0,B:0] [MR-X] [SIP-U] 0x3.
14:38:53:382 dialer-baDialer Trace: (DD)   **** Media Routing PIM is not Connected ****.
14:38:53:382 dialer-baDialer Trace: (DD)   **** All SoftPhone Channels not Initialized ****.
14:38:53:382 dialer-baDialer Trace: (DD)   **** Configured SoftPhone Channels: [0], Initialized: [0] ****.
14:38:54:396 dialer-baDialer Trace: (DD)   **** Media Routing PIM is not Connected ****.
14:38:54:396 dialer-baDialer Trace: (DD)   **** All SoftPhone Channels not Initialized ****.
14:38:54:396 dialer-baDialer Trace: (DD)   **** Configured SoftPhone Channels: [0], Initialized: [0] ****.
14:38:55:410 dialer-baDialer Trace: (DD)   **** Media Routing PIM is not Connected ****.
14:38:55:410 dialer-baDialer Trace: (DD)   **** All SoftPhone Channels not Initialized ****.
I double checked the IP Addresses, MR port(38001), network interfaces order in Windows and everything looks ok.
A possible problem could be that I see no application listening on port 38001 with netstat -na.
Does anyone have any idea what else should I check?
Many thanks in advance,
Cristian

Also, here is an output of the Diag Portico when your MR is up and ports are registered and everything is healthy

Solman SMD managed system not connected

Dear Experts,
I am installed and configured Solman 7.1 sp11 during phase connection Diagnostic agent into solman my ERP and BW diagnostic agent are not connected into solution manager
in smd administration (http://solmanhost:5xx00/smd/smdadmin) agent tab show non_authenticated_agent my solman user SMD_AGT users is not locked and also it's password is OK because I am connected solman diagnostic agent using this user.
Regards

Thanks Both of you Guys for your help.
as per your suggestion I used basis authentication and restart both agent it's work .
Now In basic configuration I stuck in step 3 configure introscope
I already installed Willi Introscope 9 in /usr/sap/ccms/apmintroscope
but when I Import existing installation and give path and SMD agent following error occure
I don't know why it add sap directory ( /usr/sap/ccms/apminteroscope/sap)
please guide me.
Regards

Problem connecting to Remote Manager

Hi,
We installed Remote manager on AD 2008 machine
Then followed AD 2008 connector documentation copied the RM_HOME/xlremote/config/xlserver.cert file to OIM Machine
Imported the RM certificate by using the keytool utility to OIM .xlkeystore
started remote manger.
could not connect through design console by double-click Remote Manager. (No Remote Manager Currently running)
Then copied the oim Certificate (OIM_HOME/xellerate/config/xlserver.cert file) to RM machine and imported the certificate
to RM .xlkeystore and tried again...still could not connect
(could not connect to remote manager in Design console and can't create IT Resource for Remote Manager).
Thanks..
Edited by: IDMuser19 on Nov 10, 2009 10:02 AM
Edited by: IDMuser19 on Nov 10, 2009 10:03 AM
Edited by: IDMuser19 on Nov 10, 2009 10:04 AM

Works fine now..thanks

ICM 7.5 - Campaign manager has crapped out and will not restart

I completed a simple Dialogic test of the dialer ports early yesterday afternoon in which I then checked my campaign skill group config because I could not get an agent reserved so I added my Dialed Number, Saved, Disabled the campaign then re-enabled it to force the update. Checked CM and the process window is gone. We're running 7.5(8). I've already attempted to cycle the logger processes then rebooted because the process would still not come up. Anyone come across this before?
We only have 30 ports and I only tested the first 2 channels. Attached are the

The campaign manager looks like crashes due to invalid object. Did anything change?
23:56:33 la-CampaignManager Trace: Unable to Update the Personal Callback Table; Error Message:
23:56:33 la-CampaignManager Trace: Invalid object name 'Personal_Callback_List'.
23:56:33 la-CampaignManager Trace: Table will likely be created shortly
23:56:33 la-CampaignManager Trace: Connected to Blended Agent private database
23:56:33 la-CampaignManager Trace: Created DoNotCall interface object
23:56:33 la-CampaignManager Trace: Registry Value [CallbackTimeLimit] = [15]
23:56:33 la-CampaignManager Trace: Registry Value [UnknownCallStatusResetTime] = [60]
23:56:33 la-CampaignManager Trace: Registry Value [MinimumCallsForHitRate] = [30]
23:56:33 la-CampaignManager Trace: Registry Value [TimeToResetDailyStats] = [00:30]
23:56:33 la-CampaignManager Trace: Registry Value [RescheduleCallbacks] = [1]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackMode] = [1]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackTimeToRetryBusy] = [1]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackTimeToRetryNoAnswer] = [20]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackTimeToRetryReservation] = [1]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackMaxAttemptsDefault] = [5]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackTimeToCheckForRecords] = [1]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackDaysToPurgeOldRecords] = [5]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackRecordsToCache] = [20]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackCallNoAnswerRingLimit] = [4]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackSaturdayAllowed] = [0]
23:56:33 la-CampaignManager Trace: Registry Value [PersonalCallbackSundayAllowed] = [0]
23:56:33 la-CampaignManager Trace: Registry Value [PendingOverRetryEnabled] = [0]
23:56:33 la-CampaignManager Trace: Registry Value [DialerDetailEnabled] = [1]
23:56:33 la-CampaignManager Trace: Registry Value [DialerDetailBufferSize] = [20]
23:56:33 la-CampaignManager Trace: Registry Value [DialerDetailBufferTimeout] = [5]
23:56:33 la-CampaignManager Trace: Creating Personal_Callback_List
23:56:33 la-CampaignManager Fail: Error: Database table [Personal_Callback_List] could not be created, Error [There is already an object named 'PK_PersonalCallbackListID' in the database.
Could not create constraint. See previous errors.
23:56:33 la-CampaignManager Trace: CExceptionHandlerEx::GenerateMiniDump -- A Mini Dump File is available at logfiles\CampaignManager.exe_20100415235633304.mdmp
23:56:33 la-CampaignManager Unhandled Exception: Exception code: 80000003 BREAKPOINT
Fault address: 7C822577 01:00021577 C:\WINDOWS\system32\ntdll.dll
Registers:
EAX:00000000
EBX:77E68540
ECX:7FFDF000
EDX:0049C8D8
ESI:0012E800
EDI:7C82F34F
CS:EIP:001B:7C822577
SS:ESP:0023:0012DB04 EBP:00000001
DS:0023 ES:0023 FS:003B GS:0000
Flags:00000246
Call stack:
Address Frame
7C822577 00000001 DbgBreakPoint+0

Adobe cloud application manager - can not connect to internet

To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian Cleland

The Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem.

Managed Server can not connect to Database

I have a WebLogic cluster with three managed Server on 3 different machines.
ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
Ravi Jegga

Not possible to open/create a new connection within BT manager on Satellite M40

Bluetooh manager is open and present in system bar.
However it is never possible to open/create a new connection within bluetooth manager as it always say "bluetooh is not ready". Troubleshooting is required but no clear indication is available; button for wireless link is active and I am able to have wifi internet access at the same time.
It is never possible to open access to a PDA or mobile phone for file transfer through bluetooth.
Do i have to reload completely the bluetooth stack or is there another way to troubleshoot the bluetooh system?
Thanks you for replying if possible.

Remove the Bluetooth Monitor software if it is installed. Download the latest BT-stack v5.10.06 here:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/download.php
and install it. Ensure that the wireless switch is turned on and the suitable antenna is selected.
Press Fn+F8 key to select BT antenna. Selection menu only appears if WLAN and BT is inside.
Read the following if you should still have some problems:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

App-Manager does not connect to Firefox OS Simulator on Windows 7

OS: Windows 7
Firefox: 28
Firefox OS 1.2 Simulator 6.0pre8.20140112
When I start the Simulator it opens fine and I can see a Firefox OS Desktop
But the App Manager does not connect. The console at the right bottom just says:
...connecting to localhost:56455 (the port varies)
...connection timeout. Possible causes: didn't click on 'accept' (prompt).
...disconnecting
...disconnected
I disabled my firewall, restarted firefox and even the system - did not help
there is a similiar bug - but I am not sure if we are talking about the same:
https://support.mozilla.org/en-US/questions/988385
Thank you

well - I already knew these links and I can`t find anything helpful there
anyway, I tried the (unstable) Simulator for 1.3 instead of 1.2
this one works fine

Can not connect the database via query string (C#). The SQL Server Management Studio is showing the full path of a location instead of database name.

I can not connect to the database via C#. The database is showing full path of the database file instead of the database name. See the pic: a database showing only name 'emart' and the other database showing the full path.
: Robby

Hi,
According to your post, I know that the database name is showing file path of the database rather than the database name in SQL Server Management Studio. You were not able to
establish a connection to the database using C#.
As Olaf said, was any error message thrown out when the connection failed? How did you create these databases?
You can use the following T-SQL to attach the database and see if the issue persists.
CREATE DATABASE
databasename
ON (FILENAME = 'filepath _Data.mdf'),
(FILENAME = 'filepath_Log.ldf')
FOR ATTACH;
Thanks.
Tracy Cai
TechNet Community Support

Desktop manager and Phone will not connect

Why will my phone not connect to my desktop manager? Please help me?

Are you still experiencing this issue? Have you tried using another USB port or USB cable to connect? If so, try uninstalling and reinstalling Blackberry Desktop Manager for Mac. http://bbry.lv/cjrGPM
Once your BlackBerry connects with the Desktop Manager, you may want to do a clean application load to resolve the issues your device is having. http://bbry.lv/aKuQoN
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Dialer not connecting to campaign manager

Similar Messages

Maybe you are looking for