Dialing a number only by picking up the handset

I have CM 6 and Ip phone 7941/7961
I need to dial an external number when I pickup the handset without touching any button.
I know this was (is) possible with a phone connected to a router with plar command, but not sure how to set this up in callmanager.

yes, it's possible
Hotdial on IP Phones with CallManager Configuration Example
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml
HTH
java
if this helps, please rate

Similar Messages

Can I dial a number on my E71 from the PC via PC S...

Hello!
The small buttons on the E71 make it dificult to dial a number. Is it possible to dial the number directly from the computer via PC Suite? Since PC Suite is opening a window on an incoming call, it should be possible to make an outgoing call.
I did not find anything
- online
- in PC Suite menue
- in PC Suite help
Is there a seperate software nessecary?
Thank you!
Best regards from Germany
Alex

Thank you for your replies.
I am really wondering that I seem to be the only one who has the wish to call numbers directly from Outlook/any other application via his mobile. Since not everybody has a TAPI connection to the telephone system and a headset for the telephone system it would make life so much easier....
Anyway in between I got the hint to try out a software called gnokii (http://www.gnokii.org/). Just from reading this seems to work. I will try it out but appreciate any further hints.
The software "Bluetooth PC Dialer v2.0" from www.bluetoothshareware.com at least does enable the copy paste and dialing via bluetooth (as the name indicates). Not a perfect solution but at least a solution.
Regards
Alex

Blackberry wireless headset HS-700 dials one number only

I just got a new wireless headset for my blackberry curve. It's supposed to be new, in box. Now that it's set up and connected, when I command it to dial a call it calls the same number ... An 870 area code number I don't know. No matter what I tell it.
Solved!
Go to Solution.

Hello BobbiOlson and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having issues with your Bluetooth® headset and your BlackBerry® Curve™ 9300 smartphone.
Does this mysterious number appear in your Contacts?
If you were to go to your Contacts and select the number to dial, are you able to manually dial the number or does it default to the 870 number?
If you disconnect the headset does this still happen?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Fax number is not picking from the ship to party to send COA

Hello,
To fax COA, output type in delivery is not picking up fax number from customer or from partner function.
Condition records are maintained for partner function ship to party and condition records and output determination procedure is also assigned.
Can anyone guide what is missing to pick up fax number from partner function ship to party or sold to party?
Thanks

Hello Sandeep,
Thanks for your response!
yes it is maintained there for ship to party. my question is at delivery item level, if I select output type and check the communication method for FAX, it is showing blank or sometime wrong fax number.
I am expecting to pick up fax number which is maintained at XD02 for the ship to party by refering condition record vv22. Here, I have maintained fax details in contact person of that parner function in the sales area of customer. Else, you can guide me the right procedure to sent COA fax to recipients.
Hope above information helps you to understand my issue, else I will elaborate more.
Thanks

Sales Order Number is not picked in the shipping trasaction.

Hi,
After creating a sales order,then navigating to shipping trasaction and giving sales order number and then
when i am clicking find button,the following error is coming in OM R12.1.1
APP-WSH-231210:An unexpected Error Occured for line 388298.The Error is:ORA-04062:signature of package "APPS.WSH_DELIVERY_DETAILS_INV" has been changed.
why i am getting this error?
Thanks in advance.
Regards,
Bharathi.S

Hi,
The package WSH_DELIVERY_DETAILS_INV is invalid in your instance as you are getting "Signature of package apps.WSH_DELIVERY_DETAILS_INV has
changed" error message...
Recompile the Invalid objects and hope this will solve your Shipping transaction issue...
Regards,
S.P DASH
Edited by: spdash12 on Sep 15, 2009 5:33 AM

I've imported several CDs that are "collections", with songs by various artists. Only a PORTION of the song info appears in iTunes, and, when a song is "clicked-on" to play it, a message appears that the "song could not be found". Any ideas ?

The CDs are imported into the "iTunes Media" folder, under "Compilations". Each CD has a folder, with the name of the CD. However, EACH SONG in the folder is assigned a sequential number as a prefix before the song's name. For example "2-1 Sunshine of Your Love." This prefix, I believe, prevents the song from being imported into the iTunes library. The song's name appears in the iTunes library (with the number prefix), BUT no other song info (artist, CD name, time, etc.) shows in the iTunes library. I am NOT designating these CD's as "complilations", but somehow, iTunes is arbitrarily assigning them to this "Compilations" folder, and then assigning sequential numbers to each song. I am confused. (My only remedy is to MANUALLY remove the prefix number from each song in the CD folder, within the COMPILATIONS folder, then "re-import" it into iTunes. Cumbersome.) Thanks in advance for any opinion, tips or guidance.

The numeric prefixes in filenames are probably the optional disc number, followed by the track number. iTunes will pick up the Compilation flag from the Gracenote CDDB database if you ripped the tracks with iTunes, or the flag may have been set earlier if these are existing tracks you have imported into a new library. The iTunes naming convention is <Artist>\<Album>\[<D#>-]<T##> <Name>.<Ext> where Album Artist is used instead of Artist if not blank, and Compliations is used instead of Artist when Part of a compilation is true. Empty Artist or Album values are replaced with Unknown Artist or Unknown Album respectively. With Windows, file and folder names are limited to 40 characters. If more than one file is added with the same details subsequent tracks get suffixes to separate them.
If iTunes can't find a file that usually means that it has been moved after it was added to the library. Select a single broken track and press CTRL+I to Get Info. Look on the summary tab at the location that iTunes expects to find the file. Where is it really? Post back both paths and I might be able to figure out what has happened, and suggest a fix.
tt2

How to stop phone from dialing other numbers while I am on the phone

Hello everyone one out there!! I have had the iphone for over a month now and I am very happy with it so far. I was somewhat hesitate from buying after reading all the horror post that users have been leaving, but with anything I must try it out myself to make my own opinion. I am very impress with my purchase. The only problem that I am having is, when I am making a call and having conversation with someone my cheek will touch the touch screen and start either instant messaging someone or calling someone. Is there a way that after I dial a number I can turn off the touch screen so that my cheek will not interfer. Any advise?

As has been mentioned, there is a proximity sensor which is supposed to inactivate the touch screen when it is up against your face.
By any chance, are you using a case with your iPhone? Some cases may partially or completely block the proximity sensor and prevent it from working. Try removing your case and see if things start to work normally.
If the problem persists, you may have a broken sensor and need to get it repaired by Apple.

Is there a URL to open phone app (not dial a number)?

Hey Guys,
So I'm using Launch Center Pro (loving it, by the way) but I've come across a bit of an issue. I put in most of the numbers I dial into LCP to act as a speed dial and, as a result, relocated the phone app to the last page of my iPhone. However, if I get a voicemail and miss the notification I have to swipe all the way to the last page to open the app and access them. I'm wondering if there's a URL (like LCP uses, some variation of tel://) that allows me to simply open up the phone app or, if possible, open to the voicemail page? I noticed that when you do dial a number in LCP it opens the prompt window in LCP and not the dial screen in the phone app.
Thanks for the help!

MikeThomasmusic wrote:
...there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
In my experience advising Logic users, depending upon the version of Logic and the model Mac you are using, if your Mac will boot from Snow Leopard, you can install Logic and all of its plug-ins in Snow Leopard and then upgrade to Mavericks.

Using "Number Only" yet still "Chapter" in Portrait Index

I am using iBooks Author for a collection of short stories so I'd like to eliminate the word "chapter" from the "chapter" page which is displayed in Portrait mode. I used the "Number only" feature to eliminate the word "chapter" from the heading of each chapter. So far so good. But when I review the book on the iPad, the "chapter" page with the thumbnails still has the word "chapter " displayed. See image attached.
Any suggestions appreciated.
Thanks.

Dear IMacUser2012
Did you get any solution on this query ,
Can any one suggest me on this

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?

my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server

Why can't I tell Siri "No" to stop dialing a wrong number? It's embarrassing to keep telling the same people over and over that I mistakenly dialed their number. Even if I yell "stop" or "no" it keeps dialing. Very frustrating.

Why can't I tell Siri "No" to stop dialing a wrong number? It's embarrassing to keep telling the same people over and over that I mistakenly dialed their number. Even if I yell "stop" or "no" it keeps dialing. Very frustrating. Even very simple names. And I talk on the phone for a living. Which is why I need to use Siri to save me time. I speak very clearly. Because of this problem, I've had to even add special code letters before people's names to increase the chances of Siri getting it right, which is only about 70% of the time.

That is not a feature of Siri. Submit your feedback requesting such a feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Note that yelling at the phone does not improve the chances that Siri will understand you.

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

paulcb wrote:
Using the Bold Text Accessibility option does make the keypad numbers a little bolder.
Yep - I was only looking at Text Size.
But still, not sure what the deal is. The "1" is just as readable as any other number on the keyboard regardless.

Dialing a number in the Phone Book from the phone

If I enter a phone number in the Phone Book in the MyVerizon webpage, how do I select that number to dial from my phone?

From your phone there is no way to make a call using the online contacts. You can use your computer to initiate the call. You can read more about. I have copied the instructions below that I have gotten from the user guide at http://www36.verizon.com/fiosvoice/userguide/User_Guide.pdf
To place a call using Calls and Messages Log:
1. Sign-in to your
Account Manager.
2. Click on the name or telephone number of the person you would like to
call from the “Calls and Messages” Log.
3. A pop-up window will appear. Select “Call Back” from the menu.
4. A second pop-up window will appear asking if you want to dial that
specific number or enter a new number. Click “Dial”.
5. Your phone line will ring once the call is placed. Pick up your phone and
wait for the person on the other end to pick up.
To place a call using your Phone Book:
1. Sign-in to your
Account Manager.
2. Select “Phone Book”.
3. Find the name of the person you would like to call.
4. Click on the name and select “Call” from the drop-down menu.
5. A second pop-up window will appear asking if you want to dial that
number or enter a new number. Click “Dial”.
6. Your phone will ring once the call is placed. Pick up your handset and
wait for the person on the other end to pick up.
To place a call from your Account Manager icon:
1. Sign-in to your
Account Manager.
2. Click the “Place a Call” icon.
3. You can
a. select a recently called number by using the dropdown menu (the
last five numbers recently dialed will be displayed) ,
b. manually enter a number, or
c. Click “Browse Phone Book” to select a number.
4. Once the number is entered, click “Dial”.
5. Your FiOS Digital Voice phone line will ring once the call is placed.
6. Pick up your handset and wait for the person on the other end to pick
up.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed. I get the opening window where it says installing plugins searching etc, after which PS opens in full screen. Just moments after that there's a fail warning, no code number, only

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed.
I get the opening window where it says installing plugins searching etc, after which PS opens in full screen.
Just moments after that there's a failure warning, no code number, only the warning that PS failed to open and PS will close.
I tried downloading it for a second time, but this did'nt solve the problem.
Befor the CC version I used a one year student version of Adobe CS6.
What can I do?

Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

I have a brand new IPhone 4G. For the life of me, I can't get the phone to ring. I have been in and out of my settings, have disengaged both silent and vibrate. But when dialing my number from another phone, the call goes direclty into my voice mail

I have a brand new IPhone 4G. I can't get it to ring. I have gone into settings and disengaged vibrate, and have engaged the ring button on side of phone. But everytime I dial my number from a different phone, it doesn't ring. Rather the call goes directly into my voice mailbox (ogm heard immediately); not even one ring! Please advise

Well, if it goes to VM immediately the call isn't reaching your phone, so no wonder it isn't ringing. Do you see a network displayed in the upper left of the screen? Have you activated the phone by connecting to a computer with the latest version of iTunes? Have you called your carrier to make sure they have provisioned it correctly?

Dialing a number only by picking up the handset

Similar Messages

Maybe you are looking for