Dialing number phone prompts for To:UNKNOWN NUMBER instead of Enter Code

I have successfully Applied FAC (force authorization code), after dialing number phone prompts for To:UNKNOWN NUMBER instead of ENTER AUTHORIZATION CODE to complete the call, Also I would like to extend the delay for few more seconds so user can get enough time to enter code before busy tone.

Dear, I am unable to find any option which may let me configure the PROMPT from SERVICE PARAMETERS => Cisco Call Manager ...., which must be set ENTER AUTHORIZATION CODE whenever user dials long distance call. We have CCM 4.1.2

Similar Messages

I think I've been hacked? A few days ago my phone asked for my Apple ID and I entered it not thinking anything of it and now I've just been in my music library and there is a whole album of songs by an artist that I have never heard of? Help?!

Basically my iPhone 4 asked for my Apple ID and I entered it thinking it was just some check or something and then I've just been scrolling through my music library and there is a whole U2 album there and i have never even heard of U2... i clicked on one of the songs to see what it was and it came up with "This device is already associated with an apple ID. If you download past purchases with your apple ID, you cannot auto download or download past purchases with a different Apple ID for 90 days."
I Can't delete the album like I can with my other music from my phone and I don't really want to connect my phone to my laptop incase I have been hacked and it could give the person all access to my phone?
Pde lease help me out, I don't know what's happened:(

Do the half billion copies of the album they gave away count as "sales"?
Let's see... An album has to sell 500,000 copies to go gold, 1,000,000 copies to go Platinum, 10,000,000 copies to go diamond... What will they come up with for 500,000,000 copies sold?
Something radioactive would be cool... though difficult to display safely on the wall...

3750X Prompts for Device/Enable Password Instead of Local Username/Password

I've got two 3750X switches that were built from a fairly basic template from my existing 3750/3560 switches. However, these new switches ONLY prompt for the device/enable passwords instead of the configured local username/password when connecting by console/telnet/ssh. Here's the config that I think is relevant, sans password strings. Only real difference is that the new switches are running an IOS 15.2 build, the 3750 switches are running 12.4, and the 3560 is currently running 15.0 (pending an update).
enable secret 5 string
username Administrator privilege 15 secret 5 string
line con 0
password 7 string
login local
line vty 0 4
password 7 string
login local
length 0
line vty 5 15
password 7 string
login
length 0
Any way to correct this?
Thanks!

usually you need "login local" under all the vty lines in order to authenticate locally unless you use ACS server for authentication.
HTH

IWork, 1 computer, 2 user profiles, both prompted for license...

I recently purchased the Single User iWork 08 for my MacBook Pro. I installed it as one user profile (prompted for Administrator authentication), and completed the installation. When first started up a iWork 08 application I was prompted for the license key, which I entered... I later quit the application.
I logged out and logged in as another user profile on the MacBook Pro and attempted to start one of the iWork applications, and was surprised to get the license key prompt again.
Where does the license key have to be located so that all my user profiles on my MacBook Pro no longer get prompted for the key?
Thanks!

I think you probably went wrong when you checked the single profile / user box on installation; whether this can be corrected through Preferences or require reinstallation I don't know. Copied below is an extract of the licence agreement which refers to the number of computers rather than the number of profiles used on each, so I think you should be OK- you may however need to re-install.
B. iWork Single User License. This License allows you to install and use one copy of the Apple Software (whether trial or full version) on a single Apple-
labeled computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple
Software available over a network where it could be used by multiple computers at the same time. You may make one copy of the Apple Software in
machine-readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the
original.
C. iWork Family Pack License. This License allows you to install and use one copy of the Apple Software on up to a maximum of ﬁve (5) Apple-labeled
computers at a time as long as those computers are located in the same household and used by persons who occupy that same household. By "household"
we mean a person or persons sharing the same housing unit such as a home, apartment, mobile home or condominium. This license does not extend to
students who reside at a separate on-campus location or to business or commercial users. You may not make the Apple Software available over a network.

Locked out of phone, asking for "password." How to get around this without factory reset/destroying data?

My Galaxy S4 decided to password protect itself... no idea why. I usually use the Lock Screen pattern, when I screw that up enough it prompts me for a PIN. I guess that's what happened, but after I got in after doing entering the PIN, I didn't reset my PIN or pattern, so now it's asking me for a password to get into the phone.
I've tried using Android Device Manager to send the phone a new password... it doesn't work. When I send an integer only password the phone prompts for a PIN, but it doesn't accept the PIN I send, and when I send it a alpha-numeric password, it prompts for a password, but doesn't accept that either. Clearly the phone is acknowledging the receipt of new protocol.... but it's not adhering to the new directions.
Anyone know how get around this? Or another method that doesn't require me destroying all of my data? Or a way for me to retrieve my data without having to manually select "Use as Media Device" (can't do this since I can't access the drop down menu).

Thanks for trying all those steps already, Salos. We don't have a way to retrieve any passwords set up on your phone for the lock codes or accounts. Based on your description, it sounds as if it may be asking for your Google account password. It's the fallback for many Android-based devices when a lock passcode/pattern/PIN is entered incorrectly too many times. Try logging into Google.com with the Gmail email address you set up as your main account for the phone to ensure you have the correct username and password combination. Then try entering that same information on the phone when prompted. It's important to also make sure the phone is in an area with a good data signal (WiFi or 3G /4G LTE). If you are unable to access the phone using any passwords or PIN that you created, then the reset would be the final step but will result in the loss of the data on your phone.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

How do I change my incoming calls to view caller's phone number instead of name? This is for numbers not stored in my contacts (i.e. Unknown)

How do I change my incoming call view to see the "phone number" instead of seeing "Unknown" for contacts who are not stored in my phone? Whenever a call comes in it says unknow instead on the phone number that is calling.

You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
That way you can quickly log in to your own account - then back to his.
You should obviously have different passwords.

BE3000,E1 line out, internal IP PHONE normal phone call, phone prompt reversal of "The number dialed is empty" how to solve

HI,
BE3000，E1 line out, internal IP PHONE normal phone call, phone prompt reversal of "The number dialed is empty" how to solve
thanks

We need traces to figutr out what the problem is. Please make the call, download traces from the diagnostics page and send it.
Thanks

How do I dial a phone number from Forms6i ?? OLE2,DDE??

How do I dial a phone number from Forms6i ?? OLE2,DDE??
Is it do-able??
I have a contact form that has the contacts phone number, etc... I would like to add a button to dial the number which would open the phone line (probably through my modem) and dial the number ... where I would pickup the receiver and wait for connection...
I need an example or a "How to" link or something where if I take the time I can get it working....
IF not, is there software to do it?
Thanks, Bill

Yes, great! I will check into my modem... but I remember years ago have a c program that I used to send error messages through the modem to my alpha-numeric pager. With that I started with that c program being called from REXX IBM language and it spoke modem language...
Is there another forum that would handle this type of request? what do you call telephone support? telephony? communication links? ....
Thanks for the input!

Need to dial a phone number from Cold Fusion

My boss asked me if there was any way that a phone number
could be dialed from Cold Fusion. We have a website where at some
point we want to just click a button and dial that phone number. My
guess is that the conversation will then be carried through the
computer's microphone and speakers and using the computer's modem.
Let me know if there is a way, or what would be the easiest
way to accomplish this, even if it has to be using VOIP, since
that's an option for this project.
Thanks!

Is this an internal site or an public-facing site? If you are
talking about using this tool in your intranet and you have a
modern phone system in place, there may be an API to interfacing
with your phone system. We use a TAPI interface to create a phone
dialer so our callcenter agents can dial a phone number on their
phone just by clicking on a link. I'm pretty sure there are a bunch
of freeware/shareware TAPI COM objects you can use floating around
the interwebs (If your phone system supports TAPI).
If you are talking about a public-facing website, then I'm
afraid I can't offer much advice other than to check out the Java
Communications lead that Ted gave you.

Dial a phone number embedded in a PDF document ...

Hi,
I cannot press on the phone numbers in my PDF document on my iPhone. Is it possible to dial a phone number embedded in a PDF document by pressing on it ? Is there a work around for that ?
Regards.
Robert Lespérance

No you can not do this.

CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]

Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil

How can I dial a phone number from an email message directly

How can I dial a phone number from an email message directly,
But even before the selection i will change or correct the number?
If I copy the number in the notebook, all spaces are filled with % signs.
When I dictate SIRI the number I get the answer: I do not know the number
If I copy the number in the phone selection (above) the number can not be edited afterwards.

You can dial a number appearing in an email by tapping on it.
But if you need to correct the number first you cannot edit a received email.
To edit the number tap on the forward symbol and when the draft comes up you should be able to correct the phone number, copy it and paste into your Phone App. Then delete the forward email without sending it.

I have just transferred my application file from an Imac to an identical Imac, both running OS 10.9.5. When I attempt to open Photoshop 6, I am prompted for the serial number. I enter the serial number provided by Adobe, which I have confirmed with my "pr

I have just transferred my entire application file from an Imac to an identical Imac, both running OS 10.9.5. Everything works fine, excepting that when I attempt to open Photoshop 6, I am prompted for the serial number. I enter the serial number provided by Adobe, which I have confirmed with my "previous purchase" records kept by Adobe. It is demanding a "qualifying product", all of which is contained in the complete files I transferred. Why can't Adobe recognise my valid serial number for Photoshop 6?

I have just transferred my entire application file from an Imac to an identical Imac,
Say what?
Please use the proper installer.
Are you really talking about Photoshop 6 or about Photoshop CS6?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.

Hi there. I bought and downloaded photoshop elements 13 today. When I tried to set it up and was prompted for the serial number, the one I was given and subsequently entered ( correctly ,I checked numerous times) was seems invalid. What's the next step?!

hi there, I bought and downloaded Adobe photoshop elemts 13 today. When trying to set it up, I was prompted for the serial number which upon being entered was deemed invalid. I know the serial number is the correct one. What is the next step, how do I contact Adobe store?!?

Error "The serial number is not valid for this product" | Creative Suite
if that doesn't help, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Dialing number phone prompts for To:UNKNOWN NUMBER instead of Enter Code

Similar Messages

Maybe you are looking for