Dialling from 7960 - speed dial works, manual dial fails

Hi, i've got an issue on a dialling a particular number from 7960 phones. When i dial a speed dial setup with the number 9121000 i hit the correct route pattern and the the 9 is stripped and an external call is placed to 121000 through my gateway.
if i dial 9121000 manually the call fails, and the 7960 display looks like its attempting to the 4 digit internal number 1210
I can't work out why this would work differently through speed dial and manual dial - any ideas?
thanks in advance for any hints

This is because you have overlapping pattern i.e. TP or RP, DN extension, etc with urgent priority set on it.  Locate it and disable urgent priority.
HTH,
Chris

Similar Messages

  • I have an ipod touch 4th gen and I have songs on it which I cannot remove, even when I sync it and untick the songs they will not remove from the ipod, doesnt work manually either, help

    I previously had an ipod nano but now have an ipod touch, when I synced it for the first time I got songs on to the ipod which I dont want, I have tried unticking them in itunes library and this doesnt work.  I have also tried going to summary to remove manually but it doesnt show any songs in this box to be removed.  Can anone help please.

    Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
    Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
    If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
    Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
    Do the same again and choose "backup", to create a manual backup without syncing.
    Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
    Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

  • ITunes 10.2 Upgrade fix temporary. Fix to iTunes 10.2.2 by uninstall Apple Mobile Device Support and install AMDS from 10.0. Worked only to fail in 5 days. iTunes back to very slow to open and will not see device (iPhone) connected. Sorry

    I was one this site for 20+ Days and found a fix for 10.2.1 when it failed. I Uninstalled all, following other attempts that failed, then installed latest Version from Apple iTunes 10.2.12. I then uninstalled Apple Mobile Device Support (AMDS) and installed AMDS from the older 10.0 version of iTunes. Success it worked. Today, I am now back to old problem, iTnes takes very long time to open and fails to see my device when connected (iPhone). I really only have iTunes for my iPhone no extensive library a few hundred CD's in music location and no podcasts. I have less than 6 moveis and want to update them now. I am willing to lose all in iTunes library if need be just to get computer to see G3 iPhone with iOS 4.2 and let me synch once again. I like security of backup too. It older iTunes may now not support, that too is OK. I still want to get the 3GS (no 4G desires, yet) and do not care if any of it is the latest from Apple as long as it works.

    Hi Erik,
    Your basic suggestion actually worked for me. But this is what I did for others who are having issues removing/installing etc.
    1. Download the latest iTunes 8.2. You should end up with a file iTunesSetup.
    2. If you dont already have WinRAR, download free copy from http://www.rarlab.com/ and install.
    3. Right click on iTunesSetup and choose "Extract" to somewhere you know. eg C:\itunetemp
    4. Open up folder where you extracted iTunesSetup and double-click applemobiledevicesupport.msi
    5. It should ask you if you want to repair or remove... choose remove.
    6. REBOOT your PC.
    7. Go back to where you extracted iTunesSetup and double-click applemobiledevicesupport.msi and go through the install.
    8. Plug in your iPhone.
    If all is well iTunes should automatically start and start syncing your iPhone.
    Goodluck all!
    Cheers.

  • I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

    I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..

    Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
    If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
    If it was never registered to your account then it won't appear on your support profile : https://supportprofile.apple.com/
    The only other ways to find it that I know of (apart from on the actual device) are via the packaging, the backup on a computer's iTunes : http://support.apple.com/kb/HT4061

  • N73 Firmware upgrade--- bad working Voice dialing

    I updated the firmware of my Nokia N73 from 268.0.0.3 to 368.0.0.1. With the older version delivered by the phone voice dialing worked. In the 268.0.0.3 I only could given voice command for the profiles not for the contacts. It didn't recognise any contact. Because of thos I decided to do the next firmware upgrade to 368.0.0.1 and now the voice dialing doesn't work at all. Each time I put the button to activate it tells me "fualty voicesystem"in dutch "fout spraaksysteem. Now it became even worser. Is there anyone who helps me out?
    regards

    16-Dec-2006
    03:34 PM
    conradus wrote:
    Thank you for your reaction. I put the firmware for the second time to my phone. Now it seems working again. When I touch the button for voice dialing it works untill then. But I may ask for every contact in my contactlist but nothing happens. When I touch the button again it is not reacting then but only the second time. When i asked for an other profile it sometimes works. In my contactlist it is possible to hear the contactname. But via voice dialing none of the contacts to choose.
    best regards
    Voice Dialling seems to be a bit choppy on most of the N-series models, because they use speech synthesis. Whereas this works for profile names, it's a different tackle for contact names. This is because contact names are assigned by assigned by you, the user. If you select Play Voice Tag for any given contact in your phone, it will output this name using speech synthesis. You will have to EXACTLY copy this output. And, if the name of a certain user is "John Doe Geralds", it wouldn't suffice to simply say "John Doe". You'd HAVE to put Geralds behind that, and in the EXACT same way as the device says it.
    The only way to change a voice label for any given name is to change the name itself. The same goes for profile names and commands, but I wouldn't change these as the defaults work fine.
    A reason because of which voice dialling may not work can also be found in the user's voice details having become useless for the phone. To correct this, go to Tools> Voice commands > Options > Settings and choose: Reset Voice Adaptations. Note that carrying this out means that ALL data collected about your voice shall be lost; you might have a bit of difficulty using voice features the first couple of times after performing this instruction. Beware to EXACTLY copy whatever the phone says, even though you know real-world pronunciation to be different. Until now, I haven't had to actually adjust the pitch of my voice to the synthesizer's pitch, but I know this would improve recognition accuracy.
    Oh yeah... Sorry for my late reaction!
    Best regards,
    V3.0704.1.0.1
    19-01-2007
    RM-133 Nokia N73(57.01) Product Code:0539338

  • Unable to get Phone Dialer working

    Hello everyone,
    I have setup a brand new client. And I am unable to get the dialer working correctly.
    I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009
    - Telephony service is started
    - Windows XP Phone and Modem settings correctly configured
    - Phone Dialer does work and does show the progress of the "manual" test call
    - Phone Dialer is running and minimized
    - SAP/b1 General Settings/Service is setup with an area code.. nothing needed for an outside line
    When I pull up a Business Partner and hover over a phone number, I hit CTRL+TAB and nothing happens... the next field is just highlighted and no dialing occurs.
    Any thoughts as to what I'm missing to get this working correctly?
    All input is welcome.
    Thanks!
    ~ terry o.

    Finally got this working. Please setup your dialer using these directions;
    - Telephony service is started
    - Windows Phone and Modem settings correctly configured with any required settings like area code or country
    - Run Phone Dialer (dialer.exe) and confirm it does work and does show the progress of a "manual" test call
    - Change SAP/b1 General Settings/"Service" is setup with an area code.. and outside line requirements
    Open SAP/b1 and hover your cursor over a phone number. When the "phone" icon is displayed, press "CTRL + double-click".
    The dialer should open and you should see the progres of your call.
    Good luck!
    ~ terry o.

  • In contacts that i have sync from my computer, i want to dial a number which is in notes

    in contacts that i have sync from my computer, i want to dial a number from  notes

    Tap on the number in the notes section and a menu should pop up that include Copy. Tap Copy, then either paste into one of the phone numbers in the contact, or paste into the dialpad (to paste tap once in the field and a menu will appear).

  • Siri does not work to dial a number on my Iphone 5 since a digit was added to the number in Ecuador

    Siri does not work to dial a number on my Iphone 5 since a digit was added to the number in Ecuador

    Hola Classo, encontré una solución en estos foros. Solo agrega un signo + al final del numero al que quieres llamar desde Siri.
    por ejemplo: 0998345789+
    Cuando haces eso, igual puedes llamar, igual puedes usar facetime y iMessage.
    Y siri ya llama.
    Es al menos una solución temporal hasta que Apple pare bola.

  • HT204150 sometimes a contact appears to be 'lost' on my i-phone4S, but when I manually dial the number the info appears although it is not visible in my contact list.

    Sometimes a contact appears to be 'lost' on my i-phone4s, but when I manually dial the number the information is visible, however, not on my contact list.  I am running iOS6.0.1.  Anyone else have this issue?

    Yes, but the limit is 25,000.
    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

  • DVD's from IDVD no longer work in a Blue-Ray DVR for television.  Who changed what and why?

    DVD's from IDVD no longer work in a Blue-Ray DVR for television.  Who changed what and why?

    Hi
    What BRAND of the DVD used ?
    What type of DVD ? SL-DVD-R or DL-DVD-+RW or ?
    Burn Speed ? Did Yo set it down ? I do to x2
    Cleaning DVD disk (not with liquid but the ones with brushes) - I use from time to time ?
    Free Space on Start-Up (Maintosh HD) - How much ?
    Yours Bengt W

  • TS2972 First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first

    First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first night.

    The speed may have been ok at that time and is too inconsistent/too slow overall. interference may have proven to be more of an issue since as well. If using public DNS that will provide Intermittant results
    I'm sure using a hotspot would be fine but it depends on your viewing habits. An HD movie is around 4-5GB. It would also be subject to speed. requirements so best to test to see how it compares.
    You would have to check with your Carrier if hotspot it's enabled then just to into your settings and toggle it ON

  • I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail and Contacts  do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

    I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail (crashes) and Contacts  do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • When I cut and past text from Firefox to Microsoft Works I get an error stating 'Out of memory, close applicantions and restart windows'. This does not work. When I had IE I never had this issue. Help!

    When I try to cut and past text from Firefox to Microsoft Works I receive an error that says 'Not enough memory, close applications and restart windows'. This never works! I never had this issue with IE! How can I fix this issue?

    If the crashing only happens with other peoples projects it could be for a variety of reasons. There are tons of asset references saved in the library (the location every item was imported from) and much more. None of those locations will exist on your system and internal complications may simply happen, especially with any runtime shared assets.
    If possible you should consider adding more system RAM so you can multi-task. RAM is extremely cheap. I'm assuming from a smaller 500GB HD and 4GB RAM that you're probably on a laptop however. Installing RAM is still usually pretty easy if you have the notebook manual (or grab it online). It typically involves just lifting the keyboard or opening a single panel on the bottom of the notebook but it varies greatly. At any rate, 8GB RAM would help you quite a bit. If you do, just make sure you get the correct type of RAM (again, in the specs in your manual).
    Even when you run out of physical RAM, Flash (like any other application) will still see more RAM based on the OS's swap memory setting (using available space on your HD as RAM). It will get much slower but Flash should see the total amount the 32bit OS can handle for RAM (it doesn't know if it's physical fast RAM or SWAP (fake) HD RAM though). If you open other apps with Flash they should also operate, but will also use swap RAM and you've probably noticed your HD crunching a lot while more apps are open.
    That said, I have a 4GB RAM in my older i7 lappie and have used Flash CS5.5 and CS6 on it extensively, with other applications open. Although my projects contain mild assets and mostly tons of code. No issues at all. I just think your heavy assets are crashing you.
    Either way, glad you got your work done. You're welcome and good luck!

  • HT1766 After during a backup on iTunes I noticed 3 of my contacts are gone and tried to restore from a old backup, worked once and now it won't again. Why iTunes restore work correctly?

    After I did a backup from iTunes I noticed 3 of my contacts were gone and then tried to restore from a old backup, worked once and now it won't again. Why is iTunes restore not working correctly?
    I thought all my contacts were saved in iTunes, never had this problem before. Besides manually restoring them myself, is there any other way to retrive them?

    iCloud
    https://www.icloud.com/

  • Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

    Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

    Without proper system information and the application logs nobody can tell you much.
    Troubleshoot Creative Cloud download and install issues
    Mylenium

Maybe you are looking for