Dialling the "+" symbol bug on iOs7

Hi, I've got iPhone 5 with recent iOs 7.0.2 installed. Here is the issue I encounter: when I try to dial the + symbol (it used to be a simple press and hold the 0 key), just 0 appears, no matter how long you hold it. The workaround is to hold 0 and then press backspase while it beeps... ))) This is a joke and makes absolutely no sense at all! It would've been funny, if not the money I've paid for the gadget...

Have to clarify something - it eventually enters the + sign, but it also dials 0 first. So, press and hold 0 for few seconds results in
(0+ )
If it's not a bug, what is it then?
I'm glad to hear your device works properly, but please, don't advice me something like switch off / back on stuff...

Similar Messages

I have just tried to instal the ios7 update that fixes the bugs in ios7 and it wouldn't install onto my phone - an error occurred so my phone is not frozen. what do I do?

I have just tried to install the ios7 update that fixes the initial bugs in ios7 and it wouldn't complete the install - an error occurred. now my phone is frozen and inoperable. what do i need to do to fix?

Hey dougpm,
Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your iPhone with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
Please confirm.
iPhone 4, iOS 7

Hello jayanand,
You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
iOS: Force an app to close
http://support.apple.com/kb/HT5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

My songs are missing in the music and the used memory doesn't change. Is it a bug for IOS7? How can I fix it?

I plugged my ipod touch 5 via usb to the pc and browsed my music on itunes. And suddenly i played some music and there's a exclamation point before the song. I haven't deleted that song or moved. And the whole album was gone. And i checked the number of songs on my ipod and it decreased without change in memory used. Is it an another BUG for ios7? is there a way to fix it?

That indicates the song files are not corrupted.
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
An large "other" usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

WHEN WILL THE MUSIC SYNCING BUG IN IOS7 BE FIXED?

WILL AN **APPLE REP** PLEASE REPLY ??
My library randomly skips songs after upgrading to IOS7.3. This is probably not related to Mavericks, as Windows users are complaining about the same issue. I have tried ALL of the suggested fixes, wasting many hours of time needlessly dealing with this issue. The music syncing bug with IOS7 is completely unacceptable.
I have unsynced, re-synced, made a playlist with all of my tracks, done a full restore, and transferred purchases. After it seemingly copies all of my songs over, it still skips random tracks when I shuffle my songs. I then connect to iTunes, go to devices->transfer purchases, it copies the songs that were skipped, and then other songs skip.
THIS IS SOMETHING WHICH USED TO WORK AND NOW IS BROKEN.
There have been threads on this issue since at least October. Why has this not been addressed ? Music playback is a core feature of IOS devices. I have spent quite a bit of money actually buying music from Apple on my phone, and cannot listen to it. Is this just a ploy to force everyone to pay for iTunes Match (which would probably not work anyway?) I have been an Apple user for over 20 years, and this is really disconcerting. I hate to say it, but if Steve Jobs were still around, heads would have rolled over this issue by this point. All the pretty icons and UI tweaks in the world are less important than actual working functionality. What has become of AAPL ?

colingoldberg wrote:
WILL AN **APPLE REP** PLEASE REPLY ??
No, this is a user-to-user forum. If you want to speak to Apple Technical Support folks, you'll either need to make an appointment at the Genius Bar at your local Apple Store or call them directly. Use the Contact Us link at the bottom right of every page.
Best of luck.

"copy and paste text within symbol" bug

I am sure this has been discussed, but have not found it using search.
Follow these steps to demonstrate a "Symbol Text" bug (CS5 through CC 2014):
Create Symbol containing editable text.
Edit symbol by selecting and copying a portion of text at "Character" level in the Symbol
Paste as point or paragraph text.
The result is: ALL the text from the Symbol is pasted into the Point or Paragraph text object, NOT just the portion that was copied.
This bug has been present in AI at LEAST since CS5 and probably before. I'd sure like to see it fixed.

Ray,
I'm using C5 also.
What I get is the copied text plus all the text in the symbol.
Peter

Since I have iOS7, I can't have any USB connexion with my Macbook pro!!!! even after another my iphone was exchanged, I think there is a bug in IOS7!!!

Since I have iOS7, I can't have any USB connexion with my Macbook pro!!!! even after another my iphone was exchanged, I think there is a bug in IOS7!!!

philippefromfra wrote:
Since I have iOS7, I can't have any USB connexion with my Macbook pro!!!! even after another my iphone was exchanged, I think there is a bug in IOS7!!!
Sounds like a bug in Macbook pro. May be bug in the cable? Everything bugged up on you.

A Bug in iOS7 Using Siri with in Car Bluetooth

I have a near new Hyundai SanteFe with built in bluetooth. Under iOs6 it worked fine when listening to CD, Radio or Music from the iPhone. Now, if I use Siri when using Radio or CD it still works fine. However if I am listening to Music app on the iPhone , using the aux input, when I press to use Siri, either from the bluetooth button in the vehice or from the iphone itself, there is no input from the mic to Siri. Siri comes up but only tells me what kind of questions I can ask, there is no connection from the bluetooth Mic to Siri itself.
As it was OK in iOS6, I assume that it is a bug in iOS7.

Did you ever figure this out? I have the same problem in an Audi A4

Encountered the symbol create

Hi guys I am trying to :
CREATE or replace TYPE Complex AS OBJECT (
rpart REAL,
ipart REAL,
MEMBER FUNCTION plus (x Complex) RETURN Complex
CREATE TYPE BODY Complex AS
MEMBER FUNCTION plus (x Complex) RETURN Complex IS
BEGIN
RETURN Complex(rpart + x.rpart, ipart + x.ipart);
END plus;
end;
with Oracle Sql Developer 2.1 and 11g, but I get Error(6,1): PLS-00103: encountered the symbol "CREATE".
Note that the code above is cut and paste from the Oracle Docs!!! Is this a bug of SQL Developer?!?!?!

Justin,
Yep, I'm talking about SQL Developer (version 2.1.0.63), and when I refer to a PL/SQL window I mean a Code Worksheet as opposed to a SQL worksheet. (In the Code worksheet I've got the "gears" icon where I can compile or compile for debug.) It is the default editor that opens when I open a .pks file that has both my pl/sql spec and body in it.
So when I try to compile one of these PKS files that has the spec and body separated by the slash I get "Encountered the symbol "/". When I remove the slash and try to compile I get the error "Encountered the symbol CREATE".
I understand these errors, and understand that If I pasted this script into a SQL worksheet and used F5 the code will compile with the "/" in it.
Here is my question:
Can I work with a file in the Code worksheet that has both the spec and body in it? If so, how do I get around the two errors mentioned above? We've used TOAD to date here and I'd rather move to SQL Developer. Do I have to break apart my pl/sql code files into separate spec and body files to make this move?
Thanks,
Bruce

How can I will declare the symbol u2018 (Single Quote) in the report

Hi ,
Could you please tell me how can I will declare the symbol u2018 (Single Quote) in the report.
My requirement is that I have concate the data with single quote and after that I have to store the data in to an internal table and I have to download the data in the form text file in the presentation server.
For example :
Let the below data I want to download into the presentation serve in the format of text file by storing in internal table.
Assume all are constants:
1st line : abcu2019add
2nd line : defu2019gef
Thanks in advance.

Hi Jyothi,
Thanks for the quick reply .
I can agree with you are point but My requirement is like this I am explaining clearly.
I have declared the internal table like this.
DATA: BEGIN OF OTAB OCCURS 0,
LINE (9024),
END OF OTAB.
So I have to append the each line item into the internal table.
So I am explaining what the data I have to append
Ist line contains
'UNBUNOC:2020308u2019 where 020308 I will get the date from reguh table
2nd line contains:
'DTM+20020510' where the 20020510 will be reference document number from the table reguh.
So I want to declare a constant 'UNBUNOC:2
2nd the date from reguh table
And another constant u2018
So that I can concate all the three and I can put into string and I will append into internal table and I can download the data into the presentation server.
Please let me know if you need any more clarification regarding my requirement.
Thanks in advance.

The + symbol (to quickly open new tabs) to the right of the tab is gone. How do I get it back?

In the last update of Firefox, the + symbol suddenly disappeared from the tabs section. In the past, this was used to open a new tab instead of having to go to the file menu. I would like to have the + symbol back on the right side of the tabs and cannot find a way to do this in the options or customize sections.

Open the Customize window and set which toolbar items to display.
*"3-bar" Firefox menu button > Customize
*if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the Customize palette then click the <u>Restore Defaults</u> button to restore the default toolbar setup
See also:
*https://support.mozilla.org/kb/customize-firefox-controls-buttons-and-toolbars

PLS-00103: Encountered the symbol "SELECT" when expecting one of the follow

Can any one tell me why I an getting compile error in Trigger with the following code (see below for the error message). Error is indicated in the IF statement Select clause.
Code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(*) From DBConfiguration
Where ConfigurationCode = 'AUDIT' AND
ConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;
-- Audit End
Error:
95/5 PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternativ
97/39 PLS-00103: Encountered the symbol ")" when expecting one of the following:
* & - + ; / at for mod remainder rem <an exponent (**)> and
or group having intersect minus order start union where
connect || multiset

Here is the code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(DBConfigurationValue) From DBConfiguration
Where DBConfigurationCode = 'AUDIT' AND
DBConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;

PLS-00103: Encountered the symbol "" when expecting one of the following:

Hi I am creating trigger using CFQUERY tag of cold fusion on oracle..
<CFQUERY DATASOURCE="CRM">
create or replace trigger AWC_ACCESSROLESID_TRI
before insert on AWC_ACCESSROLES
for each row
begin
select AWC_ACCESSROLESID_SEQ.nextval into :new.AR_ID from dual;
end;
</CFQUERY>
But the created trigger is not compiled, it is giving the following error
"Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the symbol "" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge <a single-quoted SQL string> pipe The symbol "" was ignored."
If I edit that trigger in enterprose manager console by pressing space and compile that, it is working fine with out any error. If i run the above statement in sql *plus, It is working fine with out any error.
Can you please tell me why this is happening if i run it using cfquery tag and also the possible solutions.
Thanks in advance,
Vinod

So it works in Enterprise manager. It works in SQL*Plus. It doesn't work in CFQUERY. Sounds to me like a ColdFusion problem rather than an Oracle problem to be honest. Aren't there any ColdFusion support resources?
Cheers, APC

Will I need to purchase iWork for my iPad if I purchase an iPhone 5s? Everybody knows the iPhone 5s with IOS7 gives iWork for free. Then iWork would be listed as purchased app in my itunes store under my account. My iPad retina is in the same account...

Will I need to purchase iWork for my iPad if I purchase an iPhone 5s? Everybody knows the iPhone 5s with IOS7 gives iWork for free. I assume that if I buy an iPhone 5s (or 5c) then iWork would be listed as a "purchased" app in my itunes store under my account. My iPad retina is in the same account... or are keynote, pages, and numbers completely seperate between ipad and iphone? I know they would be a seperate purchase for my Powerbook. Thanks so much for your help!

Hi,
I was able to load the Productivity Suite / Free !! on both my iPad mini and my iPhone 5s with no problems and at no cost.

Dialling the "+" symbol bug on iOs7

Similar Messages

Maybe you are looking for