Dialog box type showing up as special characters

I am not sure what I did but almost all of my dialog boxes in osx show up as special characters and therefore unreadable. Any help in fixing this would be awesome.
heres a screen shot.

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.

Similar Messages

PSE 10 - Print Dialog box - Preview shows incorrect file

PSE 10 - Print Dialog box - Preview shows incorrect file. Preview shows an open, but minimized file, however, it does not show the active, open file that I want to print. Rather than have to go through the organizer to choose the correct file and delete the incorrect file, how can I make sure that the targeted file I want to print appears in the Print dialog preview window and actually prints?

Thanks, Barbara. I've used PSE for years and never knew this. Such an easy solution. Thanks for quick response!

File Save dialog box not showing correct file name while saving file

hi
Currently, after the Submit button is hit, the File Save dialog box is displayed. If the user saves the file and then opens it then the output appears correct however if the user chooses to open the file without saving on the local machine then the correct viewer is not used to display the file. The name of the file is defaulted as qotSCopPrint.jsp and the default file viewer for jsp files is chosen to view the file. The format of the file is obviously not text (it is either pdf or rtf) so the output shows binary characters.

data : v_repid like sy-repid.
parameters : p_file like rlgrap-filename.
initialization.
v_repid = sy-repid.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = v_repid
            dynpro_number = syst-dynnr
            field_name    = 'P_FILE'
       IMPORTING
            file_name     = p_file.
Message was edited by:
        Chandrasekhar Jagarlamudi

Open and save dialog boxes just show earlier and can't be sorted

Mountail Lion has new open and save dialog boxes that are displayed in groupings by date and other variables.
My Photoshop CS5 shows "Previous 7 days", "Earlier", etc. I can no longer adjust this sorting. Often, just the "Earlier" shows and current files are missing from the box. I used the sorting option but can't sort within the list.
My inDesign files still use the earlier open and save dialog box. Where can I switch between these options?
Photoshop Open:
inDesign Open:

I solved my own question through trial and error.
Just select "None" on the dropdown selector (see screen capture, above) and the Open/Save dialog will revert to the older version.

How can I get print dialog box to show accurately?

My print dialog box shows the image too large. If I go to print it prints correctly. I have tried updating drivers and reinstalling Illustrator. It has been happening since new update to CC.

When viewing the print settings, in the Summary List, it shows the Paper width as 9 inches rather than 8.5.
The Navigator window shows (in my test file) 4 plus signs across the top of an 8.5 by 11 inch page.
The Print Preview in the Print Dialog shows only 3. My printer is set to standard 8.5 by 11 page size.
Everything prints perfectly in CS6 when I bring the file in.

JSP diplays shows junk for special characters.

JSP Gurus,
After upgrading the JRE version of my Tomcat from 1.3.1 to 1.4, all the JSP files have started displaying junk characters for the special characters (like ?, ?). These characters are being pulled from database. If I replace these characters with their ascii values, it works fine but there was no problem with the JRE 1.3.1. I have alot of data with these characters in the datbase. What is the easiest way to display these characters with JRE 1.4.
Thanks,
AG

No One?!?

Smart Web Printing does not show/print german special characters (äöü)

I have installes Smart Web Printing on my computer with WIndows 7. I do use a german localization. Selected text is shown and printed correct, except german special characters ä ö ü. They are even not shown correctly in the menues of the application.

Response to cor-el suggestions:
I tried what you suggested as far as checking the theme (it's "Default 8.0") and deleting the sessionstore files (there was one .js file, one -1.js file and one .bak file). I still have the same slow response problems (especially typing, it has gone dead on me for a short time twice while typing this replay so far, now a third time) and lost of headers and trailers and some data.
I did the suggested actions three times just to make sure that I was doing them correctly. On the first try, the sessionstore.js and sessionstore-1.js was more than twice the size of sessionstore.bak. Since doing what was suggested, the sessionstore.js and sessionstore.bak are, I believe, the same size. I did not write down their size is why I am not certain.
The printing problem appears to only be with one website which is an investment website which I would prefer not to document here. I print from this website each weekday and I have confirmed that the printing problem started when the upgrade to version 8.0 occurred.
I need a solution to this or I am going to either go back to IE (Ugh!) or find another browser. The typing delays are an extreme annoyance since I do lots on the Internet including a lot of emailing. The delays also involve the buttons to select functions within a website.
Is there a way to get back to the version previous to version 8.0?

Flash CS3 - Missing Fonts Alert Dialog box not showing

We seem to have lost the Alert dialog box when Flash CS3 Pro
discovers there are missing fonts in a file. We still get the
warning in the Output box but we get no Alert box to tells us
actually which fonts we need to locate. This is happening
regardless of file so it appears to be Flash issue and not a file
issue.
Anyone come across this before and anyone know how to fix?

You need to make sure that the specific camera model is supported by the version of the ACR plug-in you have installed on your machine.
The current version of ACR (Adobe Camera Raw) is ACR 4.5 and there is also ACR 4.6beta.
What version are you running and what camera generated your raw files?

How do I get the Quit Firefox dialog box to show in Firefox 4?

Hi, I can't seem to find the option to make '''[http://postimage.org/image/1bkjuw1l0/ this] ''' window show again whenever I close Firefox with multiple tabs. It seems to have disappeared from the options in Firefox 4. :(

The number that you show for the contact in the Contacts app has to match what the caller ID is sending to the phone for this to show up correctly on the phone.

How do I type in code for special characters within a font?

Hi, I'm using the font Aloisan New and am trying to access a character which is listed as having the number 146 associated with it. Someone told me I need to press alt-0146 to make the character I need appear, but when I do, it only produces those same numbers and doesn't seem to accept them as a single code. Can someone please guide me key by key as to what I should press and in combination with what? It would be much appreciated. Thanks

Someone told me I need
to press alt-0146 to make the character
That's garbage.
That's an extreme response. Alt-0146 It isn't garbage, that's how it works on most computers (Windows). In most cases that would have been a perfectly legitimate answer. Including on a Mac booted into Windows via Boot Camp or through virtualization. It is also perfectly understandable how they would have given such advice.
It is simpler on the Mac, though, using the Option key and the Character palette.

Print Dialog Box for Addon is not showing in Terminal Server

Dear All,
I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
print dialog box for printer selection through SDK code.
The Same addon works fine on the server with print dialog box being showing through SDK code.
But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
Please suggest as i need to know the reason urgently.
Thanks
Amit

Hello Edward,
Thanks for your reply .
But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
is their any way to check that why the printers are not showing in print dialog box.
Thanks ,
Amit

SSID with special characters showing up in place of the letters

On a Win 7 machine the SSID list of available wireless networks is showing up with special characters in place of the normal letters in the name of the SSID... It has nothing to do with the Linksys Router, it is a problem on this computer. It makes it impossible to connect to a wireless network. I removed the device and reinstalled it hoping that might help. I can't find any viruses, (Known Viruses) Has anyone here seen this before? I am atttaching a photo of this. Any help appreciated.

marke1102 wrote:
On a Win 7 machine the SSID list of available wireless networks is showing up with special characters in place of the normal letters in the name of the SSID... It has nothing to do with the Linksys Router, it is a problem on this computer. It makes it impossible to connect to a wireless network. I removed the device and reinstalled it hoping that might help. I can't find any viruses, (Known Viruses) Has anyone here seen this before? I am atttaching a photo of this. Any help appreciated.
Is this the only computer having a problem? How many wireless devices are connected and working to the router right now?

Blank page shown instead of Open/Save As dialog box-CSV file download in IE

I am migrating an application hosted earlier on Oracle 9iAS (9.0.3.1 BP1) to OracleAS 10g (10.1.3) with Struts 1.2.9. While the below JSP code worked for the earlier s/w stack when accessed using IE 5.5 SP2 or above, a blank page is displayed with the new s/w stack. What I mean by "worked earlier" is this. A "Open/Save As" dialog box would appear. Trying to "Open" would open a new IE window launching MS Excel and displaying correct data. Trying to "Save As" would display correct filename and extension in the dialog box.
<%@page autoFlush="false" contentType="application/x-filler"%>
<%
try
String fileName = "ABC.CSV";
String strData = "A,B,C";
response.setContentLength(strData.length());
response.setHeader("Content-Type","application/octet-stream");
response.setHeader("Content-Disposition","inline;filename="+fileName);
ServletOutputStream ouputStream = response.getOutputStream();
ouputStream.write(strData.getBytes(), 0, strData.getBytes().length);
ouputStream.flush();
ouputStream.close();
catch(Exception e)
%>
I tried some changes listed below:
1. Deliberately introduced compilation errors in the JSP code.
2. Changed contentType="application/x-filler" to various MIME types like application/x-download, application/vnd.ms-excel, removing it altogether.
3. Commented out response.setHeader("Content-Type","application/octet-stream") and also tried other MIME types related to CSV/Excel.
4. Changed Content-Disposition from inline to attachment.
Each of the above resulted in an unacceptable behaviour compared with the earlier state:
1. Blank page shown as if nothing was happening even in case of deliberate incorrect JSP syntax.
2. Dialog box did show up with some combinations. But on trying to "Open" or "Save As", the dialog box shows up a second time. Then while trying to "Open", the contents get opened either inline or in MS Excel but with some additional garbage data like source file name.jsp etc. While trying to "Save As" the file name and extension take on the pattern <URL_Pattern>.htm where URL_Pattern would be "DOWNLOAD_ACTION.do".
Some other information:
1. This code works when accessed from desktop local container (Win 2000) but not when deployed on Unix env (HP-UX B.11.11.0109).
2. Latest patchsets are installed for IE.
3. The existing application is designed to work for ONLY IE 5.5 SP2 or above, so I haven't tried with other browsers. I have tried both IE 5.5 SP2 and 6.0 SP1.
Any help in this regard will be highly appreciated.
Thanks a lot for your valuable time..

I have made it to work with the below changes:
1. Changed the URL pattern for <filter-mapping> for *.jsp to /*.jsp
2. Added <dispatcher>REQUEST</dispatcher> and <dispatcher>FORWARD</dispatcher>
3. Everything else (code-wise) is as before.
Because of these changes, the filter, wherein some headers are being added to the response, is being invoked appropriately now.
Thanks for you time and suggestion though...

Enable "scrolling preview" behind the Crop Pages dialog box in Acrobat 9 ?

Hi everyone,
I want to be able to preview the crop marks (when you click on "Document" and choose "Crop Pages" or Shift+Ctrl+T) before actually cropping all the pages of my documents. When the crop tool dialog box is showing, you can see behind it the crop marks that look like guides. In Acrobat 5, you could scroll the pages even with the crop tool box showing in front of your pages. This way, you could see the crop marks or "guides" on all the pages. But, in version 9, when the crop box is showing, you can only see the crop marks on the page(s) you're working on. You can't scroll behind the box to see what the others pages look like with the crop marks. I've uploaded print screens to make myself a bit more clear (Acrobat 5 vs Acrobat 9) :
http://localhostr.com/files/0484a8/acro5vs9_crop.png
If someone knows a way to get the crop preview scrolling back, maybe with a plugin or Javascript, please let me know !
Thank you all for your help.
Paul B.

Can somebody please help me? Nothing I do seems to open up the "crop dialog box".
I start with Edit > Edit Text & Images. Then, I click the crop symbol, and set the ranges of my desired crop. Then I want to apply this crop, but nothing works.
I've tried:
     - Double Clicking Inside the selected crop-box
     - Double Clicking Outside the selected crop-box
     - Triple Clicking
     - Quadruple Clicking
     - CTRL-SHIFT-T
     - Hitting Enter
     - Right clicking
     - Searching endlessly for some sort of button pertaining to "apply crop", to no avail.
     - Changing to different PDF type (scanned, instead of text-to-pdf) and trying again
     - Yelling
     - Punching
     - Crying
None of the afforementioned seems to work.
Help please?

Displaying selection screen as pop-up from dialog box

Hi,
      I have a screen which is of dialog-box type. This dialog screen shows an ALV and has a button in the ALV toolbar. On pressing this button, a pop-up screen is to be displayed. This pop-up screen is designed as a selection-screen. Is it possible to display this selection screen as a pop-up from a dialog box screen?
Regards,
Suhas

Hi Suhas,
Its possible to display selection screen as pop-up from dialog box.....Check the code below...copy paste and execute...
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE text-001.
PARAMETER p.
SELECTION-SCREEN END   OF SCREEN 123.
CALL SELECTION-SCREEN 123 STARTING AT 20 5
                            ENDING AT 80 15.
The below code might help u to add a button in alvgrid's toolbar......
*       CLASS lcl_event_handler DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
    DATA: wa_toolbar   TYPE stb_button,
          calc         TYPE REF   TO cl_gui_frontend_services.
    METHODS : toolbar_handle FOR EVENT toolbar      OF cl_gui_alv_grid
                                    IMPORTING e_object
                                              e_interactive,
              ucomm_handle   FOR EVENT user_command OF cl_gui_alv_grid
                                    IMPORTING e_ucomm.
ENDCLASS.                    "lcl_event_handler DEFINITION
*       CLASS lcl_event_handler IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD toolbar_handle.
    MOVE   3 TO wa_toolbar-butn_type.
    APPEND wa_toolbar   TO e_object->mt_toolbar.
    MOVE : 0            TO wa_toolbar-butn_type,
           'CALC'       TO wa_toolbar-function,
           '@0M@'       TO wa_toolbar-icon,
           'Calculator' TO wa_toolbar-quickinfo.
    APPEND wa_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "toolbar_handle
METHOD ucomm_handle.
    IF e_ucomm = 'CALC'.   " When button added in toolbar is clicked
      IF calc IS INITIAL.
        CREATE OBJECT calc.
      ENDIF.
      CALL METHOD cl_gui_frontend_services=>execute
   EXPORTING
     application            = 'CALC'.
    ENDIF.
ENDMETHOD. "ucomm_handle
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
DATA : container    TYPE REF   TO cl_gui_custom_container,
       grid         TYPE REF   TO cl_gui_alv_grid,
       event        TYPE REF   TO lcl_event_handler,
       it_display   TYPE TABLE OF mara,
       wa_display   TYPE mara.
START-OF-SELECTION.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'BASIC'.
PERFORM build_it_display.
PERFORM create_objects.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      SET SCREEN 0.
      LEAVE SCREEN.
    WHEN 'EXIT'.
      SET SCREEN 0.
      LEAVE SCREEN.
    WHEN 'CANC'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form build_it_display
*       text
* --> p1        text
* <-- p2        text
FORM build_it_display .
SELECT * FROM mara UP TO 15 ROWS INTO TABLE it_display.
ENDFORM.                    " build_it_display
*&      Form create_objects
*       text
* --> p1        text
* <-- p2        text
FORM create_objects .
IF container IS INITIAL.
    CREATE OBJECT container
    EXPORTING
      container_name     = 'CUSTOM'.
    CREATE OBJECT event.
    CREATE OBJECT grid
      EXPORTING
        i_parent         = container.
    SET HANDLER event->toolbar_handle FOR grid.
    SET HANDLER event->ucomm_handle   FOR grid.
    CALL METHOD grid->set_table_for_first_display
      EXPORTING
        i_structure_name = 'MARA'
      CHANGING
        it_outtab        = it_display.
ENDIF.
ENDFORM.                    " create_objects
Cheers,
Jose.

Dialog box type showing up as special characters

Similar Messages

Maybe you are looking for