Dialog Instances in remote locations

Hello,
we have a couple of remote locations where the response time of the portal is rather high.
Has anyone ever tried having a portal dialog instance in a remote location with rather slow WAN connection and could let me know if that improved things a bit?
Regards,
Andi

Ah - now you mention webdynpros, you could probably do that yes as they just make RFC calls. I would probably set up a separate portal (or webdynpro) system at the remote location. If you did a remote portal, you could have webdynpro on it and federate it into the main portal for any other content.
Paul

Similar Messages

Location of Dialog Instance

Hi all,
We have several locations in the world and we want to install servers with dialog instance's for every location.
What is the best place for a dialog instance?
At the location itself or, like somebody told me, near the DBserver/Central Instance.
Logically I would say, at the remote location itself...but I want some opinions on that.
Regards,
Bob Gulien

Hi Bob,
No, the recommendation is to install Dialog instance near DBServer/central Instance preferably connected by a high-speed (G-bit) LAN.
The reason is that the data exchnage between SAP Servers are approx 10-times more than server to end-user. So, having Dialog Instance at the remote location will put enormous pressure on network and performance will not be adequate.
Hope it solves your query ...
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful..thx,

Remotely stop\start your Windows Dialog Instance from System i CI

Hi All,
Is there a way to remotely stop and start your Dialog Instance running on Windows from your system 'i' Central Instance?
Thanks,
Diana

Hello Diane,
We thought about the situation and came to the conclusion, that with the 720 DCK the restriction of only starting/stopping IBM I remote instances with one STARTSAP/STOPSAP call can be dropped.
The new note 1644051 will describe what to do.
Here is a short summary:
You have to apply the 720 DCK to all instances of your SAP system following note 1636252. Also follow this note to obtain info when 720 DCK will be available for all SAP Systems newer than SAP NetWeaver 7.0 ("7.00") without restrictions.
You have to apply at least the 720 dw patch #67 to all instances (all platforms).
You have to apply at least the 720 ILE Patch #111 (I think this will be the number, but for the official number wait for note 1644051) to all IBM I hosted instances.
Of course the first stack kernel available after complete 720 DCK availability will contain all patches needed.
Please remove any additional stuff from the START profile which you added to start/stop remote windows Instances along with your central Instance.
Then you can call
STARTSAP SID(<sapsid>) INSTANCE(ALL) INSTHOST(ALL)
STOPSAP SID(<sapsid>) INSTANCE(ALL) INSTHOST(ALL)
to start and stop really all instances out of the box.
Kind Regards
Joachim

How to delete Dialog instance on NW04

Hi guys
I have an installation NW04 on Cluster MSCS:
Central Instance on node A
SCS instance on Cluster Disk
Dialog instance on node B
We have performed upgrade to NW04s, and now in postprocessin we should deinstall Dialog Instance and install it again with software NW04s.
Here documentation guide:
****************************************+
After the upgrade of the central instance, you need to upgrade the dialog instance to the new release.
Due to the fact that some special settings and binaries on a dialog instance cannot be upgraded
remotely, you can only upgrade a dialog instance by uninstalling the old instance and then installing
a new dialog instance with the tool SAPinst.
Procedure
1. Uninstall the old dialog instances as described in the document Installation Guide ‒ SAP Web Application
Server 6.40 Java on <Operating System>: <Database>, Part II Installation and Post-Installation.
2. Install the new dialog instances as described in the document Installation Guide ‒ <SAP NetWeaver /
SAP application> <Technology> on <Operating System>: <Database>.
Point 1, is :
*************+
1. Log on as a user with domain administration rights.
2. Choose Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs.
3. The Add/Remove Programs dialog box appears.
4. Find the SAP entries.
. Note
Each SAP instance that is installed on the computer is listed with an entry like SAP Application Server
for System <SAPSID> instance.
5. Choose Remove.
The SAP Uninstall Wizard starts.
6. In the Welcome window, choose Next.
The dialog box Uninstalling SAP System appears for you to select an uninstall method
Depending on your selection, note the following when you use the check box to delete an SAP instance:
-- If your check box is marked gray, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example:
SAP<SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
-- If your check box is marked black, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example, SAP <SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
Local and domain user accounts
If you have different SAP instances that use the same <SAPSID>, you can delete the instance
directory only.
The wizard informs you when the SAP system or selected instances have been deleted successfully
But in my node B there is no SAP entry on Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs, however Dialog Instance exists, and windows service exists...and so on...
So how can we deinstall this dialog instance???
Thanks and regards
Javier

Hi
In node A there is JC30 (Java central instance)
In node B there is J32 (Java Dialog instance)
SCS31 (Services Central Instance) is now in node A, but can be switched.
Database Instance is OUTSIDE, is located on a Unix Server. (is not affected in this case)
Looking node B, there is no entry on Adding/Removing Programs regarding to SAP instance.
Of course, I can see windows services on node B, one for J32, other for SAPoscol, and one more for SCS31.
Any idea?
Thanks
Javier

Saving to remote location

Is it possible to back up my hard drive from a remote location. For instance, we have 5 computers connected together. Can i back up computer A's files from Computer B's TM and its external hard drive?
Thanks for your help.

joshua12mac, Welcome to the discussion area!
I'm not sure exactly what you are asking. Let me explain my configuration and maybe that will help you.
I have a USB external drive connected to my iMac. The iMac is connected via Ethernet to my wireless router. My iBook is wirelessly connected to the same router. Time Machine running on the iBook is configured to use the iMac's external drive as the destination for the backup.

Automatic shutdown of SAP Instance after installation of Dialog Instance

Hi all,
We've upgraded our system from SAP4.6C to ECC6.0 running on Win2003 64 bits Oracle 10g.
After upgrade, we installed Dialog instance (this dialog instance is running outside MS cluster) and it is running on Microsoft cluster. When we try to start up SAP dialog instance, the system is started but it automatically shuts down again.
Below are the trace for DEV_DISP
=============================
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid P02
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 3216
Wed Nov 22 12:32:40 2006
kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 3216) [dpxxdisp.c 1237]
 shared lib "dw_xml.dll" version 75 successfully loaded
 shared lib "dw_xtc.dll" version 75 successfully loaded
 shared lib "dw_stl.dll" version 75 successfully loaded
 shared lib "dw_gui.dll" version 75 successfully loaded
 shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Nov 22 12:32:51 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0091.qqq.nxst) took 11 seconds
Wed Nov 22 12:33:08 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >AP2_P02_03 <
DpShMCreate: sizeof(wp_adm) 5376 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007DA0050, size: 5314128)
DpShMCreate: allocated sys_adm at 0000000007DA0050
DpShMCreate: allocated wp_adm at 0000000007DA1AB0
DpShMCreate: allocated tm_adm_list at 0000000007DA2FB0
DpShMCreate: allocated tm_adm at 0000000007DA3010
DpShMCreate: allocated wp_ca_adm at 00000000082157B0
DpShMCreate: allocated appc_ca_adm at 0000000008219E00
DpShMCreate: allocated comm_adm at 000000000821B570
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000082A21F0
DpShMCreate: allocated gw_adm at 00000000082A2270
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000082A22A0
DpShMCreate: allocated wall_adm at 00000000082A22B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Wed Nov 22 12:33:09 2006
***LOG Q0K=> DpMsAttach, mscon ( SAPGRPP02) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >AP2_P02_03 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Wed Nov 22 12:33:49 2006
ERROR => W0 (pid 1100) died [dpxxdisp.c 14241]
ERROR => W1 (pid 1112) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1856) died [dpxxdisp.c 14241]
ERROR => W3 (pid 576) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x99 --> 0x98
ERROR => W4 (pid 1368) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W5 (pid 1108) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:33:59 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Nov 22 04:33:59 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1100 Ended no 1 0 0
1 DIA 1112 Ended no 1 0 0
2 DIA 1856 Ended no 1 0 0
3 DIA 576 Ended no 1 0 0
4 BTC 1368 Ended no 1 0 0
5 SPO 1108 Ended no 1 0 0
Dispatcher Queue Statistics Wed Nov 22 04:33:59 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Nov 22 04:33:59 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Nov 22 04:33:59 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:04 2006
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >AP2_P02_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1096) (SOFT_KILL)
Stop icman
killing process (748) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1096 HANDLE:536)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:05 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1096 HANDLE:536)
wait for end of icman
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:06 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:07 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:08 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:09 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:10 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:11 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:12 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:13 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:14 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:15 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:16 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:748 HANDLE:544)
DpStartStopMsg: send stop message (myname is >AP2_P02_03 <)
NiIMyHostName: hostname = 'AP2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Nov 22 12:34:17 2006
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 548 (pos=2)
SiSelNRemove: removed sock 548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/6
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3216) [dpxxdisp.c 10259]
Good Bye .....
Below is the trace for DEV_W0
==========================
M patchno 75
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 1100
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1100) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 5376 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5314128)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA2FB0
M DpShMCreate: allocated tm_adm at 000000000DDA3010
M DpShMCreate: allocated wp_ca_adm at 000000000E2157B0
M DpShMCreate: allocated appc_ca_adm at 000000000E219E00
M DpShMCreate: allocated comm_adm at 000000000E21B570
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A21F0
M DpShMCreate: allocated gw_adm at 000000000E2A2270
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A22A0
M DpShMCreate: allocated wall_adm at 000000000E2A22B0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host AP2
M
M Wed Nov 22 12:33:10 2006
M calling db_connect ...
C Prepending E:\usr\sap\P02\D03\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c 432]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App : disp+work.EXE (pid=1100)
When : 11/22/2006 12:33:14.515
Threads : 2
Computer Name : AP2
User Name : SAPServiceP02
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 440
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000678f720 00000000078488ca 0000000000000003 kernel32!PulseEvent
000000000678f7f0 0000000007847fe6 0000000007926000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
000000000678f860 00000000078136cd 000000000678f8b0 dboraslib!_tailMerge_OCI_dll
000000000678f8c0 000000000782f3d8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2766)]
000000000678fa90 0000000001182107 000000000678fd80 dboraslib!DbSlConnect [dbsloci.c (1835)]
000000000678fce0 000000000118251e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
000000000678fd50 00000000011856de 00000000ffffffff disp+work!supply_con [dbcon.c (3830)]
000000000678fd90 000000000117826c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
000000000678fdf0 00000000004ca16a 000000000755476c disp+work!db_connect [dblink.c (422)]
000000000678fe80 00000000004cf609 0000000006d6bdfd disp+work!ThInit [thxxhead.c (1404)]
000000000678feb0 000000000042c9e6 ffffffff00000002 disp+work!ThStart [thxxhead.c (1114)]
000000000678fee0 0000000000401097 ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1119)]
000000000678ff10 00000000018919c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (82)]
000000000678ff70 0000000078d5965c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
000000000678ffa0 0000000000000000 0000000001891850 kernel32!BaseProcessStart
State Dump for Thread Id c70
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000bd9fe40 0000000078d5f611 0000000006d31460 ntdll!NtFsControlFile
000000000bd9feb0 000000000178a99f 0000000000000000 kernel32!ConnectNamedPipe
000000000bd9ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (595)]
000000000bd9ff70 0000000078d6b66a 0000000078d6b630 msvcrt!endthreadex
000000000bd9ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Wed Nov 22 12:33:15 2006
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server AP2_P02_03 on host AP2 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Wed Nov 22 12:33:15 2006
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1100) [dpnttool.c 327]
M return from clean-up function ...
Does anybody has a solution for this problem?
Thank you.

Hi all again,
I had the same problem and found a solution for it.
I made two steps to start the dialog instance successful. First I modified the NLS_LANG setting in the registry and enviroment (only if necessary). Second, I fetched the last Oracle Instant Client OCL10264.sar from SAP Net and extract the file to E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64 (This directory was created through the Installer. The Kernel lies under E:\usr\sap\PDV\D20\exe)
Now I changed the variable DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE) to
DIR_CLIENT_ORAHOME = E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64 in the Instance Profile of the new Dialog Instance. So the Kernel knows that he has to use the Oracle Instance Client and the profilevariable says where he found it.
After these modifications the Dialog Instance starts with success.
With kind regards
Thomas Espenhain

Dialog instance installation procedure.

Hi
We are planning to install a new dialog instance to our production system in a seperate host(A new server).
The normal way of doing is to initiate SAPINST tool on the new server and install just the dialog instance and club this with the main central instance.
But the client wants to do in a different way, by creating directories on the central host itself for the new app server....Like if X50 is central instance and X51 & X52 are application server located in the CI itself. And now we create X53 and all the subdirectories and mount the whole directory to the new host.
Here are my questions...
1. Is this advisable way of doing?
2. Where does a Java instance directory is located? Dont we have J2ee directory on each instance wether its CI or DI?
3. Can anyone let me know the directory structure of a dialog instance?
Thanks
Subbu

Hello,
You would need to rn SAPINST on app servers too.
However what you can do is create a share /sapmnt/SID/
/sapmnt/SID should have the following sub dirs.
/sapmnt/SID/exe
/sapmnt/SID/global
/sapmnt/SID/profile
by sharing these directory, you can keep your Kernel centrallly located and de-risk the Kernel upgrades.
Also profiles are maintained centrally.
And this config is supported by SAP.
Regards,
Siddhesh

OAS 4.0.8.1 Administration from a remote location

We have installed OAS 4.0.8.1 on NT and it is functioning.
I am able to access this from a remote place and get a static web page. I don't have a registered domain name
Can I go into Node manager (OAS Manager) from a remote location (through Internet) and manager the server.
null

I increased the severity level for logging to 15 for the Cartridge configuration
in the OASManager.
It says init method did not return. For my init method I have that following :
public void init(ServletConfig config) throws ServletException
super.init(config) ;
All the above was generated by the Servlet Wizard.
Below if the level 15 trace information :
OWS-10911: Throwing exception for reason: wrkwExecute: Exec callback returned WRB_ERROR `
OWS-10833: Cartridge HelloServlet/HelloCart init runtime callback did not return WRB_DONE `
OWS-10911: Throwing exception for reason: wrkwfInit:Error in wrkwfInit `
OWS-10911: Throwing exception for reason: wrkwfStartOrig:Error at creation time `
OWS-10911: Throwing exception for reason: wrkwfStart: Cartridge Instance factory creation failed. `
OWS-10803: Cartridge instance factory for HelloServlet/HelloCart not intialized `
OWS-10911: Throwing exception for reason: No Carrtridge Instance Factories Initialized Properly `
OWS-10821: Application HelloServlet failed to deregister with the name server `
OWS-10850: Cartridge Server HelloServlet received exception IDL:oracle/OAS/Cartridge/InitFailed:1.0 while deregistering
Can anyone advise why and what needs to be
done to fix this ??
Please help.
Thanks,

Dialog instance error

Dear all,
System details: iseries, v5r3m5, sap r3ex4700 sr1, kernel(u) 640.
Requirement: I installed dialog instance on windows 2003 server. Work process does not start. Log is attaced here.
I have updted the patch also.
Can anyone advise me.
Thanks
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Sep 26 09:33:32 2006
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\KRP\D01\exe\dbdb4slib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\KRP\D01\exe\dbdb4slib.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\KRP\D01\exe\dbdb4slib.dll'
[dbcon.c 4667]
M sysno 01
M sid KRP
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 139
M intno 20020600
M make: multithreaded, Unicode
M pid 2924
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2924) [dpxxdisp.c 1158]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 2632 (1316)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07950040, size: 3373784)
M DpShMCreate: allocated sys_adm at 07950040
M DpShMCreate: allocated wp_adm at 07951B88
M DpShMCreate: allocated tm_adm_list at 079525D0
M DpShMCreate: allocated tm_adm at 079525F8
M DpShMCreate: allocated wp_ca_adm at 07C27450
M DpShMCreate: allocated appc_ca_adm at 07C2D210
M DpShMCreate: allocated comm_adm_list at 07C2F150
M DpShMCreate: allocated comm_adm at 07C2F168
M DpShMCreate: allocated vmc_adm_list at 07C75E38
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07C75E60
M DpShMCreate: allocated wall_adm at 07C75E68
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Sep 26 09:33:33 2006
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\KRP\D01\exe\dbdb4slib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\KRP\D01\exe\dbdb4slib.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\KRP\D01\exe\dbdb4slib.dll'
[dbcon.c 4667]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1284]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server portal_KRP_01 on host portal (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Sep 26 09:33:33 2006
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9740
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2924) [dpnttool.c 357]

Hi Kamal,
if you are on 64 Bit, I guess you are using the only supported AMD64 bit one ...
Go to the following web-site:
http://www.ibm.com/servers/eserver/iseries/access/xda/download.htm
There you find the following:
For V5R4 iSeries Access for Windows:
qxdaedrs_v5r4.exe (32 bit)
qxdaedrs64_Itanium_v5r4.exe (64 bit)
qxdaedrs64_AMD_v5r4.exe (64 bit) <<<
For V5R3 iSeries Access for Windows:
qxdaedrs_v5r3.exe (32 bit)
qxdaedrs64_Itanium_v5r3.exe (64 bit)
qxdaedrs64_AMD_v5r3.exe (64 bit) <<<
You should download the AMD 64 Files for your OS/400, then it'll work, as as I know of the CA Service Pack only contains the 32 Bit code, which is not sufficient for you.
Itanium is not supported, so you will not use that I hope ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Install new Dialog Instance on 64-bit Server with 32-bit database

I need to set up a new Application Server for our current ECC 5.0 32-bit Oracle 9.2.0.7 Non Unicode Database. The new server is x64-bit and will have Windows 2003 64-bit OS. I am reading SAP notes 785888 and 814834 and need help understanding how exactly to do this. The database server is 32-bit Windows 2003 and so is all the other application servers. Do I use the Oracle 9.2.0 client for 32-bit Oracle and do I use the SAP ECC X64 Install Master in setting up the dialog instance or do I use the 32-bit Install master? Has anyone done this type of setup before? Thanks.

Hi,
all basic information is provide in note 785888.
you want to install dialog install on 64bit windows for 32 bit central instance for that you should consider following.
-> file system is accessible from both host vice a versa for that you can create one use sapinst on 64 bit host with administrator authorization. and create same user on central instance with administrator authorization and same password.
-> perform dialog instance installation using this user ( i.e sapinst)
-> if you want to use dialog instance on 64 bit host with 64 bit kernel, install oracle client 10.2 for 64 bit on 64 bit host of windows. for media information check note 949116.
->use non unicode kernel because central instance use non unicode kernel.
-> most important 64 bit dialog instance required 64 bit kernel, SAPinst installation screen ABAP System > Instance Directories, where you are asked for the "Location of SAP System Executable", you choose "Yes, locate executables on central instance host", before choosing "Next". The executables for the dialog instance are installed to
<sapglobalhost>\sapmnt\<sapsid>\SYS\exe\<nuc\uc>\NT<AMD64|IA64|I386>*
so when you want to apply kernel patch you have to uncar the kernel package to this location.
-> maintain the kernel patch level same on both host.
regards,
kaushal

SM51 - no connect to dialog instance

Hi,
we have an Netweaver 7.0 on AIX ( DB2 on z/os ) installation with several dialog instances.
Now we installed an additional dialog instance on Linux ( SLES10 ) for this sap system.
1)
But in TAC SM51 we can see the newly installed sap system on Linux, but we cannot
"jump" to this dialoginstance from SM51.
2) We also have another problem with the shared /sapmnt/SID/global where the db2passwd - file
is located.
We get the Linux instance only running to the AIX CI, when we have an own "db2passwd" for linux und one
for AIX.
Any ideas for this behaviour ?
Kind regards
Andreas Laaser

HI,
For your first problem make sure host name and services are maintained properly in both the servers.
Regards,

About dialog instance

Hi Friends
If more than one dialog instance can be installed in a computer?
I have installed a sap system(abap stack), central instance and dialog instance are in the same server. the dialog instance has started up, but I can't see the dialog instance through SM51. If some configuration is missing?
tons of thanks.
smh

trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid S01
M systemid 399 (New architecture with Linux)
M relno 6400
M patchlevel 0
M patchno 56
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 13770
M
M
M Sat May 9 00:32:26 2009
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 13770) [thxxhead.c 1131]
M calling db_connect ...
C
C DBADASLIB : version 640.00, patch 0.055 (Make PL 0.56)
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.055) Min. release check of non default connection removed (note 807218)
C (0.055) Statistic data in ST05 corrected (note 807216)
C (0.039) Invalid data of STAD corrected (note 779116)
C (0.039) Do not abort session after -810 (note 780238)
C (0.035) Sapdb_free invalid address (note 766340)
C (0.035) EXPLAIN with non character inputvariables (note 770755)
C (0.032) Sapdb_free invalid address (note 766340)
C (0.032) Abap info for performance montior (note 216208)
C (0.032) SAPDB min. release is 7.4.3 (note 326487)
C (0.031) Set isolation level calls optimized (note 762712)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.13770.pct
C Precompiler Runtime : C-PreComp 7.5.0 Build 026-123-094-430
C Precompiler runtime is SAP DB 7.5.0.026
C Try to connect (DEFAULT) on connection 0 ...
C
C Sat May 9 00:32:27 2009
C Attach to SAP DB : Kernel 7.5.0 Build 026-123-094-430
C Database release is SAP DB 7.5.0.026
C INFO : Database 'S01' instance is running on 'saps01'
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPS01'
C 00: DB_000 saps01-S01, conn=1, since=20090509003227
C ABAP= <unknown> (0)
C Now I'm connected to SAP DB
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090509 003226 saps01
C INFO : SAP RELEASE (DB) = 640
M db_connect o.k.
I
I Sat May 9 00:32:31 2009
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x2ba866adb000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x2ba9763af000, size: 134217728)
M SHM_PAGING_AREA (addr: 0x2ba97e3af000, size: 67108864)
M SHM_ROLL_ADM (addr: 0x2ba866f0f000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x2ba9823af000, size: 656416)
M ThCreateNoBuffer allocated 556152 bytes for 1000 entries at 0x2ba982452000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x2ba988f20000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation map
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 0x2ba9896b9100, size: 30000000, end: 0x2ba98b355480)
B dbtbxbuf: Buffer TABLP (addr: 0x2ba98b356100, size: 10240000, end: 0x2ba98bd1a100)
B dbexpbuf: Buffer EIBUF (addr: 0x2ba98bd1a108, size: 4194304, end: 0x2ba98c11a108)
B dbexpbuf: Buffer ESM (addr: 0x2ba98c11b108, size: 4194304, end: 0x2ba98c51b108)
B dbexpbuf: Buffer CUA (addr: 0x2ba98545e108, size: 3072000, end: 0x2ba98574c108)
B dbexpbuf: Buffer OTR (addr: 0x2ba98c51c108, size: 4194304, end: 0x2ba98c91c108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S Sat May 9 00:32:33 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x14dbd1f0
S
S Sat May 9 00:32:34 2009
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S intervals: query=50, rescan=1800, global=300 info=120
S processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 0x2ba98574e070
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 0x2ba98574e388
S using messages for server info
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:640.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->0, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2168 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Sat May 9 00:32:35 2009
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 36 MB, reducing # of fragments
A System page size: 4kb, admin_size: 5540kb.
A Attached to PXA (address 0x2ba98cb1e000, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Sat May 9 00:32:36 2009
A ABAP ShmAdm attached (addr=0x2ba9695b7000 leng=20955136 end=0x2ba96a9b3000)
A >> Shm MMADM area (addr=0x2ba969aaed80 leng=242176 end=0x2ba969ae9f80)
A >> Shm MMDAT area (addr=0x2ba969aeb000 leng=15499264 end=0x2ba96a9b3000)
A RFC Destination> destination saps01_S01_00 host saps01 system S01 systnr 0 (saps01_S01_00)
A RFC Options> H=saps01,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects allocated 8460 bytes at 0x2ba995de8000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/S01/DVEBMGS00/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/S01/SYS/exe/run/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.56.20020600]
W ITS Plugin: Int.version, [31]
W ITS Plugin: Feature set: [4]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >saps01_S01_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 09.05.2009 00:32:36 1241800356 / 13770
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 09.05.2009 00:32:36 1241800356 / 2
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 09.05.2009 00:32:36 1241800356 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <saps01_S01_00 >
L End of BtcSysStartRaise
M MBUF info for hooks: MS component UP
M ThActivateServer: state = STARTING
S
S Sat May 9 00:32:38 2009
S server @>SSRV:saps01_S01_00@< appears or changes (state 1)
S
S Sat May 9 00:32:39 2009
S server @>SSRV:saps01_S01_00@< appears or changes (state 1)
I MPI<6>3#17 Peak buffer usage: 5 (@ 64 KB)
S
S Sat May 9 00:32:58 2009
S server @>SSRV:saps01_S01_10@< appears or changes (state 5)
S server @>SSRV:saps01_S01_10@< appears or changes (state 5)
S
S Sat May 9 00:33:18 2009
S server @>SSRV:saps01_S01_10@< appears or changes (state 3)
S server @>SSRV:saps01_S01_10@< vanished
N
N Sat May 9 00:34:29 2009
N login/password_change_for_SSO : 1 -> 1
B
B Sat May 9 00:34:35 2009
B dbmyclu : info : my major identification is 171442396, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is D65E044AA45ECA35E10000000A3800DC.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
S
S Sat May 9 00:40:53 2009
S found spool memory service RSPO-ACTIONS at 0x2ba9857567d0
B
B Sat May 9 12:02:53 2009
B table logging switched off for all clients
M
M Sat May 9 12:02:55 2009
M ***LOG R49=> ThCPICSyncWait, CPIC-Error (026665) [thxxcpic.c 3544]
M ***LOG R64=> ThCPICSyncWait, CPIC-Error ( CMINIT(SAP)) [thxxcpic.c 3557]
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host saps01 / sapgw00
M * ERROR service 'sapgw30' unknown
M *
M * TIME Sat May 9 12:02:55 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * MODULE niuxi.c
M * LINE 521
M * DETAIL NiPGetServByName: service 'sapgw30' not found
M * SYSTEM CALL getservbyname
M * COUNTER 1357
M *
M *****************************************************************************
M
A RFC 1446 CONVID
A * CMRC=26 DATA=0 STATUS=0 SAPRC=665 ThSAPECMINIT
A RFC> ABAP Programm: RSLDAGDS (Transaction: RZ70)
A RFC> User: JXIONG (Client: 000)
A RFC> Destination: SLD_UC (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPECMINIT'
Service name is not known
[abrfcio.c 7594]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Service name is not known
DEST =SLD_UC
HOST =%%RFCSERVER%%
PROG =SLD_UC
GWHOST =10.56.0.169
GWSERV =sapgw30
[abrfcio.c 7594]
A TH VERBOSE LEVEL FULL
M
M Sat May 9 14:07:53 2009
M WARNING ==> PfFileIndUpd: new starttime < starttime

Cannot start Dialog Instance

Hi.
I am not able to start Dialog instance. We are running on Unix. When I execute the command startsap R3 i get the error
Database db must be started on remotre server. Log on to remote server and start database
The central instance is already running.

Hello Amit,
Here is the output from command env
LDIL0219EAP01:de2adm 54> env++
+USER=de2adm+
+LOGNAME=de2adm+
+HOME=/home/de2adm+
+PATH=/usr/lib64/jvm/java/bin:.:/home/de2adm:/usr/sap/DE2/SYS/exe/run:/usr/bin:/bin:/usr/sbin:/sbin:/home/de2adm/bin:/usr/games:/opt/gnome/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin+
+MAIL=/var/mail/de2adm+
+SHELL=/bin/csh+
+SSH_CLIENT=10.208.98.86 3472 22+
+SSH_CONNECTION=10.208.98.86 3472 161.244.247.187 22+
+SSH_TTY=/dev/pts/0+
+TERM=xterm+
+HOSTTYPE=x86_64+
+VENDOR=suse+
+OSTYPE=linux+
+MACHTYPE=x86_64-suse-linux+
+SHLVL=1+
+PWD=/+
+GROUP=sapsys+
+HOST=LDIL0219EAP01+
+CSHEDIT=emacs+
+CPU=x86_64+
+HOSTNAME=LDIL0219EAP01.cardinalhealth.net+
+INPUTRC=/etc/inputrc+
+TEXINPUTS=:/home/de2adm/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX+
+LESS=-M -I+
+LESSOPEN=lessopen.sh %s+
+LESSCLOSE=lessclose.sh %s %s+
+LESS_ADVANCED_PREPROCESSOR=no+
+LESSKEY=/etc/lesskey.bin+
+PAGER=less+
+MORE=-sl+
+MINICOM=-c on+
+MANPATH=/usr/share/man:/opt/gnome/share/man:/usr/X11R6/man:/usr/local/man:/opt/quest/man+
+INFODIR=/usr/local/info:/usr/share/info:/usr/info+
+INFOPATH=/usr/local/info:/usr/share/info:/usr/info:/opt/gnome/share/info+
+XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB+
+XNLSPATH=/usr/X11R6/lib/X11/nls+
+NNTPSERVER=news+
+COLORTERM=1+
+JAVA_BINDIR=/usr/lib64/jvm/java/bin+
+JAVA_ROOT=/usr/lib64/jvm/java+
+JAVA_HOME=/usr/lib64/jvm/java+
+JRE_HOME=/usr/lib64/jvm/java/jre+
+JDK_HOME=/usr/lib64/jvm/java+
+SDK_HOME=/usr/lib64/jvm/java+
+CVS_RSH=ssh+
+XCURSOR_THEME=crystalwhite+
+QT_SYSTEM_DIR=/usr/share/desktop-data+
+ACLOCAL_FLAGS=-I /opt/gnome/share/aclocal+
+PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig:/opt/kde3/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/share/pkgconfig+
+GNOME2_PATH=/usr/local:/opt/gnome:/usr+
+XDG_DATA_DIRS=/usr/local/share/:/usr/share/:/etc/opt/kde3/share/:/opt/kde3/share/:/opt/gnome/share/+
+XDG_CONFIG_DIRS=/usr/local/etc/xdg/:/etc/xdg/:/etc/opt/gnome/xdg/+
+GROFF_NO_SGR=yes+
+GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gnome/lib/gtk-2.0:/usr/lib/gtk-2.0+
+GTK_PATH64=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0+
+LANG=en_US+
+FROM_HEADER=+
+PYTHONSTARTUP=/etc/pythonstart+
+G_BROKEN_FILENAMES=1+
+G_FILENAME_ENCODING=@locale,UTF-8,ISO-8859-1,CP1252+
+ENV=/etc/bash.bashrc+
+CSHRCREAD=true+
+LS_COLORS=no=00:fi=00:di=01;34:ln=00;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=41;33;01:ex=00;32:.cmd=00;32:.exe=01;32:.com=01;32:.bat=01;32:.btm=01;32:.dll=01;32:.tar=00;31:.tbz=00;31:.tgz=00;31:.rpm=00;31:.deb=00;31:.arj=00;31:.taz=00;31:.lzh=00;31:.zip=00;31:.zoo=00;31:.z=00;31:.Z=00;31:.gz=00;31:.bz2=00;31:.tb2=00;31:.tz2=00;31:.tbz2=00;31:.avi=01;35:.bmp=01;35:.fli=01;35:.gif=01;35:.jpg=01;35:.jpeg=01;35:.mng=01;35:.mov=01;35:.mpg=01;35:.pcx=01;35:.pbm=01;35:.pgm=01;35:.png=01;35:.ppm=01;35:.tga=01;35:.tif=01;35:.xbm=01;35:.xpm=01;35:.dl=01;35:.gl=01;35:.wmv=01;35:.aiff=00;32:.au=00;32:.mid=00;32:.mp3=00;32:.ogg=00;32:.voc=00;32:*.wav=00;32:+
+LS_OPTIONS=-N --color=tty -T 0+
+SAPSYSTEMNAME=DE2+
+DIR_LIBRARY=/usr/sap/DE2/SYS/exe/run+
+LD_LIBRARY_PATH=/usr/sap/DE2/SYS/exe/run+
+DB2INSTANCE=db2de2+
+DB2DBDFT=DE2+
+dbms_type=db6+
+dbs_db6_schema=saperp+
+LDIL0219EAP01:de2adm 55>+
Regards,
Nithin.
Edited by: nithinrayal on Apr 25, 2010 5:43 AM
Edited by: nithinrayal on Apr 25, 2010 7:11 AM
Edited by: nithinrayal on Apr 25, 2010 7:13 AM

[SOLVED]Remote location in thunar

Hi,
//EDIT
I added to xinit.rc "exec dbus-launch openbox-session", and now I am able to use some thunar features
gvfs 1.18.3-3
gvfs-smb 1.18.3-3
fusesmb 0.8.7-4
fusesmbtool 0.3-2
smbclient 4.1.5-1
samba 4.1.5-1
thunar-shares-plugin 0.2.0-7
thunar-vfs 1.2.0-1
smbtree shows me shares, but I cant figure out how to manage them via thunar ;/
Is there some file where I need to enable remote location ?
Thanks,
I tried tips from topics below, but nothing works ;/
https://bbs.archlinux.org/viewtopic.php?id=155075
https://bbs.archlinux.org/viewtopic.php?id=169448
https://wiki.archlinux.org/index.php/sa … nd_PCManFM
https://wiki.archlinux.org/index.php/Th … _locations
Last edited by chosen (2014-03-01 23:49:19)

in xfce4 (4.8.0.3, the version I am using in ubuntu):
You can do this to chang the icons in thunar and through the xfce desktop
1) Click the main menu (Xfce menu at the bottom-left of the screen)
2) Click Settings -> Appearance
On Appearance dialog:
1) Click Icons tab (or press alt+i)
2) if you have icon themes installed you can selec them (such as Tango)
-- this will change iconds for the entire desktop:
Thunar, Xfce menu, etc
EDIT: I now realize that this was about changing icon colors and the above was already noted in the first post
.. any way it helped me change my icon theme to Tango...thanks
Last edited by NeoH4x0r (2012-07-01 23:32:11)

Gateway on Dialog Instance

Hello
On the Dialog instance I am getting error
LOCATION SAP-Gateway on host devserver14 / sapgw10
ERROR partner 'devserver1:sapgw10' not reached
Apart from this, when I log on to SAP Central Instance I check SMGW, here gateway running. But same TCODE at Dialog Instance nothing appears.
To my understanding thee should be only one gateway in the entire system. How can I ectigy this error

Maintain the ports in the service file in both your CI and DI.... just add sapgwXX 33XX/tcp for each instance (where XX is the instance number), and make sure the host of your DI is maintained in the host file of the CI and viceversa, that should solve the problem.
Theres 1 gateway per instance.
Regards
Juan

Dialog Instances in remote locations

Similar Messages

Maybe you are looking for