Dialog problem with ifram

Hello
I have a page and it has html ifram and i have a button to open a dialog the dialog dose not open if the page have the html ifram.
if i removed the iframe the dialog open successfully .
is there and ifram in ADF or what i can do if i want to use html ifram .
Regards
Weshah79

I dont think there is any ADF iframe component. Regions are used for such requirements.
And by the way instead of looking for an iFrame looks for what exactly you want to do..
In other words, please tell what is your exact requirement in functional terms.. like how your page looks like? how your page behaves etc etc
http://adfjsf.blogspot.com
http://www.linkedin.com/groupSharingMsg?displayCreate=&connId=-1&groupID=1801839

Similar Messages

Custom Tag -- Custom Component problems with iframes

I have a "project" component that originally iterated over a list of models and created/renderered the corresponding (and fairly complex) interactive UI components for those models. On the client-side, the output from these were then organized neatly into "tabs" via CSS ... all on one page. Since these UI Components are so hefty, when any iteraction was done on one of them, the whole page had to re-render and things got just plain slow. To get around this limitation, I decided to have my "project" component no longer create the UI components himself, but instead generate an IFRAME that points to a page that will generate a single component. This way, any iteraction will just cause that single IFRAME to refresh.
Due to the fact that an IFRAME can only be populated by using the src attribute, I have created a page that contains a JSF View (<faces:view>) and inside is a single custom tag of mine (<mine:displayView>). Let's call this page singleDisplayView.jsf. I create iframes that point to singleDisplayView.jsf with different request params for each (singleDisplayView.jsf?modelName=Foo, singleDisplayView.jsf?modelName=Bar, etc.)
The displayView tag has one attribute called requestQueryString and I use the tag like so:
<t:displayView requestQueryString="<%=request.getQueryString()%>" />The displayView tag's class is DisplayViewTag. In DisplayViewTag::setProperties(UIComponent uiComponent) method, I get the model name out of the request map and set this property on the UIComponent.
The problem is that I'm noticing that as the main page (that contains these frames) loads, setProperties() is only being called twice. After that, the components created by subsequent iframes just seem to be using the modelName from the second frame.
Is there a syncronization issue I don't understand?
Any ideas?
Any help would be much appreciated.
Thanks in advance,
Mark

On a possibly related note, I read this in an article of the JSF application lifecycle:
In the first phase of the JSF lifecycle -- restore view -- a request comes
through the FacesServlet controller. The controller examines the request and
extracts the view ID, which is determined by the name of the JSP page.Could it be that the lifecycle is trying to reuse components from a single view, since all these iframes are pointing to the same page?

Problem With IFrame

Hi Experts,
I Developed Simple Web Dynpro.70 application like displaying the pdf/tif file(this file is coming from R/3) in Iframe.
My Problem is i need to develop the similar kind application in web dynpro 7.1. In web dynpro 7.1 UI Iframe is deprecated, how display the pdf file with out Iframe or in 7.1 is there any other UI element like Iframe.
Please any one tell me, how to display pdf/tif file in web dynpro page.
Regards,
Satya.

Hi Sunil,
take a look to this help page: http://help.sap.com/saphelp_nwce10/helpdata/en/44/a72c155df77038e10000000a422035/frameset.htm

Having Problem with IFRAME (JSP) Netscape!HELP!!!

Hi ppl :)
I�m having problems working out with netscape. If i use a script with one iframe(and i must use it...) at I.Explorer it works but with netscape, no way, the "box" doesn�t appear. :( I need HELP!!
tHIS IS THE CODE :)
<html>
<head>

<title>BBVA - Fundos - Subscrição de Fundos</title>
<LINK rel=STYLESHEET type='text/css' href="estilos/tablas.css">
<script language="Javascript" src="js/fd001_captura_dados.js"></script>
<script language="javascript" src="js/limpar.js"></script>
<script language="javascript" src="js/tiempo.js"></script>
</HEAD>
<body marginheight="0" marginwidth="0" leftmargin="0" topmargin="0" class="pag-contenido" onLoad="controlSesion();">
<%@ include file="includecbtf.jsp" %>
<%
out.println("<form method=\"post\" name=\"captura\" action=\"" + urls.get("action") + "\"> ");
%>
<br>
<center>
<table border="0" cellpadding="0" cellspacing="0" width="500">
<tr>
<td colspan="3" ><img src="images/linea1.gif" border="0"></td>
</tr>
<tr>
<td width="250"><img src="images/fundos.gif" border="0"></td>
<td width="82"><img src="images/titular.gif" border="0"></td>
<td width="169" class="fondotitular"><font class="texttitular"><%=datos.get("usuario")%></font></td>
</tr>
<tr>
<td colspan="3"><img src="images/linea1.gif" border="0"></td>
</tr>
</table>
<br><br>
</center>
<center>
<table cellpadding="3" cellspacing="1" border="0" width="535">
<tr>
<td class="cabeceratitulo" colspan="4"><p class="titulotabla">Intenção de Subscrição do Fundo <%=datos.get("CodigoFundos")%></p></td>
     </tr>
     </td>
<table>
<tr>
<td class="cabeceratitulo" colspan="4"><p class="titulotabla">Condições</p></td>
</tr>
<tr>
<td class=altas colspan="2" >
<%
java.lang.String selec1 = (java.lang.String)datos.get("CodigoFundos");
     String selec= selec1;
     String sel="";
     if(selec.equals("ACC"))
     sel= "fundo1.txt";
     if(selec.equals("APL"))
     sel= "fundo1.txt";
     if(selec.equals("BBVD"))
     sel= "fundo1.txt";
if(selec.equals("BBVO"))
     sel= "fundo1.txt";
     if(selec.equals("BIT"))
     sel= "fundo1.txt";
     if(selec.equals("BON"))
     sel= "fundo1.txt";
if(selec.equals("CAS"))
     sel= "fundo1.txt";
     if(selec.equals("CPZ"))
     sel= "fundo1.txt";
     if(selec.equals("EXT"))
     sel= "fundo1.txt";
     if(selec.equals("FINVEST"))
     sel= "fundo1.txt";
     if(selec.equals("GLO"))
     sel= "fundo1.txt";
     if(selec.equals("MIX30"))
     sel= "fundo1.txt";
     if(selec.equals("MIX60"))
     sel= "fundo1.txt";
     if(selec.equals("MI3"))
     sel= "fundo1.txt";
     if(selec.equals("MI6"))
     sel= "fundo1.txt";
     if(selec.equals("PPA"))
     sel= "fundo1.txt";
if(selec.equals("PPR"))
     sel= "fundo1.txt";
     if(selec.equals("TXV"))
     sel= "fundo1.txt";
     %>
<iframe width=500 height=300 src=js/<%=sel%>></iframe>
</tr>
<tr>
<td align="right">
     <img src="images/aceito.gif" border="0" alt="Aceito">
</td>
<td>
     <img src="images/naceito.gif" border="0" alt="N�o Aceito">
</td>
</tr>
</table>
<br>
</center>
<center>
<table cellpadding="3" cellspacing="1" border="0" width="535">
<tr>
<td class="cabeceratitulo" colspan="4"><p class="titulotabla">Intenção de Subscrição de Fundos</p></td>
     </tr>
<tr>
<td class="formgrisosc" width="120"><p class="dato">Seleccione Conta:     </p></td>
<%
java.util.Vector v = (java.util.Vector)(datos.get("ListaCuentas"));
java.util.Hashtable elem;
java.util.Enumeration e = v.elements();
%>
               <td class="formgrisosc" colspan="3">
<select name="conta" size="1" class="formgrisosc">
<%
while (e.hasMoreElements()){
elem = (com.ibm.dse.base.Hashtable)(e.nextElement());
String cuenta = ((String)elem.get("s_banco")).trim()+"-"+((String)elem.get("s_oficina")).trim()+((String)elem.get("s_dcontrol")).trim()+((String)elem.get("s_num_cuenta")).trim();
out.println("<option value=\"" + cuenta + "\">" + cuenta + "</option>");
%>
</select>
</td>
<tr>
<td class="formgriscla" width="120"><p class="dato">Tipo de Subscri��o:</p></td>
<td class="formgriscla" colspan="3">
          <select name="tiposubs" size="1" class="formgriscla">
<option>Eventual</option>
</select>
</td>
</tr-->
<tr>
<td class="cabecera" colspan="4"><img src="images/1x1.gif" width=1 height=3 border="0"></td>
</tr>
</table>
<br><br>
<table cellpadding="3" cellspacing="1" border="0" width="535">
<tr>
<td class="cabeceratitulo" colspan="4"><p class="titulotabla">Preencha um dos seguintes campos</p></td>
     </tr>
<tr>
<td class="formgrisosc" width="120"><p class="dato">N�mero de Up's:</p></td>
<td class="formgrisosc" colspan="3">
<input type="text" name="numero" size="15" maxlength="15" class="formgrisosc">
</td>
</tr>
<tr>
<td class="formgriscla" width="120"><p class="dato">Montante:</p></td>
<td class="formgriscla" width="80"><input type="text" name="montante" size="15" maxlength="15" class="formgriscla"></td>
<td class="formgriscla" width="50"><p class="dato">Moeda:</p></td>
<td class="formgriscla">
<select name="moeda" size="1" class="formgriscla">
<option value="Escudos" selected>Escudos</option>
<option value="Euro" >Euros</option>
</select>
</td>
</tr>
<tr>
<td class="cabecera" colspan="4"><img src="images/1x1.gif" width=1 height=3 border="0"></td>
</tr>
</table>
</center>
<center>
<table border="0" cellpadding="0" cellspacing="2">
<tr>
<td valign="top"><img src="images/limpar.gif" border="0" alt="Apagar"></td>
<td valign="top"><img src="images/continuar.gif" border="0" alt="Continuar"></td>
</tr>
</table>
</form>
</center>
<br><br>
</body></html>
Please help me out, because the iframes are terrible!
thanks,
Alex

The <IFRAME> tag is IE specific; Netscape doesn't
recognize it.
Netscape uses the <LAYER> and <ILAYER> tags to
accomplish the same thing; if you need to have a
page-internal frame that has its own source, you'll
need to use one of these tags.
If you need to work with both browsers, you'll need to
write out your tag based on the browser being used.
Have fun!hello!
I need one way to call another page, like you see in the code, a extension.txt, how can i do that?? can you make a sugestion?
The <ilayer> doesn�t work :(

Problem with iFrame when viewing in FireFox only, IE loads fine.

I am building a website using WordPress, I originally built it in IE but when I looked at it through Firefox, everything was fine except one page where my iFrame is. It has cut half of it out, and nothing I do fixes it. It still looks fine in IE but I need to it work in Firefox as well. Please help!

I am building a website using WordPress, I originally built it in IE but when I looked at it through Firefox, everything was fine except one page where my iFrame is. It has cut half of it out, and nothing I do fixes it. It still looks fine in IE but I need to it work in Firefox as well. Please help!

I've developed the problem that when I click on something I get a dialog box with a mess of stuff such as: Back,re;oad page ,Open in dashboard ,print page, etc. It's quite annoying!

I have a problem that when I click on something I get a dialog box with Back,Reload page, Open in Dashboard,View Source Save page as ETC. I don't get the normal or expected respose to a simple "click". Another problem. For some reason the back and forth arrows it the tool bar of Safari have shifted from the upper left hand cornor to the uuuer rihht hand cornor.

Something is seriously wrong then. Did you move it? There are several Library folders. One of them should be inside your HOME folder.
If WZZZ suggestion does not work, re-install your OS by using Mac OS X 10.6.8 Update Combo. When done, repair permissions and restart your computer.

Problem With File Download Dialog Box

Hi all,
I have jsp page that allows a user to export oracle data to excel.
I have these code in my page:
<%@ page contentType="application/vnd.ms-excel" %>
response.setContentType ("application/vnd.ms-excel");
response.setHeader ("Content Disposition",
"filename=\"historicalrate.xls\"");
I run the page and it popups a file download dialog box with Open and Save buttons.
When I click the Save button a Save As window opens with a hr.xsl file name and Microsoft Excel Workbook(*.xls) as save type. It is what I want.
The problem I have is when I click the Open button on the file download dialog box it displays data in excel format on a browser well. Then I click File > save as on browser's tool bar the Save As window pop up with no file name and a default Text(tab delimited)(*.txt).
I need the file name and Microsoft Excel Workbook(*.xls) as default save type.
Any help would be greatly appreciated.
Please help
Thanks

I have the same problem with hui_ling.
When user click on "Open", Excel start and open excel file correctly but the file name on excel title bar. 'Cause the file name is in Japanese characters. Any one can help me?
Message was edited by:
TNTVN

Annoying problem with shift key in limit dialog Brio 6.6.4

<p>My company uses Brio Insight & Designer v6.6.4. We (meaning almost all users) are encountering an annoying problem whenadding a limit to a query using the limit dialog. When try toenter a limit value using the shift key, as in Shift T to enter acapital T, the limit value field ends up with a value like"TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT". Thisis very annoying and widespread problem with us. It seemed tostart when we upgraded to Win XP SP2. Is there a solution forother than to "upgrade to the latest version"?</p>

Unfortunately not. The only way we avoided this issue was to upgrade or write the text into a text editor and cut and paste the text into the section name box.

Customized KeyboardFocusManager problems with JOptionPane-Dialogs

Hi,
I have a problem I'm not able to solve: With Java 1.4.2 unter Linux, as well as all newer Java Versions (1.4, 1.5, 1.6) under Windows, dialogs created by JOptionPane.showXXXDialog do not react to keyboard events like <Tab> any more when using a customized KeyboardFocusManager. Java 1.5 and 1.6 under Linux work fine.
Here is what I did:
I have a JFrame and want some customized focus control when navigating through the Frame with <Tab>. Therefore I've implemented a class
public class EfaFrameFocusManager extends DefaultKeyboardFocusManagereand said in the main JFrame:
EfaFrameFocusManager myFocusManager = new EfaFrameFocusManager(this,FocusManager.getCurrentKeyboardFocusManager());
FocusManager.setCurrentKeyboardFocusManager(myFocusManager);The constructor of my EfaFrameFocusManager stores the JFrame (this) and the original KeyboardFocusManager (2nd arg) for later use. Within my own FocusManager, I've implemented the method
public void processKeyEvent(Component cur, KeyEvent e)which is checking whether the desired Frame (efaFrame) is currently active or not. If it is active, it's performing my customized operations which is working well. If it is not active (e.g. because a dialog created with JOptionPane.showConfirmDialog() is open), it should perform default actions. So I said within processKeyEvent:
if (!efaFrame.isActive()) { // efaFrame is the previous "this" arg
fm.processKeyEvent(cur,e); // fm is the previously stored CurrentKeyboardFocusManager
return;
}Instead of invoking processKeyEvent on the original KeyboardFocusManager fm, I also tried super.processKeyEvent(cur,e);, but without any change in behavior.
As I said before, this is working well under Java 1.5 and 1.6 with Linux.
However, it is not working unter Windows (any Java version I tried, including 1.4, 1.5 and 1.6) and also not unter Linux with Java 1.4. With these combinations, dialogs created by JOptionPane.showXXXDialog(...) do not respond to the <Tab> key. I do see that my own FocusManagers processKeyEvent method is invoked, and I also see that it invokes the one of the original FocusManager, but the Dialog doesn't react.
What am I doing wrong?
Nick.

I have a JFrame and want some customized focus control when navigating
through the Frame with <Tab>. sounds like you should be doing this via a FocusTraversalPolicy
http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html#customFocusTraversal

Problem with non modal ADM dialog

I have problem with focus and mouse and keyboard event passing to non modal dialog if some modal window was opened and closed on Windows platform.
I have this problem in my plugin, but also I did some tests with SDK WordFinder Plugin.There are 2 dialogs open there : CountDialog-non modal dialog and PromtDialog-modal one. I commented all lines in function DeleteCountDialog to leave this dialog on the screen. So, first, when "create page map" menu is selected, CountDialog is appearing and stays on the screen. At this stage, it can be moved and get focus when is clicked.After that, I click on "find word by word offset" and then PromtDialog is appearing. when I close Promtdialog by clicking on OK or Cancel, CountDialog is "freezing" - means, it can not be moved and does not get focus when I click on it.
Is it known problem ? Is there is some workaround there ?
thanks in advance,
Lidia.

Thanks a lot for your response.
I did changes as you recommended, but still have the same result.
So I have WordFinder from Acrobat SDK 8 with only one file changed:WordFinderDlg.cpp - see below.The result is the same:
1. I open Acrobat->Open some file
2. Click on "Advanced->Acrobat SDK->Word Finder->create Page Map" menu
3. "count" non Modal Dialog is opened and working and then stays on the screen and can be moved without problem.
4. Now I click on "Advanced->Acrobat SDK->Word Finder->find Word By Offset" - Modal Promt Dialog is opened. click some number and then click ok - choosen word is selected in Acrobat. From this moment, first "Count" dialog is frosen - can be selected, can not be moved.
The only workaround I see here is to create non Modal dialog every time I close Modal one.
Could you please advice ? May I please send to you project in zip ?
I really need it ASAP ?
thanks in advance,
Lidia.
ADOBE SYSTEMS INCORPORATED
Copyright (C) 1994-2006 Adobe Systems Incorporated
All rights reserved.
NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source other
than Adobe, then your use, modification, or distribution of it
requires the prior written permission of Adobe.
\file WordFinderDlg.cpp
- Implements a modeless progress dialog and a generic prompt dialog.
// Acrobat headers
#ifdef WIN_PLATFORM
#include "PIHeaders.h"
#endif
#include "ADMAcroSDK.h"
#include "resource.h"
Constants/Declarations
static ADMDialogRef countDialog;
static AVWindow gAVWindow = NULL;
// Global variables used for simplicity
const ASInt32 MaxLen = 80;
static char textStr[MaxLen];
static char titleStr[MaxLen];
static char msgStr[MaxLen];
Modeless Progress Dialog
/* UpdateCountDialog
** Updates the dialog with a new GUI function to show count number
void UpdateCountDialog(ASInt32 cnt)
ADMItemRef itemRef;
itemRef = sADMDialog->GetItem(countDialog, IDC_COUNT);
sADMItem->SetIntValue(itemRef, cnt);
sADMDialog->Update(countDialog);
/* CreateCountDialog
/** GUI function to delete the count dialog
void DeleteCountDialog(void)
// destroy dialog
/*if (countDialog) {
sADMDialog->Destroy(countDialog);
countDialog = NULL;
// Release ADM
ADMUtils::ReleaseADM();*/
/* SettingsCountDialogOnInit
** Called to initialize the the dialog controls
ASErr ASAPI CountDialogOnInit(ADMDialogRef dialogRef)
ADMItemRef itemRef;
itemRef = sADMDialog->GetItem(dialogRef, IDC_COUNT);
sADMItem->SetUnits(itemRef, kADMNoUnits);
sADMItem->SetIntValue(itemRef, 0);
return kSPNoError;
/* CreateCountDialog
** Creates the modeless dialog.
void CreateCountDialog(void)
// Initialize ADM.
ADMUtils::InitializeADM();
// Display modeless dialog.
countDialog = sADMDialog->Create(sADMPluginRef, "ADBE:Wordfinder", IDD_COUNT_DIALOG,
kADMNoCloseFloatingDialogStyle, CountDialogOnInit, NULL, NULL);
Generic Prompt Dialog
/* PromptOnOK
** Called when the user clicks OK. Stores the string entered by the
** user.
static void ASAPI PromptOnOK(ADMItemRef item, ADMNotifierRef inNotifier )
sADMItem->DefaultNotify(item, inNotifier);
// get user input string
ADMDialogRef dialog = sADMItem->GetDialog(item);
ADMItemRef item1 = sADMDialog->GetItem(dialog, ID_PROMPT_FIELD);
sADMItem->GetText(item1, textStr, MaxLen);
sADMDialog->EndModal(dialog,IDOK,FALSE);
AVAppEndModal();
AVWindowDestroy(gAVWindow);
/* PromptDialogOnInit
** Called to initialize the dialog controls.
ASErr ASAPI PromptDialogOnInit(ADMDialogRef dialogRef)
gAVWindow = AVWindowNewFromPlatformThing (AVWLmodal, AVWIN_WANTSKEY, NULL, gExtensionID, sADMDialog->GetWindowRef(dialogRef));
AVAppBeginModal (gAVWindow);
sADMDialog->SetText(dialogRef, titleStr);
sADMDialog->SetDefaultItemID(dialogRef, IDOK);
sADMDialog->SetCancelItemID(dialogRef, IDCANCEL);
ADMItemRef itemRef;
itemRef = sADMDialog->GetItem(dialogRef, IDOK);
sADMItem->SetNotifyProc(itemRef, PromptOnOK);
itemRef = sADMDialog->GetItem(dialogRef, ID_PROMPT_FIELD);
sADMItem->SetUnits(itemRef, kADMNoUnits);
sADMItem->SetMinIntValue(itemRef, 1);
itemRef = sADMDialog->GetItem(dialogRef, ID_PROMPT_NAME);
sADMItem->SetText(itemRef, msgStr);
return kSPNoError;
/* PromptForInfo
/** Generic prompt dialog that gets a text string from the user.
/** @return IDOK or IDCANCEL.
ASInt32 PromptForInfo(const char *title, const char *msg, char *buf, ASInt32 bufLen)
if (!buf || (bufLen == 0))
ASRaise (GenError(genErrBadParm));
// Initialize ADM.
ADMUtils::InitializeADM();
// init data
buf[0] = 0;
strncpy(titleStr, title, sizeof(titleStr) - 1);
strncpy(msgStr, msg, sizeof(msgStr) - 1);
// Dispaly modal dialog to get user input
ASInt32 rc = sADMDialog->Modal(sADMPluginRef, "ADBE:Wordfinder", IDD_PROMPT_DIALOG,
kADMModalDialogStyle, PromptDialogOnInit, NULL, NULL);
// get user input data
if (rc==IDOK)
strcpy(buf, textStr);
// Release ADM
ADMUtils::ReleaseADM();
return rc;

Problem with PJC (Print Dialog) - Forms 10g

I have a problem with my PJC for Forms 10g r2. When I try to connect and run my PJC (raise Print dialog and put printer name in some text item) I get following message:
oracle.forms.net.ConnectionException: Forms session <2> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
When I started application, on Java console I saw this message, so I think the server configuration is fine (I change everything I need in Default.env and FormsWeb.cfg files):
Loading http://devsrv/forms/java/jESPrintDialog.jar from JAR cache
What can I change with server configuration or deploying my project to this PJC can work normaly?
Thanks....

Hi and thanks!
I resolve one part of my problem. Tt was about diferent compiler (in JDeveloper 10.1.3 compiler is 1.5 and in my oc4j server JRE is earlier version, so it can`t work normaly).
I comiled PJC in 1.4 version of compiler and now I can start and run my PJC.
But, there is another problem:
this is my part of java code (note: everything work fine except one line when I want to get printer name from select printer dialog):
try {
boolean b;
PrinterJob job = PrinterJob.getPrinterJob();
b = job.printDialog();
try {
return job.getPrintService().getName();
catch (Exception e) {
System.out.println("Error: "+e.getMessage());
return "My error:";
} catch (Exception e) {
System.out.println("ERROR: " + e.getMessage());
return "Problem with PJC [esoft]";
So, when pjc want to get back printer name
return job.getPrintService().getName();
i get following error (on Java console):
java.lang.NoSuchMethodError
     at happypjc.PDialog.getProperty(PDialog.java:50)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Can you give me some hint about it. Everything is OK now, except this (very important) peace of code!
best regards
mret

"Dialog box "PROBLEM WITH SHORTCUT"

When my T40 p starts up I keep getting the following message, over and over again until I close the system tray IBM Connect bar.
"Dialog box “PROBLEM WITH SHORTCUT”
The drive or network connection that the shortcut IBM Access Support.lnk refers to is unavailable. Make sure that the disc is properly inserted to the network resource is available, and then try again. "
Help!

You'll need to find your iTunes folder. It's usually located on your main hard disk under My Documents/My Music/iTunes. Copy this whole folder to another hard drive (if possible) or burn it on a CD (probably will take more than one--depending upon how large your library is) or DVD. Once you have a good backup of your library, try downloading and reinstalling iTunes.

Problem with 'Save as' dialog

Hi,
i have a strange problem with my 'Save as' dialog in all my appications, whenever i 'save as' it goes to my documents folder all the time, it used to go to the last folder i'd saved to. anybody have any clues as to what's going on? also, it doesn't seem to have the little traingles beside the folders anymore, so you can't click on them to quickly see what's in the folders.
this is on a powerbook Ti 1Ghz running 10.4.7
thanks

thanks Peter for trying to help
ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now.

Secure printing problems with the dialog box

Hi!
Some one which has problem with the scure dialog box then using secure printing?
then we print in Adobe acrobat reader X 10.0.1 the dialog box for entring your pin nummer appearing under acrobat, causeing the program to locking until you go to the dialog box and clicking on it and enter the pin. The problem is that adobe not showing the dialog box in front of the printing overall dialog.
had nog problem with the old 9, it started then we uppgraded. Haw tride a nother driver but haw same issue. And all other programs works greate, word, notepat etc so it is just Adobe that has the problem.. ?
/J

Hi!
Its´s XP sp3 and the printer is a network printer(Toshiba e-studio 4520c) running a PCL6 driver.
Screen capture is not so much to see i think, running Swedish interface to. The ordinary dialogbox för printing is the first thing thats pops up, and then adobe reader frezes because the secund box pops up under adobe, you can click on it in the "toolbar" to continue. One thing that is diffrent when you print in adobe is that you can se on the "toolbar" for the popup box for the pin/password box is a Adobe icon on it. It is not so in example when printing in word, ie8 etc.
The problem is that many users dont see it and thinks the program has stopt working.
Im now going to try the PS driver from toshibas homepage..
thanks for help!

Cursor problem with dialogs

Hello all!
I'm having this problem with cursors:
I have a frame, and when an action in process, a modal dialog is displayed with the message "Please wait...". During the operation I set the cursor of the modal dialog and the frame to "Cursor.WAIT_CURSOR".
My problem is that only when the mouse is over the modal dialog, only then the cursor is WAIT_CURSOR (I want to be WAIT_CURSOR all over the frame). Most probably this is because the frame is not active (because of the modal dialog) and so the cursor is not changed there.

stebou, adammc, welcome to the forum,
you could try turning off the touchpad tapping feature, or reducing it's sensitivity. It maybe that you are brushing the touchpad whilst typing. Using the Fn + F8 key combination will get you to the UltraNav settings.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Dialog problem with ifram

Similar Messages

Maybe you are looking for