Dialog Response Time is Missing in ST03N

Hi,
In one ofour SAP system the dialog response time data is missing in ST03 however other Task type such as RFC,SPOOL,AUTOABAP,AUTOCCMS,BACKGROUND etc are visible.
OS COllector job is running fine and collecting all data except DIALOG
Step for issue reproduction :
ST03n > Expert Mode > instance > under workload overview > Task Typne Name ( Here it should show the data/response time for Background,spool,update etc).
Kindly help me to know why it is missing. Screenshot for the same is attached here.
Regards,
SURYA.

Hello Surya
here screenshots from my test:
ST03 for my instance before I have executed something on it, no dialog task type:
here I have connected to the instance through SM51, still no dialog task type:
and here I have connected directly through SAP Logon to this instance, now my actions on the instance are displayed as dialog task type:
If your users connect through RFC to the instance, then all their actions are RFC task type actions. As soon as a user logons directly to the instance, dialog task type will appear in ST03.
regards,
Alwina

Similar Messages

  • CCMSPING not collecting "Dialog Response Time"

    In Solution Manager 4.0, we have configured the CCMSPING agent to monitor a number of systems.  For only two of those systems, CCMSPING is not collecting "Dialog Response Time" (Availability_DiaRespTime) and "Standardized Response Time" (Availability_StdRespTime) data.  All other MTE's for those two servers are being successfully collected.  Looking at CPH, for at least one of those systems, the data was collected for a couple of weeks and then stopped.  For the other system, that data has never been collected.  The two systems with problems are the only two ECC 6.0 systems in the landscape.  In the RZ20 monitor, all that it says is that the "Value is obsolete".  I have deactivated and reactivate CCMSPING one of the systems without any change.
    Has anyone seen anything like this?  Is there any way that I can find out what errors are occurring?

    I have already a ccmsping agent registered on my central system but it seams to be not correctly registered.
    I registered correctly the agent with the '-push' option and it seams to work properly now.
    Thanks for your response
    Regards,
    Emmanuel Coindre.
    [www.emmanuelcoindre.fr|http://www.emmanuelcoindre.fr]

  • High Dialog response time

    Hi,
    We have a solman 4.0 system. The average dialog response time of the system is very high. What can be done to bring down this response time??
    Thanks in Advance
    Amit.

    Hi Amit,
    Please check out the breakdown of dialog response time in Workload Monitor. Also, use the Time Profile to check if this high response time is at specific timings.
    regards, Shantanu

  • Dialog response time comaprison between cities

    Is there any way where we can compare dialog response time  in different cities for the same transaction?
    As we are facing issues with response time in 2 different cities and response time in 1 city is lesser comared to other city while fetching the same data.
    System is an ABAP ECC 6.0 R/3 system.
    We checked that GUI time is also different in both cities.

    Hi,
    Check the network times from each city with the SAP utility niping.
    Check also if people from the different cities are connected to the same application servers.
    Regards,
    Olivier

  • Average Dialog Response Time.

    Hello friends.........
    What is the table or function module that stores the data of Average Dialog Response Time (transaction ST03)? After executing ST03, when a particular date is selected, i need the table or function module that stores the value corresponding to Dialog and Time.
    Thanks & Regards,
    Ajay.

    check ST05? i dont have idea on St03.
    or STAT .
    Regards
    Prabhu

  • Dialog response time exceeds threshold (SOLMAN Alert)

    Dear All,
    I found an alert in Solution Manager,
    2.023 msec > 2.000 msec Dialog response time exceeds threshold (56 dialog steps)
    What does this alert means?
    Are SAP system still in a good performance?
    And what kind of action i have to do to clear this alert..?
    thanks and regards
    Rio(nubie)

    Hi
    What does this alert means?
    see answer Mapp Tyrone above
    Are SAP system still in a good performance?
    SAP performance is not determined only by response time. you have to look globally: your free memory, your ABAP dumps, your swap, your database statistics etc.
    And what kind of action i have to do to clear this alert..?
    No need to clear it. All you have to do is tune your SAP system to increase your current performance, and one indicator of that is the better response time.
    hope it help you.
    rgds,
    Alfonsus Guritno.

  • Table name for dialog response time without GUI in ST03?

    In SWNC_COLLECTOR_GET_AGGREGATES, cnt00x (x =1,2,3... 9) gives me the proportion of transaction steps with a response time between 0s and the upper  limit of the individual response time categories (includes GUI time), broken down by task type. But where is the data without GUI time store? any ideas?

    Hello Surya
    here screenshots from my test:
    ST03 for my instance before I have executed something on it, no dialog task type:
    here I have connected to the instance through SM51, still no dialog task type:
    and here I have connected directly through SAP Logon to this instance, now my actions on the instance are displayed as dialog task type:
    If your users connect through RFC to the instance, then all their actions are RFC task type actions. As soon as a user logons directly to the instance, dialog task type will appear in ST03.
    regards,
    Alwina

  • How to find the top ten reports consuming the high response times in st03n?

    HI Basis Gurus,
    Please could anybody tell me "How can one find the top ten high response time consuming reports in st03n transaction or in is there any other way to find out this.Please help me its urgent....
    Advance thanks....

    hi Meghadoot,
    below is an example for your request.
    ST03N
    Expert mode
    Server name - Day- double clicdk Today
    In analysis view - Ranking lists-double click Top Response time
    Regards

  • Average Response Time Different in SLR/EWA (in solman) and ST03 (in satelli

    Hi All,
    We find that the average dialog response time shown in SLR and EWA reports of Solman is much lower (250 ms) whereas the dialog response time shown in ST03 transaction of the system (XI instance) is high 2000 ms.
    Which one is correct and how can I correlate these two values if both are right in their own way.
    regards

    Hello,
    The data source is ST03, therefore unless there is an issue with the collectors, you should assume the ST03 data is correct.
    Pleae run RTCCTOOL on the managed system and ensure ST-PI and ST-A/PI are current.. Also make sure your SAPOSCOL is current.
    There is a possibility that there was an error during preparing the transport to send the data back to Solution Manager, so scan the SDCCN task logs for any errors/warnings on the managed system. You can also check the transport to see what vaues are being returned to Solman's service session. If the have the same value as ST03 at this point, then there is an issue witht eh EWA/SLR provcessing. If the data is not the same here as ST03 then there was an issue with the SDCCN tasks.
    If the data collection is not at issue and the transfering of that data to Solution Manager service session had no errors, then Please follow Jared's recommendation, as this would then be an issue processing the service sessions, and this could be due to outstanding Service Content updates. This can be checked with transaction code AGS_UPDATE.
    Regards,
    Paul

  • Avg iview response time

    At Workload Analysis (Sol man Diagnostics) why I have u201CAvg servlet/webdynpro response timeu201D and u201CAvg iview response timeu201D?
    I mean, the request time of the iview is calculated separated from the request time of the servlet (In case I have an iview with a servlet inside), if so I have to sum both to have the complete time request? Or the KPI u201Cavg iviewu201D is for the iviews that does not have a servlets or a webdynpros inside?
    I am a little confused with these concepts, someone can explain to me or show me some document that explains this?
    Thanks in advance
    Regards,
    Walde Requena

    I don't understand the question.
    Do you want to know how to display dialog response time in ST03? If so, your instructions tell how to bring up that screen. It will show Dialog response time providing there have been Dialog steps executed.
    Or do you want to know which function module you call to get dialog response time data? Use SAPWL_WORKLOAD_GET_STATISTIC to get hourly, daily, etc. data (for a given day and instance) for each task type.
    Tim

  • Dialog resposne time

    Dear All,
    We have installed production ECC 6.0 on SUSE 10 Linux 64 bit and MAX-DB which has quad core processor and 16GB of RAM.
    it has dialog response time of 600-700. We have tuned the following parameters.
    Anyone could tell me, what are the parameters to tune to get dialog response time to around 200-300.
    We have tuned DB parameters and following ABAP parameters
    em/initial_size_mb --> 2048
    abap/buffersize --> 400000
    rsdb/ntab/entrycount --> 30000
    rsdb/ntab/ftabsize --> 60000
    rsdb/ntab/irbdsize --> 9500
    rtbb/buffer_length --> 60000
    rsdb/cua/buffersize --> 10000
    zcsa/table_buffer_area--> 100000000
    zcsa/db_max_buftab --> 10000
    zcsa/presentation_buffer_area --> 20000000
    sap/bufdir_entries --> 10000
    rsdb/obj/buffersize --> 40000
    rsdb/obj/max_objects --> 20000
    gw/max_conn_per_wp = 200
    rdisp/tm_max_no: 2000
    rdisp/max_comm_entries: 2000
    rdisp/max_arq: 2000
    gw/max_conn: 1000 (Can be increased to 2000)
    gw/max_sys: 2000
    gw/max_overflow_size: 25000000 (can be increased to 100000000)
    gw/max_shm_req: 400
    rdisp/appc_ca_blk_no: at least 500,     
    rdisp/wp_ca_blk_no: 1000
    best regards,
    siva
    Message was edited by:
            Siva R

    Hi Siva,
    You posted your query in wrong forum. Post it in BAsis(Netweaver Application Server) forum.
    Regards,
    Atish

  • Response times -- Dialog Steps  Week / Weekend: How to compare it?

    Hello,
    We have SAP ECC 6.0 running on a HP-UX Cluster. Our service is a  7x7 24x24.
    Like most of companies system activity is lower in the weekend, for example:
    From Monday to Friday an average of 2.500.000 DIALOG Steps with a response time of 900 ms.
    On Saturday we have an average of: 650.000 DIALOGS Steps with a response time of 650 ms.
    On Sunday we have an average of: 250.000 DIALOG Steps with a response time of 450 ms.
    So the question is: It have sense that with 10% of user activity on sunday response time is near to 50% (comparing 450ms on sunday with 900 ms in the week) why the response time on sunday is not 10% of response time in the week, something like 90 ms?
    What is the correct way to analyze this numbers? Probably you never will have a linear function to represent this situation (in fact this is a Exponential function). SAP always have this behavior?
    sap_responseTime(t) = exp(t) Where t  is the time in ms.
    F(450) = 250.000    
    F(650) = 650.000    
    F(900) = 2.500.000 
    Please some tips about this topic.
    Best Regards,
    Erick Ilarraza

    Hi Erick
    Response times entirely depend on the overall system hardware, usage and user activities over the system. In your case, during weekends , a lower number of dialog steps suggest fewer dialog logons in comparison to the weekdays.
    In contrast, the response time ( 50%) in comparison to weekdays suggest that the users are executing some heavy transactions that show increased overall response time. These may be transactions that run reports with expensive SQL statements or fetch huge volumes of data from your database ( in comparison to the weekdays).
    There cannot be a linearity maintained between the dialog steps and response times when users log in and work randomly in a system
    I hope this helps
    Regards
    Chen

  • ST03N Tcode not showing last 3 days average response time

    Hi,
    In my Production system not showing last 3 days average response time.In our production 1 (CI+DB) and 3 dialog instances are there. In all servers sapcollector working fine but in all servers not showing last 3 days values.Please advise solution.
    Thanks,
    Srinivas.

    The following are the prerequisites needed to get the workload monitor(st03) working.
    1)      The system time zone of the SAP and the Operating system has to be same. This can be done by customizing time zones of the SAP using the Tcode STZAC.
    2)     All the standard background jobs has to be scheduled to run. This can be done by scheduling the standard background jobs using the Tcode SM36.
    3)     The following parameters has to be added to the instance profile.
    Parameter                                                  Value(default)                                                  Description
    i.     stat/as_collect                                                          = 2                                          Application statistic: detailed records.
    ii.     stat/as_level                                                              = 1                                          Records for application statistic are active.
    iii.     stat/max_files                                                           = 48                                        Max. no. of stat files to be kept.
    iv.     stat/as_max_files                                                    = 48                                        Max. no. of appl. stat files to be kept.
    This can be done by editing the profiles using the Tcode RZ10.

  • How can increase response time:dialog

    Dear all,
    how can i change(increase/decrease) dialog workprocess response time?

    > how can i change(increase/decrease) dialog workprocess response time?
    Can you please tell us exactly what you want to do?
    Read
    http://help.sap.com/saphelp_nw04/helpdata/en/21/2c8f38c7215428e10000009b38f8cf/frameset.htm
    about what "Response time" is defined and then please rephrase your question.
    Markus

  • Slow response time for "Print Settings" dialog in CS6

    steps performed to resolve -  with no success:
    disabled NET DRIVER HPZ12
    updated CS6 with latest fixes
    printer driver is up to date
    usb driver up to date
    swapped USB ports across three ports
    ran font test with no errors
    changed default Win 7 printer to Adobe PDF.
    Windows 7 has latest fixes.
    Configuration is:
         Win 7 Home 64 bit
         8 core AMD
         16 GB memory
         Photoshop CS6 64 bit
         HP c410a printer - USB connected
    32 bit Photoshop CS4 on the same platform does not have the response time issue.

    From Adobe Support:  17 secs response time is a normal time interval for the "Print Settings" dialogue.

Maybe you are looking for