Dialog Screen on Preview Button of ME21N

How to Call Dial Dialog Screen on Print Preview Button in Transaction ME21N?

Hello,
I am really not very sure if you can give another dialog box to take the user entry for Print out or Adobe output.
I had rather suggest you to implement the header badi to create a customer screen and then in that give a radio button option in which the user would select the type of output required.
This would considerably reduce your time and make your work easier.
Please revert if you are unclear with this.
Regards,
RK

Similar Messages

Module Pool - Error message on a Modal Dialog screen with input

Hello All,
I have a modal dialog screen which is called on F4 help of a input field. This dialog screen has radio buttons on it to select. On selection, we check if the user is authorized to that option. If not, raise and error message with command MESSAGE msgid.....
When the error message pops-up and when clicked ok on it, the radio buttons on the modal dialog screen gets disabled. I want to have the modal dialog box to be able to accept the new radio button as input.
Can anyone please suggest.
Thanks,
Smita

Put all of your Radio buttons in the CHAIN ... ENDCHAIN with one module.
CHAIN.
    FIELD rb1.
    FIELD rb2.
    FIELD rb3.
    MODULE check_chain ON CHAIN-REQUEST.   "<< implement logic in check_Chain
ENDCHAIN.
If you want, you can even disable the options before displaying the screen. Do all necessary checks in the PBO and based on that disable the options.
Regards,
Naimesh Patel

Full-screen (spacebar) preview quality testing

[For background story, please read http://forums.adobe.com/thread/1056763 but be warned, it's very l-o-n-g!]
In brief: some people have noted that Bridge full-screen (spacebar) previews (FSPs) don't accurately reflect the sharpness of a photograph. Sometimes this can be explained by individual configuration problems, but it's clear that this is a common issue amongst people using Bridge to assess/score photograph sharpness, without having to build/examine 100% previews for every image.
[It's worth noting that one common reason why FSPs aren't very sharp is because the Bridge advanced preference "Generate Monitor-Size Previews" hasn't been ticked, as this produces a higher resolution image cache. Another cause of very fuzzy previews is random and unexplained, but can usually be solved by restarting Bridge and/or clearing the cache for the selection.]
This discussion concerns the lack of sharpness seen only in FSPs. It can be described as "a subtle but significant loss of detail and sharpness, similar to a slightly out of focus photograph"; imagine a photo with a little bit of blur filter, or a Photoshop PSD at a non-standard zoom setting. This "softening" of the image is caused by Bridge asking the graphics processor to resize the image cache to fit the display. If you select the Bridge advanced preference "Use Software Rendering", you can improve a poor FSP slightly, at the expense of speed, by bypassing the graphics processor.
The test
Visit this web page and download the last image ("2362x3543 pixel, 4.5 Mb") to your computer.
Browse to this image in Bridge, and view it full-screen by pressing Spacebar. Take a screen capture, and save it as a TIFF or PSD.
Adjust your slideshow settings (Ctrl/Cmd-Shift-L), picking "Scaled to Fill", then click on "Play". Save the screen capture, as above.
You now have two screen captures: one FSP, and one cache JPEG reference shot. Examine them side by side at 100%, or layer them in Photoshop and use the hide layer button to flick between images. Pay particular attention to the two left-hand photos, the sharpness check text, and the converging lines.
Make a note of your computer's operating system, graphics processor and driver version, as well as your largest display's pixel dimensions.
Post this information below, together with high quality (10) JPEGs of both screen captures, labelled FSP and REF, and any observations, so we can all see.

OK, it usually takes me a while to let the penny drop, especially when it comes to maths...
I also am busy with the transition of my new Mac pro but with al this here are my results. I include several screenshots but due to upload limit of 2 MB per image in here I downsized the original screenshots a lot, but hopefully it will be clear.
For full screen screenshots I have the asked FSP and REF but also the 100% preview in Bridge with space bar and click. Don't know what your file size is but using EOS 1Dx with 18 MP CR2 files (converted to DNG) it does take me about 1,5 - 2 seconds for both loupe and FSP to build a 100 % preview, and I seem to recall this was not very different behavior on my previous (6 year old) Mac Pro.
You are right (of course... :-) ) regarding the difference between FSP and REF, when studying closely there is a significant detail difference between the FSP and the REF. However, only the 100 % preview matches the original jpeg. The FSP file is on closer look not so good with details but the REF file is only slightly better, both are not correct and therefor the 100 % is still needed.
Here is the FSP screenshot:
and here the REF screenshot:
also the 100 % preview in full screen screenshot:
and finally a composed file with details from original, 100 % REF and FSP:
As said before, at first sight I can't spot significant difference between all options and the full screen (as the preview panel HQ preview) let's me spot the vast majority of unsharpness issues, hence my multiple rounds of sorting and incases of doubt the 100 % option.
So while your theory is correct I'm afraid I (still) doubt the usefulness of this all. If neither the FSP and the REF (although the latter does show a bit better result) can match the results of the original but the 100 % does it well I don't see an easy solution for improvement.
I agree with the quality from the screenshots Curt provided, but Curt also uses the embedded thumbnail instead of HQ preview option. Depending on his needs and hard ware availability it would be nice to see new results with the HQ and monitor sized previews options enabled.
regards
Omke

Lack of a print preview button on the toolbar

Like several users, I miss the availability of a Print Preview button on the toolbar. The reason: Many, many, many web sites configure their web page outputs so that they ignore the size and limitations of the user's printer. For instance, a web page will ignore the page size defined by the user and will just send out data without any regard to what the user can and will be able to print. This results in print lines that are truncated; lines that are wrapped for one word or so; or other types of output that are, at best, difficult to read and interpret. I have tried to load several add-ons which include a Print Preview button, but receive a message that because I have the most up-to-date version of Firefox (5.0.1), I CANNOT USE THEM. HELP!!!!!
Second issue: Size of the icons on the toolbars. I understand that this size is chosen to be the best for the AVERAGE user. But I find that I dislike having to place my nose on the screen in order to discern what icon I'm hovering over (Yes I'm an older individual, wear glasses and am somewhat near-sighted). It would be beneficial if the choice of toolbar icon size was larger than the default as well as the only current choice of smaller than the default.

Is there not a 'Print Preview' and 'Print' command from the '''File''' menu?
You can add an icon for Print commands by right clicking on one of the menu bars, select customize then drag and drop the icon where you want it.

Adding a Forward functionality on the Workitem dialog screen itself

Hi SDM forum members,
I am having some issues with adding a forward functionality to a custom dialog screen.
I tried to add a forward button on the WI screen , which in the background calls a fm that basically calls
SWL_SELECT and then SWL_WI_FORWARD FM , for some reason the forwarding does not complete as expected .To explain further , suppose i am forwarding to X user the the WI still shows up in my inbox , and Workflow log shows both users assigned as agent( me and X) and though there is forwarded icon against user X in the log -> view agent box . The Wi status is ERROR.
example of error-
Error handling for work item 000000055578
Message no. SWF_RUN630
This explians nothing to me but my guess is the issue is that WI gets completed because i execute it while forwarding it .
Now if i get the WI id and input it to the above mentioned FM (se37) then it is forwards correctly.i can see the change in SWI1 log too. it is assigned correctly to user X with the forwarded icon and everything.
So i thought maybe i need to change the status of the Wi back to ready , but that is not possible, can't go back in status, Error again .So i tried doing exit_cancelled in the WF , that does not work either , because that does not forward the WI atall.
So my question is has anybody forwarded the WI by providing an option on the WI execute screen? Is it possible using the SWW fm's ?
Please let me know if anybody has any solutions / ideas/ thoughts.
I wish i could put in some screensshots , but anyways i hope you understand what i am saying , if not maybe i can elaborate further later.
thank you ,
Preeta

Hi,
Try with these FM's:
SAP_WAPI_FORWARD_WORKITEM
And for information: SAP_WAPI_FORWARDING_INFO_GET
PS: Status change from COMPLETED to READY is not allowed/possible
Regards,

Encore Remote Preview Buttons Not Working in Preview Mode

I have had this annoying problem on several ocassions and it's back again. I have never been able to figure out what causes it.
When in the prview mode to test the DVD compliation to see if the remote buttons will change between the menu buttons I created, I am unable to select any of the three buttons in the menu with the remote selector at the bottom of the preview window. I am able to select them with a mouse click but not with the remote buttons meaning that when the DVD is built, a real reomte will not change the titles that are associated with each button.
What can be causing this to keep happening. The compilation in Encore is a linked composition form Premier CS4--both Encore and Premier are CS4.
Please help please.
Thanks!!

I know this post is old, but I found it as I am having the same issue. Encore CS5. I have a menu that I have 9 buttons layed out, near the bottom, and the previous/next and main menu buttons are near the top. The 9 on the bottom are each numbers 1-9. However when I preview it starts at 1 then pressing right arrow does not jump to number 2 but #11, the "next" arrow button on top of page.
I will post a screen shot with buttons 1-9 hilighted, showing they are not touching, and the button routing turned on.
Any thoughts?
I guess I will make a new menu and see if I just need to reuild it.

ALV Toolbar on modal dialog screen and toolbar on text edit control

Hello,
I have created one container and producing ALV Grid output on a modal dialog screen. i do not want the ALV Toolbar to appear on this screen. How can I hide it ?
ALso I need to hide some buttons on a Text edit control. How can I hide them ?
Thanks and rgds,
Anand

Hi,
To exclude some Toolbar functions, please do the below
DATA:
lt_toolbar_excl TYPE ui_functions.
Exclude Some toolbar functions
    APPEND cl_gui_alv_grid=>mc_fc_detail         TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_info           TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_graph          TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_view_crystal   TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_delete_row TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_copy_row   TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_undo       TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_check          TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_refresh        TO lt_toolbar_excl.
And Pass the lt_toolbar_excl to the ALV object
Display
CALL METHOD go_alv_grid->set_table_for_first_display
    EXPORTING
      is_variant           = ls_variant
      is_layout            = ls_alv_lay
      is_print             = ls_print
      i_save               = 'A'
      it_toolbar_excluding = lt_toolbar_excl
    CHANGING
      it_sort              = lt_sort
      it_outtab            = gt_user[]
      it_fieldcatalog      = lt_alv_cat.
Hope this helps you.
Thanks,
Ruthra

BDC for Modal dialog screen

Hello,
I'm creating a bdc for create customer transaction (FD01). The problem I'm currently having is on maintaining the "other communication" details for the customer. The requirement I have is to maintain only the communication type "URI". But I can't find the correct program and screen number for this modal dialog. anyone have an idea?
Thanks?
MP

Hi, thanks for all the reply. However, everything has been tried. The modal screen dialog I was refering at does not contain any program or screen details when I use F1. This screen does not appear in SHDB when doing the recording. SAPLSLVC_FULLSCREEN/0700 is not the screen I'm refering at.
When you click on the "Other Communication", there will appear the screen I'm refering at having the list of all other communication type you need to maintain (Fax, Telephone, E-mail, URI). This screen is somehow similar the way serach help functions. I'm basically concern on URI. So what I need to do is place the cursor on URI and click on the check button or double cliking URI is ok. This is the part missing on my bdc, choosing the URI in the modal dialog screen. Upon debugging, it seems that a Function is responsible in displaying the screen.Any idea?
Message was edited by: Marlon Pita

Is it necessery to push the Print Preview Button first so as to print Adobe

Hi All ,
I have a simple question.
I created a adobe print form.
I want to print this form and we can see the pop up window where i have the choice Print and Print Preview.
I want just to push the button Print and to have my pdf form printed.
The question is.
Do i need for adobe print form to Preview first the form so as to print it than to some device?
I know that with the print button i send the xml form to ADS which convert it to pdf with the XDC file and than to the spooler where the Part pdf is printing.
I will appreciate any help.
Thank you ,
Ari

Hi Dezso ,
Thank you for your answer.
Installing the XDC and the devices the way we can print the form is just pushing the button print in the pop up window?
Not first pushing the Print Preview button right?
Also we can suppress the pop up window setting the fp_outputparams values ?
In this way running the program i can print my form automatically?
fp_outputparams-preview = 'X'.
fp_outputparams-connection = 'ADS'.
*fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
*ls_outputparams-preview = ' '. " launch print preview
*fp_outputparams-dest = 'ZPDF'.
*ls_outputparams-getpdf = 'X'.
Thank you very much for you help.
Ari

Overlay Creator looks different and there's no preview button

When I'm working at home I have Lion OS and the overlay creator has more of a vertical layout and the preview button is prominently placed on the bottom of the palette. When I'm at work the OS is Snow Leopard and the overlay creator is more horizontal and there is no preview button (see screen shot)
When I first saw this I thought the difference was do to the OS but where's the preview. The preview under Interactive doesn't appear to work for overlays...

That is very, very old version of the overlay creator from the prerelease program. Time to update your tools.
Bob

Active mode multiple selection in dialog screen

in my dialog screen i had multiple selection option button by using the below function module.
CALL FUNCTION 'K_CMPERS_MULTIPLE_SELECTION'
EXPORTING
    P_FIELDTYPE         = 'R'
    P_FIELDNAME         = 'MATNR'
    P_TABLENAME         = 'MARA'
TABLES
    PT_PARM             = HMAT.
its working fine.
but when i enter data into multiple selection it does not changes to active mode ( green color).
can u pls tell me how to change it into active mode when data is there

Hi Banu,
The icon will not change automatically. You need to write code in PBO and change the icon of your push button accordingly.
Please refer to the document below for how to change icon of push button in module pool:
[http://wiki.sdn.sap.com/wiki/display/sandbox/ChangeanIconofaButtonDynamicallyInModulePool|http://wiki.sdn.sap.com/wiki/display/sandbox/ChangeanIconofaButtonDynamicallyInModulePool]
Cheers,

CS6 Preview Button?

I had previously been using CS3 and recently upgraded to CS6. When doing color processing I no longer find the on/off preview button so that when adjusting color balance, for example, I do not see a toggle switch (preview) to see the effect on and off. What am I missing here?

Thank you all very much. Clicking on the eye back and forth gives me what I need. I should have remembered that but I got focused on the plette which, you will see (if I can capture the screen shot properly) shows that there is no preview button on my CS6 palette.

No preview or preview button appears when I try to print a web page, as it does for any other file. How can I arrange for preview?

n the dialog box that appears when I try to print any web page, there is neither a preview nor a preview button, (although there is a preview if I open the web item as a pdf file, but that takes an extra step. A preview appears when I print any other file on my computer (a Macbook). Is there a setup procedure that will give a preview when printing one or several web pages?

The Print button in the "3-bar" Firefox menu button drop-down list opens the Print Preview window.
You can click the Print button in the Print Preview window or use the Print item in the File menu (File > Print) or use the Ctrl+P shortcut to have access to the print selection item and other print setup options.
* Tap the Alt key or press F10 to show the Menu bar.
* Use "View > Toolbars > [X] Menu Bar" to have the menu bar visible permanently.
*Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/

Hide/Preview button for Notification Search Iview

I'm working on a Portal Appllication called NRX. It's used as Interface for SAP Plant Maintenance
There is an iview to search notifications in the R3
When I log in I can see two buttons in the upper right corner. Hide and Show Preview button
However, sometimes I log in and I can't see these buttons.
We believe this is a node configuration issue.
Can someone help me?

Hi Srini,
Thanks for the Immediate Response, I reviwed the Maetalink Note which you suggested, it was stated as:
Starting from ATG_PG.H.Rollup 4, an enhancement has been made to the Notification Details screen.
When the user viewing the notification has been granted the Workflow Administrator privilege (through the WF_ADMIN_ROLE preference), then the Reassign button will always be visible, even when the message attribute #HIDE_REASSIGN is set to Y.
This allows Administrators to reassign any notification when necessary in exception cases.
But in my case, the user do not have the Workflow Administrator privilege. He was not assigned with any workflow Admin Resps. Is there anything I am missing to check the WF_ADMIN_ROLE preference for a particular user?
Regards,
Sridhar

Dialog Screen - Invalid field format (screen error)

Dear all,
I have developed a modal dialog screen and succesfully invoked it with CALL SCREEN command in the main screen. Unfortunately, it always returns "Invalid field format (screen error)" when clicking on the dialog's GUI control such as button or radio button. Anyone encountered this before??
Regards,
KK

Hi KK,
Just make sure that the fields take on the screen are also declared in the top module of your program.
And also match their data-types and size i.e., declared in top module and on the screen in their respective attributes.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Dialog Screen on Preview Button of ME21N

Similar Messages

Maybe you are looking for