Diamond memory problem

Hi All
First post, and it's a problem. I have had (and still use) 3 MSI boards and have until now found them to be totally reliable. However I now have a problem, that mat or may not be related to the mii heat wave we are experiencing here in the North West of England. Basically I am in the process of oc'ing my system but I was getting a few blue screens so I thought I would add a few volts to my memory. I uppped it to 1.4 and the system died, so I cleared the bios and rebooted.....nothing. After mush tooing and fro'ing I surmised that the system would boot (intermittently) in single channel at 2T at 333MHZ (see specs) about half an hour ago it died again and will no longer boot. So if anyone has had any similar problems, any advice will be greatly appreciated. System Specs below
MSi K8n Diamond
AMD FX60 (overclocked to 3.2)
2 (2x1) Gb Corsair XMS
2x 7800 GTX (SLi) No OC
Creative XFi Platinum
Vapochill XEII case (Phase Change Cooling)
Various hard disks Maxtor & Samsung
HP DvD 840I
Thanks in advance

Hi Hans
Sorry for posting in worng section
Psu is Seasonic S12 600
85% efficiency on the 12V rail comes very highly rated.
System worked fine for a while with the odd blue screen, i resolved this down to my oc on the 7800's (up to 490/510 core and 1.31 on the memory) they are currently rinning at stock on a water cooled rig (mc50 pump (same as swiftech kit) 2 maze 4 gpus and a pa120.1 rad pumping out the back of the compressor compartment)
All other specs are normal other than the oc on the cpu.

Similar Messages

K8N Diamond Memory Problem

Hi Everbody,
I have a computer with these configurations;
but I have a problem. I'm installed four 1Gb DDR 400 Kingston (KHX3200K2/2G). But my computer show 3.4 Gb memory on the bios and 3328 Mb on the windows. What is problem? Where is it problem? Can you help me?. Thanks....
Computer:
Computer Type ACPI x64 Computer
Operating System Microsoft Windows Vista Ultimate
OS Service Pack Service Pack 1
Internet Explorer 7.0.6001.18000
DirectX DirectX 10.0
Computer Name TUGAY-PC
User Name Tugay
Logon Domain Tugay-PC
Date / Time 2008-10-13 / 23:31
Motherboard:
CPU Type DualCore AMD Opteron 170, 2000 MHz (10 x 200)
Motherboard Name MSI K8N Diamond (MS-7100) (3 PCI, 2 PCI-E x16, 4 DDR DIMM, Audio, Dual Gigabit LAN, IEEE-1394)
Motherboard Chipset nVIDIA nForce4 SLI, AMD Hammer
System Memory 3328 MB (PC3200 DDR SDRAM)
DIMM1: Kingston K 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Kingston K 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM3: Kingston K 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM4: Kingston K 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz) BIOS Type Award (02/28/07)
Display:
Video Adapter NVIDIA GeForce 7300 GS (256 MB)
Video Adapter NVIDIA GeForce 7300 GS (256 MB)
3D Accelerator nVIDIA GeForce 7300 GS
Monitor Samsung SyncMaster 199BW/940BW/MagicSyncMaster CX915BW (Analog) [19" LCD] (HVEL957143)
Monitor Samsung SyncMaster 199BW/940BW/MagicSyncMaster CX915BW (Digital) [19" LCD] (HVEL957143)
Multimedia:
Audio Adapter Creative SB Live! 24-bit (CA0106) Integrated Audio Processor on MSI motherboard

Look for "S/W memory hole Remapping" in BIOS and Enable it in "DRAM Configuration" in "Cell Menu"

P7N Diamond - Memory Problem ???

Hi all,
I have recently purchased a new computer and have been having trouble with it since day 1.
My current RAM (see specs bellow) is showing incorrect readings. My tech friend is thinking that I have gotten ripped off...
I downloaded Nvidia's nTune and
nTune seems to be reading the Memory Modules as:
2 part numbers as KTC1G-UDIMM
the other 2 Part numbers as KHX8500D2/1GN
In this order:
0 dimm - KTC1G-UDIMM
1 dimm - KHX8500D2/1GN
2 dimm - KTC1G-UDIMM
3 dimm - KHX8500D2/1GN
>>> [EDIT]: Also I'm only able to stably or somewhat stabley runn it at 800... and if I try 1066 it doesnt load my Win XP and tryed the CPU/FSB down at 1066.. while that is ok... when it comes to video or HD video is starts to play up giving me black screens and audio hiccups and a few click of a mouse and boom... time to hit reset.
Is this a Bios issue that can be updated or has the guy given me to older ram sticks??
I play Age of Conan... I know that the game has some issues... but My issue is that the computer just Restarts its self... Straight off and the continues to reboot.
There has not been reports about this regarding AoC.
My Specs:
Intel QX9650
MSI P7N Diamond
2 Kingston KHX8500D2k2/2G KIT's (4gigs)
Gigabyte 9800gx2
WD Raptor 72GB
Segate 1TB

Hi again,
Well this is deffinetly UnMatched RAM....
I ran CPUZ and got founf that the 2 different pairs of RAM have different Manufacturing Dates.. not sure if thats something to go by though i guess it would be since it is in WEEK not Days lol ...but the actual "Part Numbers" show what the deal is:
Memory SPD
DIMM #1
General
Memory type      DDR2
Module format      Regular UDIMM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         1024 MBytes
Max bandwidth      PC2-6400 (400 MHz)
Part number      KTC1G-UDIMM
Serial number      A8249D51
Manufacturing date   Week 10/Year 08
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Nominal Voltage      1.80 Volts
EPP         no
XMP         no
Timings table
Frequency (MHz)      200   266   400
CAS#         3.0   4.0   5.0
RAS# to CAS# delay   3   4   5
RAS# Precharge      3   4   5
TRAS         9   12   18
TRC         12   16   23
DIMM #2
General
Memory type      DDR2
Module format      Regular UDIMM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         1024 MBytes
Max bandwidth      PC2-6400 (400 MHz)
Part number      KHX8500D2/1GN
Serial number      8C31F302
Manufacturing date   Week 11/Year 08
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Nominal Voltage      1.80 Volts
EPP         yes (3 profiles)
XMP         no
Timings table
Frequency (MHz)      200   266   400
CAS#         3.0   4.0   5.0
RAS# to CAS# delay   3   4   5
RAS# Precharge      3   4   5
TRAS         9   12   18
TRC         12   16   23
EPP profile 1 (abbreviated)
Voltage level      2.200 Volts
Address Command Rate   2T
Cycle time      1.875 ns (533.3 MHz)
tCL         5.0 clocks
tRCD         6 clocks (9.50 ns)
tRP         6 clocks (9.50 ns)
tRAS         15 clocks (28.00 ns)
EPP profile 2 (abbreviated)
Voltage level      2.200 Volts
Address Command Rate   2T
Cycle time      2.500 ns (400.0 MHz)
tCL         4.0 clocks
tRCD         4 clocks (10.00 ns)
tRP         4 clocks (10.00 ns)
tRAS         13 clocks (32.00 ns)
EPP profile 3 (abbreviated)
Voltage level      2.200 Volts
Address Command Rate   2T
Cycle time      3.000 ns (333.3 MHz)
tCL         3.0 clocks
tRCD         3 clocks (9.00 ns)
tRP         3 clocks (9.00 ns)
tRAS         10 clocks (30.00 ns)
DIMM #3
General
Memory type      DDR2
Module format      Regular UDIMM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         1024 MBytes
Max bandwidth      PC2-6400 (400 MHz)
Part number      KTC1G-UDIMM
Serial number      AA249C51
Manufacturing date   Week 10/Year 08
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Nominal Voltage      1.80 Volts
EPP         no
XMP         no
Timings table
Frequency (MHz)      200   266   400
CAS#         3.0   4.0   5.0
RAS# to CAS# delay   3   4   5
RAS# Precharge      3   4   5
TRAS         9   12   18
TRC         12   16   23
DIMM #4
General
Memory type      DDR2
Module format      Regular UDIMM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         1024 MBytes
Max bandwidth      PC2-6400 (400 MHz)
Part number      KHX8500D2/1GN
Serial number      8D31BC02
Manufacturing date   Week 11/Year 08
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Nominal Voltage      1.80 Volts
EPP         yes (3 profiles)
XMP         no
Timings table
Frequency (MHz)      200   266   400
CAS#         3.0   4.0   5.0
RAS# to CAS# delay   3   4   5
RAS# Precharge      3   4   5
TRAS         9   12   18
TRC         12   16   23
EPP profile 1 (abbreviated)
Voltage level      2.200 Volts
Address Command Rate   2T
Cycle time      1.875 ns (533.3 MHz)
tCL         5.0 clocks
tRCD         6 clocks (9.50 ns)
tRP         6 clocks (9.50 ns)
tRAS         15 clocks (28.00 ns)
EPP profile 2 (abbreviated)
Voltage level      2.200 Volts
Address Command Rate   2T
Cycle time      2.500 ns (400.0 MHz)
tCL         4.0 clocks
tRCD         4 clocks (10.00 ns)
tRP         4 clocks (10.00 ns)
tRAS         13 clocks (32.00 ns)
EPP profile 3 (abbreviated)
Voltage level      2.200 Volts
Address Command Rate   2T
Cycle time      3.000 ns (333.3 MHz)
tCL         3.0 clocks
tRCD         3 clocks (9.00 ns)
tRP         3 clocks (9.00 ns)
tRAS         10 clocks (30.00 ns)

MOVED: P7N Diamond - Memory Problem ???

This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
https://forum-en.msi.com/index.php?topic=118059.0

Absolutely nothing helps. NOTHING. I have tried every possible thing you could expect normal user to try. This mainboard is crap. I got this to almost work with some (very expensive) Kingston memory sticks which were mentioned somewhere with this board, it only crashes few times a day now! Every component is tested at reseller AND replaced with some other brand. No help.
BFG GeForce 9800GTX OCX 512MB
Intel Core 2 Quad Q9300 2.5GHz boxed 45nm (Socket775)
MSI P7N Diamond LGA 775 NVIDIA nForce 780i SLI (24pin)
Corsair Dominator XMS2-8500 4GB Kit (1066MHz)
Nexus NX-8050 500W 80 PLUS

MOVED: Diamond memory problem

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=98701.0

Hi Hans
Sorry for posting in worng section
Psu is Seasonic S12 600
85% efficiency on the 12V rail comes very highly rated.
System worked fine for a while with the odd blue screen, i resolved this down to my oc on the 7800's (up to 490/510 core and 1.31 on the memory) they are currently rinning at stock on a water cooled rig (mc50 pump (same as swiftech kit) 2 maze 4 gpus and a pa120.1 rad pumping out the back of the compressor compartment)
All other specs are normal other than the oc on the cpu.

Computer freeze / Memory problem?

Hi,
I assembled my new PC approx. 1 month ago (full spec attached at the bottom of the message).
Since then I'm having a lot of freezes (freeze, not BSOD). I tried using several OS versions with no luck, so I though it's a memory problem.
Testing the memory, each dimm by itself, with memtest86+ succeeded. I even tried to check each of the memory banks and the test still succeeded.
When testing with more than one dimm (both with single-channel and dual-channel configuration) I'm getting freezes during the check.
What could be the problem?
Thanks!
The full spec:
Case: Thermaltake Armor+ ESA VH6001BWS
PSU: Thermaltake ESA 850W
CPU: Intel Core 2 Extreme QX9650
CPU Cooler: Thermaltake BigWater 780e ESA
Motherboard: MSI P7N2 Diamond (Bios version is 1.1, this also occurs at 1.0)
Memory: 4 x OCZ DDR3 PC3-12800 Platinum 2GB (OCZ3P16004GK), 8GB Total
Sound card: MSI X-Fi Xtreme Audio (the one that is bundled with the P7N2)
GPU: MSI GeForce 280 GTX OC
OS: Windows Vista Ultimate with SP1 - x64 edition
The system is not overclocked at all, All the bios settings are set to default.

Quote from: John_Doe on 18-January-09, 02:38:37
OK, That's what I did:
Changed back the clock speed to auto (it was auto set back to 1333MHz), Changed the voltage of the memory and the NB back to "Auto".
Then I changed the memory to work as 9-9-9-24 and tested it with 2 dimms in a dual-channel configuration.
So far, It's looks like it's working and working well (2 passes completed successfully).
Quote from: John_Doe on 18-January-09, 02:38:37
Assuming that the tests will go smooth, I would like to ask if this is a recommended configuration to stay with (1333MHz, voltages at "Auto", memory set to 9-9-9-24)?
Running those dimms not at overclocked & overvoltaged (and even in "lower speed" then it should) should prevent them from having short lifetime, Am I right?
Yes, because their DDR3 chips have been designed to work at 1333MHz with 9-9-9-24.
"Have been tested to work at 1600" is another fish in another (OCZ) ocean.
good luck

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Memory Problems with Adobe PDF iFilter for 64-bit

In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64). When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM. One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep). But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans. So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle. Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get. I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems. Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

Memory problems with PreparedStatements

Driver: 9.0.1 JDBC Thin
I am having memory problems using "PreparedStatement" via jdbc.
After profiling our application, we found that a large number oracle.jdbc.ttc7.TTCItem objects were being created, but not released, even though we were "closing" the ResultSets of a prepared statements.
Tracing through the application, it appears that most of these TTCItem objects are created when the statement is executed (not when prepared), therefore I would have assumed that they would be released when the ResultSet is close, but this does not seem to be the case.
We tend to have a large number of PreparedStatement objects in use (over 100, most with closed ResultSets) and find that our application is using huge amounts of memory when compared to using the same code, but closing the PreparedStatement at the same time as closing the ResultSet.
Has anyone else found similar problems? If so, does anyone have a work-around or know if this is something that Oracle is looking at fixing?
Thanks
Bruce Crosgrove

From your mail, it is not very clear:
a) whether your session is an HTTPSession or an application defined
session.
b) What is meant by saying: JSP/Servlet is growing.
However, some pointers:
a) Are there any timeouts associated with session.
b) Try to profile your code to see what is causing the memory leak.
c) Are there references to stale data in your application code.
Marilla Bax wrote:
hi,
we have some memory - problems with the WebLogic Application Server
4.5.1 on Sun Solaris
In our Customer Projects we are working with EJB's. for each customer
transaction we create a session to the weblogic application server.
now there are some urgent problems with the java process on the server.
for each session there were allocated 200 - 500 kb memory, within a day
the JSP process on our server is growing for each session and don't
reallocate the reserved memory for the old session. as a work around we
now restart the server every night.
How can we solve this problem ?? Is it a problem with the operating
system or the application server or the EJB's ?? Do you have problems
like this before ?
greetings from germany,

Dual Channel memory problems on Neo 875P

I am having considerable trouble getting the NEO 875P to work with dual channel DDR400 DIMMs. I have two Kingston KVR400X64C25 DDR400 256MB memory modules, each of which works correctly by itself. However, once I move one
of the modules to channel B, I cannot boot my operating system (currently Windows XP.) The problem also occurs in Windows 2000, which I also have on the system. I receive blue screen errors that indicate paging/memory problems. I have upgraded my BIOS to the latest version (1.3)* in the hope that it would solve my problems, but it has not. The POST screen detects that there is 512MB of memory working in Dual Channel mode, but even when it does get through the O/S booting process (rarely), it crashes within minutes. Putting just one of the chips in makes the system perfectly stable. If anyone has any information, please let me know!
Thanks,
Jim Keller
http://www.centerfuse.net
* My board was dead after trying to flash the 1.3 BIOS, but after about 10 attempts of using CTRL+HOME method to recover the BIOS, it finally worked with version 1.0. I then re-flashed with 1.3, and it rebooted fine. Are there any updates about all of the problems with v1.3 ?

>I can only answer based on what I've read on this forum
I figured as much, I was just wondering if you knew whether MSI themselves frequents the forums or answers emails sufficiently.
I've had an interesting development though. I stumbled upon Tom's Hardware Guide's article about 875P motherboards at http://www17.tomshardware.com/motherboard/20030519/i875p-01.html
They mentioned that they needed to increase the memory voltage from 2.5 to 2.6 in the BIOS to get some memory modules to work. I did this, and for the first time, I am running in Dual channel DDR mode. However, the article also mentions that "the system does not run completely stably", so I guess I'll have to wait and see if it crashes again. However, I'm far enough beyond the XP splash screen to post this message, so I guess we're getting somewhere!
-Jim Keller
http://www.centerfuse.net

MS-6380 Memory Problem

I have a MS-6380E with the latest BIOS and chipset drivers. Athlon 1.5 Ghz processor, Geo4 Ti series card with 64MB ram and latest drivers and an SBLive Platinum 5.1 card, with the latest drivers. Windows XP Pro is the operating system. The system has 2 PC2100 256MB sticks of DDR ram on the board. This past weekend I tried to install a 3rd chip, PC2100 512MB chip to bring the system up to a Gig of ram. The system would reboot immediatly upon logging into Windows. I took the memory back and exchanged it for another. Installed it with similar results. I tried all three slots with the new memory and the two existing. No, I didn't try the new memory by itself. I finally go it to appear stable for a little bit but I also play Dark Age of Camelot and the latest symptoms were that the system would kick me back to the desktop as soon as I got to the initial "connecting" screen in Dark Age. I also had other odd behaviour with the additional ram installed like my modem taking longer to validate my connection. When I went back to the pre-existing configuration 512MB total, everything would stabilize. The DDR brand was Centron, I know it's not the same manufacturor as my other two sticks but I don't recall the brand on those. Also, just in case you needed to know Dark Age of Camelot is an MMORPG. I checked their tech section and nothing on this problem and their game. I've since returned the memory and have resigned to maxing out at 512MB tho the system specs say I can go to 3GB. I really like this board but am frustrated at the memory problem.

http://www.msi.com.tw/program/service/forum/search.php?boardid=
6380 covers a hell of a lot of boards
getting same make and model of ram is generally advisable to

Nokia C5-03 Low memory problems ( Other Files )

Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.

Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul

Memory problem with jdk/jre 1.1.8

My name is BERGMANN Yannick.
I'm working for IRM in Li?ge and we developped an application (user interface for an industrial measurement system) in Java (JDK/JRE version : 1.1.8).
We have a big memory problem with this application :
- This user interface is running on a WINDOWS NT PC with 128MB.
- This is the command to lanch our application :
C:\Program Files\JavaSoft\JRE\1.1\bin\jrew.exe" -ms32m -mx32m -cp "\Program Files\HMI\HMI.zip;\Velocis\Add_On\Jdbc\raima.jar;\Program Files\Swing-1.1.1\swingall.jar" be.irm.hmi.kernel.HMI -t15 -d"Velocis rdstcp" -newdb -mf1m -mr20
- When our application is running, everything seems to be OK in memory for it. The garbage collector seems to work properly and our application has always at least 5MB free memory (We use the java instruction "Runtime.getRuntime().freeMemory()" to know this).
- But when we look in the "Windows NT task manager" for the "jrew" application, the memory increases ALWAYS.
- After 5 days our application is completely frozen and blocked ...???
- here is a memory map of our Windows NT PC :
     "jre.exe"     "commit total"     "commit limit"     "commit peak"     "physical total"     "physical available"     "physical file cache"
Monday     92264     109256     194944     109424     130484     19492     6216
Thuesday     106196     123072     194944     123348     130484     6072     5840
Wednesday     110836     132288     194944     132416     130484     4408     5140
Thursday     108200     144980     194944     145140     130484     4888     5148
Friday     109440     158319     194944     161334     130484     4911     4992
Monday     111600     209060     228548     209148     130484     5184     3484
Have you any idea of what is happening with "jrew" in memory ?
We have had this problem for six month and we are totaly out of idea.
If you can give us any idea, we'll appreciate a lot.
Thanks in advance,
BERGMANN Yannick
IRM SA - Software Engineer
Tel. (32)4/239.90.10
Tel. (32)4/239.90.74 (direct)
Fax (32)4/263.40.97
E-mail [email protected]

We had a memory problem with a swing applet in our company. The major reason for this was that we added new components in a JTree and removed them later again, and the components we removed were never garbage collected. This was because with these components we added different listeners, and we didn't remove the listeners after we didn't need the components anymore. After we corrected this, the components where garbage collected.
Perhaps it's a similar problem you have, or I have no idea. Check that you remove actionlisteners, mouselisteners etc from components you want to be garbage collected.
You could also test your application with OptimizeIt to see what objects you create and how many you get of them over time: http://www.vmgear.com

Memory problem with 5330 XpressMusic

Hi,
I seem to have a memory problem with my 5330, I have a 1Gb micro disc installed. My son sent me a photo from his phone, when it arrived I got a warning on the scren that 'there is not enough memory to receive messages', I have tried to delete as much as I can, a lot tells me I can't delete it, but I still get the same warning. This warnig shows up each time I switch on the phone. How can I get myself more space? Can I move things from the phone memory to the memory card?
Gerald
Message Edited by warmbells on 01-Nov-2009 06:19 PM

Are you sure you're using a 5330 XpressMusic? Or is it a 5320 XpressMusic? The former is yet to be released, AFAIK.
Assuming that you are using a 5320, try these steps:
-> Move all photos, music, videos stored in the phone memory to the memory card. You can use the built-in File Manager to accomplish this.
-> Delete all files that you would've received via bluetooth, present in your Inbox. You can save them to the mass storage.
-> Clear the browser cache.
-> Clear the Sent Items folder.
-> Make sure you don't have too many messages in your inbox.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Memory problem with ITS

Hello friends,
we are having memory problem with integrated ITS.. on one application server all memory of ITS is getting exhausted. We think few users take lots of memory and it never gets released.
I checked Note 742048 - Integrated ITS, memory requirement in application server but parameters looks ok. Sometime, when i kill a user session in SM04, some part of memory was released. However i am not able to find which sessions are taking max memory as i do not see any workproess active in SM50.
in SITSPMON :
Memory Consumption: Overview
Sessions:     27      24,710,431 Bytes       915,201 Bytes/Session       2,433,8
Templates:            14,793,306 Bytes
    Sess. & Templ.    39,503,737 Bytes     Currently available to ITS: 81.92MB o
ITS Session     memory type     Peak          Memory     Total     Current
USER 001 2463     Session Memory     1,955,757     938,597     7,574     723
USER 001 2503     Session Memory     2,008,621     965,245     9,181     930
USER 001 2523     Session Memory     2,412,477     856,925     11,327     82
thanks
ashish

and what is 2463 is line : USER(user ID) 001(Client) 2463(??) Session Memory 1,955,757 938,597 7,574 723 as this is not a work process ID.]
Basically i am trying to correlate ITS session with SM04 Session of user.

Diamond memory problem

Similar Messages

Maybe you are looking for