Diary or Jounrnal software "the best practice"

Could anybody recommend a good cataloging software, preferably with timeline functionality. I would like to record personla life and events

When you evaluate an app like this you need to bear in mind some important issues:
How easy to get data in?
How easy to get data out? (and this is a common complaint about Evernote)
How good is the search?
Some to consider:
Journler
MacJournal
ViJournal
Other places to search: MacUpdate or I Use This
Regards
TD

Similar Messages

  • What are the best practices for audit report for SharePoint 2013 farm ?

    Hello,
    I am looking for the best practices for audit reporting in SharePoint 2013 farm.Can anyone please provide me checklist/tools/guidelines on same ?
    your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    This is quite open ended question. A sharepoint farm should be well maintained as per :
    1. Microsoft's recommendations on : Topology, Hardware and Software requirements, Operational procedures and most important Capacity guidelines:
    http://technet.microsoft.com/en-us/library/ff758645(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
    2. Organisation's IT policies and procedures : Farm Configuration, Workload and monitoring
    http://technet.microsoft.com/en-us/library/ff758658(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ee748651(v=office.15).aspx
    3. Industry best practices
    I would suggest to start thinking over these lines and create a plan for your Sharepoint farm.
    You can then create powershell scripts to run these reports at certain frequency to find the changes, any deviation from the standard and health of the entire farm.
    Hope this helps!!
    I LOVE MS..... Thanks and Regards, Kshitiz (Posting is provided "AS IS" with no warranties, and confers no rights.)

  • What is the best practice to perform DB Backup on Sun Cluster using OSB

    I have a query on OSB 10.4.
    I want to configure OSB 10.4 on 2 Node Sun Cluster where the oracle database is running.
    When im performing DB backup, my DB backup job should not get failed if my node1 fails. What is the best practice to achieve this?

    Hi,
    Each Host that participates in an OSB administrative domain must also have some pre-configured way to resolve a host name to an IP address.Use DNS, NIS etc to do this.
    Specify cluster IP in OSB, so that OSB always looks for Cluster IP only instead of physical IPs of each node.
    Explanation :
    If it is 2-Node OR 4-Node, when Cluster software installed in these nodes we have to configure Cluster IP so that when one node fails Cluster IP will automatically move to the another node.
    This cluster IP we have to specify whether it is RMAN backup or Application JDBC connection. Failing to second node/another Node is the job of Cluster IP. So wherever we install cluster configuration we have to specify in all the failover places specify CLUSTER IP.
    Hope it helps..
    Thanks
    LaserSoft

  • What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

    What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

    I don't use it but it does say this in the help section...

  • What are the best practices to migrate VPN users for Inter forest mgration?

    What are the best practices to migrate VPN users for Inter forest mgration?

    It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
    Quest (QMM) has a VPN migration solution/tool.
    ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
    Santhosh Sivarajan | Houston, TX | www.sivarajan.com
    ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
    Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
    Blogs: Blogs
    Twitter: Twitter
    LinkedIn: LinkedIn
    Facebook: Facebook
    Microsoft Virtual Academy:
    Microsoft Virtual Academy
    This posting is provided AS IS with no warranties, and confers no rights.

  • What are the best practices to replace a disk in 6140 ?

    What are the best practices to replace a disk in 6140?
    Regards

    The best way is to follow CAM Service Advisor instructions.

  • What is the best practice for changing view states?

    I have a component with two Pie Charts that display
    percentages at two specific dates (think start and end values).
    But, I have three views: Start Value only, End Value only, or show
    Both. I am using a ToggleButtonBar to control the display. What is
    the best practice for changing this kind of view state? Right now
    (since this code was inherited), the view states are changed in an
    ActionScript function which sets the visible and includeInLayout
    properties on each Pie Chart based on the selectedIndex of the
    ToggleButtonBar, but, this just doesn't seem like the best way to
    do this - not very dynamic. I'd like to be able to change the state
    based on the name of the selectedItem, in case the order of the
    ToggleButtons changes, and since I am storing the name of the
    selectedItem for future reference.
    Would using States be better? If so, what would be the best
    way to implement this?
    Thanks.

    I would stick with non-states, as I have always heard that
    states are more for smaller components that need to change under
    certain conditions, like a login screen that changes if the user
    needs to register.
    That said, if the UI of what you are dealing with is not
    overly complex, and if it will not become overly complex, maybe
    states is the way to go.
    Looking at your code, I don't think you'll save much in terms
    of lines of code.

  • Is dao pattern is the best practice in projects

    let me know if dao pattern is the best followed in all almost all the
    projects though finding alternatives to it. please clarify this for me and also i do want to know the best practices of the industry in using design patterns.

    There is no 'best' pattern. It is just all abouthow
    and where to apply them. This is very true,but these are common
    design patterns used in industry for standard
    problems.
    ost of the time patterns are used not for some
    special reason but for more manageability and ease of
    change.So if you have a small application than it's
    ok but if you are working on big application which
    are needed to be maintained over a time and changes
    are frequent.Than its better to start learning about
    patterns because their will be problems which right
    now you can't see but eventually you have to take
    care of.That is either incorrect or phrased poorly.
    Patterns come about because someone analyzes different existing code bases and notes that there are similarities in the way they are built.
    It isn't that they are easier to maintain but rather that because the pattern has similarities it is easier to comprehend, understand the limitations, understand the possible related patterns, etc. That might lead to easier maintainance but it isn't the reason. The reason is because, if and only if, the requirements/architecture lead to a situation where that pattern could be properly used.

  • What is the best practice in securing deployed source files

    hi guys,
    Just yesterday, I developed a simple image cropper using ajax
    and flash. After compiling the package, I notice the
    package/installer delivers the same exact source files as in
    developed to the installed folder.
    This doesnt concern me much at first, but coming to think of
    it. This question keeps coming out of my head.
    "What is the best practice in securing deployed source
    files?"
    How do we secure application installed source files from
    being tampered. Especially, when it comes to tampering of the
    source files after it's been installed. E.g. modifying spraydata.js
    files for example can be done easily with an editor.

    Hi,
    You could compute a SHA or MD5 hash of your source files on
    first run and save these hashes to EncryptedLocalStore.
    On startup, recompute and verify. (This, of course, fails to
    address when the main app's swf / swc / html itself is
    decompiled)

  • What is the best practice for setting up warehouse inventory for oil & gas tank farm

    Hi, i want to know the best practice for setting up warehouse inventory for oil & gas tank farm. SAP has these levels for inventory management in warehouse environment: warehouse-aisle-shelf-bin. To me the bin seems to be the central location for inventory. So do i set up each oil tank as a bin location?

    Hi,
    Please refer below link:
    https://help.sap.com/saphelp_sbo900/helpdata/EN/ad/4f233a7b864c7cbe2b57ad09246adb/content.htm
    SAP Business One 9.0 Training - Feb 6, 2013 - Warehouse Bins - YouTube
    Thanks & Regards,
    Nagarajan

  • What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

    My final data table contains a two key columns unique key constraint.  I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
    (not unique) in the daily capture table).  I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns).  Currently, what I do is to select * into a #temp table from the join
    of daily capture and final data tables on these two key columns.  Then I delete the rows in the daily capture table which match the #temp table.  Then I insert the remaining rows from daily capture into the final data table. 
    Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table?  How would this look?
    What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
    Rich P

    Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
    to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for: 
    https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
    >> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
    up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
    Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key.  You need to fix this error. What ETL tool do you use? 
    >> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
    MERGE statement; Google it. And do not use temp tables. 
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • The best practice for data mart to different BW System.

    Hi All,
    Would you like to suggest me what i have to do for this case ??
    I have 2 SAP BW systems e.g. BW A & BW B.
    I wanna transfer data from info cube within BW A into info cube within BW B.
    The things that I did :
    1. 'Generate Export Data Sources' for info cube BW A.
    2. Replicate source system in BW B. In BW B, it will show datasource from info cube BW A.
    3. In SAP BW B, I create info package, then I can fetch data from SAP BW A.
    What I wanna ask are:
    1. Could I make it automatically?? Because everytime I wanna fetch data from Info Cube SAP BW A, I must run info package in SAP BW B / what's the best practice.
    2. Could RDA make it automatically ?? Automatic in my case is everytime I have new/update data in Info cube SAP BW A, I don't have to run info package in SAP BW B.
    SAP BW B will automatically fetch the data from Info Cube A.
    If yes, could you give me step-by-step how to use RDA to solve my case please..
    Really need ur guidances all .
    Thanks,
    Best regards,
    Daniel N.

    Hi Daniel,
    You can create a process chain to load your cube in BW A. SImilarly create a process chain in your BW B system to load its cube.
    Now in your system BW A you create a process chain to load your cube. After that you can run automatically the procewss chain in BW B. You can use the Remote chain option for this.
    This will trigger a chain automatically in the remote system.
    Regards,
    Mansi

  • What is the best practice to display info of completed task in process flow

    Hi all,
    I'm starting to study BPM modeling with CE7.1 EHP1. Thanks to the tutorial and example on SDN site and I can easily build my own process in NWDS and deploy to server, start it, finish it.
    I like the new runtime which can show a BPMN diagram to the processors. However, I can't find a way to let the follow up processor to review the task result completed in previous step. I'm more familiar with Guided Procedure, and know there is "Display Callable Object" which can used to show some info of a completed task when the processor/owner/admin/overseer click on a completed task.  Where is the feature in BPM ? What is the best practice to show such task information in BPM environment.
    For example, A multiple level approval process, the higher level approver need to know the comment written by the previous approver. Can he read this information from process flow ?
    I think it is very important feature for a BPM platform. In Guided Procedure, such requirement can be done with Display Callable Object + View Permission, and you just need some coding for the UI. If BPM is superior to GP, I think there must be a way to achieve this, I just do not know how ?
    Can anyone shed me some light on it ?

    Oliver,
    Thanks for your quick reply.
    Yes, Notes and Attachment CAN BE USED for the purpose. But I'm still looking for a more elegant solution.
    With the solution of using Notes/Attachment, the processor need to give input at two places : the task UI and Note/Attach , with similar or same data. It is really annoying.
    Is there any SAP BPM real-world deployment ? None of customer has the requirement ?

  • What is the best practice for APO - Demand planning implementation

    Hi,
    M client wants to implement demand planning.
    Cient has come up with one scenario like a New Customer is created in ECC, and if I use BI and then APO flow for Demand planning, user will have to wait for another day. (AS BI is always having one day delay).
    For this scenarios user is insisting on ECC and APO-DP interface.
    Will anybody suggest what should be the best practice for Demand planning.
    ECC -> Standalone BI -> Planning area (Planning is done in APO) -> Stand alone BI
    Or ECC -> APO-DP (Planning is done in APO) -> Standalone BI system
    I hope I am able to explain my scenario.
    Regards,
    Saurabh

    Any suggestions !!

  • What is the best practice for full browser video to achieve the highest quality?

    I'd like to get your thoughts on the best way to deliver full-browser (scale to the size of the browser window) video. I'm skilled in the creation of the content but learning to make the most out of Flash CS5 and would love to hear what you would suggest.
    Most of the tutorials I can find on full browser/scalable video are for earlier versions of Flash; what is the best practice today? Best resolution/format for the video?
    If there is an Adobe guide to this I'm happy to eat humble pie if someone can redirect me to it; I'm using CS5 Production Premium.
    I like the full screen video effect they have on the "Sounds of pertussis" web-site; this is exactly what I'm trying to create but I'm not sure what is the best way to approach it - any hints/tips you can offer would be great?
    Thanks in advance!

    Use the little squares over your video to mask the quality. Sounds of Pertussis is not full screen video, but rather full stage. Which is easier to work with since all the controls and other assets stay on screen. You set up your html file to allow full screen. Then bring in your video (netstream or flvPlayback component) and scale that to the full size of your stage  (since in this case it's basically the background) . I made a quickie demo here. (The video is from a cheapo SD consumer camera, so pretty poor quality to start.)
    In AS3 is would look something like
    import flash.display.Loader;
    import flash.net.URLRequest;
    import flash.display.Bitmap;
    import flash.display.BitmapData;
    import flash.ui.Mouse;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.display.StageDisplayState;
    stage.align = StageAlign.TOP_LEFT;
    stage.scaleMode = StageScaleMode.NO_SCALE;
    // determine current stage size
    var sw:int = int(stage.stageWidth);
    var sh:int = int(stage.stageHeight);
    // load video
    var nc:NetConnection = new NetConnection();
    nc.connect(null);
    var ns:NetStream = new NetStream(nc);
    var vid:Video = new Video(656, 480); // size off video
    this.addChildAt(vid, 0);
    vid.attachNetStream(ns);
    //path to your video_file
    ns.play("content/GS.f4v"); 
    var netClient:Object = new Object();
    ns.client = netClient;
    // add listener for resizing of the stage so we can scale our assets
    stage.addEventListener(Event.RESIZE, resizeHandler);
    stage.dispatchEvent(new Event(Event.RESIZE));
    function resizeHandler(e:Event = null):void
    // determine current stage size
        var sw:int = stage.stageWidth;
        var sh:int = stage.stageHeight;
    // scale video size depending on stage size
        vid.width = sw;
        vid.height = sh;
    // Don't scale video smaller than certain size
        if (vid.height < 480)
        vid.height = 480;
        if (vid.width < 656)
        vid.width = 656;
    // choose the smaller scale property (x or y) and match the other to it so the size is proportional;
        (vid.scaleX > vid.scaleY) ? vid.scaleY = vid.scaleX : vid.scaleX = vid.scaleY;
    // add event listener for full screen button
    fullScreenStage_mc.buttonMode = true;
    fullScreenStage_mc.mouseChildren = false;
    fullScreenStage_mc.addEventListener(MouseEvent.CLICK, goFullStage, false, 0, true);
    function goFullStage(event:MouseEvent):void
        //vid.fullScreenTakeOver = false; // keeps flvPlayer component from becoming full screen if you use it instead  
        if (stage.displayState == StageDisplayState.NORMAL)
            stage.displayState=StageDisplayState.FULL_SCREEN;
        else
            stage.displayState=StageDisplayState.NORMAL;

Maybe you are looking for