Dick Utility taking so...oooo long.

When I try and use the disk utility, both "verify permissions" and "repair permissions", they seem to take forever. I have read on this forum, that it gets quicker after time, but this does not seem to be happening. I have all recent software updates. After repair permissions, I get the following:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Any ideas?

A similar thread is posted at:
http://discussions.apple.com/thread.jspa?threadID=1272297&tstart=75
bottom line - nothing to get too excited about ...

Similar Messages

Calculations on new server is taking a very long time

Hello,
We are upgrading from a 9.2 to 9.3 system. The 9.3 system is on completely different servers than the 9.2 system. We have migrated a couple of applications and the calcs on the 9.3 system are taking a very long time. For instance a calc that we ran on the 9.2 system that used to take 1 hour now takes 7. Also, on a different application a calc that used to take 15 minutes now takes an hour. The applications that we put on 9.3 are identical to the application on 9.2 (we used the migration utility). Additionally, I have ensured that the essbase.cfg files have the same cache settings. What else can we do to get the performance on the 9.3 system to be equal to if not better than the 9.2 system?
I appreciate any help.

I would recommend that you run perfmon.exe (if using Windows) to look at the CPU and Disk I/O utilization.
On a well tuned system, you will see a "toggling" of max CPU and max I/O as each keeps the other busy and takes relatively small breaks in activity.
My suspicion is that the I/O is the bottleneck on the new system, maybe it's using an external array that is shared, perhaps? If this is the case, the CPU utilization will be relatively low and the I/O will be relatively high (if you are familiar with the concept of duty cycle, the I/O duty cycle will be well more than 50% if it's the bottleneck, much less than 50% if the CPU is the bottleneck, and about even if they are well balanced).
The other major possibility (aside from weak disk configurations) are that a raid drive is in fault mode and the controller is rebuilding the set. The other possibilities are more like fringe cases compared to these two.

Discoverer report is taking a very long time

Hi All,
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.
Regards
Kumar

Please post the details of the application release, database version and OS along with the discoverer version.
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Long+AND+Time&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Performance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Messages are taking a very long time to send.

Hello, I'm currently having a big problem with messages taking a very long time to actually send. The spinning wheel will stay there for hours. It only happens in one or two skype groups at a time where I can send messages normally in other groups. Does anyone have any idea how I can fix this?

I have been having this problem for the last 4 releases. I have had some take up to 8 hours to send before. I can usually fix it by signing out then restarting skype. Just restarting skype doesn't work, nor does just signing in again.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and says 12 hours remaining. The text "Time remaining" flickers.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank you

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

Is there any way to connect time capsule to a MacBook Pro directly via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...)?

Perhaps via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...? I want to use TimeCapsule as back-up for an archive which is curently stored on a 2 TB WESC HD.

No, you cannot backup via direct usb connection..
But gigabit ethernet is much faster anyway.. are you connected directly by ethernet?
Is the drive you are backing up from plugged into the TC? That will slow it down something chronic.. plug that drive in by its fastest connection method.. WESC sorry I have no idea. If ethernet use that.. otherwise USB direct to the computer.. always think what way the files come and go.. but since you are copying from the computer everything has to go that way.. it makes things slower if they go over the same cable.. if you catch the drift.

Installing OS X on a new hard drive taking way too long?

I switched out my old 250 GB hard drive that shipped with my MacBook Pro for a new 640 GB WesternDigit drive. I'm trying to use a Mavericks installer USB to install on my newly formatted hard drive, but it's taking way too long - I mean, I left it going overnight (about 7.5 hours), and when I came down, it wasn't even half done. Is there anything I can do here? I'd like to use my laptop. Thank you very much for any suggestions.

Do you have a internet connection? Even with a USB installer that if good and functioning properly you need an internet connection to Authenticate the install with your Apple ID.
If your old drive is still functioning you can connect it to your Mac with a SATA to USB adapter and use the Recovery HD on that original drive to reinstall Mavericks on the new drive.
If the drive is no longer functioning and you have no way of getting to the Apple internet download for Mavericks then you will need to start with an install of the original version of OS X that came on your Mac when new then update and or upgrade to Snow Leopard 10.6.8 and then use the Mac App Store to reinstall Mavericks. There is not other way to do this. So save yourself some time and trouble and start fresh.
If your original drive is still functioning and it had Mavericks installed on it you can also CLONE that drive to the new one once you connect it to your mac with some type of SATA to USB adapter or enclosure.
If the Mavericks USB installer you have was made from a Mac that came with Mavericks pre-installed on it that will not work on your Mac.

How to tune the query..."sum" operation is taking too much long time...

how to reduce the execution time for the below query..."sum" operation is taking too much long time....
SELECT
B.DP_AVPS_STATUS,
SUM(DP_AD_CURR_BAL*D.ISIN_CLOSE_PRICE) Qty,
B.DP_NET_WORTH,
B.CMN_DP_FLAG,
B.RESTRAIN_TYPE ,
B.LETT_GENR_DATE,
E.MAX_NET_WORTH,
E.MIN_NET_WORTH
FROM DPMADV0 A, PABRNCHDTLP0 B, PABANKCCYP0 D,PADPNETWORTHDTLP0 E,
(SELECT CID_NUMB FROM CFCUSTMASTD0
WHERE SUB_TYPE NOT IN (1,2,5,6,7,28,29,30,31,40,41,48,49,50,57,83)) C
WHERE A.DP_AD_BR_NBR = B.BRNCH_NUMB
AND A.DP_AD_CCY_CDE = D.CCY_ALPHA_CODE
AND A.DP_AD_ACCT_NBR = C.CID_NUMB
AND E.DP_ACCOUNT_TYPE = B.DP_ACCOUNT_TYPE
AND SUBSTR(B.BRNCH_NUMB,1,3) like SUBSTR(:hvBrnchNumb,1,3)
AND ((B.DP_TYPE IN (2) AND B.DP_ACCOUNT_TYPE IN (10, 11)) or
(B.DP_TYPE IN (3) and B.DP_ACCOUNT_TYPE=11 ) )
AND B.DEL_FLAG = 'N'
AND B.DP_STATUS = 'A'
AND D.ISIN_STATUS = 'A'
GROUP BY B.DP_NET_WORTH,B.RESTRAIN_TYPE,B.DP_AVPS_STATUS,E.MAX_NET_WORTH,
E.MIN_NET_WORTH,B.CMN_DP_FLAG,B.LETT_GENR_DATE;

Hi,
please produce a plan with rowsource statistics (if not sure how, follow instructions in http://savvinov.com/2012/09/24/a-sqlplus-script-for-diagnosing-poor-sql-plans/) and post it using tags to preserve formatting.
Best regards,
Nikolay
P.S. I also suggest that you work on your open threads:
Handle:      946903
Status Level:      Newbie
Registered:      Jul 16, 2012
Total Posts:      11
Total Questions:      5 (5 unresolved)

TDMS Shell - DB Export from source/sender system taking a VERY long time

We're trying to build a TDMS Receiver system using the TDMS Shell technique. We've run into a situation wherein the initial DB Export from source/sender system is taking a VERY long time.
We are on ECC 6.0, running on AIX 6.1 and DB UDB v9.7. We're executing the DB export from sapinst, per instructions. Our DB export parallelizes, then the parallel processes one by one whittle away to just one remaining, and there we find out that the export is at that point single-threaded, and exporting table BSIS.
BSIS is an FI transactional data table. We're wondering why is the DB export trying to get BSIS and its contents out??? Isn't the DB export in TDMS Shell technique only supposed to get SAP essential only config and master data, and NOT transactional data?
Our BSIS table is nearly 700 GB in size by itself. That export has been running for nearly a week now, with no end in site.
What are we doing wrong? We suspect we may have missed something, but really don't think we do. We also suspect that the EXCLUSION table in the TDMS Shell technique may be the KEY to this whole thing. It's supposed to automatically exclude very large tables, but in this case, it most certainly missed out in excluding BSIS for some reason.
Anyway, we're probably going to fire up an OSS Message with SAP Support to help us address this perplexing issue. Just thought we'd throw it out there to the board to see if anyone else somewhere has run into similar circumstances and challenges. In the meantime, any feedback and/or advice would be dearly appreciated. Cheers,

Hello
Dont be bothered by the other TPL file DDLDB6_LRG.TPL, we are only concerned with DDLDB6.TPl.
Answer following questions to help me analyze the situation -
1) What is the current size of export dump
2) Since when is the exports running
3) What is the size of the source DB? Do you have huge amount of custom developments?
4) Did you try to use table splitting?
5) Do you doubt that there may be other transaction tables (like BSIS) which have been exported completely?
6) Did you update the SAP Kernel of your source system to latest version before starting the Shell package?
7) Were the DB statistics update during the shell or were they already updated before starting Shell?
8) Is your system a distributed system i.e. Central instance and Database instance are on different application servers?

Inventory aged reports are taking a very long time to run

We are using Standard delievered extractors for Inventory. We have build an Aged report and it is taking a very long time to run as more an more data is added. We put the inventory in buckets 0-30, 31-60, .... >365 days. We are aging based on a batch date the user enters. the problem is it has to go through every record to recalculate because they are non cumulative.
any ideas/suggestions on how to make this more efficient? New design?

Hi MM,
We can use snapshot of monthly data from Query and store it in DSO at month level.
We had used APD on Query and then Stored them in DSO1(WO)->DSO2(STD)->Cube->report based on Snap Shot.
From the New Query , calculate the Age.
Rgds
SVU

Notebook Taking a very long time to power off

Hi All,
My notebook (HP ENVY 17-j005tx Notebook) when shutting down only takes a couple of seconds, however it can take upto 5 minutes to power off...
At first i thought some service or program was taking a long time to shutdown, I installed Windows 8.1 SDK Performance Toolkit to try and identify a culprit; ran the command "xbootmgr -trace shutdown -traceFlags BASE+DIAG+LATENCY -noPrepReboot" and succeffully generated trace file.
I noticed the notbook had rebooted in just a few seconds..
Anyhow I proceeded to analyse the trace file using the wpa.exe program anf could not find any program or service taking much time to shutdown!!!
SO I understand now the Windows OS is shutting down nicely though the Notebook is taking a very long time to power off.
Anyone have any suggestions? I do have NVIDIA Driver 337.88 installed and did find another thread here where they suspected this driver version has not been tested by HP and after they applied it their notebook shutdown slower than usual - is this somehting maybe to look at...
I'm currently downoading sp63414.exe NVIDIA driver for my notebook - should I uninstall my current driver and apply HP's?
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer
This question was solved.
View Solution.

Thanks visruth,..
What I tried is run "msconfig" and boot into "safe mode", rebooted then shutdown, shutdown was back to normal again.
So then reran "msconfig" disabled all non-Microsoft Services, shutdown and again all powered off as normal (quickly after shutdown).
So rebooted and re-enabled all services again using "msconfig". THen disabled the following services, choosing these specifically as I'm not so sure why they should be running and some not know what they are used for...
rebooted and then shutdown and all shutdown and power off was normal...
It seems one of these services is causing the power off to take several minutes....
I suspect the bluetooth services, or the GSService, or IconMan_R, or possibly the Netgear Genie...
Funny enough I did uninstall netgear genie a few weeks ago and see for some unknown reason the Service is still there???? Hmm...
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Downloads of zip and other files are taking a very long time.

Prior to this week, downloads of zip files and other types of files were pretty fast; however, downloads are suddenly taking a very long time (i.e. 30 minutes to download an album's worth of music files). It's possible that I may have deleted something that was necessary to download files quickly, but I'm not sure. Can anyone provide suggestions on how to get my download groove back? Thanks!

Hi beaubeck,
Welcome to the Support Communities!
Resetting the modem/router and trying with an ethernet cable (wired) vs. wireless would be two good troubleshooting steps. More details are included in the article below:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Cheers,
- Judy

SAP_CCMS_MONI_BATCH_DP is taking very very long

Hi,
Can anyone help me finding the problem that I am having? the problem is, In my QA system, SAP_CCMS_MONI_BATCH_DP is taking 20 times longer than Production or Dev..... Can anyone provide the solution?
Thanks,

Hi,
Thanks for your reply. Actually that is the batch job (SAP_CCMS_MONI_BATCH_DP) which runs every hour. Same job is running in my Production & Dev, It does not take more than 10 sec to finish, but when it runs in QA, it is taking about 800 sec to finish.
Please let me know ASAP. PLEASE HELP!!!!
P.S. Could it be hardware issue? My hardware is smaller than PRD. if that is the case, is there any sap NOTE regards to that?
Thanks,

Dick Utility taking so...oooo long.

Similar Messages

Maybe you are looking for