Dicount condition multiplies with quantity in sales bom(quotation)

hi,
i am trying to create a quotation for a sales bom(va21) while i give condition type rb00(discount value) as a header condition (eg.rs 50) it multiplies with no of line items(eg. 10 line items) in the sales bom and gives and shows my discount as rs 500 rather whereas its only rs.50 for the entire document, and also for regular materials if i have 2 different line items. need help .
regards
leo

Hi Cond type:RB00 is header/item conditon
means, it can be entered manually at the header level & this amount will be copied to each line item.
if you want Rs.50 is for entire doc-
then use the group condition/header cond. - Cond type:HB00
this will solve your prob-
RB00 acting properly as desired.

Similar Messages

Sales BOM Quotation Can't be Rejected

Hi Experts,
I want to Reject a Sales Quotation which is having a Sales BOM. Even if I put the reason for Rejection on the Reason for Rejection Tab its not working. Still I am able to create a Sales Order based on the Rejected Quotation.
This issue is only for BOM normal Quotation I can Reject. Its working perfectly.
Waiting for your help.
Christine

Hi John,
Once tthe Draft Quotation was changed and resaved are you sure it was saved as a draft again ???? or was it saved as a final document. Only when you save the draft document as a final document it cannot be seen in the draft document list.
Please check the same.
Nagesh

COPA condition record with quantity scale value

Hi Expert,
My client wants to calculate value of AIrport Ground handling charge based on number of landing. My client has entered into an agreement with GH service provider where cost varies with the number of landing. for example
cost for first 100 landing at a location will be Rs 2000. then Cost of 101 to 200 is Rs 90.
So in case to total landing for a month amounts to 110 number. the expense to be booked would be
100*2000 = 200000
10* 90     =       900
Total             200900.
Can this be done   through COPA condition record feature? If yes How
Thanks in advance
Pankaj

Hi Sreedhar,
                 I am quite surprised with this requirement from the customer, Anyways this cud be acheived by the following ways...
1.The condition in the pricing procedure shpuld not be a mandatory condition.
2.In the pricing condition settings you need mainatin the entry 'D' in the manual entries field.
3.Create a condition record for the codition type maintain null values and save the cond record.
4.Create a sales order and check the results..
Lemme know if you got the solution you required.
Regards,
Girish

Sales BOM its possible edit the quantity for child items in Sales Order

Hello friends, this is my issue
I need to use a Sales BOM but the problem is that the child items in any Document marketing, such as Sales Order, the quantity for that child items it´s possible to edit independant of the father item code, and I don´t want this because allows to users to change diferent quantity for child items versus the quantity of the father item code.
Thanks in advance

Thanks Gordon yes I know even with this solution the problem is the with transaction notification is not possible determine that event to block, or if you know how or get some tip, please send me, because I analyze the requirement and I couldn´t develop.
Tks

3rd Part Dropship Scenario with Sales BOM

Hi
We have a 3rd Party Dropshipment scenario with Sales BOM with susequent Debit
Characteristics of Sales BOM
Sales BOM is created
Header Material is Valuated but non-inventorised (Accounting and costing view should exist)
Component Material is Valuated and inventorised
In Sales order, Pricing is done at the header material not at the components level
During Billing we get the COGS for the header material (cost coming from VPRS)
No VPRS exist at component level instead we have copy of VPRS just to capture the value in COPA for our reporting
Process
1. Sales Order created with Sales BOM exploded in sales order.
2. At the Item level Purchase requisition is created.
3. PR for the components is converted to PO
4. Vendor Delivers the components to Customer.
5. Statistical GR done in our system.
6. Invoicing is done in MIRO
7. We directly do the Billing. Billing is created at header level. Revenue and COGS is reported at Header level only.
We are stuck when we are doing the Subsequent Debit (can be for any unplanned cost). For Susequent Debit we are not able to report differential COPA at header level.
Normally whenever you do subsequent debit in case of 3rd party dropship for normal material, COPA document automatically attached to Billing. This is happening because of the behaviour of VPRS condition type. In our case VPRS only exists at header level and not at component level but replenishment is for components. Subsequent debit is also happening at component level. We need it to be reported at header level.
We need some solution to this.
Please advise
Regards
Neeraj
Edited by: NEERAJ BHARDWAJ on Dec 2, 2011 5:12 AM

Hi Raj,
Please clarified your requirement here, you mention that you wanted to valuated COGS at actual cost of PO? That sound more like actual costing here and what is the reason for this requirement?
Is this MTO with variant configuration?
If this is MTO with VC, Yes - we do cost Sales Order and here is the brief steps:-
Price Control S
a) Sales Order Creation - Normally when you save this will be costed and marked automatically. Note that condition type EK02 will represent the cost here
b) Run MRP based on Sales Order requirement which resulting planned orders, PR, etc
c) Convert PR-PO, Planned Order -> Production Order
d) Confirmations, GR on PO which valuated according to the SCE Costing in step a)
e) PGI will be based on the GR value on step d) which is also your SCE Costing
f) Any variance between PO and SCE need to be settle.
Thanks,
Ong Yang Lim

Sales BOM - Delivery Quantity check during post goods issue

I am working on a problem in my company. We are running ECC6.0 ehp 4. We are using standard ERLA functionality with sales bom (5) for product kits. Delivery manager has requested that we investigate a system check during delivery post goods issue. THe problem is that when shipper processes delivery, if they have to backorder they update pick and delivery quanity on the TAE item. They should also update TAQ delivery quantity, so that backorder amount is correct. If they make data entry error, backorder quantity is incorrect. The delivery manager has tried a number of attempts to re-train and correct mistakes. He is now asking that SAP issue a hard error if TAQ and TAE delivery item quantities are not the same.
I have searched on SAP Notes, Forms, and Google and do not see solution. I know that at delviery item category there is a minimum qty check for the item category. I've not found a user exit or configuration point that checks quanities. Does anyone know of out of the box solution? Or where would I put in custom user exit?
Test Case
Create Standard Order
Enter Material with Sales BOM
ITEM A     Qty 10
BOM explodes with Item categories
ITEM A     TAQ parent
ITEM B     TAE child
Create Delivery
Delivery has item categories TAQ and TAE
TAE is pickable, TAQ no pick
Process TAE
     Pick quantity of 5 items
     Change delivery quantity to 5 items
     Forget to change TAQ delivery quantity
     Pack 5 items
Post Goods Issue the delivery.
Is there are requirement/routine than can be run at time of PGI that checks TAQ delivery quantity is the same as TAE delivery quantity. If quanities are not the same, show hard error and message do not allow PGI to complete.
Thank you
Tony Romain

I tried setting that field in the sale order this morning. By defaulting it to "C"; I was able to get warning message for TAE line. I was able to post goods with TAE and TAQ, being different quantities. I need the check to determine if TAE and TAQ delivery quantity are different. Using this fields seems to be line specific. Thanks for the suggestion. I now know what that field does to the delivery.
I rewarded points.
Thanks,
Tony

How to create Deliveries with lesser quantity than sales order quantity

HI all,
I have one Scheduling Agreement SCHDMNT1 with ITEM A and Qty 100. Now i want to create 2 deliveries against this Agreement i.e DEL1 - ITEM A QTY 40 and DEL2 - ITEM A QTY 60. How to aceive this while manually entering the deliveries. What are the settings required. I also want to create such multiple deliveries against one Sales Order. What are the Configurations required to aceive this functionality.Replies will be highly appriciated.
Thanks and Regards,
Manish Khare.

Hi,
In the customer master, you have to select more than one delivery allowed.
While creating delivery with reference to your sales order, the total quantity will be copied to delivery, just the change the delivery quantity and picking quantity that u want to deliver and do the PGI.
Against reference the same SO, now the remaining qty will default in the delivery. In this way u can have multiple deliveries for the same SO.
Hope this helps.
Thanks,
Viswanath

Sales BOM: Quantity correlation for deliv.group 001

When creating a delivery for a sales BOM material assigned to delivery group, I'm getting a partial quantity.
Example is sales BOM material A requires 4 EA of subitem B. Order created for 1 EA of material A, which requires 4 EA subitem B but there are only 2 EA of B in stock. The corresponding delivery is created with a quantity of .5 for material A. I get the following message in the delivery log:
"Quantity correlation for deliv.group 001 from sls.order 0004831194 for deliv.item 000010"
I'm expecting the quantity to be 1 on the sales order. Any help is appreciated.

Hi,
I guess not. Obviously, if you don't have enough to deliver in full, then you can do one of the two; either deliver less (in this case half), or deliver none (maybe you can't deliver half because it is impossible).
Here's something from the online documentation:
Correlating Delivery Groups
Items in delivery groups can be combined in the sales order to synchronize their delivery. You will receive a warning message when creating a delivery for a sales order if all items belonging to such a group cannot be delivered. If you then create deliveries using a delivery due list, all orders whose delivery groups cannot be completely delivered will be ignored in this process. In this case, the log supplies all appropriate information. If the delivery quantity is changed or if such an item is deleted in a delivery item belonging to a delivery group, you will receive a warning message. For further information on delivery groups, refer to Combining Sales Document Items for Delivery.
In addition, the system will carry out a quantity correlation for groups of items when they are classified together by one of the following requirements:
the items belong to a common delivery group
the items have a bill of material structure
If the order structure arose from a bill of material explosion, the relations in quantity of the items is based on component quantity. If this is not the case, it is based on the relation of the order quantities. The system does not correlate items classified as having fixed quantities.
When creating deliveries, the system automatically carries out a quantity correlation. If you change a higher level itemu2019s quantity, the quantities in the dependent items will be adjusted on all levels if necessary. When you change a dependent itemu2019s quantity, the system generates a warning message. When you delete a higher level item, all subordinate items are deleted as well. When you delete a dependent item, the system generates a warning message. If the dependent item contains a quantity to correlate and is the main item of a batch split, you receive a note. You must decide manually for which batches the quantity change is to take place.
The question really is, from a business point of view, in your example what would you like to do? Deliver 1 A or none?
Regards,
Mario

ODeliveryNotes serial nbr error when using sales BoM with DI server

Hi all,
we're trying to create a delivery note with DI server for items managed by serial number and sales bom.
This is a sample xml:
<?xml version="1.0" encoding="utf-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<SessionID>F6166595-C4E0-4B5E-B44C-85CB04FAA0C9</SessionID>
</env:Header>
<env:Body>
<dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS" CommandID="ConsegnaOpen">
<BOM>
<BO>
<AdmInfo>
<Object>oDeliveryNotes</Object>
</AdmInfo>
<Documents>
<row>
<CardCode>C9999</CardCode>
</row>
</Documents>
<Document_Lines>
<row>
<ItemCode>S610STW-220</ItemCode>
<Quantity>220</Quantity>
</row>
</Document_Lines>
<SerialNumbers>
<row>
<InternalSerialNumber>AD00003</InternalSerialNumber>
<SystemSerialNumber>3</SystemSerialNumber>
<BaseLineNumber>1</BaseLineNumber>
</row>
</SerialNumbers>
</BO>
</BOM>
</dis:AddObject>
</env:Body>
</env:Envelope>
And this is the returned error: "You should use existing serial/batch numbers for this document type [(----) 29-51]"
Any idea why?
Thanks
Fabio

Hello Fabio,
I have tested your problem with DI API, and I got the same error you have.
This is an uncovered system functionality or system limitation
Report this issue to SAP Support.
My DI API COde
Dim oDN As SAPbobsCOM.Documents = oCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes)
        oDN.CardCode = "1013"
        oDN.DocDate = Date.Today()
        oDN.DocDueDate = Date.Today()
        oDN.VatDate = Date.Today()
        oDN.TaxDate = Date.Today()
        oDN.Lines.SetCurrentLine(0)
        oDN.Lines.ItemCode = "TBOM"
        oDN.Lines.WarehouseCode = "2"
        'oDN.Lines.SetCurrentLine(2)
        oDN.Lines.SerialNumbers.SetCurrentLine(0)
        oDN.Lines.SerialNumbers.ManufacturerSerialNumber = "1"
        oDN.Lines.SerialNumbers.InternalSerialNumber = "1"
        oDN.Lines.SerialNumbers.SystemSerialNumber = "1"
        oDN.SaveXML("c:TEMPDNWITHBOOM.xml")
        If oDN.Add <> 0 Then
            sbo_application.MessageBox(oCompany.GetLastErrorDescription)
        End If
Where TBOM is a sales kit, for 12 peices, components TNM item no serial number 12 peice, TSN item using serial number 1 piece.
Sales Factor 1 for TBOM is 12 piece
This sample code results the same issue you hev reported.
Edited by: János Nagy on Apr 14, 2010 4:49 PM

Using Sales BOMs to deliver goods with various tradenames ?

Hallo all,
we are currently trying to implement Sales BOMs to be able to deliver one material with different tradenames. This is necessary as CMIR would not allow us to send MSDS to the customer with the material name on the sheet.
The Sales BOM is not inventory managed and has material master item category LUMF but we are facing a couple of challenges (like packaging not working). Does anyone has been able to succesful implement a solution for tradenames like this ?
Or is there another possibility to have multiple material names for one invetory managed base material with different material numbers (for MSDS) ?
Thanks in advance for you help
Peter

Michael,
I do not see why you should not use this method if this really does the trick as you are not actually violating any rules. I have worked on a few SAP RB implementations and I exactly know how things work.
I am curious as you have decided to discontinue using Sales BOM....why did you not look at assembly BOM which fits in RB as built to order item.
Pls let me know
Suda

Delivery note with reference to sales order - 0 quantity items

Hi all,
our system allows items with quantity 0 to be created in delivery notes with reference to sales orders.
This happens when some items in a sales order are out of stock while others are availiable. The unavailable items are included in the delivery note, but have quantity 0.
The requirement is to eliminate this behavior and to create delivery notes with availiable items only.
I would be grateful for any advice how to realise this.
Best regards, Andreas

Make the necessary configuration i.e. Check quantity 0 field value should be maintained as B in the respective delivery item category using transaction 0VLP.
Regards,
GSL.

Problem with Sales BOM

Hello All,
The problem is related to Sales BOM where in the Item Category Group we maintain ERLA and the free item gets populated with the main item in the sales order with a different item category and the pricing is shown as statistical.
Now I want the system to show any error message or stop the next proceeding whenever the stock of the free item alongwith the main item or viceversa is not available or if there is any partial availability in case of free item & main item or viceversa.
Please suggest how to configure this or if any routine or user-exit need to be maintained for this.
Thanks & Regards
Priyanka Mitra

hi
check the Sale order User Exit and code your logic and make use of it

List of rejected sales order with quantity and value

Hi,
Is it possible to get the report from VA05 for the list of rejected items with value and quantity ?
Pls help
Thanks,
Vijesh

Dear Vijesh,
VA05 I believe is a very powerful report for doing analysis at order and line item level. If your rejection criterion includes a rejection reason at line item level, yes this list from VA05 can give rejected Sales Orders with Quantity and Value. See the screen shot below.
I selected a list with open dates till date, I can see Sales Order number, Sales Document Type, Item Number, Material, Rejection reason, Quantity at line item level and net price.
However, I am not sure what is the rejection criterion you use in your business and I am not sure if you use rejection reason and hence I would like to hear from you, if this explanation helps you.
Thanks
Nagaraj

Automise CS61 BOM creation with reference to Sales order

Hi Experts.
Need your help in fixing one scenario:
We have scenarion data coming from third party containing BOM data with respect to Sales order.
We are using XI/PI,
1: Do we have any idoc for CS61 master creation. (Not likely to move in bdc ....etc)
2: How to Create multilevel in that....
Please guide .. Help is appreciable.
Regards
Deepak Sodhi

Hi,
You will need to make assignment from So item to Delivery item please check if copy control is maintained at item level. Also make sure that Copy controls are maintianed for the billing document from the SO & Delivery both as this would be the next step.

Rules-based GATP with sales BOM

Hi,
with reference to the following thread which asks the same question, but although in "answered" status, actually contains no answer to the final question...
GATP Question
We are investigating the possibility of using GATP with rules-based ATP to propose a sourcing plant. The result of this is of course a subitem in the sales order.
My question is, is there any restriction to using the sales BOM with rules-based ATP? We use the sales BOM currently to insert the packaging items into the sales order. From a previous project, I have in the back of my mind that there was a restriction in this respect, and that with the subitem from the GATP result, it was not possible to explode the sales BOM.
I cannot find what I recall to be the explicit SAP-help statement in this respect. Anybody with experience in this?
Regards,
Douglas

The current situation is as follows:
We have the saleable product A in plants X and Y, with a sales BOM in each of the plants, for the packaging items B and C. When product A is entered in the sales order in, say, plant X, the sales BOM is exploded and items B and C are inserted into the sales order. ATP is done in R/3, and if there is no availability in X, then the plant can be manually changed to Y, but each of the subitems from the sales BOM must also be manually changed to Y.
Desired to be situation:
We implement GATP, with a rule to subsitute plant X with plant Y in the event that plant X has no stock. So the desired system response is: enter item A in the sales order with plant X, GATP subsitutes plant X with plant Y and generates a subitem for product A in plant Y. Now the sales BOM is exploded for the new subitem, generating the further subitems for B and C, also in plant Y.
Is this possible?

Dicount condition multiplies with quantity in sales bom(quotation)

Similar Messages

Maybe you are looking for