Dictation and Speech Freezes in Sys Preferences Window

For whatever reason, Dictation and Speech has stopped working for me.  I get a blank window and System Preferences hangs until I force quit.

Hello Ladbroke,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564?viewlocale=en_US
Starting up in Safe Mode
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
Have a nice day,
Mario

Similar Messages

  • HT5953 How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

    How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

    Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
    On your iBook you can select the text and and then click on > More> Start speaking,  and you will get a certain speed, which tends to be too slow.
    But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple)  under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful.

  • Can the Mavericks dictation and speech app coexist with Dragon Dictate?

    I just turned on the dictation and speech app.  I already had dragon dictate installed.  Now nothing works for dictation.  Can they exist together?  How? Thanks for the help.

    I too have Dragon Dictate.  There appear to be some low-level device driver conflicts between Mavericks Dictate and Dragon Dictate, especially when using the Plantronics BT300 wireless headset.  The Plantronics BT300 unit has a pre-paired bluetooth USB attachment that connects with the wireless headset.
    Usually the Dragon Dictate software works when I launch it.
    When I try to use the BT300 headset with certain other apps, sometimes it hangs. 
    In particular, when using GoToMeeting, the Plantronics BT300 microphone works, but the Plantronics BT300 audio does not work.  I am able to use the built-in Mac speakers on my iMac to receive the audio.
    In trying to set up the BT300 headset for both microphone and audio output to the BT300 headset, the system displays the "beach ball" for lengthy periods of time.  A couple of times the entire iMac system hung, and I had to do a force power-off, then reboot.
    Today was the first time I attempted to turn on the Mavericks Dictate.  The entire system appeared to slow down around the attempt to use the Plantronics BT300 headset.  I will next turn off Dragon Dictate, and see if Mavericks Dictate will accept the BT300 unit.
    I have also a wired Plantronics headset, and will unhook the bluetooth headset and plug in the wired headset and see if that combination works any better.
    Just to complicate things, I have also installed Parallels Desktop for Mac (and keep it updated to the current version and update level for Mavericks).  Parallels has a virtual audio adapter, and I have NOT yet tried using either version of Dictate with a Windows guest operating system.
    Advice and comments are appreciated.

  • I have a hp pavilion dv 9260 nr laptop and looking for recov. sys. cds windows vista alt 64b

    i have a hp pavilion  dv  9260 nr laptop  and looking for recov. sys. cds windows vista alt  64bit anybody can help? please. 

    You can phone HP to order a set.Choose your country here> Contact HP
    Or they are here>>http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv9260nr&bkm=Results#Results
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • When I turn the dictation and speech on , I try to start dictating but it does not work

    When I turn the dictation and speech on , I try to start dictating but it does not work

    Are you connected to the Internet? Dictation relays to Apple servers.

  • HT5449 I have a macbook pro and I do not see DICTATION AND SPEECH in VIEW

    I have a macbook pro and I do not find in VIEW, the DICTATION nad SPEECH OPTION To turn on

    Have you enabled Dictation in the System Preferences?
    Enable it, and select a keyboard shortcut.
    Dictation will become active, when the cursor is inside a textfield in a document and you type the keyboard shortcut, e.g.function key twice.
    Where exactly does this not work for you?

  • Dictation and Speech Preference Pane Broken in ML

    So I got Mountain Lion installed (upgrade from SL), most everything seems to be working fine except for one odd quirk. I was excited to try out the new dictation feature, however when I try to open the preference pane I get:
    The first time I try it (on freshly opened System Prefs), this this hereafter:
    I defintely have an intel mac, but it does not make sense why the Speech pane will not work on Intel, definitely something goofy going on.
    I tried the usual Repaired Permissions, restart etc. to no avail. I drilled down into the console log files and found this every time I tried to open up the pane:
    Process:         DictationIM [63752]
    Path:            /System/Library/Input Methods/DictationIM.app/Contents/MacOS/DictationIM
    Identifier:      DictationIM
    Version:         1.0.51 (1.0.51)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [294]
    User ID:         501
    Date/Time:       2012-07-28 19:46:05.913 -0400
    OS Version:      Mac OS X 10.8 (12A269)
    Report Version:  10
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** setObjectForKey: key cannot be nil'
    terminate called throwing an exception
    abort() called
    Any ideas how to fix this issue? Everything else on ML works great (except for full screen mode when you have more than one monitor hooked up, but I won't even get into that)
    17" MacBook Pro Late 2010, 2.66ghz Intel Core i7, 8gb ram

    I did check that already (it is unchecked, everything running in 64 bit) ... still no dice.
    I did just try using it on another blank user account, and it works there. Would be nice to be able to use it without having to transfer everything to a new account!

  • Ipod change from Windows to Mac, and restore freeze, no iPod Preferences

    hello. am having some problems. previously, i was using my iPod with iTunes for Windows. As I now have a MacBook, I have the latest iTunes and have all of my songs in the library.
    When I first plugged my iPod in, it recognised the iPod model, software etc, and i clicked on the restore function. iTunes stopped responding, and so I forced quit. Each time i now plug the iPod in, it appears on my desktop, but not on the device panel in iTunes, so I have not been able to get to my iPod preferences to reset. I have tried to reset the iPod iteself but this does not seem to have helped.
    If anyone can offer me any help, would really appreciate.
    Cheers
    macbook
    macbook    

    Hey, not a dumb ?, in fact a good ?......nope, I did not install any software at all, I just figured the imac would recognize it automatically.
    We also got a brand new ipod nano, not the new video one, the older one, it was a back to school promo thing, anyways, I got that one all setup no problem, just plugged it in and was good to go.
    So I have to install some software on the mac for the mini?
    Been doing more reading, sounds like I might have to erase the memory of the mini somehow, not sure how?? But what about my 1200 songs on the PC, how do I get those over to the mac and into itunes?

  • I am running Firefox v28. When I open firefox, I get the toolbar and I can even open preferences window but that all! No browser windows (or even help pages).

    I use a Macbook pro 13" version 10.9.1. I have tried the obvious fixes ie turning pc off and on. Chrome and Safari run fine so no network issues. I followed the advice to turn Proxy setting off but this made no difference. Really dont know what to do so help appreciated. (the links below - to install the 'trouble shooting' or the 'educated guess' about my system does not open.

    Hello Lozzer62,
    Thanks for contacting Mozilla Support. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Cheers,
    Patrick

  • Events and Projects freeze in the browser window

    Hardware:  Mac OS X Version 10.6.8
    2.53 Processor  4GB Ram
    Re:  IMovie 09 Version 8.06 (821)
    I recently copied my entire I Movie library to my external 1T harddrive and have 250 GB of free space left on my MacHD.  Once I completed the copy, I erased my library from my hard drive.  Everything worked fine until...
    The images suddenly froze in the edit broswer/window...across all of my events and projects.  The audio works fine but all I get is still images.  I tried:
    Updating to Version 9.02 & 9.04 ( it won't let me )
    Rebooting
    Splitting Frames
    Using exisiting events to create new projects
    Also tried some other ideas but nothing has worked.  Shortly beofre this happened, I noticed the audio in many clips started to come through despite using the ducking feature.  I figured out how to fix that ( which took many hours of trial and error ). If anyone can give me some pointers to fix this somehow, I'd appreciate it...GREATLY.
    Thanks!   

    A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
    The helpers at that forum are more knowledgeable about web development issues.
    You need to register at the MozillaZine forum site in order to post at that forum.
    See http://forums.mozillazine.org/viewforum.php?f=25

  • I cant get Firefox to download any files including updates. I get an error saying "Windows has closed the filepicker unexpectedly" and Firefox freezes. I use Windows 7 64 bit and I have the error in Firefox 7. Any help much appreciated.

    At any attempt to download even update I get an error that says "Windows has unexpectedly closed the file picker".

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • Dictation and speech

    Im very confused as to how this works. Mistakes are made about as often as correct interpretations, only making it about 50% accurate. The mistakes seemingly know that they are there as they are underlined in blue. How does one go about fixing them though? I don't see any way to do that. Without fixing the mistakes the same mistakes are made each time you say the same words.

    Please carefully read Mac Basics: Dictation lets you speak text instead of typing

  • I would like to use dictation and it wont even let me turn it on. Why?

    I want to turn my dictation on but it desnt even give me the option.

    in system preferences under "system", click "dictation and speech" and make sure it's turned on.

  • When clicking on links that open in a new window, the links don't open and Firefox freezes in a way. I can navigate the page I am on but cannot click to open a new tab or bookmark.

    When navigating the internet, if I come across a web page that has a link to open a picture or program in a new window, if I click on it, it does not open. Firefox immediately looses functionality in that I cannot open a new tab with the mouse wheel, right click to open a new tab, or use my bookmarks in either the drop down or toolbar to navigate away. I can usually still navigate the page that I am on, for example, (https://loanconsolidation.ed.gov/AppEntry/apply-online/appindex.jsp), when it freezes I cannot click on any of the content at the center of the page but I can still use the links from the list on the far left. For an example of the pictures, (http://www.insect-sale.com/), if you click on "New Arrivals" at the top of the page it takes you to a list of products that can only be viewed by clicking on them. Usually a picture of the item would open in a small window but it does not and Firefox freezes. This has also happen when I try a view a degree audit on a school's website where a program would usually open in a new window. The only thing I have been able to find that still functions properly when this happens is the home page button. I can click on it or use the wheel to open it in a tab just fine, but if I try and go anywhere else I cannot. The only way I can get Firefox back to normal is to use the Task Manager and end the process. Another thing I have noticed, that may or may not be related; is that my Norton Internet Security toolbar, that should show up below the bookmarks toolbar and above the tabs, only shows up about 1 out of every 10 times I open Firefox. Some days it doesn't show up at all. If it does show up and I log into Identity Safe, the autofill for the programed website works, even if the toolbar doesn't show up the next time I open Firefox.

    Go to Tools->Options->Apps
    Here you should see two columns: Content Type on the left, Actions on the right.
    Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
    Always Ask - Firefox will ask each time: What do you want to do with this file?
    Save file - Firefox will save this file to your computer
    Use - Firefox will give this file to the program to open it
    In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
    Tools->Options->General->Download

  • I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

    I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
    4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
    54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
    22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
    8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
    a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

    None if these crash reports seem to have been send.
    Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

Maybe you are looking for

  • How do I change a printer's IP address, !again! :(

    O Great, Knowledgeable and Kind printer gurus, I'm in a similar situation to Peter Minter's old archived thread at http://discussions.apple.com/thread.jspa?messageID=2188292? ... So I'm sorry to be the next confused person Sorry to be asking ask a q

  • Laserjet 1300n drivers on Windows XP-32 or 32-bit drivers to the Win7-64 server

    A customer of mine lost the capability to print to the shared printer on a Win7-64 box (on a parallel cable).  I uninstalled and re-installed the drivers on the Win7 server and a Win7-64 box.  Both work great. I am unable to re-install the driver on

  • Error installing oracle 10g on WIN2000 server

    Where we install oracle 10g on win2000 server, the OUI show the 78% advance but simply close the window and don't show any error, next show the last messages from C:\Program Files\Oracle\Inventory\logs path: INFO: ------------------------------------

  • How to Abort all opened Transactions at once?

    Hi, Is there any way to abort all open transactions at once ? Thanks for any help. Thanks, reddy

  • LOV Performance Forms 4.5

    Hi, We are working on Oracle applications 11.0.3 (Oracle Forms 4.5). We have a LOV to fetch items form mtl_system_items based on item_type and organization. The LOV is taking a lot of time to fetch data and hangs in between. Please advise as to how c