Dictionary error message
In Microsoft Word for Mac, I keep getting an error message that says the custom dictionary is not available. Sometimes it lets me add new words to my custom dictionary and sometimes it doesn't (using another error message about either the dictionary is full or my word contains incompatible something or other. Anyone know how to fix this?
Mr. New Person:
I am going to have to once again assume that you are using Microsoft Word 2008 for Mac since you are keeping the version a secret LOL.
To correct your issue please read what is posted [HERE|http://forums.macrumors.com/showthread.php?t=460888] and follow the instructions until your issue has been addressed and resolved.
Let us know how it went.
Axel F.
Similar Messages
-
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
I want to install Oxford Advanced Learner's Dictionary in my laptop but each time i tried, I received an error message "nspr4.dll in missing". What should I do to solve this problem as I am desparate to install it because I need it very much.
Nspr4.dll error message might appear while using or installing certain programs.
Nspr4.dll error are caused by situations that lead to the removal or corruption of the nspr.dll files and in some cases , nspr4.dll error could also indicate a registry problem
follow the following steps.
1. Download nspr4.dll flie from a reliable source
2.open thee file location of program(eg. C:\Program Files\Oxford Dictionary)
3.Drag the downloaded nspr4.dll file to the above file location
4.Now Launch the program
Thank You
Give it a LIKE -
Main spell dictionary installation error message
When I run spellcheck (check spelling) within AppleWorks 6, I get the error message, "The main spell dictionary is not installed." I don't remember doing anything that would impact the spell dictionary, and spellcheck is working as I enter this meesage (the last typo is underlined in red).
What's up? Do I need to install a spell dictionary, and if so how?
Thanks.Here's the post. Kappy's about as knowledgeable as one gets here.
It will work but is not fully compatible. So there will be a few issues sometimes.
I don't use AppleWorks6 much anymore cause Pages is so much easier to use for me.
DALE -
Clear the webdynpro error messages in Dictionary serach help window
Hi ,
I have a search help attached to one of the table column in table control. In the On Enter event of search help i am trowing some error messages. I am using Dictionary standard search help....
On enter event is working fine. My issue is when some error messages are thrown in the webdynpro view those messages are also displaying in the search help window. Whatever may be the message is showing in the webdynpro view at runtime all those messages are getting displayed when i open a searchhelp in the table control.
How can i clear those messages ? When its standard searchhelp where can i write the code to clear the webdynpro meesages.
Could anybody suggest me on this....?
Thanks & Regards
Sireesha...Hi Sireesha,
As far as I know there is no direct way to track the event of F4 window opened, so that we can clear the messages...
Below is one solution.
WD Standard fires an event when ever a window is opened in the application.
The event that is fired is CL_WDR_WINDOW->IF_WD_WINDOW~WINDOW_OPENED
This is an instance event. Please follow the below steps to handle this event
1) Store the message manager reference in a class as a Static variable
2) Create a Event handler for all instances (A Static event handler will suffice)
3) Give importing parameter Sender (it will be automatically identified by the class builder and the corresponding CL_WDR_WINDOW reference will be populated into this at runtime)
4) Now use the below code to clear the messages
DATA lcl_window_ref TYPE REF TO cl_wdr_internal_window.
TRY.
lcl_window_ref ?= sender.
CATCH cx_sy_move_cast_error.
RETURN.
ENDTRY.
IF lcl_window_ref->is_value_help = abap_true.
CALL METHOD gr_wd_msg_mgr->clear_messages
EXPORTING
including_permanent_msg = abap_true.
ENDIF.
below is how u can set the handler
Assuming handler method is clear_msgs_on_f4wd_window_open
SET HANDLER clear_msgs_on_f4wd_window_open FOR ALL INSTANCES.
Please let me know if you need more help
Thanks,
Anand -
Report Error Message in BPM Alert?
Hi,
I designed a BPM with a transformation step and a send step. For each step I have an exception branch where I want to trigger an alert, when something goes wrong.
I already configured in TC ALRTCATDEF an alert category (Dynamic Text activated). And I made an container operatinon with folloing control step, where I for example report the message ID.
But, going through the blogs and threads I didn't find the information, how I can report the exact error message, the error category (and in case of the send step the adapter and the adapter error text) to the alert. How can I get this data to put it into a container variable?
Can anybody give me some information about that?
Thanks in advance
Dominic
System: PI 7.0 SP15You can use the below information for raising an Alert for adapters.
Specific Error Information from the Adapter Engine:
Container Element
ABAP Dictionary Data Type
Meaning
SXMS_TO_ADAPTER_TYPE
CHAR70
Adapter type
SXMS_TO_ADAPTER_ERRTXT
CHAR70
Error text from the Adapter Engine
Refer the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm -
Error Message Creating Site Template
Hello,
When I go to Site Actions --> Site Settings --> Site Actions --> Save site as template, I receive an error message. I have asked several people to help me out with this, but I have received paths to find the ULS and locate the issue with the message.
Instead I went to Galleries --> Solutions. When I went to 'Activate' the page, I viewed the following error message:
Feature definition with Id 8a754d6e-e081-4d24-bfb8-7e4a7c5136f8 failed validation, file '1ProjectCharterListInstances\ElementsFields.xml', line 3166, character 82: The 'BdcField' attribute is not allowed.
I have gone to Central Administration -->Manage Service Applications--> Business Data Connectivity Service Application, but this is where ECT's were created and there were no ECT's created for this project. I even tried re-creating the site on a Parent
Level and I still received the same error message. I have gone to \Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML, per another person having a similar issue here on MSDN, but I have no Idea where to go from here.
I see there is a 'BDCMetadata' and a 'BDCMetadataResource' files that will open up in Visual Studio.
Someone else told me that I need to go to 14/TEMPLATE/FEATURES, went there too, but I have no clue what I am looking for. Someone else told me that I
needed to check c:\program files\common files\microsoft shared\web server extensions\14\logs, and I
did and see the log and am trying to view it for why the issue may have arisen.
I am still new to SharePoint and any help would be greatly appreciated.
Richell A. GrantHere is what I found from the ULS Viewer:
w3wp.exe (0x1E30) 0x26F0
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Request (POST:http:// /Project/_layouts/savetmpl.aspx))
w3wp.exe (0x1E30) 0x26F0
SharePoint Foundation Logging Correlation Data
xmnv Medium
Name=Request (POST:http:// /Project/_layouts/savetmpl.aspx)
42ea0094-cd5c-49ea-bfa6-932843c2ff36
w3wp.exe (0x1E30) 0x26F0
SharePoint Foundation Logging Correlation Data
xmnv Medium
Site=/ 42ea0094-cd5c-49ea-bfa6-932843c2ff36
w3wp.exe (0x1E30) 0x26F0
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=12.7525294395875
42ea0094-cd5c-49ea-bfa6-932843c2ff36
OWSTIMER.EXE (0x1CAC) 0x10D4
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job job-application-server)
f280be4d-f2fe-4695-8d6e-31a7ce3cc012
OWSTIMER.EXE (0x1CAC) 0x10D4
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job job-application-server). Execution Time=2.53074859543453
f280be4d-f2fe-4695-8d6e-31a7ce3cc012
OWSTIMER.EXE (0x1CAC) 0x2A44
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job Health Statistics Updating)
4913212b-0774-4fef-9318-a86b32086e58
OWSTIMER.EXE (0x1CAC) 0x2A44
SharePoint Foundation Topology
8xqz Medium
Updating SPPersistedObject
SearchServiceApplicationMonitoring Name=Monitoring_7F19A5D194F942e6A9856FCFD6EE6F63. Version: 639018 Ensure: False, HashCode: 1614248, Id: 3ee4d239-4cc9-4539-9e13-4dfb012df03f, Stack: at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
at Microsoft.Office.Server.Search.Monitoring.TraceDiagnosticsProvider.UpdateServiceApplicationHealthStats() at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean
isTimerService, Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
4913212b-0774-4fef-9318-a86b32086e58
06/07/2011 09:06:30.74 OWSTIMER.EXE (0x1CAC)
0x2A44 SharePoint Foundation
Monitoring b4ly
Medium Leaving Monitored Scope (Timer Job Health Statistics Updating). Execution Time=40.8853780327531
4913212b-0774-4fef-9318-a86b32086e58
06/07/2011 09:06:30.78 w3wp.exe (0x1A50)
0x2E90 Access Services
Data Layer 8jg2
Medium ResourceManager.PerformCleanup: Memory Manager: CurrentSize=681357312.
53fed7f1-f8f4-2342-0000-000050f7b00c
06/07/2011 09:06:31.45 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (Team Discussion). Execution Time=204.276441523127
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.45 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (Add WebParts#86). Execution Time=204.367548472562
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.52 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#5). Execution Time=12.5685701968573
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.52 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#6). Execution Time=9.59136264231098
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.53 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#7). Execution Time=12.5647304403677
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.55 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#8). Execution Time=9.07508992884233
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.56 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#9). Execution Time=13.0384167636787
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.58 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#11). Execution Time=11.7018324365175
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.59 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#12). Execution Time=11.2941201110737
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.59 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#13). Execution Time=10.8448686017876
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:31.81 w3wp.exe (0x1A50)
0x2C54 Access Services
Data Layer 8jg2
Medium ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
11c5f189-f8f4-2342-0000-000050f7b00c
06/07/2011 09:06:32.72 OWSTIMER.EXE (0x1CAC)
0x0654 SharePoint Foundation
Monitoring nasq
Medium Entering monitored scope (Timer Job Search Health Monitoring - Trace Events)
e64e2b2a-32b6-402a-be85-bc939eb9ff8b
06/07/2011 09:06:32.72 OWSTIMER.EXE (0x1CAC)
0x0654 SharePoint Foundation
Monitoring b4ly
Medium Leaving Monitored Scope (Timer Job Search Health Monitoring - Trace Events). Execution Time=10.2877548420202
e64e2b2a-32b6-402a-be85-bc939eb9ff8b
06/07/2011 09:06:33.64 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=12.4373203386665
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.72 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
High
Leaving Monitored Scope (EnsureListItemsData#17). Execution Time=10.7935554923353
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.90 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Topology umad
Medium Solution Deployment : Looking for 'ReceiverAssembly' attribute in manifest root node for solution 'Project Charter2.wsp'.
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.90 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Topology umae
Medium Solution Deployment : Looking for 'ReceiverClass' attribute in manifest root node for solution 'Project Charter2.wsp'.
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.90
w3wp.exe (0x1E30) 0x26F0
SharePoint Foundation Topology
umal Medium
Solution Deployment : Missing one or more of the following attributes from the root node in solution Project Charter2.wsp: assembly '', type ''.
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.93 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
General 9fjj
Monitorable SPSolutionExporter: Microsoft.SharePoint.SPException:
Feature definition with Id 110e214c-5235-4a79-b8fd-3a3244743122 failed validation, file '1ProjectCharterListInstances\ElementsFields.xml', line 3166, character 82:
The 'BdcField' attribute is not allowed. at
Microsoft.SharePoint.Administration.SPSolutionPackage.SolutionFile.FeatureXmlValidationCallBack(Object sender, ValidationEventArgs evtargs) at System.Xml.Schema.XmlSchemaValidator.SendValidationEvent(String code, String arg)
at System.Xml.Schema.XmlSchemaValidator.ValidateAttribute(String lName, String ns, XmlValueGetter attributeValueGetter, String attributeStringValue, XmlSchemaInfo schemaInfo) at System.Xml.XsdValidatingReader.ValidateAttributes()
at System.Xml.XsdValidatingReader.ProcessElementEvent() at System.Xml.XsdValidatingReader.Read() at System.Xml.XmlReader.MoveToContent() at System.Xml.XmlReader.IsStartElement() at Microsoft.SharePoint.Utilities.SPUtility.XsdValidateXml(XmlTextReader
xmlStreamReader, String friendlyName, String pathXsdFile, String tagExpectedRootNode, ValidationEventHandler xsdValEventHandler) at Microsoft.SharePoint.Administration.SPSolutionPackage.SolutionFile.ValidateFeatureXmlFile(String rootTagElement)
at Microsoft.SharePoint.Administration.SPSolutionPackage.AddFeatureElementsCore(XmlNodeList nodeList, String strFeatureDirRelativeToCabFile, Guid featureId, Dictionary`2 filesAdded) at Microsoft.SharePoint.Administration.SPSolutionPackage.AddFeatureElements(XmlNode
root, String strFeatureDirRelativeToCabFile, String strFeatureXmlFilename, Guid featureId) at Microsoft.SharePoint.Administration.SPSolutionPackage.WspSolutionFeature.ProcessFeatureXml() at Microsoft.SharePoint.Administration.SPSolutionPackage.InitSolutionFeatures(XmlNode
root) at Microsoft.SharePoint.Administration.SPSolutionPackage.ProcessSolutionManifest() at Microsoft.SharePoint.Administration.SPSolutionPackage.Load() at Microsoft.SharePoint.Administration.SPSolutionLanguagePack.CreateSolutionPackage(SPRequest
request, String name, String signature, Byte[] fileBytes) at Microsoft.SharePoint.SPUserSolutionCollection.<>c__DisplayClass1.<AddOrUpgrade>b__0() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.SPUserSolutionCollection.AddOrUpgrade(SPListItem item, SPUserSolution existingSolution) at Microsoft.SharePoint.SPUserSolutionCollection.Add(Int32 solutionGalleryItemId) at Microsoft.SharePoint.SPSolutionExporter.ExportWebToGallery(SPWeb
web, String solutionFileName, String title, String description, ExportMode exportMode, Boolean includeContent, String workflowTemplateName, String destinationListUrl)
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.93 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Runtime tkau
Unexpected System.InvalidOperationException:
Error copying temporary solution file to solutions gallery: _catalogs/solutions/Project Charter2.wsp at Microsoft.SharePoint.SPSolutionExporter.ExportWebToGallery(SPWeb web,
String solutionFileName, String title, String description, ExportMode exportMode, Boolean includeContent, String workflowTemplateName, String destinationListUrl) at Microsoft.SharePoint.SPSolutionExporter.ExportWebToGallery(SPWeb web, String
solutionFileName, String title, String description, ExportMode exportMode, Boolean includeContent) at Microsoft.SharePoint.ApplicationPages.SaveAsTemplatePage.BtnSaveAsTemplate_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs
e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.95 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Performance nask
Monitorable An SPRequest object was not disposed before the end of this thread. To avoid wasting system resources, dispose of this object
or its parent (such as an SPSite or SPWeb) as soon as you are done using it. This object will now be disposed. Allocation Id: {FD36747E-91CF-43D5-A512-D6302254D976} To determine where this object was allocated, set Microsoft.SharePoint.Administration.SPWebService.ContentService.CollectSPRequestAllocationCallStacks
= true. 42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.95 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Performance nask
Monitorable An SPRequest object was not disposed before the end of this thread. To avoid wasting system resources, dispose of this object
or its parent (such as an SPSite or SPWeb) as soon as you are done using it. This object will now be disposed. Allocation Id: {2949D429-CD91-431F-9F52-37A89F11B3BD} To determine where this object was allocated, set Microsoft.SharePoint.Administration.SPWebService.ContentService.CollectSPRequestAllocationCallStacks
= true. 42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.95 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Performance nask
Monitorable An SPRequest object was not disposed before the end of this thread. To avoid wasting system resources, dispose of this object
or its parent (such as an SPSite or SPWeb) as soon as you are done using it. This object will now be disposed. Allocation Id: {34651BFE-E7C8-48EA-9BFA-583E11E02F40} To determine where this object was allocated, set Microsoft.SharePoint.Administration.SPWebService.ContentService.CollectSPRequestAllocationCallStacks
= true. 42ea0094-cd5c-49ea-bfa6-932843c2ff36
06/07/2011 09:06:33.95 w3wp.exe (0x1E30)
0x26F0 SharePoint Foundation
Monitoring b4ly
Medium Leaving Monitored Scope (Request (POST:http:// /Project/_layouts/savetmpl.aspx)). Execution Time=5219.04728660117
42ea0094-cd5c-49ea-bfa6-932843c2ff36
I (BUI) what I don't understand or I know it's an error but I have no idea how to fix these. This is what I found in the ULS Viewer! This is so much easier than how I was looking at this log yesterday and Friday.
Richell A. Grant -
How can I Fetch the error message from a OAF page
Hi,
A confirmation message is coming on the page,I want to catch the error message and depending on its value want to add some validation.
Is that possible to fetch the error message from the page?is it a confirmation message or an error message ?
Code in the OAF page would be raising an OAException with a message name defined in message dictionary.
you would need to look at the code to understand where this is thrown from and add your validation there.
Tapash -
Error message handling in BAPI...
Hi Guys,
I am working on documentation of a BAPI used SAP insurance module. Now I want to see all the error messages associated/ handled in that BAPI. How can I do that ? Is there a table in data dictionary where I can see error messages handled by a given Function module/ BAPI?
Any inputs will be highly appreciated.
Thanks.
Regards,
Tushar.Hi,
here´s one possible solution:
CALL FUNCTION 'MESSAGES_INITIALIZE'.
LOOP AT it_return_bapi.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = it_return_bapi-id
exception_if_not_active = ' '
msgty = it_return_bapi-type
msgv1 = it_return_bapi-message_v1
msgv2 = it_return_bapi-message_v2
msgv3 = it_return_bapi-message_v3
msgv4 = it_return_bapi-message_v4
txtnr = it_return_bapi-number
zeile = ' '
EXCEPTIONS
message_type_not_valid = 1
not_active = 2
OTHERS = 3.
ENDLOOP.
CALL FUNCTION 'MESSAGES_STOP'
EXCEPTIONS
a_message = 04
e_message = 03
i_message = 02
w_message = 01.
IF NOT sy-subrc IS INITIAL.
CALL FUNCTION 'MESSAGES_SHOW'
EXPORTING
i_use_grid = 'X'
i_amodal_window = i_amodal_window
EXCEPTIONS
inconsistent_range = 1
no_messages = 2
OTHERS = 3.
ENDIF.
ENDFUNCTION.
Best regards -
InDesign won't start (PC) Plug-in conflict error message
Hi, I'd really appreciate some help with this problem detailed below. Please note that i do not have the option to uninstall and reinstall the program. My disc is on a boat - I sent it snail mail back to Ireland from Australia. I am doing a graphic design course online so it's essential that I get this working again. Any advice would be greatly appreciated.Thanks in advance for your assistance.
PROBLEM: I cannot open Adobe InDesign. It displays one of two error messages
"The InDesign.exe plug-in conflicts with InDesign.exe. Try removing one of the two plug-ins from the Plug-Ins folder and restart InDesign"
OR now more often:
"This programme has stopped working and that Windows is checking for a solution... ... ... A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
There are a range of errors in the AMT launch log (see below) however I don't know what they mean or how to proceed. Tried to search on the forum but it's all a bit over my head at this stage.
Here's the status on the troubleshooting I attempted based on the Adobe help information
http://helpx.adobe.com/creative-suite/kb/troubleshoot-launch-issues-problems-cs5.html
temporarily disabled plugins - COMPLETED / PROBLEM PERSISTS
recreated preferences (manual) - COMPLETED / PROBLEM PERSISTS
disable compatibility mode - COMPLETED / was not on compatibility mode
disabled start-up items and services - COMPLETED / PROBLEM PERSISTS
login with different account - NOT COMPLETE (there's only one account and it's an admin account)
delete all adobefnt*lst.files - COMPLETED / PROBLEM PERSISTS
troubleshoot font issues - COMPLETED/ PROBLEM PERSISTS
update video card driver - NOT COMPLETE (don't see how this is relevant to the problem)
search knowledge base - COMPLETED/ couldn't find any more relevant information
use Adobe Support Advisor - NOT COMPLETED (it says this is for installation failure so doesn't seem relevant)
viewed AMT launch log COMPLETED / "no value for key" items detected (see below for full script) (I have no idea what any of it means. some of it seems to refer to expiry date - please note that this is a student version purchased in 2013 and only installed on this computer) (checked the list of launch log errors and couldn't see any matching info: (Installation, launch log errors | CS5, CS5.5, CS6, CCM)
ALSO: attempted to update Adobe InDesign with with the 8.0.2 Update directly from the Adobe site: but the follow error message shows when I try to apply the updates: "Update Failed. Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy..." Instead I found the original Application Manager (UpdateInstaller) in the Program Files, opened this and it successfully Identified and downloaded the updates.
AMT Result (Note: the error message did not mention plug-in conflict in this instance)
2014-06-23 01:53:16 [9096] AMT: START SESSION, library version 6.0.0.75,6.0
2014-06-23 01:53:16 [9096] AMT: Initializing C:\Program Files (x86)\Adobe\Adobe InDesign CS6
2014-06-23 01:53:16 [9096] AMT: Adobe License Manager version 3.5 (build 2.0) RELEASE
2014-06-23 01:53:16 [9096] AMT: Virtualization Turned off
2014-06-23 01:53:16 [9096] PCDService: PCD Service in non-threaded mode
2014-06-23 01:53:16 [9096] performance: AMTPreObtainProductLicense took 0.826889 ms
2014-06-23 01:53:16 [9096] AMT: RW check key updated !
2014-06-23 01:53:16 [9096] AMT: App Product Locale [0] = en_GB
2014-06-23 01:53:16 [9096] config: Loading configuration for C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AMT\application.xml
2014-06-23 01:53:16 [9096] config: Found payload code {CFB770D7-8D43-1014-922B-CC2715FADE3F}
2014-06-23 01:53:16 [9096] PCDService: found driver code {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:16 [9096] config: config: Host app was installed, using installed license configuration.
2014-06-23 01:53:16 [9096] PCDService: Failed to read value for key [FLMap] in hive [InDesign-CS6-Win-GM{|}ALL] from cache : 769
2014-06-23 01:53:16 [9096] config: Setting current license to the driver at startup because no mapping was found.
2014-06-23 01:53:16 [9096] config: Setting current license to DesignWebSuitePremium-CS6-Win-GM [ALL]
2014-06-23 01:53:16 [9096] config: payload code: {CFB770D7-8D43-1014-922B-CC2715FADE3F}
2014-06-23 01:53:16 [9096] config: driver payload code: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:16 [9096] config: driver licensing code: DesignWebSuitePremium-CS6-Win-GM
2014-06-23 01:53:16 [9096] config: current licensing code: DesignWebSuitePremium-CS6-Win-GM
2014-06-23 01:53:16 [9096] config: current locale code: ALL
2014-06-23 01:53:16 [9096] config: Done loading configuration
2014-06-23 01:53:16 [9096] config: Setting insalled locales
2014-06-23 01:53:16 [9096] config: Changing locale to "en_GB" because old locale "" is not in the new list of installed languages
2014-06-23 01:53:16 [9096] AMT: Installed Locale [0] = en_GB
2014-06-23 01:53:16 [9096] AMT: Reordered Locale [0] = en_GB
2014-06-23 01:53:16 [9096] AMT: config: Finding license info for payload: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:16 [9096] AMT: config: PayloadCode: {CFB770D7-8D43-1014-922B-CC2715FADE3F}
2014-06-23 01:53:16 [9096] AMT: config: Driver PayloadCode: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:16 [9096] AMT: config: Installed LicensingCode: DesignWebSuitePremium-CS6-Win-GM
2014-06-23 01:53:16 [9096] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [BridgeTalkCode] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [ISO_TAGGING_DISABLED] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [EULA] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [Registration] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [Registration] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [Growl] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [Growl] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [EULAForPassive] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [EULAForPassive] in hive [DesignWebSuitePremium-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [Updates] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [SuiteFeatureCount] in hive [DesignWebSuitePremium-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] AMT: Application can be serialized (Non Passive App).
2014-06-23 01:53:16 [9096] PCDService: Failed to read value for key [LicensedLocales] in hive [InDesign-CS6-Win-GM{|}LicLoc] from cache : 769
2014-06-23 01:53:16 [9096] config: Setting current license to DesignWebSuitePremium-CS6-Win-GM [en_GB]
2014-06-23 01:53:16 [9096] config: Enigma Data Found from SLCache
2014-06-23 01:53:16 [9096] PCDService: Failed to read value for key [AMTConfigPath] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] from cache : 769
2014-06-23 01:53:16 [9096] PCDService: No value for key [ExpirationDate] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] AMT: Subsequent launch (serial [90148891609238039971]).
2014-06-23 01:53:16 [9096] AMT: Application state initialized. Obtaining Product License.
2014-06-23 01:53:16 [9096] AMT: Obtaining client features from cache.
2014-06-23 01:53:16 [9096] AMT: Obtaining client product info from cache.
2014-06-23 01:53:16 [9096] PCDService: No value for key [ExpirationDate] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [ENABLE_GUEST] in hive [DesignWebSuitePremium-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [ExpirationDate] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:16 [9096] AMT: Running in PROV_APP
2014-06-23 01:53:16 [9096] PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:16 [9096] config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:16 [9096] config: Using default media policy RET
2014-06-23 01:53:16 [9096] uiswitch: EULA has already been accepted.
2014-06-23 01:53:16 [9096] AMT: This is a subsequent launch. Deferring services.
2014-06-23 01:53:16 [9096] performance: AMTObtainProductLicense took 15.475057 ms
2014-06-23 01:53:16 [9096] AMT: Pre-Validating Product License.
2014-06-23 01:53:17 [9096] AMT: Services not yet loaded in this session.
2014-06-23 01:53:17 [9096] AMT: Loading services in background to get ready for Validate call.
2014-06-23 01:53:17 [9096] AMT: Spawning background thread to load services.
2014-06-23 01:53:17 [9096] performance: AMTPreValidateProductLicense took 98.811836 ms
2014-06-23 01:53:17 [9096] AMT: Starting work on prevalidate thread.
2014-06-23 01:53:17 [9096] performance: AMTGetProductClearSerialNumber took 0.012033 ms
2014-06-23 01:53:17 [9096] AMT: RW check key updated !
2014-06-23 01:53:17 [9096] AMT: AMT: PreValidating Product License.
2014-06-23 01:53:17 [9096] AMT: Launch Workflow not yet done in this session.
2014-06-23 01:53:17 [9096] AMT: Starting Background Subsequent Launch Workflow
2014-06-23 01:53:17 [9096] AMT: Starting ALM workflow.
2014-06-23 01:53:17 [9096] AMT: Initializing ALM for serialized activation.
2014-06-23 01:53:17 [9096] ALMService: Initializing as licensed app
2014-06-23 01:53:17 [9096] ALM: _info_: Start ALM 3.5 Release (build 3.5.2.0)
2014-06-23 01:53:17 [9096] SLCoreService: Starting up SLCore 2.0 Release (build 2.0.1.301001).
2014-06-23 01:53:17 [9096] SLCoreService: Service construction took 0.0 ms and succeed.
2014-06-23 01:53:17 [9096] ALM: _info_: LEID passed DesignWebSuitePremium-CS6-Win-GM is used to configure SLCore = 0
2014-06-23 01:53:17 [9096] ALM: _info_: Host app is Licensable App
2014-06-23 01:53:17 [9096] ALM: _info_: Got DOM List from FA_Set
2014-06-23 01:53:17 [9096] ALM: _info_: Found LEID InDesign-CS6-Win-GM with AMT Path C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AMT
2014-06-23 01:53:17 [9096] ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT
2014-06-23 01:53:17 [9096] PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:17 [9096] config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:17 [9096] config: Using default media policy RET
2014-06-23 01:53:17 [9096] ALM: _info_: MediaTagPolicy is RET
2014-06-23 01:53:17 [9096] PCDService: No value for key [NTL_WO_SN] in hive [DesignWebSuitePremium-CS6-Win-GM] in master : 10
2014-06-23 01:53:17 [9096] ALM: _info_: Canonical LEID is InDesign-CS6-Win-GM
2014-06-23 01:53:17 [9096] ALM: _info_: Driver LEID is DesignWebSuitePremium-CS6-Win-GM
2014-06-23 01:53:17 [9096] ALM: _info_: Set Running Locale to en_GB
2014-06-23 01:53:17 [9096] AMT: Performing ALM silent license verification.
2014-06-23 01:53:17 [9096] ALM: _info_: Validate license at Post-Chrome time, running locale is en_GB
2014-06-23 01:53:17 [9096] ALM: _info_: Searching license for locale en_GB ...
2014-06-23 01:53:17 [9096] PCDService: Failed to read value for key [901488916092380399712457] in hive [RejectedSNDomain_CS5] from cache : 769
2014-06-23 01:53:17 [9096] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for en_GB
2014-06-23 01:53:17 [9096] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is installed
2014-06-23 01:53:17 [9096] ALM: _info_: Found existing serialization under LEID DesignWebSuitePremium-CS6-Win-GM, the serial number locale is en_GB
2014-06-23 01:53:17 [9096] ALM: _info_: This is the running locale, stop the search
2014-06-23 01:53:17 [9096] PCDService: Failed to read value for key [901488916092380399712457] in hive [RejectedSNDomain_CS5] from cache : 769
2014-06-23 01:53:17 [9096] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for en_GB
2014-06-23 01:53:17 [9096] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is installed
2014-06-23 01:53:17 [9096] PCDService: Failed to read value for key [901488916092380399712457] in hive [RejectedSNDomain_CS5] from cache : 769
2014-06-23 01:53:17 [9096] PCDService: Failed to read value for key [901488916092380399712457] in hive [RejectedSNDomain_CS5] from cache : 769
2014-06-23 01:53:17 [9096] config: Setting current license to DesignWebSuitePremium-CS6-Win-GM [en_GB]
2014-06-23 01:53:17 [9096] SLCoreService: Syncing to license store...
2014-06-23 01:53:17 [9096] SLCoreService: Found server mkey.
2014-06-23 01:53:17 [9096] SLCoreService: Loading license references...
2014-06-23 01:53:17 [9096] SLCoreService: Found 2 license file(s)
2014-06-23 01:53:17 [9096] SLCoreService: Parsing license file [154259085.lic] succeed.
2014-06-23 01:53:17 [9096] SLCoreService: Parsing license file [65843405.lic] succeed.
2014-06-23 01:53:17 [9096] SLCoreService: License store synchronization took 208.4 ms and succeed.
2014-06-23 01:53:17 [9096] SLCoreService: Query license: type = 3, duration = permanent, remaining = permanent.
2014-06-23 01:53:17 [9096] SLCoreService: Query license: type = 3, duration = permanent, remaining = permanent.
2014-06-23 01:53:17 [9096] ALM: _info_: License Is Valid.
2014-06-23 01:53:17 [9096] SLCoreService: Query license: type = 3, duration = permanent, remaining = permanent.
2014-06-23 01:53:17 [9096] PCDService: No value for key [PDApp_WF] in hive [DesignWebSuitePremium-CS6-Win-GM] in cache : 519
2014-06-23 01:53:17 [9096] SLCoreService: Query license: type = 3, duration = permanent, remaining = permanent.
2014-06-23 01:53:17 [9096] ALM: _info_: Performing Disabled Check
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_Base_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_Distiller_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_Professional_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_Base_5.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_CameraRaw_5.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_ColorSettings_5.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_MiniBridge_2.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature CreativeSuite_6.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature CreativeSuite_DesignWebPremium_6.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Dreamweaver_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Dreamweaver_Base_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Fireworks_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Fireworks_Base_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Flash_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Flash_Base_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Flash_Pro_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Illustrator_16.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Illustrator_Base_16.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature InDesign_8.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature InDesign_Base_8.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature MediaEncoder_Base_3.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Photoshop_13.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Photoshop_Base_13.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Photoshop_Premium_13.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: No value for key [DataColl] in user dictionary.
2014-06-23 01:53:17 [9096] ALM: _info_: No data collection required
2014-06-23 01:53:17 [9096] ALM: _info_: Launching Silent Activator in Emergency Mode...
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_Base_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_Distiller_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Acrobat_Professional_10.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_Base_5.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_CameraRaw_5.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_ColorSettings_5.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Bridge_MiniBridge_2.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature CreativeSuite_6.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature CreativeSuite_DesignWebPremium_6.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Dreamweaver_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Dreamweaver_Base_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Fireworks_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Fireworks_Base_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Flash_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Flash_Base_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Flash_Pro_12.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Illustrator_16.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Illustrator_Base_16.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature InDesign_8.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature InDesign_Base_8.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature MediaEncoder_Base_3.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Photoshop_13.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Photoshop_Base_13.0 is enabled.
2014-06-23 01:53:17 [9096] SLCoreService: Feature Photoshop_Premium_13.0 is enabled.
2014-06-23 01:53:17 [9096] PCDService: No value for key [ALM_Info_S1] in hive [DesignWebSuitePremium-CS6-Win-GM{|}en_GB] in cache : 519
2014-06-23 01:53:17 [9096] ALM: _info_: Performing Block Check
2014-06-23 01:53:17 [9096] SLCoreService: Query license: type = 3, duration = permanent, remaining = permanent.
2014-06-23 01:53:17 [9096] ALM: _info_: Block Check ByPassed
2014-06-23 01:53:17 [9096] SLCoreService: Query license: type = 3, duration = permanent, remaining = permanent.
2014-06-23 01:53:17 [9096] ALM: _time_: (func: ALM_License_SilentValidate, duration: 0.265 sec)
2014-06-23 01:53:17 [9096] ALM: _info_: ALM_License_SilentValidate return license status: Valid And Activated
2014-06-23 01:53:17 [9096] config: Enigma Data Found from SLCache
2014-06-23 01:53:17 [9096] AMT: License check shows serialized product is already activated.
2014-06-23 01:53:17 [9096] PCDService: No value for key [STORE_URL] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:17 [9096] PCDService: Failed to get enigma data from hive [901487007673310060752956]: 769
2014-06-23 01:53:17 [9096] PCDService: Failed to get enigma data from hive [901487007673310060752956]: 769
2014-06-23 01:53:17 [9096] PCDService: No value for key [NTL_WO_SN] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:17 [9096] AMT: Running in PROV_APP
2014-06-23 01:53:17 [9096] uiswitch: Key Value WorkFlowType [SilentActivator]
2014-06-23 01:53:17 [9096] uiswitch: Key Value LaunchMode [postchrome]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppName [CS6 Design and Web Premium]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppPath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppLaunchPath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppRunningLEID [InDesign-CS6-Win-GM]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppDriverLEID [DesignWebSuitePremium-CS6-Win-GM]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppLicensingLEID [DesignWebSuitePremium-CS6-Win-GM]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AdobeCode [{CFB770D7-8D43-1014-922B-CC2715FADE3F}]
2014-06-23 01:53:17 [9096] uiswitch: Key Value DriverAdobeCode [{402F6F2E-5683-491C-977D-0CA599A07CAF}]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppAMTPath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AMT]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppDriverAMTPath [C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppLicensingAMTPath [C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppTrialSerialNumber [901487007673310060752956]
2014-06-23 01:53:17 [9096] uiswitch: Key Value ShowEULA [false]
2014-06-23 01:53:17 [9096] uiswitch: Key Value BuyURL [http://www.adobe.com/go/buy?]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AdobeIDCreated [true]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppAMTBkGndFilePath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AMT\LMResources\background.png]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppAMTLogoFilePath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AMT\LMResources\adobelogo.png]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppAMTLicenseAFAQFilePath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6\OBLRes\en_GB\LicenseFAQ.html]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppAMTConnectionFAQFilePath [C:\Program Files (x86)\Adobe\Adobe InDesign CS6\OBLRes\en_GB\ConnectionFAQ.html]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppRunningLocale [en_GB]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppListOfLocales [en_GB]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppProcessID []
2014-06-23 01:53:17 [9096] uiswitch: Key Value ProductID [543]
2014-06-23 01:53:17 [9096] uiswitch: Key Value ProductVersion [6.0]
2014-06-23 01:53:17 [9096] uiswitch: Key Value Platform [0]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppHostAppType [ALM_HostAppType_LicensedProduct]
2014-06-23 01:53:17 [9096] uiswitch: Key Value AppEULAFolderPath []
2014-06-23 01:53:17 [9096] uiswitch: Key Value NoTrial [0]
2014-06-23 01:53:17 [9096] uiswitch: Key Value UpgradeCheckRequired [0]
2014-06-23 01:53:17 [9096] uiswitch: Key Value ExtendedProfileRegURL [http://www.adobe.com/go/adobemembership_uk?productID=543&release=6.0&platform=0&locale=en_ GB&source=PCSTHX]
2014-06-23 01:53:17 [9096] uiswitch: Key Value ClaimSource [nag_trial]
2014-06-23 01:53:17 [9096] uiswitch: Key Value RefreshWF [0]
2014-06-23 01:53:17 [9096] uiswitch: Key Value TrialGrace [30]
2014-06-23 01:53:17 [9096] uiswitch: Key Value TrialLeft [30]
2014-06-23 01:53:17 [9096] uiswitch: Key Value ApplicationLaunchMode [LaunchMode_UI]
2014-06-23 01:53:17 [9096] uiswitch: SilentActivator
2014-06-23 01:53:17 [9096] uiswitch: Silent Activator
2014-06-23 01:53:17 [9096] uiswitch: Launched
2014-06-23 01:53:17 [9096] ALM: _info_: Entered ALM_NeedANAG
2014-06-23 01:53:17 [9096] PCDService: No value for key [ADOBEID_EXT_PROFILE] in hive [901488916092380399712457] in cache : 519
2014-06-23 01:53:17 [9096] ALM: _info_: Exiting ALM_NeedANAG
2014-06-23 01:53:17 [9096] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:17 [9096] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:17 [9096] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:17 [9096] PCDService: No value for key [Updates] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:17 [9096] AUMService: config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
2014-06-23 01:53:17 [9096] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Adobe InDesign CS6\updaternotifications.dll
2014-06-23 01:53:17 [9096] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Adobe InDesign CS6\updaternotifications.dll
2014-06-23 01:53:17 [9096] AUMService: IsUpdaterEnabled call
2014-06-23 01:53:17 [9096] AUMService: IsUpdaterEnabled call succeeded
2014-06-23 01:53:17 [9096] ALM: _info_: Deactivation menu is enabled
2014-06-23 01:53:17 [9096] AMT: Completed Launch Workflow successfully.
2014-06-23 01:53:17 [9096] AMT: Calling AUM API to create scheduler entry to be used by updater.
2014-06-23 01:53:17 [9096] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:17 [9096] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:17 [9096] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master : 10
2014-06-23 01:53:17 [9096] PCDService: No value for key [Updates] in hive [{CFB770D7-8D43-1014-922B-CC2715FADE3F}] in master : 10
2014-06-23 01:53:17 [9096] AUMService: config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
2014-06-23 01:53:17 [9096] AUMService: IsUpdaterEnabled call
2014-06-23 01:53:17 [9096] AUMService: IsUpdaterEnabled call succeeded
2014-06-23 01:53:17 [9096] AUMService: Get LEID xml call
2014-06-23 01:53:17 [9096] AUMService: Get LEID XML call succeeded
2014-06-23 01:53:17 [9096] AMT: AUM GetLEID called with status =0.
2014-06-23 01:53:17 [9096] AMT: Checking client features against cache.
2014-06-23 01:53:17 [9096] AMT: Feature InDesign_Base 8.0 is licensed (was licensed).
2014-06-23 01:53:17 [9096] AMT: Feature InCopy_Base 8.0 is unlicensed (was unlicensed).
2014-06-23 01:53:17 [9096] AMT: Validating client product info against cache.
2014-06-23 01:53:17 [9096] PCDService: No value for key [ExpirationDate] in hive [InDesign-CS6-Win-GM] in master : 10
2014-06-23 01:53:17 [9096] AMT: Starting Data Collection for SWTag_Init()
2014-06-23 01:53:17 [9096] AMT: DoISOTagging() productCanonicalLEID = InDesign-CS6-Win-GM;outMappedLEID = DesignWebSuitePremium-CS6-Win-GM, unused = DesignWebSuitePremium-CS6-Win-GM
2014-06-23 01:53:17 [9096] AMT: DoISOTagging() productPayloadCode = {CFB770D7-8D43-1014-922B-CC2715FADE3F};driverPayloadCode = {402F6F2E-5683-491C-977D-0CA599A07CAF}
2014-06-23 01:53:17 [9096] AMT: SWTag_Init() Tags Arguments CS6 Design and Web Premium; DesignWebSuitePremium-CS6-Win-GM; en_GB
2014-06-23 01:53:17 [9096] AMT: DoISOTagging() License Status = activated
2014-06-23 01:53:17 [9096] AMT: DoISOTagging() Tags 901488916092380399712457; 6.0; RETAIL
2014-06-23 01:53:17 [9096] AMT: DoISOTagging() Product Version 6; 0
2014-06-23 01:53:17 [9096] AMT: AMT: Product License PreValidated.
2014-06-23 01:53:17 [9096] AMT: Prevalidate indicates license is good and no UI required.
2014-06-23 01:53:17 [9096] performance: PreValidate thread took 379.182220 msHere's a few that weren't posted too:
Check these out:
iPod Folder with Exclamation Point After Disconnected From Computer
Put iPod into Disk Mode Manually – Worked for Me!
Good Thread About iPod Sad icon/Folder with Exclamation Point
I hope this helps! -
Ecc 6.0 Abap Dictionary error in SCCL
I am coping client from 000 into newly created client in my new ECC 6.0
environment.I am taking SAP_ALL as my client copy profile.
BUt in my client copy it is giving me "dictionary error" for more then
100 tables. Can you please explain me that.I am able to execute ME21 or
ME51n in my 000 and 001 but it is giving me "Table not configure" error
in newly copied client.
From my analysis of the source and target clients it would appear that
the client copy completed successfully.
On both the source and target you will see the entries are identical.
check on both the database object and the run-time object. The
same problems exist on each client. If there is an error/problem in
the source client, this is going to be copied over to the target client
You need to rectify these problems in the source client before copying
over to the target client.
If we check SE14
SE14 > Obj. name: A001 > click the 'Edit' button > Extras >
> Database object > Check
Table is not created in the database
Runtime Object is Consistent
Those warnings refers to several tables, and the message for all of
them is "DDIC Error (See SE14)". It means that all those tables are not
consistent, or do not exits at database level. Therefore, that problem
affect not only to the target client 100, but also to client 000.
What i think is
Problm is with support patches... as i have same system which is D11
(DEV) without any patches, and i did client copy in that. everything
went good. no dictionary error.Hello Nish,
Have you done SGEN already?
Anyways first try this out Check through SE11 if the tables exist in the new client. For example check for A001. If it shows up there try to activate the table and see if you get any errors. Let us know the results.
Regards.
Ruchit. -
Trying to create package and do not understand error message
What is wrong with this statement. Its say ASH411APPROVALEMAIL_PKG is not declared. I am trying to create it. Whats wrong?
ERROR MESSAGE
I get the following error.
Error at line 1: PLS-00201: IDENTIFIER 'ASH411APPROVALEMAIL_PKG' must be declared1. CREATE OR REPLACE PACKAGE BODY ASH411APPROVALEMAIL_PKG
2. AS
3. PROCEDURE ASH411APPROVALEMAIL_async (P_ATS_NO NUMBER
CODE
CREATE OR REPLACE PACKAGE BODY ASH411APPROVALEMAIL_PKG
AS
PROCEDURE ASH411APPROVALEMAIL_async (P_ATS_NO NUMBER)
AS
BEGIN
DBMS_SCHEDULER.define_program_argument (program_name => 'ASH411APPROVALEMAIL',
argument_position => 1,
argument_name => 'P_ATS_NO',
argument_type => 'NUMBER'
--,DEFAULT_VALUE => whatever_value
DBMS_SCHEDULER.ENABLE (NAME => 'ASH411APPROVALEMAIL');
DBMS_SCHEDULER.create_job (job_name => 'ASH411APPROVALEMAIL_JOBNAME'
|| P_ATS_NO,
program_name => 'ASH411APPROVALEMAIL',
enabled => TRUE,
comments => 'Comments'
EXCEPTION
WHEN NO_DATA_FOUND THEN
null;
END ASH411APPROVALEMAIL_async;
end ASH411APPROVALEMAIL_PKG;Hi, Howard,
csphard wrote:
Now when I go back and create the package again with the procedures it say package body created but does not
display anything."Package body created" is all it ever says (unless there's an error message).
How do I see the procedures I just created when I ran the package again with the procedures?If you want to see the source code, look at the CREATE PACKAGE BODY command in the script you just ran, or query the data dictionary view user_source:
SELECT text
FROM user_source
WHERE name = 'ASH411APPROVALEMAIL_PKG'
AND type = 'PACKAGE BODY'
ORDER BY line
; -
Core dump when starting extract, no error messages
Hello,
This is a basic one way replication, Data Pump and Replicat start but Extract stops at once.
In ggserr.log there's only a message: EXTRACT EORATE02 starting, nothing else. In ggsci it can be seen that it's stopped.
CHECKPARAMS didn't give the message "Parameters processed successfully", neither did it give error messages
when starting the extract.
There are no old Oracle processes which could prevent Extract from starting.
There's EORATE02.pce in dirpcs, although EORATE02 is not running. If I delete it and try to start the extract,
the extract will immediately stop.
A core file has been created in GG_HOME when trying to start the extract. I haven't been able to find out how to read it.
Source and target are on Aix 6100-06. The source database is Oracle 10.1.0.5, target database is Oracle 11.2.0.3.
The installation files are V32435-01.zip for db 10.1.0.5 (ggs_AIX_ppc_ora10.1_64bit.tar), V32437-01.zip
for db 11.2.0.3 (ggs_AIX_ppc_ora11g_64bit.tar). This is GoldenGate 11.2.1.0.1.
The db:s are on Asm.
There's only 1 table in source, 1 in target, they are identical and empty.
There's enough space in the OS.
If I run the extract in OS (extract paramfile dirprm/eorate02.prm), it ends like this without more information:
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********
Abort(coredump)
This happens in both ways of extract described below.
(1)
EXTRACT EORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
EXTTRAIL ./dirdat/data02/te
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
TABLE USER.myobjects2;
(2)
EXTRACT EORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
EXTTRAIL ./dirdat/data02/te
tranlogoptions COMPLETEARCHIVEDLOGONLY ALTARCHIVELOGDEST /backup/arch_log/abcd/ABCD/archivelog
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
TABLE USER.myobjects2;
Here's more information on this setup and commands which have been used:
add extract EORATE02 tranlog begin now, threads 1
add exttrail ./dirdat/data02/te, extract EORATE02, megabytes 5
EXTRACT EPMPTE02
PASSTHRU
RMTHOST HOSTNAME, MGRPORT 13447
RMTTRAIL /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
TABLE USER.myobjects2;
ADD EXTRACT EPMPTE02 EXTTRAILSOURCE ./dirdat/data02/te
ADD RMTTRAIL /u01/app/oracle/gg11210/for_db11/dirdat/data02/tr EXTRACT EPMPTE02, MEGABYTES 5
Target
REPLICAT RORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
HANDLECOLLISIONS
ASSUMETARGETDEFS
DISCARDFILE ./dirrpt/RORATE02.DSC, PURGE
MAP USER.MYOBJECTS2, TARGET USER.MYOBJECTS2;
add replicat RORATE02, exttrail /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
add checkpointtable ggs_owner.ggschkpt
Grants
Source:
grant connect, resource to ggs_owner;
grant select any dictionary, select any table to ggs_owner;
grant create table, alter any table to ggs_owner;
grant flashback any table to ggs_owner;
grant execute on dbms_flashback to ggs_owner;
grant execute on utl_file to ggs_owner;
grant create session, alter session to ggs_owner;
Target:
grant create session, alter session, resource, connect, select any dictionary to ggs_owner;
grant select any table, insert any table, update any table, delete any table to ggs_owner;
grant create table, alter any table, lock any table to ggs_owner;
Source
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
ggsci add trandata USER.myobjects2
mgr.prm
--GoldenGate Manager parameter file
PORT 13346
Target
GLOBALS
CHECKPOINTTABLE ggs_owner.ggschkpt
mgr.prm
--GoldenGate Manager parameter file
PORT 13447
Thanks for reading this far. Possible comments will be much appreciated!
Best regards
Edited by: user11323660 on 14.6.2012 6:39
Edited by: user11323660 on 14.6.2012 6:41Hello,
Could you wrap your process definitions in proper code brackets so its easier to understand.
Also I'm not sure what your problem is other then you are receiving core dumps. I'm happy to help.
Two small comment though regarding your ASM config
1 . Dont not use ggs_owner as the asm user
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********2. Create a TNSNAMES entry for your ASM instance and tehn use the following:
TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD *****Also here is an example of an extract process that I've setup on RAC database with ASM
EXTRACT EWFMMTLP
EXTTRAIL ./dirdat/ew
USERID GGATE@MY_DB, PASSWORD ggatehcc
DDLOPTIONS ADDTRANDATA RETRYOP RETRYDELAY 20 MAXRETRIES 5 REPORT
TRANLOGOPTIONS EXCLUDEUSER ggate
TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD ****
TRANLOGOPTIONS ALTARCHIVELOGDEST /u02/oracle/fast_recovery_area/MY_DB/archivelog
TRANLOGOPTIONS PURGEORPHANEDTRANSACTIONS
STATOPTIONS RESETREPORTSTATS
REPORT AT 00:01
REPORTROLLOVER AT 00:01
REPORTCOUNT EVERY 60 SECONDS, RATELet me know if that helps
Jan S. -
How to update more than 5 million records without error message ORA-00257:
Hi ,
I need to update some columns in my table which is contains about 5 million records
I 've already tried this
Update AAA_CDR
Set RoamFload = Null ;
but the problem is I've got the error message ("ORA-00257: archiver error. Connect internal only,until freed.) and the update consuming about 6 hours with no results ,
then I do the commands ( Alter system set db_recovery_file_dest_size=50G) and the problem solved .
but I need to update about 15 columns of this table to be null ,what I should do to overcome this message and update the table in reasonable time
Please Help Me ,The best way would be to allocate sufficient disk space for your archive log destination. Your database is not sized properly. NOLOGGING option will not do much for you because it' only applies to direct load operations when the data inserted into nologging table is selected from another table. UPDATE will be be logged, regardless of the NOLOGGING status. Here is the quote from the manual:
<quote>
LOGGING|NOLOGGING
LOGGING|NOLOGGING specifies that subsequent Direct Loader (SQL*Loader) and direct-load
INSERT operations against a nonpartitioned index, a range or hash index partition, or
all partitions or subpartitions of a composite-partitioned index will be logged (LOGGING)
or not logged (NOLOGGING) in the redo log file.
In NOLOGGING mode, data is modified with minimal logging (to mark new extents invalid
and to record dictionary changes). When applied during media recovery, the extent
invalidation records mark a range of blocks as logically corrupt, because the redo data
is not logged. Therefore, if you cannot afford to lose this index, you must take a backup
after the operation in NOLOGGING mode.
If the database is run in ARCHIVELOG mode, media recovery from a backup taken before an
operation in LOGGING mode will re-create the index. However, media recovery from a backup
taken before an operation in NOLOGGING mode will not re-create the index.
An index segment can have logging attributes different from those of the base table and
different from those of other index segments for the same base table.
</quote>
If you are really desperate, you can try the following undocumented/unsupported command:
ALTER DATABASE ARCHIVELOG COMPRESS ENABLE;
That will cause database to compress your archive logs and consume less space. This command is not documented or supported, not even in the version 11.2.0.3 and causes the database to start spewing ORA-0600 in version 10G. DO NOT USE IN A PRODUCTION ENVIRONMENT!!!! -
Local Client Copy Error : Completed w. Dictionary Errors
Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client 200
Source Client 100
Copy Type Local Copy
Profile SAP_CUST
Status Completed w. Dictionary Errors
User I998769
Start on 06.12.2009 / 12:47:59
Last Entry on 06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables 56872 of 58391
- Deleted Lines 5705995
- Copied Lines 5770444
Warnings and Errors
Table Name Component Package
A001 SD-MD-CM DDIC Error (See SE14)
A004 SD-MD-CM DDIC Error (See SE14)
A005 SD-MD-CM DDIC Error (See SE14)
A006 SD-MD-CM DDIC Error (See SE14)
A007 SD-MD-CM DDIC Error (See SE14)
A009 SD-MD-CM DDIC Error (See SE14)
A010 SD-MD-CM DDIC Error (See SE14)
A012 SD-MD-CM DDIC Error (See SE14)
A015 SD-MD-CM DDIC Error (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
Start of post-processing by application exits 13:57:48
Automatic postprocessing of client 200 was incorrect -> long text
Post-processing required for FINB_TR_CC_EXIT_TARGET
Validation/substitution: Programs should be regenerated
Selected tables : 58.391
Copied data in kBytes : 2.933.491
Deleted data in kBytes : 2.845.416
Program ended with error or warning, return code: W
Runtime (seconds) : 4.333
End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM
Maybe you are looking for
-
Itunes and my mac are not reckognizing cd's
I'm trying to download a cd on my Imac and the cd sits for 30 seconds and then ejects. Any thoughts?
-
I have just installed Contribute CS4 and connected to my web site. When I "view" my home page it shows fine but when I click" Edit Page" I cannot see the source code. There is just nothing showing to edit. What am I doing wrong? Also when I finish ed
-
Separating podcast and music libraries
I need some help organizing my libraries. I believe what I want is to have my Podcasts in on library that I can listen to and update while I'm at work during the day, but them have my music accessible when I plug in to my network at home. I'd also li
-
Why is my iPad deleting my hotmail emails without permission?
I have outlook on my laptop, which interacts with my hotmail account fine: as in it downloads emails from the server and leaves a copy on the server so I can still access them online or other devices. I set up my hotmail on my iPad2 mail client using
-
SQL Query to find dependencies
After using the Command Line Tool to add dependencies to a file, I'm now trying to query the repository for the information. I'm able to find the file and the dependency types, but i can not find the table/view that will show me what the file is actu