Did 11.1 restore the iTunes 10 feature of opening two iTunes windows at the same time?
I use an iPod Classic and I like rating my songs. When I get home from a trip, I will open two iTunes windows and play with the iPod music and iTunes music at the same time. I cannot upgrade to iTunes 11 because this feature was (stupidly) missing. Did 11.1 bring this functionality back?
Hi,
Unfortunately no.
Jim
Similar Messages
-
Can I open two Safari windows at the same time?
Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.
HI,
Open a browser window in Safari. Then Command + N
Press command and ~ or ` to toggle between the windows.
Carolyn -
My Itunes won't open when I click on the program.
My Itunes won't open when I click on the icon/program. It will flash like it's going to open on the bottom bar on windows 7 but then doesn't do anything, I have tried deleting it and redownloading it, however this still hasn't done anything. What can i do??? Thanks.
Can you right mouse click iTunes icon and choose "Run as Administrator"?
If this fails:
Try SCAN your Windows system files for possible corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files. -
HT201263 iTunes doesn't open after I plug in the phone
After trying to update to ios 7.0.6, iTunes doesn't open after I plug in the phone and doesn't show the message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.", which it should. What do I do now?
Hi vld17,
If your iPhone isn't showing up in iTunes after being placed in Recovery Mode, you may find one of the following articles helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden -
The requested feature DSC-Service is not found on the target machine.
Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
andHi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : devops-01
The SendConfigurationApply function did not succeed.
+ CategoryInfo : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
+ FullyQualifiedErrorId : MI RESULT 1
+ PSComputerName : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work. -
My iTunes won't open! It keeps saying 'The iTunes Library.itl is locked on a locked disk or you not have write permission for this file.' Please Help!
this may happen on external drives if:
The external drive was hotpluged (removed) without going the correct "eject" way
The iTunes library (database) got corrupted
First Aid for external drive
Close iTunes
Unmount (eject) external drive the right way.
Mount drive again
Go to Workplace -> right click external drive -> choose "clean up" This will force the filesystem to rescan the file structure of the drive and rebuilding the file system table and journaling file.
After the tool shows "done" (could last some time depending on size of drive) restart iTunes
If your iTunes library is on your internal drive, this may happen
The system was not shoot down correct, e.g. "pulled the plug"
The iTunes library (database) got corrupted
First Aid for internal hard drive
Close iTunes
Reboot system
Go to Workplace -> right click external drive -> choose "clean up"
After the tool shows "done" (could last some time depending on size of drive)
Reboot system, restart iTunes
If none of the above fixes your problem, post here.
Lupunus -
After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX
Have you revieved this support document?
TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
ITunes will not open on my iPhone with the new update 10/18/13
iTunes will not open on my iPhone after the new update 10/18/13. It opens on my iPad that also has the new update; just not my iPhone.
OK, so what troubleshooting steps have you taken? Have you taken the ones recommended in the User Guide? Exactly what HAVE you done thus far to help solve your problem?
-
updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help meFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad and not the other way around. It basically is trying to make my old village the new village, meaning I lose a lot of progress. How do make it combine the 2? If I cannot, is there a way to remove the new village off the Game Center and add the one I want to be saved? Thank you.
You'll have to contact the app developer for help with this.
-
i'm having to double click everything & the slide feature is not working. What's the problem? Resetting fixes it for a couple seconds then it goes right back.
i.e. If I go to open my mailbox, i have to 1st select the icon. then double tap it to open. same thing once I get to an email.At a guess, turn off VoiceOver: Settings > General > Accessibility > VoiceOver. Use three fingers to scroll.
-
after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.
additional info.
I have found the correct error definition in english.
"can not start the device (Code 10)"
I have updated my bios to the latest version.
I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
I have tried to uninstall and reinstall all webcam drivers - no luck -
I need help getting the iMessage feature to work. I've done the fix that is shown online several times and still cannot get it to work. Are there any other suggestions out there to fix this problem?
HI,
What was "the Fix" ?
Where was it On Line ?
So your iPhone is on a Wifi network ?
You have gone to Settings > Messages and Enabled Messages.
You cannot then send iMessages from your iPhone Number ?
You should be able to sent to other iOS devices that are using other iPhone Numbers or Apple IDs or to Macs that are running Messages with the iMessages account enabled and those may also be using iPhone Numbers or Apple IDs depending how they were set up.
On the iPhone in Settings > Messages you can then add an Apple ID
You can then chose to Send from the Apple ID or iPhone number as the Start from option.
Adding the Apple ID links the Apple ID and iPhone Number and if you have a Mac, and are running Messages with the same ID, they will sync (Display on all Devices) all the subsequent iMessages you receive.
9:27 pm Thursday; December 26, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
If I have another iphone and restore with my Mac, what happen with the FindMyIphone if I have two iPhone's with the same backup or sync with the same computer?
If you have more than one device on the same Apple ID, Find My iPhone will let you choose the one to find.
Maybe you are looking for
-
I've followed the instructions but can't get the ausst-server.local site to appear in my browser.
-
Hi, I have been able to setup Alert Categories, Alert Rules and Scot to receive the alerts via e-mail. I have been able to receive a few alerts into my Alert Inbox and via mail. I am using the same fault message to trigger the alert message. Now howe
-
A deski document from Infoview opens with XIR2 instead og 6.5.1
Hi all, I have in an installation BO 6.5.1 and XI R2, when trying to edit a deski document from Infoview (6.5 version), somehow it is being opened with the XIR2 version of Deski and it gives an error. How can I change it so it is opened with Business
-
Creating editable images / diagrams
Just getting into Flex.... wondering how much layout control there is when developing forms in Flex 2. Client request: Create an editable architectural diagram that allows users to input measurements by entering data directly into diagram (as opposed
-
How do you restore a password on a locked folder made in disk utility?
how do you restore a password on a locked folder made in disk utility?