Did a search, no luck! Canon D1250U USB Not recognized in OSX or Photoshop

Or Fireworks!
What do I do!?
I went to manufacture site. No Drivers for OSX!
Any ideas? Not even sure where to find it in Preference Panel!
Thanks!

I'm glad you mentioned the Canon D1250U USB is a scanner.
"...What do I do!?"
Get another scanner, or see if you can use a program like VueScan or other third party scanning software.

Similar Messages

  • HT1923 USB not recognized! HELP URGENT

    Heyy Everyone!
    I really need help!! Okay so this is the case I connected my iPod touch to the laptop Sony Vaio, and this is the first time it ever happened it says USB not recognized, doesnt open itunes or anything, yes I searched and searched did everything nothing worked please if you know how to fix this.. I tried it on couple more laptops/computers still the same any idea what could caused the problem, i used it like couple of times and left it for a month-ish oh and its 22,321,272 minutes locked and I really want to restore but really cant desprately need help

    ok, Im sorry to update this thread again but I fixed one issue and made another...
    So on another thread I read that sometimes the issue is fixed from shutting down the computer and actually unplugging it from the wall. I did that and at restart it worked! It prompted me to restore my settings and it went through and works fine now. HOWEVER... my apps are gone! I did a backup on itunes today that it loaded, but the apps are not there.... what happened?? Please tell me they are not lost.....

  • Have reinstalled ITunes correctly-after USB not recognized for new Shuffle

    New Shuffle- 1st time it says USB not recognized- Apple sends me info to uninstall and re-install I-Tunes- I-Phone is still seen- try Shuffle- first message says USB port recognized- next one says something about hardware not being installed properly. Try again and am back to the original problem- USB not recognized. Of course Apple Support is now closed- any ideas?

    DId you uninstall iTunes and all it's components? Or just the iTunes program?  Apple Mobile Device would be the main cause more than likely. So it is important whether you uninstalled all the programs or just iTunes. If so what I would try next is putting the device into recovery mode and seeing if it detects it like that.

  • My ipod 5g usb not recognized

    I cant access my ipod files through itunes & windows explore it said "usb not recognized"
    I already did all this step http://support.apple.com/kb/ts1538 , but didnt work
    I also try to delete unknown device from USB Controller and reinstall the driver , its also not worked
    I try Plug in on DFU & Recovery mode , it also useless
    Im on windows 7 ultimate 64bit

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or       
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

    S.O.S
    My iPhone 5s is not appearing in iTunes 12.
    Windows 8.1 says "USB Not Recognized".
    iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
    iPhone can charge with no problem.
    Try different cables and same problem nothing changed.
    I had tried;
    Reset and Restart iPhone.
    Cleaned the charging input.
    Tried in 3 different computers.
    I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
    P L E A S E    A D V I S E

    Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • I have got an iphone 4 and i have plugged it into my windows 8 laptop and a message pops up on the laptop saying usb not recognized, what do i have to do to make my laptop recognize my phone?

    i have got an iphone 4 and i have plugged it into my windows 8 laptop using the usb cable, and a message pops up on the laptop saying usb not recognized, the iphone doesnt say its charging or anything, how do i get my laptop to recognize my phone?

    Start here:
    http://support.apple.com/kb/TS1538

  • My iTouch says USB Not Recognized?

    I plug my 2gen iPod Touch into my comptuer and almost immediatly it says USB Not Recognized. But, when I plug it in with the newest cords it shows up just fine. Is my cord out of date? Is the one with the button release. I don't see how a cord would affect it showing up on the computer.. But it does. HELP!

    I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
    http://support.apple.com/kb/HT1808
    the showing the usb thingy on the screen part

  • When i plug in my mini, i get "USB not recognized"

    As i said in the title, when i plug this in i get the USB not recognized. I know its gotta be a problem with the ipod, as i plug in my own, it works fine, but when i plug in this one with the problem, it gets this message. Does anyone have any idea on what to do?? I could use some help. Thanks.

    Ive rebooted it and reset it, and i can not reformat it because the computer doesnt recognize it. any other ideas?

  • Zen Micro Freezes when I plug in USB cable+USB not recognized at ti

    Ok, I know you, the reader, has heard this complaint posted over and over on the Creative forums, and you would probably tell me to SEARCH THE FORUMS. Well, I did, and I found no answer or solution to my problems. So..here goes nothing.
    I recently purchased a Black 5gb Creative Zen Micro, I was really content and happy with it...that is until I plugged it into my USB 2.0 Card. The moment I do that (I've tried plugging it in into every USB 2.0 slot, and NO, this isn't a hub, but a PCI card), The Zen Micro freezes! I have to resolve this by removing the cover and taking out the battery, then reinserting the battery. At the same time my Zen Micro freezes, a little bubble pops up on my computer screen saying "USB Device Not Recognized". I'm going absolutely out of my mind here, and am on the verge of returning the Zen Micro, and might get a replacement, and if that doesn't work, just returning the Zen altogether for a refund and getting a Rio Carbon. I really like the Zen, so PLEASE PLEASE help me out here!
    Things I've Tried That Did Not Work:
    -Uninstall/Reinstalling Zen Explorer, Mediasource (basically everything on CD)
    -Updating the drivers for Zen Micro found on Nomadness.net
    -Updating Firmware for Zen Micro
    -Going into rescue mode and cleaning up, Formatting, reloading firmware, and rebooting.
    -Trying the USB 2.0 Card in different PCI Slots
    -Rotating the order in which I connect the USB cable to Zen Micro and PC
    -Uninstalling/Reinstalling the drivers, even when the Zen Micro pops up as "Unknown Device"
    -Reading tips/hints on Nomadness.net
    I have scoured the forums, and have not found anything useful or new. I know its not the USB 2.0 Card's problem, since I plugged in my USB mouse into all the ports on the USB Card, and it worked fine.
    Note: When I plug the USB cable that came with the Zen Micro into the integrated USB slots on the motherboard (USB .), it at times, does work, but even then, not a high chance of it happening. Even if I do successfully connect the Zen to a USB . slot without it freezing up, the Zen ends up not being detected by any program, like Window Media Player, Mediasource, or Creative Zen Micro Explorer.
    I am going out this weekend and am gonna try to buy a new USB Cable, and if that doesn't work, returning the cable, and returning the Zen Micro to be replaced. AND IF THAT DOES NOT WORK...GOODBYE CREATIVE! HELLO RIO! But please, any help you guys could give would be greatly appreciated. I will also try to contact Creative Customer Support, but I doubt they'll tell me anything new, if I could even connect to them without being put on hold.
    System Specs:
    Windows XP Professional SP2
    Creative Zen Micro Firmware .02.05
    USB 2.0

    Yep, that's exactly my issues to.....no matter what I've done, including replacing the USB 2.0 card which WAS and Adaptec DuoConnect 2.0 card which works fine with every other USB device ever connected to it, the Zen Micro 6g is NOT recognized by Creative Media Source or WMP. It is only recognized by the PC in Device Manager, and it has a yellow marker on it, which tells me the drivers are not installed. I know I don't need the drivers installed, but even after installing them, it tells me the drivers are not installed.
    However, the answer is: it's definitely not the Micro, since it works flawlessly on my other PC and on my Toshiba notebook. So, it's some compatibility issue on that one PC. Since I refuse to let things be, I am reformatting that PC, reinstalling from scratch with WinXP and sp2. This PC has WinXP Pro but it has other issues so a reformat is in order anyway. Hopefully, this will resolve the issues. If not, then I say it's incompatibility with the Intel 865Perl m.b. But I'm at a loss as to why it won't work when plugged into the Adaptec card too.

  • USB not recognized - even when there's no USB device at all (Windows 7, Pavilion dv7)

    Since a few days now I get the message
    'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'.
    It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..
    Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
    I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
    Anyone has any idea?
    Thanks
    HP Pavilion dv7 Notebook PC
    LE902EA#UUG
    Windows 7 64 bit
    This question was solved.
    View Solution.

    The solution can be found here

Maybe you are looking for

  • Active Directory and Open Directory not working

    I am experiencing an issue, or several issues that I can't figure out how to resolve. I have an Active Directory domain set up (running 2003 server R2) and it is humming along quite nicely. A few weeks ago I got a new XServe running 10.5.4. Booted it

  • Tax calculation with and without Frieght Charges

    Hi all, My Pricing Procedure is defined in the below mentioned way: Present Scenario:(Tax 4% is calculated on Freight Charges) Base amount = Rs.100/- Freight =          Rs.20/-                        Rs. 120/- Tax 4%  =        Rs. 4.80 Total         

  • How to number lines of text?

    I would like to number lines of text continously throughout the book. I am trying to make lines of text easier to find when my class is having discussions about the book.

  • Slow shutdowns and hangs since upgrading tio 10.4.9

    I upgraded Macbook to 10.4.9 and all is OK except for when I shutdown (as opposed to sleping the Macbook) I sometimes get hangs of=r very long delays and Inhave to manually swithc off by pressing and holding down the power switch - restart is OK This

  • SAP Upgrade

    SAP refuses to upgrade a datbase, because it contains errors during the pre-upgrade check. However this db has been working perfectly on this version. How do we  upgrade to the next version. Thanks