Did a software update, and safari won't even launch now. Crash crash crash.

This morning, my iMac ran an automatic software update. Now everytime I launch Safari 5.1.2, it immediately crashes.

Dex...
Could be a third party Safari add on that was compatible with the prior version of Safari that's causing Safari to quit.
Troubleshooting help here >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And try deleting the Cache.db file.
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder to the Trash restart your Mac, try Safari.
~ (Tilde) character represents the Home folder.

Similar Messages

  • I'm on a MacPro, Snow Leopard, 10.6.8 and did software update to safari 5.1.4. Now I can't open Microsoft Word or Skype. I've done repair permissions, restarted. How can I fix ASAP? Wish I could dump this and go back to 5.1.2! Help!

    I'm on a MacPro, Snow Leopard, 10.6.8 and did software update to safari 5.1.4. Now I can't open Microsoft Word or Skype. I've done repair permissions, restarted. How can I fix ASAP? Wish I could dump this and go back to 5.1.2! Help!

    Try this Safari5.1 from the installer package
    http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
    The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link,  it took about 4 minutes to download on my test.

  • I have an iPhone 4 and just did a software update and now my phone won't turn in. It looks like it wants me to connect to iTunes but I'm traveling and can't access my account...or don't know how. Help!

    I did a software update and cannot get my phone to turn off, on, or anything. It shows a gray apple and then an iTunes icon with a USB cable picture. I am not able to connect to my iTunes account because it's on my home computer (I'm traveling). It won't let me add my laptop because it says I have it tied to too many computers already and I can't deauthorize any of those computers because I don't know what they are, and I'm traveling. Can anyone help make my phone usable again? Preferably with contacts in tact.
    Pleeeeease!

    A drop or two of water may have been enough to cook it. If it was bad enough to prompt you to put it in a bag of rice, then I'd venture to guess it was more than a drop or two.
    Try putting it back in the bag of rice and leave it there for several days.
    If that doesn't fix it, then you're more than likely looking at paying for an out of warranty replacement.
    Water and delicate electronics don't generally get along well.

  • HT201263 it did the software update and it did the but it didnt working it pop up a code error 3194

    how did i get pass a code error 3194 I did the recovery mode and it did the software update and it was all done and it just pop up disabled again on my grandson ipad mini is there another way to get his ipadmini to work

    I have found since my above post that Apple has removed support for the Java Plugin2 in the Java Update 10 for OS X 10.5, so it won't come back.
    See:
    * [/questions/844734]
    The only way to get Java running with Firefox is use a parallel installation of a Firefox version that supports the Java Embedding Plugin and start that version for sites that require Java.<br />
    I don't know if the latest release of Firefox 3.6.x on Mac still has the embedding Java plugin.
    See this article about how to install multiple versions on Mac OS X:
    * http://www.businessinsider.com/how-to-run-firefox-4-and-3-simultaneously-in-mac-os-x-with-multiple-firefox-profiles-2011-3
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • HT4634 I just did a software update and my mail box will no longer open. Can anyone help me?

    I just did a software update and my mailbox will no longer open. Can anyone help me?

    Try opening mail, highlight your mailbox, under mailbox menu click rebuild mailbox.
    Hope this helps.
    Best

  • I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.

  • I did the software update and now all the ATV does is have a blinking light.  On my TV there was the "notes" and the new cable shown.  I tried the restart (metal remote) Menu and down button and nothing happened.

    I did the software update and after downloading and loading the ATV just hung-up with a fast blinking white light on the front of ATV.  Tried a reset with the remote - Menu /downkey and nothing happened.  Is the software corrupt or did it wipe out my ATV?

    Apple TV 1st generation or 2nd?
    I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port

  • I recently did a software update, and now all my macbook pro i7 processor does is beep and it wont start up. Does anyone have any solutions?

    Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?

    It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.

  • I recently did a software update and now I cant find any of my pictures in iphoto on my Macbook Pro. Does anyone know where or how to retrieve my photos?

    I recently did a software update and now I cant find any of my pictures in iphoto on my Macbook Pro. Does anyone know where or how to retrieve my photos?

    What software update? What model MBP? What operating software?

  • Just did a software update and now iTunes or other Mac accessories won't work?

    I did a software update for my Macbook and now iTunes, iPhoto, iMovie, iDVD and iWeb won't work. I keep getting the iTunes quit unexpectedly thing and it sends the report to Apple. Is there anything I can do to fix this???

    Download the 10.6.8 combo release from the Apple download site. Use Disk Utility (on your hard drive in applications/utilities) to repair permissions, then apply the combo release, then repair permissions again. That sometimes fixes odd system errors after a Software Update. 

  • Did Lightroom software update and now camera won't tether

    I have been using my Canon 5D Mark II tethered to Lightroom 4 successfully for quite some time. Last week I downloaded the software update and now the camera will not tether. I have tried two camera bodies and neither work. Both cameras will tether with Lightroom on a different computer (that didn't get the update). So, it's the software. Help!

    Hi
    try a safe boot - holding down the Shift key until it starts up -
    Simply performing the Safe Boot may resolve this issue.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    If your Mac starts up as expected, immediately try restarting.
    If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
    More info on what a Safe Boot does at http://support.apple.com/kb/ht1564
    also follow the rest of the troubleshooting guide at http://support.apple.com/kb/TS2570

  • Just did a software update and now my mac won't boot

    On Monday I did my Apple update, and when I tried to reboot after the update I was greeted with a circle with a line through it. I still get the moving circle on the bottom, but it never boots.
    I do not have my original install disc, but I was able to use another G4 install disc to repair disk permissions and repair the disc. After doing so, I still have the same issue.
    Any ideas would be really helpful. Thanks

    Since Disk Utility can see your drive that is at least a good thing. I am just trying to establish where you stand on booting. Normally if you can boot but experience problems then you can try Disk Utility to repair the drive, which obviously doesn't work in your case. Next is Safe mode which starts up pretty much normally but bypasses some things, and that too is not working. Single User Mode takes you to a text presentation boot stage.
    Once one starts with the stronger medicine it is a good idea to back up your data files at least in case the things you do make the drive worse. Booting into TDM makes your computer act like a giant external hard drive and gives you the chance to copy off those files, assuming your friend has the room on her computer. Then you're more at liberty to experiment with different things to get your computer up and working again. If nothing works you always have the option of reinstalling OSX. You might consider an archive and install, or if you can copy your files off elsewhere just reformat the drive and do a clean install and rebuild everything.
    It may be a case where you may have to buy a utility like Diskwarrior which does things like Disk Utility repair but much more. Or if Diskwarrior doesn't work and you do need your files you may have to let a program like Data Rescue II have a go at recovering the files (but will need an empty harddrive at least the size of the data on your computer).
    At this stage you might also start looking at external bootable hard drives, both because it might come in handy now and also because you'll be able to backup your computer in the future in case of a repeat occurrence.

  • HT5381 i did a software update and now mail wont open at all

    Help......my mail app is coming up with an error "You can't use this version of Mail with this version of Mac OS X".  Can I uninstall the update?

    !! WARNING !!
    about the September 2012
    "Security Update 2012-004"
    If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
    MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
    **BEFORE** INSTALLING THE "004" UPDATE!!
    Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
    Been through it all, already.  In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
    So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
    I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
    Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
    So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation.  So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD??  Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
    My recommendation for this particular September 2012 "004" update:
    If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT.  DO NOT DOWNLOAD IT USING SOFTWARE UPDATE !  Instead, download the actual update file itself.
    Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
    AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
    First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
    #2. Go here: https://support.apple.com/kb/DL1586
    And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
    And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
    3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
    Then, after restarting, run Disk Utility's "Repair Disk Permissions."
    Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
    THEN fire up & install "SecUpd2012-004.dmg."
    Reboot.
    After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
    And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
    Happy Mac'in!
    Kevin Kendall
    Macbook 7,1
    (Apple's very last all-white Macbook model)
    2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
    OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

  • I went to install a software update and it won't load completely

    I went to install the new software update and it still hasn't fully loaded after 13 hours

    Do Apple not realise that we do not all live in Silicon Valley or central NYC, London or Tokyo, so have to put up with download speeds measured in single digits?!
    I get 2 mb download here in the countryside, but this new iMac doesn't like that. It stalls the download anytime a passing sparrow ***** and doesn't restart unless you enter your iTunes ID. So, despite leaving the iMac overnight to download this ridiculously large 5.2 gb OS update, I'm still only 1.2 gb through - 18 hours later.
    First Apple product apart from the usual iPad and iPhone. Gorgeous computer but very, very unimpressed with the update system.

  • I have a new mail update and it won't even open, and now I can't use the old mail app either.

    I have a new mail upgrade and it won't even open. How do I fix this?

    You mean the Apple Mail app? Updated through software Update in the Apple Menu?.
    Or maybe you downloaded Mail from another source?
    Do you still have Snow Leopard or didn't you update your profile?

Maybe you are looking for

  • I don't have an aerial and got the channels throug...

    So when I signed up for BT, I asked the sales person whether I would get TV channels without the aerial. They explained that we wouldn't get the majority of freeview channels but we would get the extra channels BT give you (Comedy Central, Discovery,

  • Urgent-Importing A/R Invoices thru DTW

    I want to import the previous Invoices for a client in SAP from their legacy system. How do I do that. Please help Ots urgent. I have to do it in next two days. I am elaborating the instance. Requirement- Importing all the open A/R Invoices. The invo

  • Please HELP!  my computer is FUBAR, seriously...

    i just did a clean install of Tiger on a partition of maindrive in 2002 Quicksilver 867mHz, 1.25G RAM, installation went fine but it was very buggy. I did all the updates, incl combined 10.4.11. The most disconcerting bug was that i couldn't restart

  • Sharing Actions between GUI Components

    Hi, i have an MyPanels (JPanels) as tabs in JTabbedPane. Each of MyPanels instances has own Actions (save, copy, paste, cut). I want to put this actions in the toolbar of a JFrame. The way i do it so far, is creating "dummy" Actions for a toolbar, an

  • EFT for child support

    Hi all, I need to set up an EFT process for child support for one the states in US. can anyone please guide me what are the steps involved in this. Thanks