Did any body success to toggel Port0 and Port1 on MCB2300 board using LV for ARM?

I am trying to toggel the GPIO (Port0, Port1) on MCB2300 evaluation kit with LPC2378 uController on board using LV8.6. these two ports seems to dont have any programmable functionalities using LV. Ports 2, 3 and Port4 are working good. If any body got these two ports in working, so it will be great if you could post a functional LV or C code here in the forum.
I will be thankful for any suggestions or tips.
Greetings
Solved!
Go to Solution.

Thank you very much Gmg for
this excellent answer.
This modification makes
also a +ve affect on the I2C port0.
Where I had/have also a problem to communicate
with a slave device using I2C. After this modification the I2C-CLK works, but I
still getting no communication to my slave device. I think the problem is now
how shall I use the I2C VIs shipped with LV for ARM embedded?
I have posted this question
here:
http://forums.ni.com/ni/board/message?board.id=170&message.id=370126&jump=true#M370126
so if you could answer me
PLZ post your answer there.

Similar Messages

Did any body try to change 10g SSO login page to custom login page?

Hi..
Did any body try to change Oracle 10g SSO login page with custom login Page as we used to do in 902 and 1022 versions by changing wwsso_ls_configuration_info_t table entries?
It seems that there is now other file policy.properties that has entry for login page.
Is there any documentation provided by Oracle on this?
I checked metalink and SSO admin guide?
Any clue or glue....??
Thanks
Sarvesh

Try 1 & 2 if does not work please file a daycare for further assistance.
1. In "Day CQ Login Selector Authentication Handler" for path info add an empty row then verify.
2. Delete the existing entry for "Day CQ Login Selector Authentication Handler" , Configure your custom at repository level & verify

Did any body used 3000 to 8999 HR Infotypes

Did any body used the infotypes from 3000 to 8999.... we have recuritment infotypes 4000 - 4999 do any body used them, as per my knowledge we use only 4000 - 4005 and rest of the infotypes we use the PA infotypes. could anybody give me the exact information.

hi,
0000 - 0999 : HR master data
1000 - 1999 : HR plan data
2000 - 2999 : HR time data
3000 - 8999 : currently NOT in use !
9000 - 9999 : customer own infotypes
if you have infotypes 4*** in your system, it might mean, that someone created them (instead in the range of 9***), you might have 'some' problems by a later release.
hope this helps
ec

Did any body integrated AII(Auto Id Infrastructure)

Hi experts,
did any body worked on AII. can any body tel me which adapter can be used for integrating AII.or do we need to have proxies.
Reyaz

Hi
Refer:
AII User- and Device - Integration???
http://www.vldb.org/conf/2004/IND6P1.PDF
integrating legacy as/400 application with XI
Integrating an AII
Integrating an AII
AII 4.0 - any info?
Phases in AII Implementation
Thanks

Could any body give me the FICO and MM flows

hi, this kalyan
could any body give me the FICO and MM flows

Hi,
Check this out.
FICO Module:
Please chcek this link and go to SAP R/3 Enterprise Application Components ->
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
you will go through this link
http://www.sapgenie.com/sapfunc/fi.htm
Check this Link it out
http://www.sap-img.com/sap-download/sap-tables.zip
FI :
http://www.thespot4sap.com/IntroTo/SAP_FI_Module_Introduction.asp
http://www.thespot4sap.com/IntroTo/SAP_CO_Module_Introduction.asp
for tables check out link..
http://www.sapgenie.com/abap/tables_fi.htm
Take a look at this.
http://www.sap-img.com/sap-fi.htm
Please chcek this link and go to SAP R/3 Enterprise Application Components ->
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
you will go through this link
http://www.sapgenie.com/sapfunc/fi.htm
http://www.erpgenie.com/sapfunc/fi.htm
http://www.sap-img.com/index.htm
http://www.amazon.com/Configuring-SAP-Essential-Financial-Controlling/dp/0782125972
MM module:
http://www.sapfunctional.com/MM/MainPage.htm
For MM tables: refer
Re: MM FLOW
Reward points if helpful.
Regards,
Ramya

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

Ai changed my email for my apple id, but i can't change my iCloud ccount because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?

i changed my email for my apple id, but i can't change my iCloud account because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?

If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I need to change my iCloud e-mail to my new e-mail because my old e-mail account has been deleted and i haven't been using it for a while.

i need to change my iCloud e-mail to my new e-mail because my old e-mail account has been deleted and i haven't been using it for a while.
my new e-mail is my apple ID but my iCloud one wont change over.

If the old ID ("email address") is an earlier version of your current ID, try temporarily recreating the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have bought an iPhone4 and to be able to use it for the first time I connected into a friends itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?

I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
Now I also have a macbook where I can sync my iphone but it doesn't allow me

first of all only sync it with 1 computers itune account
second settings->general->store click the appleID box with her appleID in it and log out

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane and it w

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

Did any body use the Java API to setup a replica?

Hi, I have a similare question asked and got no response. I am wondering if there is any body used those API to setup a replica. I am able to create the replica agreement between a supplier and a consumer. But always failed to initialize the replica. The attribute nsDS5BeginReplicaRefresh=start works for ldpamodify commnad line utility but never works in the java (DirContext.bind or DirContext.modifyAttributes).
I badly need your help!

Hi,
check this..
https://forums.sdn.sap.com/click.jspa?searchID=4302686&messageID=1192366
reward if it helps..
Regards,
Omakr.

I upgraded my iPhone software yesterday and now I am getting personal hot spot. Can any body tell me why this and how to solve this problem.

I up graded my iPhone software yesterday and now I am not getting personal hotspot. Can any one help?

Did you check for a carrier settings update?
Copied from iOS: System requirements for Personal Hotspot
To confirm that your iPhone or iPad Wi-Fi + 4G can share its cellular data connection using Personal Hotspot, tapSettings > General > Network > Personal Hotspot.
If you don't see this option and your carrier supports this feature, check for a carrier settings update. If you still cannot enable this feature, contact your carrier for additional information.

Did any body success to toggel Port0 and Port1 on MCB2300 board using LV for ARM?

Similar Messages

Maybe you are looking for