Did anybody had problems with the update of logic pro x to the version 10.0.1? In my app store says that "an error has ocurred".

Hi, I have just updated to logic 10.0.1 version that has some bug fixes.
Unfortunately my app store keeps saying that an error ocurred because I left my logic open during the update process.
How can I reinstal this update?

Quit Logic and Quit the Mac App Store App
Restart your Mac
Now try again.
If that doesn't work, Quit Logic Pro X.. delete the Logic Pro X app from the applications folder and downlada and install Logic Pro X again using the Purchased Tab in the Mac App Store App.

Similar Messages

  • HT4199 Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

    Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Every time I open my itunes a message saying an unknown error has ocurred with the following number  -42110. how can I solve it?

    every time I open my itunes a message saying an unknown error has ocurred with the following number  -42110. how can I solve it?

    Hello there, lgi00.
    It can be so perplexing getting error messages when we are just beginning to launch a program. There is a pretty in depth Knowledge Base article that dives into many of the meanings to particular error numbers. See here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Under "Specific Conditions and Alert Messages: (Mac OS X / Windows)" there is the following explanation and guidelines to getting that issue resolved:
    "Error 3001,"  "-42110," or "5103"
    This alert is related to iTunes Store movie rentals and authorization issues.
    Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
    If your iTunes is up to date, remove the SC Info folder.
    Thanks for reaching out to the Apple Support Communities for finding an answer to your question.
    Cheers,
    Pedro D.

  • Viber deleted itself from my phone while it was being updated but the app store says that i still have it. How can i download viber again?

    Viber deleted itself from my phone while it was being updated but the app store says that i still have it. How can i download viber again?

    Hi,
    We would like to investigate what's going on but we will need more information from you. Please open a support ticket at this link: http://bit.ly/1aOwGy2 and a support agent will be in touch.

  • My app store says that I have two updates the buffer logo comes up for afew seconds then goes and it still doesnt show me my upgrades:( What should I do?

    My app store says that I have two updates the buffer logo comes up for afew seconds then goes and it still doesnt show me my upgrades:( What should I do?

    See this prervious discussion
    https://discussions.apple.com/thread/4738058?tstart=0

  • Installing the mavericks has been stopped--.it is saying that some error has been occurred

    installing the mavericks has been stopped…….it is saying that some error has been occurred and asking to check in purchase section.But again after resuming download it is showing the same problem....my update has been installed upto 1.5 GB and stopped..

    The CC has been charged successfully now.Please check and let us know in case of any issues.
    Regards
    Rajshree

  • The App Store say that my payment method is declined why and it was ok before

    The App Store say that my payment method is declined why and it was ok before

    Apple doesn't answer questions here. Everyone here is a user so we wouldn't know about why there is an issue with your account. If it is a bank card, then you need to check with the bank.

  • I have the iphone 5 and when I try and get new apps it says an unknown error has occurred.  The password is correct

    I have the iphone 5 and when i try and get new apps it says an unknown error has occured.  The password is correct.  A couple of times i have seen a little glitch in small lines of pixels across the screen.  Started happening about the same time.....????

    Did you read my response in your first post? Look here.
    https://discussions.apple.com/thread/4912178

  • I tryed to update to ios 6.0.1 on my iPod touch 4g but It alaways says that a error has occurred any suggestions

    I tryed to update to ios 6.0.1 on my iPod touch 4g but it always says that a error has occurred. Any suggestions.

    If you are updating via Settings>General>Software update then connect to your computer and update via iTunes
    Otherwise what is the full wording of the error message?

  • I cant download iphoto from the app store saying that it belongs to another apple id and i would have to buy it but its not giving me an option to buy it what am i suppose to do

    i cant download iphoto from the app store saying that it belongs to another apple id and i would have to buy it but its not giving me an option to buy it what am i suppose to do.

    Contact App Store support. They're the only folks who can help with account issues.

  • I am trying to download an app that needs 501 MB and my iPod has over 1 GB, but the App Store says that I do not have enough memory left.

    I am trying to download an app that needs 501 MB and my iPod has over 1 GB, but the App Store says that I do not have enough memory left.

    Do you have a question?
    That sounds right.
    Most apps require more than double the size of the app available in order for installation.
    Make more room.

  • Since logic express is discontinued, can i get the updates from logic pro for free?

    logic pro was recently priced at 199, effectively replacing logic express. it seems as though apple should allow logic express users to get the additional functionality of logic pro withought buying the entire product again.

    @Blueberry - lol I wonder if you'll sing the same tune if they discontinue logic pro and then force you to buy "logic studio" for $500 (current price 2012). See this guy's comment on the product page of the online store:
    "I have been producing music on logic since before Apple acquired it from the previous developer.
    I purchased Logic Pro 7 from Apple for $1000, and i have since spent another $500+ in "upgrades" to get to the current format of logic Pro 9. Shortly after my reluctant upgrade from 8 to 9, Apple released a promotional price of $300 for the entire program. That is just a little more than I paid to upgrade. Still no discount for upgrades though. In short loyal long time customers have now paid over $1,500.00 to get a $300 program. A slight kick in the pants for its Pro oriented customers. As a pro user you can add 7 computers, 4 iphones, 3 ipads and some ipods to that shopping cart as well.
    In that time I have watched Apple drop Key production features out of Logic in order to make room for programming codes that dumb down the DAW interface and create undesired glitches within the frame of what was an excellent platform from Emagic.
    Now that Mac has solidified its abandonment of the professional grade market by dropping the mac pro and pretty much all R&D for Logic as well, I find myself more and more disappointed with logics performance. Another product that has let go of functionality for aesthetics.
    I have, in fact, spent well over 40 hours reverting and reformatting my system back to Snow Leopard (very difficult as Mac firmware no longer supports reverse compatibility) but also reverting logic to a version of LP9 that is stable within that operating system. I had to do this as there is no version of LP9 that works properly in any operating system after SL.
    OS 10.6.8 + Logic 9.1.6/7 is the most stable combo that will run on intel based Mac. Trust me.. I tried the rest. I would prefer to go back to logic pro 7 but once again No reverse compatibility.
    Hopefully the 2software developers... Yes two... still working on logic will at least make it stable again so we can finish our mixes and move to another software manufacturer.
    Sorry Mac but after years of total loyalty you left me and the Professional market out in the cold."
    So - I already paid about $200 for logic express and now I have to pay $200 more for something I never wanted?

  • HT4972 Has anybody else had problems with this update like getting 'no service'?

    Since the update, my phone has been getting 'no service' for about a week now. My other mates and people i know have the same problem. No matter where i am, i get no service. If i turn my phone off, i may get service for a minute or two, then i have to switch off. Please sort it out apple.

    Yes, a simple search of the forums or google would have answered that question and provided the troubleshooting to resolve the issue.

  • Has anybody had problems with the global settings panel not working?

    I am on PC, Vista 64bit.  updated to the new flash player and now flash player will not allow me to chage anything in the global settings panel.  I need to allow third party content for editing wix sites and I cannot change any of the settings.  I have uninstalled and reinstalled many times and nothing has helped.
    My adobe reader also crashed and now will not load after uninstall.  Very frustrating!  Everythign worked fine before the update.
    Any ideas?

    To allow Flash Player settings, close all browser windows, then open Windows Explorer and type %APPDATA%\Adobe in the address bar. Delete the 'Flash Player' folder in there.  Do the same in %APPDATA%\Macromedia
    Regarding Adobe Reader, please post in that forum.

  • KB2509007 did not fix problem with Install Updates hanging at 0% during OSD task sequence

    Hi everybody. We recently started building our Build & Capture Task Sequence for our Windows 7 gold image. However, I keep running into the problem where the Install Software Updates step keeps hanging at "downloading updates 1 of 164 (0%).
    This is a known issue that is supposed to be addressed with hotfix KB2509007. I followed the instructions
    here to install the hotfix on my site server. I then added the PATCH= argument to my "Setup windows and ConfigMgr" step in my TS. But still my TS was hanging in the same spot.
    Then I found
    this page, which says that there is another known issue with KB2509007, and the order in which it is installed along side other hotfixes (such as R3). So I followed those instructions, and confirmed that UpdatesHandler.dll is at version 4.00.6487.2188,
    and BOOM, the updates installed and I captured my gold image. This was about a week ago.
    Well, since then, we have had a patch Tuesday, and I am trying to run by Build & Capture TS again to integrate the latest updates into my gold image, but now my TS is hanging at 0% again! I have confirmed that UpdatesHandler.dll is at the correct version,
    so I am unsure what the issue could be now.
    Does anybody have any experience with this issue? Thanks in advance for any help!
    UPDATE: I re-ran my TS, and now the updates are installing. I'm not sure why the behaviour is so inconsistent though...

    Hi everybody. We recently started building our Build & Capture Task Sequence for our Windows 7 gold image. However, I keep running into the problem where the Install Software Updates step keeps hanging at "downloading updates 1 of 164 (0%).
    This is a known issue that is supposed to be addressed with hotfix KB2509007. I followed the instructions
    here to install the hotfix on my site server. I then added the PATCH= argument to my "Setup windows and ConfigMgr" step in my TS. But still my TS was hanging in the same spot.
    Then I found
    this page, which says that there is another known issue with KB2509007, and the order in which it is installed along side other hotfixes (such as R3). So I followed those instructions, and confirmed that UpdatesHandler.dll is at version 4.00.6487.2188,
    and BOOM, the updates installed and I captured my gold image. This was about a week ago.
    Well, since then, we have had a patch Tuesday, and I am trying to run by Build & Capture TS again to integrate the latest updates into my gold image, but now my TS is hanging at 0% again! I have confirmed that UpdatesHandler.dll is at the correct version,
    so I am unsure what the issue could be now.
    Does anybody have any experience with this issue? Thanks in advance for any help!
    UPDATE: I re-ran my TS, and now the updates are installing. I'm not sure why the behaviour is so inconsistent though...

Maybe you are looking for