Did anyone else see an Arabic caricature after the IOS update flash on the white screen either before or after the "hello".

Did anyone else see an Arabic caricature flash briefly when the white screen appeared? I don't know for sure if it was before or after the "hello" greeting.

If you leave it alone, it goes through several languages in a loop.
It's character, not caricature.

Similar Messages

HT4623 I'm no longer able to take video on my iPad mini this happened after one of the iOS updates

I'm no longer able to take video with my iPad mini this happened after one of the iOS updates. How can this be fixed?

Try sliding the words up/down to select the various modes.

HT4993 Since I did the ios update yesterdayI cannot save photos (ie from facebook) they will not save in my camera roll)

Since I updated yesterday to the iOS6 day I cannot save photos (ie from Facebook) to my photos.. any help from anyone would be great.

I've noticed that with the iOS update, you're not asked if you want to allow the app to access photos or something. I said do not allow on Facebook thinking that it would upload pictures without my permission. Really this allows you to save photos to your camera roll. Now I have to figure out how to undo this....
You've been able to save photos from Facebook since at least the last update. You just touch the picture for 2-3 seconds and a menu will pop up asking if you want to save it/make profile picture/cancel/etc.

I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me?

I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?

Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling

Did anyone else's ipad2 crash with the latest update of 7.1.1?

Did anyone else's ipad2 crash after the latest update of 7.1.1?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

HT5129 Did anyone else have iPhoto just become unresponsive when it attempted to scan the old mobile me gallery?

The migration fails, it never ends and makes iPhoto unusable....did anyone else have a similar problem?

Is it the tell a friend email link that you're referring to? Can you click on the gallery link in iPhoto and get to it online? The link will contain numbers as the folder for the gallery is identified by a 6 digit number.
If it's the link in the email that gets created by the tell a friend that you're referring to you might post in the Mail forum also.
All I can think to do is go to iPhoto/Gallery preference pane and stop publishing. Then republish and see if you can get the email link to work.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Anyone else seeing a sudden uptick in SPAM making it through their Ironports?

Quick question:
We updated our C170 to 8.5.6-092 last week, and since then we've seen a massive increase in SPAM making it through our Ironport undetected.
I've read some updates here re: SBRS and repengine issues after an 8.5.6-092 update, and have investigated these (both are OK) but nonetheless I am curious if others are seeing the same thing.
What I'd like to know is if these are just a new spam campaign that is making it through the Ironport filters, or if we have an actual technical issue after the 8.5.6-092 upgrade that I'm missing.
Current status:
Rule Type    Last Update    Current Version    New Update
CASE Core Files    Tue Sep 30 12:22:51 2014    3.3.1-009    Not Available
CASE Utilities    Tue Sep 30 12:22:51 2014    3.3.1-009    Not Available
Structural Rules    Mon Oct 6 08:08:52 2014    3.3.1-009-20141005_221700    Not Available
Web Reputation DB    Mon Oct 6 01:18:29 2014    20141006_081308    Not Available
Web Reputation DB Update    Mon Oct 6 09:18:56 2014    20141006_081308-20141006_161553    Not Available
Content Rules    Mon Oct 6 10:06:11 2014    20141006_170304    Not Available
Content Rules Update    Mon Oct 6 10:06:11 2014    20141006_170501    Not Available
In general, we're seeing spam with the following characteristics:
1) many originate from, or contain links to, .link domains
2) SBRS on these are clear (-1, -2) and gets a pass on the SBRS check
3) Sample subjects:
SENDER:    [email protected]
SUBJECT:    Exclusive: Enrollment Plans from Blue-Cross, Humana, and AARP.
SENDER:    [email protected]
SUBJECT:    Re: Someone has run-a-background scan on you. See-your results #190860649
SENDER:    [email protected]
SUBJECT:    Alert:Someone ran your background-scan. Read the results #1609820.01
SENDER:    [email protected]
SUBJECT:    Ford Cuts Prices to Make Quotas.
SENDER:    [email protected]
SUBJECT:    Website May Expose Your Arrest Records. (see details)
SENDER:    [email protected]
SUBJECT:    Re: Your background-report may have been viewed on 10/03/14
4) Furthermore, many contain .link URL's in the content, and the newly added URLscanning seems to be giving these a total pass, too.
Some samples: http://signupnow.growingmedicareprovider.link , http://detailshere.largelycarsavings.link etc.
We're playing wack-a-mole with individual rules for subjects and .link domains, i.e. to flag and quarantine these as they come in, but I'd like to know if anyone else seeing this, or just me?
-b

Hello Bryan,
Ideally for us to diagnose if there is a possible fault in your IronPort or with misconfiguration we would need you configuration file, complete message tracking information and also the actual samples which are passing the device.
Thus i would like to recommend you to open a Cisco TAC case with us so we can be of assistance.
In terms of the information provided (there maybe some other variables to consider as well).
I would suggest firstly running this command on your device if not already done.
CLI > updatenow force
Let the systems update all services again.
Continue to monitor.
These server IPs if they continue to send such emails their IP's will hit a blacklist.
However at this point, there are too many variables in place that can affect the scanning of these emails and reasons why they're passing.
EDIT:
8.5.6-092 revision corrects the SBRS connection that was witnessed in -074 as per the release notes.
Regards,
Matthew

T420s parts delay...anyone else seeing this

We have a 1 month old t420s that had the mainboard die (wil not power on, power button just slow flashes) We where just told that Dec. 24th would be the earlest the parts depo would have the mainboard!! Anyone else seeing this type of delay? This is a laptop on a Next Day on site enterprise contract. Having a user down for that long is nuts.

hey djcam,
welcome to the forums and apologies for the inconvenience caused by this.
could you pm to me the following
Name:
Country:
Mobile:
Email:
MTM [machine type model]:
(To locate MTM - http://support.lenovo.com/en_US/FindProductNumber.page#find)
Serial Number (S/N):
Date of Purchase:
Case/Order Number : (if any)
Screenshot of Error(if applicable) : (upload it to a hosting site and paste the link here)
Location of unit : Home / Repair Center (delete where appropriate)
Description of issue :
Troubleshooting Taken : (if any)
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Colorpicker behavior: anyone else see this?

I'm just sampling what should be straight grey, and I get much more saturated samples than should possibly be represented in the image.
I'm seeing this behavior in Photoshop CS5, ATI 5700 video card, latest drivers, Win XP Pro SP3. I see this with or without OGL acceleration. I see this with the modal eyedropper, or with the selected eyedropper tool. Anyone else see this?

I tried to duplicate just what you did. It doesn't paint any color for me - the picked colors just paint shades of gray.
I noticed that your brush doesn't paint all the way to the edges. Specifically, it looks as though you're getting an "all or nothing" coloration, and the size of your brush "footprint" is varying during painting... Is this some kind of brush dynamic at work? I don't use a tablet myself.
Something's definitely acting funny there, and I'd say it could be in the brush settings or behavior of the brush rather than the picker (or both).
I have an ATI 4670 by the way, on 10.11 Catalyst.
-Noel

Does anyone else see a blue screen just before leopard loads up?

Hi just wondering Does anyone else see a blue screen just before leopard loads up? It when i start my cpu after the apple logo and spinning wheel, then it goes to a blank blue screen for a second, then the desktop. Just wondering if that was normal. Thanks

Yes, it is normal for a Mac to have a blue screen during start-up.
You may also see it change colors from blue to gray.
-Mike

Aperture and DNG. Anyone else seeing this?

I shoot a lot of RAW images and some of them on a camera that is not currently supported by Aperture (Panasonic DMC FZ8). When I convert those RAW images to DNG, Aperture displays them perfectly in the import preview. When I import them to a project, Aperture displays them for a few seconds. Then they disappear only to be replaced by the usual blank red image placeholder and the message "Unsupported Image Format". If the program can display these images for 5 or 10 seconds why not permanently?
Anyone else seeing this? If so is there a way to manage these images in Aperture? I like the program, but it's difficult using one app for RAW images and another for the rest. Any news (rumors) as to when Apple may be updating the supported camera list?
Thanks
Joe

Aperture only supports DNG from cameras that it supports the RAW file from, so your Panasonic DNGs are not supported. What you are seeing is simply the embedded JPEG that flicks on until Aperture realizes it is not a supported file.

Anyone else seeing better-than-ever speeds?

I was reconfiguring an old Win XP laptop this evening and when I was about done I ran a test on speedtest.net to see how the configuration was performing. I was surprised to see better than ever download speeds. I ran the same test on my Win 7 desktop machine and got the same results and then almost exactly the same numbers on the FiOS speedtest.
Speeds were: 43.12 Mb/s down; 31.96 Mb/s up.
I'm paying for 35/20. I've always seen better than 20 mb/s up but my downstream has always been consonantly right at 35 mb/s. I'm sure not complaining, but I'm curious. Is anyone else seeing this spike in downstream? And can anyone speculate what might be behind it?
edit: By way of a further test I just download a 699 MB Ubuntu distro file. The download ran under 2 minutes at a rock solid and steady 5.3 MB/s. Whew. I like it.

Yes I was wondering about this too. i am getting over 30mbps download on my 25/25 connection. Good job verizon, you guys are looking like a pretty cool company now.

Anyone else seeing this - iDVD 08 *sometimes* can't recognize a superdrive

Anyone else seeing this - iDVD 08 sometimes can't recognize a superdrive in my 1-month old iMac
The error is "Your Macintosh does not have a supported SuperDrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc."
Funny - it never said ths with iDVD 06
I'm seeing this about 20% of the time when opening iDVD.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
Serial Number: W87239PKVUX
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

Full screen playback in PE9 garbled - anyone else see this?

I mentioned this in a general post but I'll make it a specific question now -
When I click on the "full screen" button near the top right of the interface, full screen playback has a corrupted area which corresponds with where the timescale is on the normal interface. Sometimes the playback cursor "breaks through" as a black vertical line too.
Does anyone else see this?
I have the latest Nvidia drivers installed. Windows XP Pro SP3 Q9300 quad core PC 2GB memory.
Thanks for any observations.

It's very obvious if you do have the problem - a wide strip of the video (horizontal, matching the timescale hidden beneath the full screen display) gets shifted sideways somewhat (flickering on and off), so that any vertical object in the footage gets displaced sideways at that point in an obvious juddering fashion. I tried to do a screen grab but simply doing that makes the problem change - it is more evident when the footage is running than when frozen.
Anyway, adjusting the Windows Display Properties "hardware acceleration" slider, moving it to the left till it is set to the point where the message beneath reads "Disable all DirectDraw and Direct3D acceleraions. Use this setting to correct severe problems with DirectX accelerated applications" seems to fix the problem.
Graphics card is a GeForce 8600 GT, in case that's relevant.
At least I know how to work around the problem. Let's see if others come across the same problem in due course. Maybe it's just a local issue.

I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone. Is anyone else seeing this?

I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone 6Plus. Is anyone else seeing this?
The other sections of the iTunes store seem to have errors as well.

I've seen a couple of other threads in the last 10 minutes posting about problem with the store, both have now replied saying that it's working again for them - you could give it another go and see if it's now ok for you

Did anyone else see an Arabic caricature after the IOS update flash on the white screen either before or after the "hello".

Similar Messages

Maybe you are looking for