Did anyone elses D.O.T. Dissapear with upgrade

for some reason when i upgraded my drivers the Dot thing dissapeared how do i get this back?

well an OC is an OC .. period.. whatever GUI you use is irelavent when you consider its the driver that overclocks speeds.. not a Graphics user interface.. as far a safer .. well safer is as safer does.. if you crank your core to 500 your pushing the envelope , if you push the core up from 390 to say 425 , and up in little increments , paying attention to the ambient temperature in the case northbridge and cpu ect.. youll be fine.. and if your really lucky youll be able to monitor the heat on the GPU istelf {anything but an XT}.. which should keep you safe as long as you can see clearly :}:}
Oh ya .. If you upgraded your drivers form nvidia and used them and cant see the DOT of MSI clock screens .. thats a GOOD thing.. if it was there or a portion of it was.. i would be worried about a messy registry regarding vid drivers.. Keep it Clean and Mean.. for performance and reliablilty..

Similar Messages

Did anyone here had a problem with screen resolution or brightness when upgraded their ipad to ios7?

I had a mini ipad and upgraded it to ios7 last night. And when I woke up this morning the screen of my ipad had those lines like in an old black and white movies and I can't almost see the apps icons. It is almost a white screen. And after 5-10 minutes it statrted to be clear again. Did anyone had the same problem?

EilaJA wrote:
I then followed instructions for restore with my macbook air, but each time i tried, itunes told me either the ipad needed the passcode entered
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
EilaJA wrote:
...or it encountered and unknown error (9).
See Error 9 here > http://support.apple.com/kb/TS3694

My iPhone randomly turns off by itself with battery remaining. I can turn on the iPhone by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!

Did anyone try Ipad2 with another SIM ?

hi,
did anyone try Ipad 2 With another Carrier ? Anyone bought 3G ipad with at&t plan and use it with another carrier ?
i need to make sure before i buy it.

05-May-2007 07:32 PM
nboy wrote:
I try to installed Text-To-Speech program into my N70 but it show "File Corrupted" what wrong with it? I wanted to know it's because the program or my phone.
not all phones support Text to Speech...
1st, you can not install "Text to Speech", this is built-in to the system the only thing you can add are the the different "voices", hence if your phone does not originally support Nokia's Text to Speech, you will not be able to install it, however if i am not mistaken there are 3rd party software that does "text to speech"... goggle nokia mobility for more info...

Did anyone else's ipad2 crash with the latest update of 7.1.1?

Did anyone else's ipad2 crash after the latest update of 7.1.1?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

So did anyone hack the iPad and made it work with Flash?

Hello Dudes & Dudettes,
I basically need to write a Flash game that would work through the Safari browser on the iPad.
Did anyone try to re-write the Adobe iPhone packager and make it work for the iPad? I am curious... ?
Also anyone knows if it is possible to hack the browser in order to use the standard embedded flash code?
I hate using the Xcode SDK, mainly because I am not that good at C++, and basically AS 3.0 would be ideal for me to develop for the iPad.
Help is much appreciated!
thanks,
Dave

comex has a new project you may want to follow http://www.youtube.com/user/Xuzz149#p/u/0/adouTnXgelE

Has anyone successfully tethered a Nikon D7000 with Aperture 3.1?

Hi,
I have a new Nikon D7000 and tried to tether it to Aperture 3.1. Aperture recognizes it as a D7000, but I can't get an image to display. I'm outputting JPEG right now and can wait until RAW is available, but it would be convenient to tether so I can get immediate feedback on the image while I'm shooting.
Has anyone had success tethering the D7000 with Aperture 3 or is the software not there yet? I'm talking about having the image immediately downloaded to the iMac and automatically displayed after you take each photo, not downloading at the end of the day.
Thanks

UPdate - the key was opening a new project in Aperture 3. Once I did that, Aperture recognized the D7000 and I could shoot from the camera and have it displayed immediately on the iMac.
It works right out of the box. Yea!!!
Message was edited by: luckyphoto2010

I just upgraded to the 5s but the sales lady did not restore from my last backup with my 4s. How do I get my pictures and settings restored?

I just upgraded to the 5s but the sales lady did not restore from my last backup with my 4s. How do I get my pictures and settings restored? I cannot seem to get it to give me that option. Can anyone tell me what to do? Thanks so much!

If the phone has already been set up, you will need to go to Settings > General > Reset > Erase All Content and Settings to be able to go through the setup again. This time use Restore from Backup.
This will walk you through the setup screens:
Getting Started and Get-Started Apps

Did anyone used GnuMICR in check printing?

Did anyone used GnuMICR.ttf freeware font in check printing? Please let me know your comments on this font. Do you know what is the best website that can provide commercial MICR font.

I've got a client that's in production with it, it was acceptable to Bank of America. I'm working on another client and will be trying it shortly with JPMorgan Chase. Just order yourself a glardon guage online if you don't have one already from your bank, that'll help you place the MICR on the check template.
Regards,
Glen

Did anyone analyze the Pro's and Con's between BPM Suite & ORACLE BPA+SOA?

Hi,
Did anyone work on the comparison between Oracle BPM Suite which is enhanced version of AquaLogic BPM, and the Oracle BPA Suite+ SOA Suite?
regards,

Create a new user oracle and proceed with the installation
--> useradd -g oinstall oracle
If your are forwarding your GUI using xming or vnc you would need to copy the xauth of root user and set it to oracle
[server1:root] xauth list
bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e
[server1:root] sudo su - oracle
[server1:oracle] export DISPLAY=localhost:10.0
[server1:oracle] xauth add bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e

Did anyone tried Rejection Message Handler via Queue based method?

Dear All,
I am presently doing a Rejected Message Handler process and successfully implemented with File based and Web Service based. But I am not getting the clue for Queue based. We can enqueue the rejected message into queue as a JMS message via this method. But the URI format they have given is *"jdbc:oracle:thin:@<host>:<port>:<sid>#<un>/<pw>#queue"*. Format includes jdbc connection string along with queue name. For this I have created JMS module with JDBC Persistent store and created queue in it. But still I am not able to enqueue the message inside the queue. Also, is there anyway to see the queue names inside the DB. Did anyone tried this method? Could you please share the info??

WL JMS Queue consume>BPEL1 (One way) invoke>Mediator service (one way) route> BPLE2 (one way). Also I have added transaction properties in BPEL1 and 2 + References + Services.
Now, if there is a fault in BPEL2 the transaction should be rolled back in BPEL1 and the message should be seen in the WL queue itself. But that is not happening in my case. Everything is getting rolled back upto a point just after the >recieve activity in BPEL1 except the message is not getting rolled back to queue.There will be 2 transactions in this scenario : 1) jms queue to soa hydration store 2) soa-hydration to bpel execution.
This is the behaviour for 1 way or async interfaces , jms adapter thread completes its transaction work after persisitng to dehydration store and another bpel system thread starts work executing the bpel code after retrieving the message off the db in a separate transaction. So the rollback you are seeing is only applicable for 2nd transaction which roll backs to the dehydration store instead of the queue.
For synchronous interfaces, the same adapter thread will be involved for complete message processing including bpel code execution. So I think if you want to get the jms queue within the same transaction you can try set up the interfaces to be sync, even with dummy responses. This might make jms adapter thread to start a transaction --> read message off queue within the same transaction --> execute bpel code within same transaction --> complete/rollback transaction based on bpel code execution.

Did anyone else have their phone reset after trying to update?

I had the same problems as most doing the update last night, then suddenly my phone came up with the plug into iTunes symbol. Even when I updated it stayed with that symbol, like t was stuck.
Eventually I managed to get it to reset, but it didn't restore from the backup so I lost everything. :(
How do I get it to restore from backup? Or have I lost all my photos?
Did anyone get this problem?

I'm experiencing a similar problem. My thunderbolt external drive (Lacie) and my external video card (TripleHeadtoGo) are both unrecognized. The Matrox troubleshooting tools say it's not even connected...
Resetting PRAM and SMC worked one time, but the next time my mac went to sleep, it lost the connection again, and I've now down several resets & reboots, and I've still got no thunderbolt connectivity. Very frustrating.
Avoiding bad updates is part of why I switched from Windows to a Mac.

My Ical is not pushing - is anyone elses?

My Ical is not pushing to my cell- is anyone elses?

Still does not work. if I add something to my laptop it shows up maybe hour or so later on my cell if at all. I have everything set up properly.
I hate to say it but it looks to me as all they did was change the .mac logo to a .me and otherwise whats the difference?
Doe sit instantly push for you to your cell? I bet not

Anyone else get a NX6800 TD128 with GDDR3?

I did. When I got it back from Rma, I didnt notice the box, i paid more attention to puttin it back in my system so I could be playin again. Last night I noticed it said "128mb DDR3" on the box. So today, I found a program to determine specifications and sure enough, I've got GDDR3 memory. I guess that explains why I can get it up to 350/950. Just curious, did anyone else get GDDR3 on there 6800nu?

that´s the gift from MSI,everyone who have problem with this card,just send it to RMA headquarters and they give you DDR3.but also you can´t say everyone you get it.it´s secret.they wanna you as a potencial customer again and that is the reason.but as i now you must pay a shipment to them,but it´s still less money than the 6800 GT or ULTRA costs,and with DDR3 you can have it from this card.......very good.....i wanna problemous 6800non-u

HT5129 Did anyone else have iPhoto just become unresponsive when it attempted to scan the old mobile me gallery?

The migration fails, it never ends and makes iPhoto unusable....did anyone else have a similar problem?

Is it the tell a friend email link that you're referring to? Can you click on the gallery link in iPhoto and get to it online? The link will contain numbers as the folder for the gallery is identified by a 6 digit number.
If it's the link in the email that gets created by the tell a friend that you're referring to you might post in the Mail forum also.
All I can think to do is go to iPhoto/Gallery preference pane and stop publishing. Then republish and see if you can get the email link to work.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Did anyone elses D.O.T. Dissapear with upgrade

Similar Messages

Maybe you are looking for