Did anyone have issues trying to watch or even see the final game of the playoffs this morning on the nhl app?

Hi
I've just purchased the apple tv.
I mainly purchased it for the NHL as I was fed up watching hockey via my mac on my tv.
I am using unblock-us.
This morning I wanted to watch game 5.
I switched on the apple tv, went to the nhl app and selected todays games, it gave me the option for last nights/early this mornings game.
I selected the game, but it did nothing. It did not give me the option for the game, condensed game or highlights.
In the end I found the game via the NHL on my mac and watched it on apple tv via my mac.
I checked just an hour ago and now the three game options are available to watch via the apple tv app.
Did anyone share a simular issue?
Does anyone have any good tips for using the NHL app on Apple tv? Would be nice to know in advance for next season.
Thanks in advance.

Jennere wrote:
I am using unblock-us.
There is most likely the issue.

Similar Messages

  • Did anyone have issue connecting iphone to computer

    When I try to connect my iphone to the computer, it shuts my computer down. However when I connect my ipod, I don't have any problems. I called the apple solution center and they told me uninstall itunes and re-install it. I did it and still had the same problem.  So they said it was my driver however, the ipod shows up so it can't be my driver.

    Thanks for your suggestion.
    I have uninstalled & reinstalled the webcam drivers (and other Creative software), and upgraded to the latest drivers/software for it, and unfortunately the problem is still occurring.
    Does anyone have any further suggestions?

  • Did anyone have issues with losing their ringtones when updating itunes?

    I lost all my ringtones when I updated my itunes. which is not good because i cant redownload them. Anyone know what happened tried to restore old backup and they didn't restore that way either.

    Hi WolfStorm102,
    Welcome to the Apple Support Communities!
    I understand that your ringtones are missing after you performed an update to iTunes. You are correct that ringtones cannot be re-downloaded from the purchased section of the iTunes Store. In this situation, you may need to either use the report a problem link with your purchases or contact iTunes Store support. You can use the following article as a reference.
    Download past purchases
    http://support.apple.com/kb/ht2519
    Get help
    You may find the answer to your question below:
    If your download was interrupted, learn how to resume the download.
    See what to do if you have trouble using an app.
    Make sure your computer is authorized using the Apple ID that you used for the original purchase.
    Make sure your iPhone, iPad, iPod touch, Apple TV, Mac, or PC is associated with your Apple ID.
    Make sure you’re in a country where iTunes in the Cloud is available.
    If you’re having trouble downloading an item, make sure you can download the item again from iTunes in the Cloud. You may want to sync the content to another device instead.
    If you can't find the item that you purchased in the iTunes Store, report a problem with the item. You can report a problem with a purchase made within the last 90 days.
    If you have a problem with an older purchase, contact iTunes Store support.
    The last two bullet points would apply to your situation with the ringtones.
    I hope this helps,   
    -Joe

  • Anyone have issues with their ipad staying connected to the Internet using an arris-5e12 router? I seem to be getting kicked off the Internet frequently

    Anyone having trouble staying connected to the Internet using an Arris 5e12 router.?

    Are you in an area where it doesn't pick much wifi signal up. If yes try to move your device nearer to the wifi connection box

  • Hot mail is not working after firefox upgrade. I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week .

    I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week after firefox upgrade. After entering login the page freeze. I am not able to continue.
    I reviewed the thread. I am not using Foxit.
    I reviewed hot mail forum. They suggest firefox upgrade causes this issue.
    I tried after clearing my browser's cache and cookies. The situation remain same. Any idea?
    What is the workaround?

    Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

  • I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

    I have a Tritton TRI-BC200 hands free device that my iPhone 5 no longer "sees" on Bluetooth, so, I cannot pair the device. Anyone have a suggestion? Tritton no longer supports the device.

    I had this problem and what I did was: read the user manual. I was actually using the wrong buttons to put the Tri-BC200 on pairing mode. I also boot my I phone. Everything worked OK. Regards.

  • Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

    Hi Guys and Gals.
    Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
    I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
    However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
    Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
    Regards,
    Jase

    Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
    Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not.  They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
    Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job.  I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
    It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
    Two and a bit years is a long time in tech terms.
    Stephen
    eni wrote:
    I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
    Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
    SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

  • Does anyone have issues with start up time

    does anyone have issues with start up time

    Have you tried a reset?
    Press & hold both Home & Power until you see the Apple logo.
    If that doesn't fix it, restore it as new and see if that fixes it.

  • Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Only concrete way is to use it less sorry see here every method possible has been tried
    https://discussions.apple.com/thread/4329696?start=2970&tstart=0

  • My iPhone randomly turns off by itself with battery remaining. I can turn on the iPhone by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

    My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

    When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!

  • I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the i

    I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the image of the radio two times. How can I DO THIS!?!?!?! Thanks!

    In Editor, go to the expert tab.
    Open picture B, the one you wish to select the radio from to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position object from picture B.
    In the layers palette you should see picture A as the background layer, and the radio B on a separate layer.

  • Does anyone have issues opening itunes? each time i open i'm shown the 'agreement' box

    Does anyone have issues opening itunes? each time i open i'm shown the 'agreement' box and have to click on agree, then set up my page each time

    mandpw wrote:
    I'm running McAfee, but this is a brand new problem.  Never happened until last ITunes update.
    because McAffee doesn't like the new iTunes update.
    Post over in their (McAffee) support.

  • Trying to watch a movie on the television that I have downloaded on the computer

    trying to watch a movie on the television that I have downloaded on the computer ~ cannot get it to transfer

    There is nothing to transfer.
    Simply select the movie under the Computers option on the ATV.

  • Did anyone have saplogon.ini on another directory than c:\windows and how t

    Hi
    Did anyone have saplogon.ini on another directory than c:\windows and how to change it?

    Hi Tina,
    you can also put it in
    C:\Program Files\SAP\FrontEnd\SAPgui
    Cheers,
    Stefan.

  • Did anyone have success applying the invisible shield to their ipad?

    Did anyone have success applying the Invisible Shield to their Ipad?

    Yes.  Make sure any iPad Cover that you have for it is removed first.  Then, start at the bottom where the On/Off button is.  Peel off only a small section of the bottom of the invisible layer and attached the small exposed sticky side to the bottom of the iPad.
    Line it up as best as you can.  Placing the edge of the iPad against a flat surface like a wall or backsplash on a kitchen counter can help you to keep the invisible sheet "square" with the iPad surface.
    Was that a confusing answer?

Maybe you are looking for

  • Recording to DVD from DVR

    I used to have Bright House, when a progeam was finished being watched on the DVR an option was to "Record to VCR." (We used the DVD recorder). There is no option like this with FIOS. I called Verizon support (HAHA) and the agent told me - get this -

  • All my songs and videos gone after app transfer to my laptop (iOS 5.0)

    All my songs (about 1800 songs/12GB) and videos (10gb) have disappeared while two of my apps, Asphalt 6 and Real Racing 2 were being transferred from my iPod to my laptop. I guess they were being transferred since they have been updated and I haven't

  • Wired mouse causes screens to move about

    I've read problems with mouse cursors that move randomly. My problem is that the screens I'm working on jump around randomly when I touch my wired mouse. I've dis- and re-connected both mouse and keyboard; I've also changed mouse settings in System P

  • Creative MediaSource Go! software updat

    I've scanned the postings and can't find an answer to this. How do I update Creative MediaSource Go! to a newer version? I was viewing the other updates available for my system, I saw that the CMS Go! version needed to be 3.0 or newer. I have .0.26.0

  • Want to install a free trial

    I downloaded a free trial for Adobe InDesign today on my Mac (OS X 10.9, Mavericks). I wasn't able to install the free trial as it only gave me a perpetual beach ball. I trashed the file and now I can't download the free trial for Adobe InDesign at a