Did anyone have trouble getting the Upgrade to a 6 Rebate?

I upgrade my Iphone 4 for the Iphone 6 promotion and as of today have not yet received my Rebate. I had to call again today and the guy told me it would be another 15 days for a response to see if I was even going to receive! Not sure what's going on but I sure could use that rebate to pay my bill.

    Ensuring you receive your mail in rebate is very important Vince-jessie. Congrats on your recent upgrade to the iPhone 6. Did you mail in your rebate? For faster process you may also submit your mail in rebate and check the status online at www.verizonwireless.com/rebates. What was the reason you may not receive your mail in rebate?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Similar Messages

  • Did anyone have luck getting the $200 SMARTPHONE recycling credit promo?

    I purchased 4 smart phones on Black Friday and was promised by the Verizon store rep that I would receive $200 for every smart phone turned in to the recycle program through a promo code that would be emailed to me in a "few days" but then never received the codes. I have visited the store where I purchased the phones and received more promises but.... so far all I've gotten is the run around and confusion by Verizon. Has anyone made it through the gauntlet to receive the codes?  Bait and switch?

    Been on the phone twice over the last two days with the recycle folks but they know nothing about the $200 smart phone turn-in promotion.  They did give me some promo codes that were good to bring the value of the phones I am turning in up to $100 but still not the $200 I was promised at the dealer.  I did finally reach someone at a "no kidding" Verizon owned store (some stores say Verizon on them but are actually just "authorized dealers") who told me that she would personally handle the phone turn ins if I bring the phones in to her.  I'll do that on Monday and post the results afterwards.

  • Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Jon....
    Don't confuse the threads here with 'typical' experience.  Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
    If you are having repeated crashes it is really pretty basic.  You either have a physical problem with your pad, or you are using too much memory.
    The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now.  That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.  
    This happens, more often than not, when using safari with multiple windows open on graphic intense sites.  It can also happen with a memory intensive game, and residual apps in the background.
    Double  tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
    If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

  • Does anyone have trouble serializing the enterprise version-education?

    Does anyone have trouble serializing the enterprise version (education) by any chance? We can't seem to serialize using the serializing tool. the CC 2014 reverts to a trial...

    Jon....
    Don't confuse the threads here with 'typical' experience.  Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
    If you are having repeated crashes it is really pretty basic.  You either have a physical problem with your pad, or you are using too much memory.
    The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now.  That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.  
    This happens, more often than not, when using safari with multiple windows open on graphic intense sites.  It can also happen with a memory intensive game, and residual apps in the background.
    Double  tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
    If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

  • I have trouble getting the scrubber bar to show. How can I get it to show on my screen?

    I have trouble getting the scrubber bar to show on my screen. Sometimes it's there and sometimes it's not. How can I get it to show on the screen whenever I want. Nothing in my manual answers that question.

    The Users Guide says:
    Additional audio controls
    To display additional controls, tap the album artwork on the Now Playing screen. You can see elapsed time, remaining time, and the song number. The song’s lyrics also appear, if you’ve added them to the song in iTunes.

  • Did anyone have success applying the invisible shield to their ipad?

    Did anyone have success applying the Invisible Shield to their Ipad?

    Yes.  Make sure any iPad Cover that you have for it is removed first.  Then, start at the bottom where the On/Off button is.  Peel off only a small section of the bottom of the invisible layer and attached the small exposed sticky side to the bottom of the iPad.
    Line it up as best as you can.  Placing the edge of the iPad against a flat surface like a wall or backsplash on a kitchen counter can help you to keep the invisible sheet "square" with the iPad surface.
    Was that a confusing answer?

  • I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge.  Did not have trouble until I upgraded to mavericks.  I have a mac book pro, 10.9.1, iMovie 10.0.2.  Says it is recording, but when I go to check, it says the file is empty.

    I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge.  I have been successful doing this in the past, but now it is not working.  I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2.  Everything in iMovie looks like it is working.  It reads "recording" in the upper left hand corner of the pane while the video is playing.  When I stop the process to check on my clip it says that the file is empty.  The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously.  My system is about one year old.  Any suggestions?

    Hey, Clinton,
         Thanks for your help!  I was able to go to iMovie 9.0.9 and import video.  I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support.  They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded.  That didn't change anything.  In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge.  But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2. 
         1.  Open iMovie 9 (finder/applications/iMovie 9.0.9
         2.  Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
         3.  Close iMovie 9
         4.  Open iMovie 10 (probably in the dock)
         5.  File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events.  Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.) 
         6.  Select the clips and import.  Click the blue "Import Selected" button on the bottom right.
    You may get a message that some files cannot be imported.  Click continue import.  It's a little glitchy.  It imports your clip, and also makes a copy of it, too.  On the copy, the audio is normal, but the video is choppy.  In any case, you would delete the copy, anyway.
    Hope this additional information helps somebody else.  Thanks again, Clinton for helping me!

  • Does anyone have trouble with the latest E71's fir...

    I' ve just upgraded my E71's Firmware, now i get in trouble with this FW. There are some problems:
    1. My device always auto restart 
    2. When i'm charging my E71, sometimes, it appears a message " Simcard not available"
    3. My E71 is full charging but after one day it need help with a message " low battery "

    I don't get any of those problems and been running the 300 for many months.
    What I suggest you do, is BACK UP YOUR PHONE BEFORE YOU start formatting and erasing!
    Then, reset or reformat your phone as described by the previous poster, additionally it could be something in your backup thats causing the problem.
    Second, instead of reformatting the handset you can reflash the SAME firmware to the handset again with NSU, there might have been a problem when it copied it into the flash memory (unlikely as it has a checksum) however you cannot rule that out.
    If its having SIM card problems - it could be related to this:
    /discussions/board/message?board.id=topfaq&thread.id=119 OK it says memory card, but could be a similar issue.
    Additionally you could charge or get the battery from another phone and allow yours to discharge it to until the phone switches off.
    I would at least reflash the firmware myself again, I have seen a difference with handsets when this is done. Why? I don't know.
    Shunts...
    Message Edited by shuntfield on 15-Nov-2009 02:14 PM
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Anyone have trouble getting verizon to port a number?

    We are going on a month now trying to get verizon to port a number from cox cable.
    When called they said they have it all under control and will be done by a certain date.  When that date arrives we get the same email..
    "Thank you for recently placing an order with Verizon. Unfortunately, we need additional information to process your order. To avoid any service delays, please contact Verizon as soon as possible and reference order #"
    I don't understand what advantage it is to them to give customers the runaround and tick them off.  What are they trying to accomplish?
    And one other odd thing, everytime we ask them what the status of the "number port" is, they reply, oh you mean the "winback".  What the blue blazes is a "winback"?   And they want to argue with us that it is not called a port and is instead called winback.    Funny,  every other phone vendor calls it a "port".    go figure!
    The winback certainly isn't living up to it name.   They are about to win me right over to time warner.   
    I'm sure TWC will be just a dumb, but they are a lot cheaper.
    Verizon, Wake up!   You have one more chance to get this right before I file the complaint with the FCC.
    Here's the link for anyone else in the same boat.
    https://consumercomplaints.fcc.gov/hc/en-us

    Welcome to the forums.  You're talking to other customers here.  If you want to get a message to Verizon you need to call or chat with them.
    I recently help a family member port a number out of Verizon to a VoIP provider (a "loose away," perhaps?).  Verizon was horrendous to deal with refusing to release a never agreed to port freeze even after many orders were placed and promises made.  An FCC complaint is what finally sped things along.  I wouldn't wait to file one.
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Does anyone have trouble with the cursor changing lines in Apple Mail when pressing the letter '

    Since installing the Yosemite update, when typing an email in mail, the cursor changes lines when I press the ' key.  Eg: the word don't becomes don'
    t
    Is it a setting or a bug?  Help???

    Hello,
    Does anyone have an interface program for LabVIEW and any of the Campbell Scientific data loggers?  The file on this forum by Frank appears to be corrupt.  Any help is appreciated.
    Thanks,
    Eric

  • Does anyone have trouble with the screen disappearing while making a call and trying to turn the speaker on?

    I have to use the speaker portion of my phone whenever I make or take a call.  Sometimes the screen goes out as I'm trying to hit the speaker button. Does this happen to anyone else? And any suggestions how to stop this?

    The iPhone is designed to have the screen go dark during a phone call, since the phone is normally up to your ear and you would not want to be touching the screen with your ear and possibly touching random buttons. This is done by the proximity sensor, which is located near the ear speaker on the phone. When you are reaching to turn on the speaker, it is possible that you are crossing this sensor light and it turns off the screen. I have done this before. If you try reaching from the bottom of the screen, does this still happen? Try to keep your hand away from the top front portion of the phone and see if that helps.

  • Have trouble getting the listener to work

    At the end of configuring the nodes for the Listener I get this error message:
    Problem in configuration: oracle1: LISTENER_ORACLE1 Listener start failed. Listener may already be running. CRS-0215: Could not start resource 'ora.oracle1.LISTENER_ORACLE1.lsnr'
    if i try to manually start the listener with 'srvctl start nodeapps -n oracle1' i get the following errors;
    failed to get ip for locale host
    and then a whole bunch of errors of it trying to start the listener on every ip mentioned in the host file

    I'm not sure your problem.
    1. Please check listener, that is running or not
    $ ps -aef | grep LISTENER
    and try to kill it
    2. start by again by srvctl
    srvctl start listener -n ORACLE1
    ... Please post error again and tell information about ORACLE ENV

  • TS1741 Does anyone have trouble with the Remote app losing contact with the iTunes library after it has been connected and working fine for a while. If I go to the computer and turn off sharing, then turn it back on, it will relocate the library again.

    My iTunes remote app on my ipad mini will work fine for a while and then it will lose the library. I then have to turn off sharing on the computer and then turn it back on. This will work for a while and then I will have to repeat the process. Help!

    I have just found the problem to be windows firewall on my library PC
    I can only presume there has been an update to windows firewall or iTunes
    all the relevant programs were on the allowed list
    I'm now currently running with firewall turned off on my library PC.
    I'll update when i have found the rogue setting.

  • Does anyone have trouble with the space bar yielding either an M or N? I am pretty careful by very frequently get this error. Anybody seen similar?

    I am not the best typist but have tried going slowly. It seems the space bar is mis-aligned and when I try to add a space I get either and M or N. Very frustrating. Is there a way to recalibrate the screen to solve this problem?

    are you connected to a wall charger while you are trying that?
    sometimes when i connect to a wall charger, the callibration gets messed up, but when there is skin contact with the back, it goes away for some reason

  • Did anyone have trouble with iTunes after the recent update?

    My music and playlists were wiped out. THen I tried to sync my iPhone and it tried to wipe out everything on there with the new iPhone software update.

    Typically one buys an external hard drive and at regular intervals you copy the contents of your main hard drive to the external hard drive in case something happens to the contents on the internal drive.  That is a backup.  There is software to facilitate this, including Time Machine which is part of the system software OSX 10.5 on.  If you don't have this then it's like owning a house without insurance.
    An external drive costs around $100 so it is cheap given the high degree of inconvenience caused by losing the contents on your main drive.  Your main drive will fail at some stage and then you lose everything, 100%.
    If your library truly is gone then you will have to start over.  iTunes is not supposed to erase it when updating but it does happen occasionally which is why you always make sure your backup is up to date before updating software.  If your items are purchased from Apple you may be able to download them again.  If it came from another source then you will have to turn to that source.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this).  Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    (I'm not sure if the below is still the same with iTunes 11)
      Select the iTunes Store on the left side of iTunes( iTunes11: Button at top right).
      Click on Purchased on the right side under Quick Links.
      You can re-download your available previous purchases.

Maybe you are looking for