Did anyone set Zen Coding for Medit successfuly?

http://sites.google.com/site/tool4medit/home/zen-coding
There's a file which contains "tools" and "tools-module" directories. I unpacked them to ".local/share/medit-1/" (as the instructions say) and started Medit. Something appeared in "Tools" menu of Medit but no sign of Zen Coding. Did anyone install in successfuly there? What were your exact steps?

Hello Studygirl,
Welcome to Creative forums!
Zen V uses the Microsoft MTP driver, which is already in Vista. Therefore, it should work right out of the box, especially with Windows Media Player . Just plug your device and use WMP to transfer songs. You should be good to go.

Similar Messages

I received an Iphone 5 as a gift two days ago. The first thing I did was set up ICloud for photos. Itunes would not allow me to add songs to my new phone without restoring it, yet when I did this, it deleted all photos. And I cannot find them anywhere.

I received an Iphone 5 as a gift two days ago. The first thing I did was set up ICloud for photos. Itunes would not allow me to add songs to my new phone without restoring it, yet when I did this, it deleted all 129 photos of my graduation and friends from the past two days. And I cannot find them anywhere, photo stream, ICloud, nothing. Where can I get back my memories?

Were the photos taken by your new iPhone? If so, did you not import them off your phone to your computer (as you would any other digital camera) before the restore? If not, restoring wiped the data off the phone and your pictures are gone.
Sounds like a good time to (re)read the User Guide.

Zen-Coding for Dreamweaver CS5

Folks,
I have discovered a great tool to optimize our time when we are coding: Zen-Coding. You can discover more about it reading the dzone´s article and the Smashing Magazine´s article.
The problem is that It didn´t work in my Dreamweaver CS5. I could install but nothing works. I read that it is possible to access it through Commands>Expand Abbreviation but this doesn´t appear for me.
Could anyone help me, please?
All the best.

A friend also informed me about this issue and called me up to help view the problem. i understand that most applications that run on both mac system and Windows usually have a problem of 'ctrl' and 'cmd' respectively.
You will need to search for the configuration configuration folder of the version of your dreamweaver. For example: if you are using version CS6, "c:\users\[computer name]\appdata\roaming\adobe\dreamweaver cs6\en-us\configuration\menus\menus.xml".
These are few things to note:
you might need to enable 'show hidden folder' to see the 'appdata'
if you use the run button from start up windows, you will notice that the command will stop @ dreamweaver (bcos there might be a dreamweaver folder b4 dreamweaver CS6) and then you will need to go back to 'adobe' and then to dreamweaver CS6 and continue to the destination file.
Lastly, it will also depend on the language of the dreamweaver that was installed; for the example that is above it is clear that en-us was installed on the system.
You will now need to open the menu.xml file using either notepad or wordpad or any text editor then search for zencoding
change
<menuitem id="DWMenu_Commands_ZenCoding_expandAbbreviation" name="_Expand Abbreviation" key="Cmd+," file="Commands/ZenCoding.html" arguments="'expand_abbreviation'" />
to
<menuitem id="DWMenu_Commands_ZenCoding_expandAbbreviation" name="_Expand Abbreviation" key="Choose your key (e.g. Tab or tab)" file="Commands/ZenCoding.html" arguments="'expand_abbreviation'" />
Save the file and restart your dreamweaver.
try div#name and it should give you <div id ="name"><div>
I hope this works for you.

Activity log for bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found) did anyone find a fix for this? Thanks, Edie

bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found)
Apparently the profile .default is missing. Therefore the bug 278860 is activated and I can't start Firefox. Is there a solution?

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

Did anyone find solution to Video playlist on iPad 2?

DId anyone find a solution for video playlist on iPad 2 continuously ?

I very much doubt if there is such a list. A number of sites, especially news sites, have their own apps in the App Store - have you looked to see if any of your favourites have apps ?

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

Did Cisco ISE have limitation for policy setting?

Deat All,
Did anyone know about Cisco ISE limitation about policy setting?
Right now my setting for windows posture policy around 200 windows patch checking, did ISE have limitation such as maximum windows patching policy line?
Thanks you
Best Regards

Here is the nswer for your first question.
Cisco ISE profiler collects a significant amount of endpoint data from the network in a short period of time. It causes Java Virtual Machine (JVM) memory utilization to go up due to accumulated backlog when some of the slower Cisco ISE components process the data generated by the profiler, which results in performance degradation and stability issues.
To ensure that the profiler does not increase the JVM memory utilization and prevent JVM to go out of memory and restart, limits are applied to the following internal components of the profiler:
Endpoint Cache—Internal cache is limited in size that has to be purged periodically (based on least recently used strategy) when the size exceeds the limit.
Forwarder—The main ingress queue of endpoint information collected by the profiler.
Event Handler—An internal queue that disconnects a fast component, which feeds data to a slower processing component (typically related to a database query).
For more information go through :
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html#12624

HT5887 Did iOS 8 break AirDrop for anyone else?

AirDrop worked just fine for me in iOS 7 -- my iPhone and iPad were both set to "Contacts Only" and I could easily share content between them. Since upgrading to iOS 8 they only see each other when AirDrop is set to "Everyone," but I can still see friends' phones when on "Contacts Only." The same thing is happening now in Yosemite, where I can only share things with myself if AirDrop is set to "Everyone." All three devices are signed into iCloud.
Does anyone know how to get AirDrop working again like it did in iOS 7? Today's 8.1 update did not resolve the issue for me.

Other people have reported issues with the keyboard in iOS 8. I had some problems and I reset all settings and that fixed most of the issues - everywhere but in this forum. But the keyboard problems in this forum are a as a result of the crappy software that this forum runs on.
First reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. See if that does any good.
If that made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Has anyone encounter this "unable to set node credentials for /LDAPv3"?

Install and updated the Macmini server to 10.6.5. It working fine until try to access the Server Preferences and error message "unable to set node credentials for /LDAPv3/127.0.0.1 with the record name **." Looking at the logs and has servermgr_accounts got error 5203 trying to auth to local LDAP node. Has anyone found solution for this problem?
Thanks
Luis

Thank you for responding. This is what we are using in a small company a Cisco Switcher, and don't have a router.
If you're getting connections off of the network out to the Internet, then yes, there is a router involved. Somewhere.
MacMini server I have an IP address of 169.254.xxx.xx, before IP address was 192.254.xxx.xx.
That IP address implies that the box isn't getting an IP address from a DHCP server; that's the self-assigned block. (Officially, these addresses are in the Automatic Private Address Configuration Automatic Private IP Addressing (APIPA) IANA reserved range.)
Which implies that at least two problems lurk.
Mac OS X Server must have a static IP address. Not DHCP-assigned dynamic addresses.
And a DHCP server isn't answering the IP address requests. (Well, not unless the DHCP server is passing out addresses in the self-assigned block, and that wouldn't likely be considered best-practice. More likely an IP address from a DHCP address pool allocated within a subnet somewhere in the 10.0.0.0/8 or 172.16.0.0/12 or (less desirably) 192.168.0.0/16 private blocks.
The Firewall is not turned on. Its purpose is for guest to access files, without deleting or modifying it.
When you're debugging problems, simplify. Divide the problem. With network services, test the lowest levels of the stack. Then work your way up the stack; toward higher-level services and mechanisms. Then add more parts and pieces, and DHCP and related.
IP hosts operating at 169.254.0.0/16 addresses (for longer than it takes to get an IP address from DHCP) usually implies that the network configuration is invalid or the DHCP server is not working.
I did not expect that Open Directory would be a big problem.
If DNS services or IP routing is misconfigured, then the whole rest of the stack will be unstable at best. The configuration order (and debugging order) involves functional IP networking and hardware, first and foremost. Then having functional DNS. Then Open Directory and then Kerberos. Then the rest of the stack.

HT1386 I have a new iPhone and want to purchase a ringtone on iTunes. It keeps asking for answers to a question that I did not set up and don't have the answer for. How do I get pass this dilemma?

I have a new iphone and want to purchase ringtones from itunes. Itunes is asking answers for security questions I did not set up and I can't answer them. How do I get past this to be able to purchase. I can purchase songs on my MAC and sync but itunes doesn't give the option to purchase ringtones on the MAC, just the iphone.

If the email hasn't arrived after a few hours and isn't in a spam filter, you need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106007)

How to set/get the values thru Wedbynpro coding for User mapping fields

Hi All
In system object we have the user mapping fields like District,city,plant,Salesmanager.
now we want to set/get the values of these usermapping fields of system object thru webdynpro coding...
if anybody have sample codes of the same then it would be great help to me
Thanks in advance
Thanks
Trisha Rani

Hi Kavitha
Thanks for your reply
My requirement is exactly as follows.
1) i have created one portal system object in system administration and also i created usermapping fields in the system object from the usermanagement in system object.
i created the user mapping fields like Plant,SalesManager,District etc.
i also created the system alias name for the same system object
2) Now i came to persoanlize link and mapped the system object to the portal user.
while mapping to the system object we need to enter Mapping userId, Password , once we enter these values and we can also enter the values of usermapping fields which we defined while creating the system object ( for example District,Salesmanager,Plant etc)
once we enter all the values and click on save then these usermapping values to be mapped to the portal user.
3) Now my requirement is , i want to control the usermapping field values thru webdynpro coding for setting/getting the values.
I need sample code of the same.
Please let me know if u need more details on the same.
Thanks
Trisha Rani

HT4061 I cannot access my I Pad it is asking for a passcode, I did not set one, so a code has been created and i need to have it reset

I cannot access my Ipad. It is asking for a passcode, I did not set one. How do I reset this so that I can log onto my Ipad?

Hey dmplinton518,
You'll want to follow the directions in here:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Sincerely,
Delgadoh

I did the ios 5 update for iphone 4 and can no longer see the pics i take in the camera app or camera roll. nothing will let me see them the page just goes to no photos or videos. if anyone knows a solution or a fix it would be greatly appreciated. thanks

i did the ios 5 upgate for my iphone 4 and can no longer view the pics i take in the camera app or camera roll in photos. nothing lets me see them the page just goes to no photos or video but i can see the last pic i took in the little box in the corner in the camera. does anyone know how to fix this problem and make it work normal again. thanks

Try a reset of the device by pressing and holding the home and power button for 15-20 seconds until the white Apple logo appears.

I just got a new mac pro and did not set up a password and now it is asking me for one? what can I do now?

Hi...please help me. I just got a Mac Pro yesterday and did not set up a password at apple now it is asking me for one to download flash player plug in. what can i do?

Shootist007 wrote:
You must of set a password on the computer when you kfirst turned it on. Otherwise you wouldn't be using it.
What I think you are talking about is a user name and password for an Apple ID.
Apple IDs use a email address and a password you create for that email address on Apples website.
There should be a link on whatever page you are on to Create an Apple ID. Click that link.
Or just open App Store from the link on you Dock then Find the link to create an Apple ID.
Absolutely not. You can create a blank password. Yes it's stupid. Yes it's unsafe. But from helping people with their Macs, I find most do not set up a password. <facepalm>

Did anyone set Zen Coding for Medit successfuly?

Similar Messages

Maybe you are looking for