Did anyone try to cluster BEA Portal 7.0 sp1

Hi,
Am trying to cluster BEA Portal sp1 ,everything goes fine but when i try to
access the portal on both the servers on the second server i get a Portal Null
State Exception .The App works fine on the Primary Server ,but shows bizarre behaviour
on the secondary.Have configured session replicaton,replication groups etc
Would appreciate any help.
Regards
Parikshit

Hi Parikshit,
First of all make sure to deploy the PortalApp to the cluster. The best way to
make sure is to open config.xml file and see the entry for PortalApp. Also make
you the PortalApp is sync to both the server. Follow the datasync-cluster setup
guideline which is in dev2dev.
Regards
Syed
"Parikshit" <[email protected]> wrote:
>
Hi,
Am trying to cluster BEA Portal sp1 ,everything goes fine but when
i try to
access the portal on both the servers on the second server i get a Portal
Null
State Exception .The App works fine on the Primary Server ,but shows
bizarre behaviour
on the secondary.Have configured session replicaton,replication groups
etc
Would appreciate any help.
Regards
Parikshit

Similar Messages

Did anyone try Ipad2 with another SIM ?

hi,
did anyone try Ipad 2 With another Carrier ? Anyone bought 3G ipad with at&t plan and use it with another carrier ?
i need to make sure before i buy it.

05-May-2007 07:32 PM
nboy wrote:
I try to installed Text-To-Speech program into my N70 but it show "File Corrupted" what wrong with it? I wanted to know it's because the program or my phone.
not all phones support Text to Speech...
1st, you can not install "Text to Speech", this is built-in to the system the only thing you can add are the the different "voices", hence if your phone does not originally support Nokia's Text to Speech, you will not be able to install it, however if i am not mistaken there are 3rd party software that does "text to speech"... goggle nokia mobility for more info...

Did anyone try to upgrade the java compiler to jdk1.4?

Hi All,
Maybe I'm just too hurry to try new things off. With only changing the compiler
to version 1.4.0 I got the attached error message. It would very kind of you to
give me advices.
Thanks,
YH

JDK 1.4 is not yet supported with WLS 6.1.
YH Cheng wrote:
The error message returned from startWebLogic.sh
LD_LIBRARY_PATH=/local/ldap/bea/wlserver6.1/lib/solaris:/local/ldap/bea/wlserver6.1/lib/solaris/oci816_8
java.lang.SecurityException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:97)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at javax.security.auth.login.Configuration$3.run(Configuration.java:221)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.Configuration.getConfiguration(Configuration.java:215)
at javax.security.auth.login.LoginContext$1.run(LoginContext.java:170)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.init(LoginContext.java:167)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:393)
at weblogic.security.internal.ServerAuthenticate.main(ServerAuthenticate.java:81)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:200)
at weblogic.Server.main(Server.java:35)
Caused by: java.io.IOException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.init(ConfigFile.java:206)
at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:95)--
Rajesh Mirchandani
Developer Relations Engineer
BEA Support

Did anyone try to restore after the ios4 update?

on 2gt or 3gt restore then add all your stuff back in? did it fix the ios4 problems?? the guy at apple told me to do so but i dont want to lose all my game progress.

When you choose to restore it will go ahead and reset your iPod and then it will ask you if you want to set it up as new or restore your settings from your backup. If you do this, and there are no errors, you won't lose your data. I've done it a dozen times since iOS 4 and it has not resolved any of the issues at all.

So did anyone hack the iPad and made it work with Flash?

Hello Dudes & Dudettes,
I basically need to write a Flash game that would work through the Safari browser on the iPad.
Did anyone try to re-write the Adobe iPhone packager and make it work for the iPad? I am curious... ?
Also anyone knows if it is possible to hack the browser in order to use the standard embedded flash code?
I hate using the Xcode SDK, mainly because I am not that good at C++, and basically AS 3.0 would be ideal for me to develop for the iPad.
Help is much appreciated!
thanks,
Dave

comex has a new project you may want to follow http://www.youtube.com/user/Xuzz149#p/u/0/adouTnXgelE

My iPhone randomly turns off by itself with battery remaining. I can turn on the iPhone by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!

Deploying BEA Portal App in Managed Server problems....

Hello,
I have a BEA portal application (exploded EAR) that I want to deploy in a managed server. I first created a regular portal domain (8.1 SP4). I then created a managed server via the console. When I went to deploy my portal application (in the console), I received an error indicating that the application was a Split Development Directory and that I would have to run the wlpackage Ant task against the application first. I ran the wlpackage ant task and it seemingly worked.
I then used the wldeploy Ant task to deploy it in the managed server but got an error indicating that it could not find a JNDI name from one of the data sources. I went back to the console and targeted/deployed all of the default Connection Pools & Data Sources to the managed server thinking that was the reason the deploy failed.
When I ran the wldeploy again I got the following error:
Module: content.jar Error: Exception activating module: EJBModule(content.jar, status=PREPARED)
Unable to deploy EJB: ValueBean from content.jar
java.sql.SQLException: javax.naming.NameNotFoundException: While trying to lookup 'portalFrameworkPool; contentDataSource;weblogic.jdbc.jts.commercialPool' didn't find subcontext 'portalFrameworkPool;contentDataSource;weblogic' Resolved ; remaining name 'portalFrameworkPool;contentDataSource;weblogic/jdbc/jts/commercialPool'
Has anyone run into this? Am I not suppose to deploy a portal application in a managed server?
Any help would be greatly appreciated.
Thanks - Peter Len

Problem solved.......
After targeting all the data sources and poolers to the managed server, I restarted the main domain but did not restart the managed server. After restarting the managed server all was well.
Thanks - Peter

Out of the box porlets for Content Management with BEA Portal

I am looking at BEA Portal for a simple Intranet site with some basic content management system capabilities. I would like to implement this without the use of a third party tool and wanted to know if there are any open source or out of the box BEA portlets/web-apps with basic CMS capabilities beyond what has been shown in the Portal tutorials around CMS. From doing the tutorials, I have learned how to manage content, and how to build a site from scratch to access the content using the <cm:> tags. However, without additional third party products such as Documentum or Interwoven, is there any free BEA/open source portlets to:
- Configure exposure of this content in a runtime framework? (ie content manager can expose new content from the repository by a configurable admin GUI, place where this content is on the page)
- Allow for a simple approval workflow where content that gets added to the repository by user A has to be approved by user B before automatically exposing?
Interested to know if custom portal type development is the only way to do these kind of simple functions, or third party product.

Hi,
Did you have a chance to look into WebLogic Portal 8.1 SP3? Check out the new Library Services features, which includes versioning and simple approval:
http://e-docs.bea.com/wlp/docs81/adminportal/help/CM_MAN_LifecycleOV.html
We also provide a few ootb portlets that allow users to interact with the CM system. Let us know if you have additional questions.
Best Regards,
--alex

8.1 equivalent of portlet:form event=bea.portal.framework.internal.refresh

I've got a portlet with an edit JSP that allows the user to set some portlet settings. The edit JSP uses a form defined with the tag <portlet:form event="bea.portal.framework.internal.refresh" >. This in essence allowed the edit JSP to submit the form to itself, so it could then process (store) the settings.
This tag is no longer supported in 8.1. I haven't been able to find what the equivalent is. Am I going to be able to do the same thing, or am I going to have to rewrite the Edit piece as a page flow?

I've already tried that and it's not working in my current portal.
The other things I've tried are <render:postBackUrl/> and <render:windowUrl> for the form action, and they weren't working, either. But since then I've discovered that in a new vanilla portal installation, the <render:postBackUrl/> action works fine (I assume the controller would, too, but I didn't try it).
It seems I now have a different problem to work through to figure out why <render:postBackUrl/> works in a new installation, but not in my current one. The same goes for the controller.

Did anyone else's ipad2 crash with the latest update of 7.1.1?

Did anyone else's ipad2 crash after the latest update of 7.1.1?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Did anyone here had a problem with screen resolution or brightness when upgraded their ipad to ios7?

I had a mini ipad and upgraded it to ios7 last night. And when I woke up this morning the screen of my ipad had those lines like in an old black and white movies and I can't almost see the apps icons. It is almost a white screen. And after 5-10 minutes it statrted to be clear again. Did anyone had the same problem?

EilaJA wrote:
I then followed instructions for restore with my macbook air, but each time i tried, itunes told me either the ipad needed the passcode entered
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
EilaJA wrote:
...or it encountered and unknown error (9).
See Error 9 here > http://support.apple.com/kb/TS3694

Did anyone tried Rejection Message Handler via Queue based method?

Dear All,
I am presently doing a Rejected Message Handler process and successfully implemented with File based and Web Service based. But I am not getting the clue for Queue based. We can enqueue the rejected message into queue as a JMS message via this method. But the URI format they have given is *"jdbc:oracle:thin:@<host>:<port>:<sid>#<un>/<pw>#queue"*. Format includes jdbc connection string along with queue name. For this I have created JMS module with JDBC Persistent store and created queue in it. But still I am not able to enqueue the message inside the queue. Also, is there anyway to see the queue names inside the DB. Did anyone tried this method? Could you please share the info??

WL JMS Queue consume>BPEL1 (One way) invoke>Mediator service (one way) route> BPLE2 (one way). Also I have added transaction properties in BPEL1 and 2 + References + Services.
Now, if there is a fault in BPEL2 the transaction should be rolled back in BPEL1 and the message should be seen in the WL queue itself. But that is not happening in my case. Everything is getting rolled back upto a point just after the >recieve activity in BPEL1 except the message is not getting rolled back to queue.There will be 2 transactions in this scenario : 1) jms queue to soa hydration store 2) soa-hydration to bpel execution.
This is the behaviour for 1 way or async interfaces , jms adapter thread completes its transaction work after persisitng to dehydration store and another bpel system thread starts work executing the bpel code after retrieving the message off the db in a separate transaction. So the rollback you are seeing is only applicable for 2nd transaction which roll backs to the dehydration store instead of the queue.
For synchronous interfaces, the same adapter thread will be involved for complete message processing including bpel code execution. So I think if you want to get the jms queue within the same transaction you can try set up the interfaces to be sync, even with dummy responses. This might make jms adapter thread to start a transaction --> read message off queue within the same transaction --> execute bpel code within same transaction --> complete/rollback transaction based on bpel code execution.

Did anyone lose music when updating to ios 5?

what the title says. Did anyone lose music when updating to ios 5?

Yes... It shows up as being on my iphone when I have it connected to iTunes, but if I try to call it up on the Music folder of my iphone, there's nothing there. Very frustrating... I don't know what to do. I would hate to have to re-format my iphone, but it's looking like that might be the only answer at this point.

Did anyone catch the 11/19/08 ALUI roadmap call?

I was just browsing the Oracle site trying to find release notes for 10g R3 (which don't seem to exist) when I noticed a banner advertising an ALUI roadmap call that took place yesterday
(http://www.oracle.com/webapps/dialogue/dlgpage.jsp?p_ext=Y&p_dlg_id=7078534&src=6642147&Act=29)
Is it archived by any chance?
Did anyone catch it? If so, anything newsworthy to report?

Geoff,
Release notes and documentation for all Webcenter Interaction 10gR3 products (formely Aqualogic User Interaction) are located here:
http://www.oracle.com/technology/documentation/bea.html

The popup LOV is very slow in APEX 4.0, did anyone can help on this?

The popup LOV is very slow in APEX 4.0, did anyone can help on this?
Wherever I try to open a popup LOV windows , I am always be very patient to wait the window show . Even if only a very few record to show.
Edited by: daniel.luo on 2010/7/28 上午 7:52

Hi Daniel,
it probably doesn't matter how many records you show if you have an ORDER BY clause in your SQL statement. Because the database still has to do all the work to return you the first result set.
Is the query itself fast if you execute it in "SQL Workshop"?
Have you already tried the setting "Fetch" = "No Fetch"? Is the window now opening faster? I just want to rule out that it's a generic problem, but I think it has to do with your SQL statement.
Was the popup LOV for this SQL statement faster in 3.2?
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

Did anyone try to cluster BEA Portal 7.0 sp1

Similar Messages

Maybe you are looking for