Did bill gates sneak in when they programmed leopard.

I installed Leopard last week and i have to say that I'm not very impressed with it.
First off my itunes stopped working, so i have got that going again now, but my computer seems to be running a lot slower than it was. I know that this has been out for quite some time now so i thought they would have got rid of these bugs by now. Should i go back to 10.4? seems like they spent so much time adding pointless extra features and forgot what it was that apple users really enjoy. RELIABILITY! It seems to have left apple for now. For example featured download last week was a programme called internet clean up. i thought i'd try it as I have never had security on my mac before, anyway it wouldn't install and now brings up some warning message every time i turn on my computer. <Edited by Moderator>

not happy anymore wrote:
I installed Leopard last week and i have to say that I'm not very impressed with it.
First off my itunes stopped working, so i have got that going again now, but my computer seems to be running a lot slower than it was. I know that this has been out for quite some time now so i thought they would have got rid of these bugs by now. Should i go back to 10.4? seems like they spent so much time adding pointless extra features and forgot what it was that apple users really enjoy. RELIABILITY! It seems to have left apple for now. For example featured download last week was a programme called internet clean up. i thought i'd try it as I have never had security on my mac before, anyway it wouldn't install and now brings up some warning message every time i turn on my computer. This sort of stuff is why i hate PCs. Sort it out
Welcome to the Apple forums:
From your experience I would say that your Tiger system was not prepared for Leopard, and you may have some 3rd party apps or other drivers and software that are not fully Leopard compatible.
It also seems as if you may not have done a disk check and permissions repair before updating to Leopard.
You are not being specific, so it is not possible to address any of your issues such as what the warning is and/or is it important, etc.
This board deals with specifics. Users present a problem or issue and others attempt to solve it. General statements about things are not helpful.
I have installed Leopard on 3 of my machines and several others with zero problems, zero issues and they are all running perfectly this day.
Any initial slowness is most likely because Spotlight is doing its initial indexing.
It's good to read these boards before posting, and even before installing Leopard so you know what to expect and how to prepare for it.

Similar Messages

How can you screen your iPad on a keynote presentation? Just like Apple did in last years WWDC when they demo iOS 5 how do they do that

How can you screen your iPad on a Keynote presentation just like Apple?
Like when they had last years WWDC when they demoed iOS 5 on the iPod Touch 4G
Can you do that with an iPad 2?

AL113-
Mirroring refers to normal operation of the iPad, where you can see the Home screen on your external display, as well as when setting up a slide show, et cetera. You may not need to mirror the iPad's display for presentations (but the iPad 2 does mirror). At least for slide shows and videos, the iPad 2's screen does not show the presentation when an AV cable is connected, it only appears on the external screen.
The alternative I mentioned about using the Apple TV box with AirPlay is probably easier to do, except you need the Apple TV box to interface to your external display. One problem with an AV adapter, is that the weight of its cable tends to pull the connector out of the iPad as you are holding it.
Fred

Showing my contacts as online when they're NOT

It's really getting into my nerves. My contact has his skype automatically answering calls from me so I can can call him even when he's sleeping without disturbing him because our skype calls always get cut after a few minutes. This has happened all the time before, it always shows that he's online even when he's not! When I call, the voice message shows up and it's getting pretty annoying. I found a solution before, I quit skype and open it again. or I look at my iPhone's skype because it USED to show if someone really is online or offline, or I sign out on skype and sign in again, or I even turn off my wifi and turn it on again. I even changed my laptop from the Microsoft Surface 2 to an Apple Macbook Air because I thought the Surface 2 was the problem. BUT NO. SKYPE WAS THE PROBLEM. I did all 4 methods even when they're really annoying to do, and they worked fine for a few days, BUT NOW THEY DON'T DO SH**. I looked at my phone's skype, logged out my phone's skype and logged in again, logged out my laptop's skype and logged in again, turned off my wifi and turned it on again, quit my laptop's skype and open it again, and again and again and again! Note that everytime I do each method, I try to call him incase he's online, but that FFFFFing video message thing shows up EACH TIME.
I'm seriously pissed off. Skype was the only thing connecting us because we're in a long distance relationship. Skype isn't helping at all. I am on the verge of switching from this crap to Viber because I heard viber was WAY BETTER. Fix this man. Uggghhhh!!

Hi Daniel:
Try this:
Complete the following steps to enable presence in Microsoft Outlook for individual users with the Active Directory User and Computers administrative tool:
Step 1       Start the Active Directory User and Computers administrative tool. You must have administrator permissions to run the Active Directory User and Computers administrative tool.
Step 2       Select View in the menu bar and then select the Advanced Features option from the drop-down list.
Step 3       Navigate to the appropriate user in the Active Directory User and Computers administrative tool.
Step 4       Double click the user to open the Properties dialog box.
Step 5       Select the Attribute Editor tab.
Step 6       Locate and select the proxyAddresses attribute in the Attributes list box.
Step 7       Select Edit to open the Multi-valued String Editor dialog box.
Step 8       In the Value to add text box, specify the following value: SIP:user@cupdomain.
For example, SIP:[email protected]
Where the user@cupdomain value is the user's instant messaging address. cupdomain corresponds to the domain for Cisco Unified Presence or Cisco Unified Communications IM and Presence.

I allowed PC Update Support to take over my computer. When they were off I checked them out and discovered they were most likely scammers. I ran my antivirus program and changed password but should I be concerned about installed malware?

I allowed PC Update Support to take over my computer (long story) When they were done I checked them out and discovered they were most likely scammers. I ran my antivirus program and changed passwords. Should I be concerned that they may have installed malware?

If you are sure they were scammers the only way to be 100% sure they left nothing behind is to wipe your system disk, do a clean install and restore from a backup you are sure was made before the scammers got onto you system.
There is no other way to be sure that thye did not leave somehting behind. In addition if you have used any credit card numbers while on the system, back account (or any other) passwords, tax returns, etc. You need to be alert fo IIdentity Theft | Consumer Information. It may be a good idea to place a fraud alert with one of the credit reporting agencies (the link above will detail what to do)
And of course change the passwords right away.
good luck
Message was edited by: Frank Caggiano - This assumes you are in the States. Different procedures may apply in other countries.

Photoshop Elements 12 has been wiped of my laptop when they removed some viruses. How do I get it back because I bought it online and downloaded it instead of having the program disc?

How do I recover the program for Photoshop Elements 12 that was wiped off my computer when they removed some viruses? I no longer have the program because I bought it on-line and downloaded it instead of having the program disc. I bought it last year and can't seem to contact anyone at Adobe or find out who to call.

You can download it here:
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Follow the Very Important Instructions exactly, even when they don't seem to make much sense. Of course you will need your serial number.

My computer had to be restored at the apple store. When they did it my Microsoft word, powerpoint, and excel were all deleted! How can I get them back? Who do I talk to, Apple or Microsoft?

My computer had to be restored at the apple store. When they did it my Microsoft word, powerpoint, and excel were all deleted! How can I get them back? Who do I talk to, Apple or Microsoft?

you are responsible for reinstalling any apps. It is not Apples responsibility as outline the the service agreement. Do you have the product key?

Recently my movies and videos take forever to load and when they start playing it's for a second or two at a time. Have to hit the play icon over and over, did not use to be this way they work great on my desktop and iPod

Recently I have been experiencing my downloaded videos and online vids taking a long time to load and when they do, they will only play for a few seconds at best and you have to hit the play icon over and over. Never had this problem before with the 20 plus vids I have any suggestions would be appreciated

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Why did Apple omit the Panorama feature in Camera on the Ipad, when they did the IOS6 update?

Why did Apple omit the Panorama feature in Camera on the Ipad, when they did the IOS 6 Update? They included this feature on the iPod touch (5th gen) so why not on the iPad?

I was on vacation in a national park and saw people using their iPads as a video camera...one of them standing in the middle of a 'river' (read really large stream) at the time.
I'm going to also go with the supposition of it being a different camera and probably different video handling processor. The iPhone is quite far ahead of the iPad camera wise, so probably has better protocols in place to handle images, especially something as complex as the 'live photo stitch' of the panorama.
many existing cameras take what the panorama was, a 'photo stitch' where mulitple side by side photos are stitched together into one large panorama. This just appears to do it 'live' instead of individual shots that need to be processed on a comptuer to make the panorama.

I just added two external firewire drives and they keep going to sleep. I did not have this problem when USB. I have turned off "put disks to sleep" in power preference.

I just added two external firewire drives and they keep going to sleep. I did not have this problem when using USB external drives. I have turned off "put disks to sleep" in power preference.

It is not clear if these are the same drives, just connected
differently, or different drives?
One thing that may be happening is that the drives firmware
itself is putting it to sleep when inactive. Many drives on
the market have ths feature and it is turned on by default
and require a drive utility from the manufacturer to disable it.

Did anyone else lose APPS that they paid for when upgrading to iOS5?

Did anyone else lose APPS that they had paid for when upgrading to iOS5 on their iPhone 3G?

I heard that the ipad2 hd apps will not move over to the iphone 4 or 4s...they are different builds that will only work for ipad...that really *****...
you would need to buy and pay for the apps again if you want them on the iphone...
can someone verify this for sure?
from now on i will only buy apps that have the + on it meaning they can be used on ipad and iphone...

When I go to buy my Mac at the Apple Store, can they program Adobe Photoshop CS6 on it while I am there?

When I go to buy my Mac at the Apple Store, can they program Adobe Photoshop CS6 on it while I am there?

The online Apple store may offer to pre-load a version of CS6 for you, for the cost of the software package plus a few days set-up delay in shipping your Mac to you.
The bricks and mortar stores do not sell software. It gets stale too fast.

Trying to combine folders within LR4 from two separate drives without creating duplicates--sometimes it won't let me transfer to destination folder because it says files are there when they are not; other times, allows duplicates to transfer

Trying to consolidate 261K+ of images within LR4 between two drives. Someone who was "helping" me with my Library in LR4 for some reason took some but not all of the file folders from my main backup drive (M) and duplicated them onto a partitioned hard drive (E) directly on the computer. The duplication is huge, so I am trying to condense them all back onto the original backup drive M, particularly since I believe there are also folders on the partitioned backup drive E that do not appear on the main one M, and there are many more file folders on M that are not on E, so that is the destination drive.
CONSOLIDATION: When I try to drag either the file folders or the individual files from the duplicate drive E to the original drive M to combine the two drives since the folders in many cases for some reason are not identical, sometimes LR4 says the files already exist when they clearly don't. Other times it allows me to drag and drop all files, even if the exact duplicates are already on the destination drive, thereby doubling the number of files per image and creating more duplicates. Right now I am opening each file folder on the duplicate drive E, looking at what extensions and file names are there, scrolling to the original drive, making sure they appear to be identical, then going back to the duplicate drive E, deleting the images in the folder, removing the folder, and moving to the next folder on the duplicate drive E. *There has got to be a simpler way.*
CONSOLIDATION APPROACH: I did start to create file folders names A, B, C and group file folders under them to reduce clutter, since those header folders can be closed down when not in use, but now I am wondering if I should have done that alphabetization to the main backup drive rather than to the partitioned backup drive.
My goal is to consolidate the two drives down to one, delete as many images along the way that I know I will never miss, then backup the catalog and export it to an external drive and then copy that to yet another drive for offside storage. Does this sound like the proper plan? Last time it took almost 24 hours and over a terabyte to export the catalog.
DUPLICATION: I also have many file folders that have the exact same image in them. One portfolio image may actually be in eight different folders, with the exact file, file name, file size, and date, even though I always have checked "no duplicates on import," How can this be? What is the best way to sort through duplicates? Why are the files in some of the duplicate folders not in numerical order? If I do a search and call up a file # and find 15 duplicates, the only way I can find where those duplicates reside is to take each duplicate, right click to Locate Folder in Library, then once I find it, I have to go back to All Photographs>Text.search for file #, go to the second duplicate, right click to Locate Folder in Library, then once I find it, I have to do it all again. Is there a simpler way to see all the occurrences in their respective folder locations at once?
SEARCH BY FILE FOLDER NAME ONLY: I also find I can't search for a file using a folder name (for example, "John_Doe"). I can only search by file #, keywords, or camera/lens/date, etc. Why will it not work to use All Photographs>Text>search for Doe? In other words, if I didn't keyword the individual files as John Doe, I can't search for them by that moniker.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
FOLDER LIST PRINTOUT: Is there a way to print out the Folder list (other than a screen shot)? I have so many file folders on each drive since I sort not by Year/Month/Date but by subject. It makes trying to compare duplicate folders quite unwieldy.
SLOW RESPONSE: And finally, as though that weren't enough, why does LR4 continually blink to a white screen after each keystroke? Takes forever just to be able to click through images, view info after hovering, etc. All other programs are closed down and the operating system shows very little memory being used.

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Chat App: how to store the user IP in database when they login.

hello,
i am working on chat application. first i made a login GUI form. after login when we run the Chat program, it ask the ip address of the server to whom it want to connect. and if u enter the ip address, it will connect to the server and chat will begin, thats working perfect.
but i want to show the list of users who r logged on and when i simply click on the user name, chat should begin.
i have the logic that when any user log in, then its IP address will be stored in the database. this ip address will shown to the online users.
but i dont know how to store the user information in database when they log in. can any body suggest me wht lines of code i should use.
thanks.

palakk wrote:
i have the logic that when any user log in, then its IP address will be stored in the database. Bad approach. That will only work if this chat is only intended for use on a LAN. If it's used on the internet, then your users' IP addresses will almost always be either a) those of their routers, or b) private IP addresses, and in both cases, multiple users can have the same IP address.
this ip address will shown to the online users. Why would you want to do that? I want to chat with "Bill", not with "1.2.3.4".
but i dont know how to store the user information in database when they log in.Do the same thing that you're currently doing to store the IP address, but with the other information you want to store.
can any body suggest me wht lines of code i should use. This is not a code writing service.

Error when generating program /SAPAPO/TSM141 and Errors in source system

Hello APO Experts!
I had to include a new key figure in the cube and the planning area with configuration semantic = 000.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" and u201CErrors in source systemu201D when trying to load data in the Infopackage.
Do you have any idea of what this could be?
Best Regards
Nik

Hello,
The problem may come from the inconsistency between the datasource settings and the content in table /SAPAPO/TSAREATE.
- SE16, go to table /SAPAPO/TSAREATE, input the planning area name, check the extraction structure, which is started from '/1APO/EXT_STRU'.
- SE16, go to table /SAPAPO/TSAREAEX, input the datasource name, and check the extraction structure.
Are the two extraction structures the same or different ?
If they're different, please read the below solutions, otherwise, you can ignore the following.
In general and most customer cases this inconsistency happens during transporting of datasource alone. In many cases the planning area is directly created at target system and datasoucre transported from a a different system which causes incorrect export structure entry in planning area table.
Please refer to following content from note 549184:
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the structure of the planning areas. That's why the planning area MUST ALWAYS be transported with or before the DataSource.
The simple solution will be to create a dummy data source for this planning area. This will regenerate the extract structure for all other data sources as well and update the corresponding tables. After that you can delete the dummy datasource.
After delete the dummy datasource, in case of inconsistency, please also run the report /SAPAPO/TS_PSTRU_GEN report for
- Basis - form routines
- Create planning objects
- Planning area extractor
with the flags "Reset generation time stamp" and "Generate" set.
And in order to transfer datasource correctly, please also refer to the consulting note 514524.
Best Regards,
Ada

How do help my students log into their persona accounts when they receive the error message "Internal Server Error?"

2 students received this error message when they are trying to connect their forallbadges.com accounts to their openbadges accounts. After receiving this error message during our class time, I wasn't even able to log in to their persona accounts. When I enter their email and password info, I then click Sign In but nothing happens. I'm kept on the same page.
We are using MacBooks running Lion. This is the case in Chrome, Firefox, and Safari. Thanks for any help you can provide. Debbie Blair

Hi there. I just tried connecting to open badges backpack through forallbadges using a student account that was receiving an internal error message. There was no change. The student account is still receiving the same error message. I've attached a screen shot of the error message.
There were also a few students that never received a verification email from persona after they created an account through forallbadges. It looks like the accounts are receiving an email that weren't receiving them before. I tried to create a persona account with a student that hadn't received a verification email and now she did! Everything then worked perfectly! I guess the programming update fixed that problem.

Did bill gates sneak in when they programmed leopard.

Similar Messages

Maybe you are looking for