Did Gingerbread change something in the corp sync email

Corp sync now downloads the calendar events only, no email, says certificate error

Droid X - Corp Sync provisioning errors
Problem:
Software Release 4.5.596 enhances the response for several policies providing greater customization of the Exchange environment. These enhancements improve Enterprise capabilities and the level of encryption and Exchange Active Sync support is now more robust. Please use this FAQ for a best case practice for configuration.
Scope:
This solution applies to Exchange 2007 and 2010 environments.
This document is directed to an IT Exchange Admin familiar with modifying the Exchange ActiveSync policy(s) that apply to customer mailbox(s).
When  the phone is updated to the 4.5.596, the phone may experience a Provisioning Error with the Orange triangle on the status bar (Account Name provisioning error, Please contact server admin) and the Corp sync accounts are no longer communicating with the Exchange Server.
When setting up a new account on a Droid X with software update 4.5.596, the phone displays an error message:  Error, The device cannot be provisioned on this server.  Please contact the server's admin and the account never completes the set up.
Resolution:
When the Exchange Activesync policy setting is configured with "Allow non-provisional be devices" unchecked, make sure the Exchange Active Sync settings below are selected.
Password Tab:   
Allow Simple Password (see note below on securing device)
Device Tab:     
Allow Removable Storage
Allow camera
Allow Wifi
Allow Internet sharing from device
Allow remote desktop from device
Allow Bluetooth Handsfree Only
Advanced Tab in Exchange 2007:
Allow Browser
Allow consumer mail
Device Application Tab in Exchange 2010:
Allow Browser
Allow consumer mail
Those policies are not supported at this time and causing the provisioning problem.
Additional information:
Definitions of Allow Simple Password and Minimum Password Complex Characters:
Allow Simple Password Exchange ActiveSync policy - this policy allows IT administrators to prevent user from creating passwords containing only repeating or sequential characters (like "abcd" and "11111")
Minimum Password Complex Characters Exchange ActiveSync policy - allows IT to specify how many non-letter characters should be included in the password in addition to letters.
Motorola Mobility Response on these issues:
The Allow Simple Password Exchange ActiveSync policy is not supported on the device and device would not connect to Exchange servers requiring this policy to be enabled. However, this device does support Minimum Password Complex Characters policy which if enabled on the server supersedes the Allow Simple Password setting.
Motorola Mobility is considering adding feature support for all of the Exchange Active sync policy settings in the future.

Similar Messages

  • Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (being PowerPC apps).  Seriously?!?!?!?!!   What are my alternatives?

    Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (apparently because they are PowerPC apps).  Seriously?!?!?!?!!   What are my alternatives?

    Hi Mary and Matthew
    You might find it helpful to "try before you buy" - there is a 30 day free trial offer for Office for Mac 2011, accessible from M's .com website.
    You may be able to use this period to open and resave your old documents in a format that enables you to switch instead to using Apple's iWorks apps moving forward.
    I initially intended to do something similar, but ended up buying Office as it provided an easier way (for me, at least) to continue working with years worth of old emails, letters, spreadsheets and other documents (from my PC days) without risking damage to their integrity, formatting, etc.

  • I cannot sync,back up or add songs to my iPod Touch 5th generation 32 GB-whenever i make changes and click the apply/sync button it takes hours but still it doesn't sync and i can't add songs to my iPod

    i cannot sync,back up or add songs to my iPod Touch 5th generation 32 GB-whenever i make changes and click the apply/sync button it takes hours but still it doesn't sync or add music to my ipod............i thought there was a problem with itunes so i uninstalled it and downloaded the latest version but still the problem continued....the picture below shows how it looks after 28 minutes of syncing........
    The picture below shows all the apple software that i have installed

    - Reboot computer
    - Try another cable and USB port
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • Changing something in the Informations

    Hello, I hope that someone can help me. I will change something in the name of one Titel. But when i open the "Information" than I can't change anything. But in the past it was possible.
    Kind regards
    Michael

    If all you're using Lightroom for is to organize your library I can't see any reason for you to upgrade, unless it's for camera compatibility. With Lightroom, if you're going to rename a folder it's best to do that from within Lightroom. On Windows, all you have to do is right-click on the folder name and choose the Rename option. You have to realize that your photos are not "in" Lightroom. Lightroom simply references your images wherever you have put them on your hard drive. The folder name is a key element in keeping track of where the images are located. If you change the folder name and don't use Lightroom, then you have broken the link that enables the program to keep track of things.
    But all is not lost. If you change the name of the folder outside of Lightroom, the folder will display as missing in your library tree. On Windows, all that is necessary is to right-click on the missing folder and choose the option to update the folder location. Then you can browse to where the images are now located, choose that location and everything is really going to again.
    In my opinion, you are missing out on a lot of wonderful features in Lightroom using it the way you are. However, you know your workflow much better than I.

  • HT201320 i wanted to email my messages history in Viber. But the phone says I can't because I have to change something in the settings. Could someone please tell what to click in the settongs?

    i wanted to email my messages history in Viber. But the phone says I can't because I have to change something in the settings. Could someone please tell what to click in the settongs?

    How could anyone tell you what settings to change when it's not clear what settings you're referring to?

  • The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer.  How do I change that?  The apple id email is grayed out, so I cannot select it.

    The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer.  How do I change that?  The apple id email is grayed out, so I cannot select it.

    Delete and redownload those applications.
    (120219)

  • QT Pro -- Did I miss something in the documentation?

    Someone please check me on this, because I think I must be getting senile. After many years of thinking about it, I finally popped the whopping $30 for Quicktime Pro (for QTP7 on my 27" iMac Core 2 Duo, OS X 10.6.7). It installed without problem -- though it's rather disconcerting that it still looks, smells, and largely acts like QT Player 7. I had a no-fun-at-all-time trying to open video clips that wouldn't open with the In and Out selection markers, so I couldn't trim, or cut and paste, or do anything at all to edit them in a time-linear sense. I DL'd the QuickTime 7 User Guide PDF with the "Getting Started With QuickTime Pro" PDF and read it and re-read it several times, tried QT Pro help, but I couldn't find a single bit of information on why some video formats would open with the In and Out selection markers, and thus be editable, and others would not.
    After 2 solid days of knocking my thick skull against the wall, I finally had my Archimedean Eureka Moment, and realized that ALL the files that WOULD open with the In and Out selection markers were .mov files, while files I was trying to open unsuccessfully were .mpg, .mpeg, m2v, .mp2, mp3, .mp4s, and suchlike. I went back through the QuickTime 7 User Guide PDF AND QuickTime Pro Help, as well as searching here on Apple's support forum, and on other Apple/QT discussion groups, and NOWHERE could I find anything that said files had to be in .mov format to be editable with the In and Out selection markers. Can someone please point out to me the pertinent section of the documentation I must have missed, where that MOST important information is presented.
    In a Hail Mary guess, I thought that perhaps the "QuickTime MPEG-2 Playback Component for Mac OS X" might help solve my problems, though it's description didn't sound that promising: "This add-on to QuickTime or QuickTime Pro provides the ability to import and play back MPEG-2 content, including both multiplexed (also known as muxed, where the audio and video tracks are interleaved together into one track) and non-multiplexed (also known as elementary) streams." Yeah, I got that, but does it do anything ELSE in QT Pro, like give the user the ability to edit.mpeg video with the In and Out selection markers in QuickTime Pro? I could not find THAT information either, and I'm really not keen on plunking down another 20 bucks for a function as simple as playing back .mpeg files, when I have several utilities that already allow me to do that.
    What I'm using QT Pro for right now is chopping up free, non-commercial,non-copyrighted or copy-protected, legally-belonging-to-me, guitar lessons so I can break them down into small sections at a time that I can loop and learn before going on to the next section of the lesson -- very handy. So, I'm sorry, but I don't really think I'm a candidate for the thousand-dollar Final Cut Studio, or even the two-hundred dollar Final Cut Express. I'm retired, and on a fixed income, and I can only afford what I can afford.
    So PLEASE, someone tell me if I'm stuck with no choice but to convert my videos to .mov format before I can edit them in QT Pro, or have I, in my dotage, overlooked another, cost-free way, of actually using QT Pro for what I want to do, without all the monkey-motion of converting everything.
    Thanks for your time,
    Bart Brown

    I may or may not need QT Pro (a moot point, as I already have it)
    As previously indicated, hang onto it if you plan to do any layering, masking, and/or picture-in-picture video composites. It is handy for quick clip modifications not requiring use of a full video editor.
    I DO need the $20 MPEG-2 component (nickel & dime, nickel & dime, nickel & dime, nickel & dime)
    I HAVE FFMPEG X
    I HAVE MPEG Streamclip
    The Apple MPEG-2 Playback component is only needed if you plan to use MPEG-2/M2V content in QT based applications. That is, applications like QT and MPEG Streamclip which access codecs for which your system is configured. Utilities like FFmpegX, VLC, and HandBrake have their own codecs embedded within their respective applications.
    In regards to MPEG Streamclip (and AC3)...
    Rather than try to cover each individual point as you brought them up, let me summarize the situation by enumerating your options.
    1) The Apple QT MPEG-2 Playback component does not support any audio compression formats. It is a video codec only just as H.264 is a video codec. Either the audio is QT compatible or it is not. If it is not, then your best option is to convert non-compatible audio to a QT compatible compression format.
    2) If you really want to play AC3 DD5.1 audio on a Mac, the best way is to use the VLC media player and send the AC3 audio data to an external DD5.1 decoder via the VLC "passthrough" option. (I use the Logitech Z-680 for external decoding and amplification of optical digital or 6-channel analog data.)
    3) No matter what AC3 codec you install on your Mac, for it to work on the Mac, the audio will either have to be mixed down to two channels for core audio processing on the system or you will have to install an auxiliary audio card capable of outputting the AC3 decoded audio as 6 separate channels of audio which can also be handled by the core audio system software. (I use a 6-channel M-Audio card here for audio usually transcoded to either 4, 5, or 6 channels of AAC or AIFF compressed audio data.)
    4) While MPEG Streamclip only supports 2 of the 6 DD5.1 channels at a time as QT compatible audio channels at a time, the user can select which two channels are output. Most users opt for the "stereo mix" option but could just as easily select the "Front Mix", "Surround", "L/R Ch.", "Center Ch.", "LS/RS Ch.", or "LFE Ch." option. You can even make multiple passes to decode/export all 6 channels of audio and attempt to re-assemble them as separate audio tracks, 3 paired stereo tracks, or a single "surround" audio track if you have the required hardware support for playback.
    Anyway, I've DL'd my AC3, I'm buying my MPEG-2 component (which I still think is a ripoff: why leave out ONE critical component -- when you've included dozens of others for free -- and make your customers pay, AGAIN, to make the $30 software you just paid for from the same company into a $50 software package so it will do what you want it to do? To me, that dog don't hunt).
    As has been stated many times, QT is based on the idea that multiple parallel tracks of data (up to 99) can all be played back synchronously using a single external clock. Multiplexed MPEG-1/2 content, on the other hand, employs spatial synchronization—two different technological approaches. By interspersing blocks of audio data between blocks of video data in a single data stream, one form of data is prevented from "overrunning" the other. AVI works in a similar manner using parallel tracks of data. Only in this case, frames of audio data are interleaved with frames video data to maintain synchronization. The main difference here, however, is that, as far as QT is concerned, the frames are only a half frame "out of sync" while the MPEG-1/2 data is "out of sync" by an undetermined degree. Since QT cannot equate a specific time reference to corresponding frames of audio and video content, it cannot properly convert or edit this content. In short, the MPEG-2 Playback component is not a "critical" component since QT was never designed to use it and only added it in response to user requests. As to pricing, If you wish to perform transcoding of WMV content, the Flip4Mac codecs alone run from $29 to $179 depending on what level of capabilities you require. (And you still need the QT 7 Pro key.) Your main problem here is that you are editing in an QT non-compatible compression format designed for content delivery rather using a QT compatible, edit specific compression format. I assume this was a result of have the Tape-DVD recording device on hand and decided this approach was easier than going the more conventional route of converting to DV using a DAC device. As a result, your data is probably compressed to about 1/5 the data rate/size of a DV file. Unfortunately, you will likely have to pay a price in terms of quality and work flow problems. Still, I suspect you would be less than willing to go back to square one with your tapes and re-digitize the content a second time.
    What MORE am I going to need to accomplish that, do you know?
    Whether you are editing a "muxed" MPEG-2/AC3 file or a DVD title consisting of one or more VOB files (also containing "muxed" MPEG-2/AC3 content), the work flow is essentially the same. Simply drop all of the non-zero VOB files in the title set to the MPEG Streamclip work window, fix the timecode breaks, and start your editing as if you were working with a single MPEG file.
    NOTE: unless it has changed, FFmpegX may still be limited to 2 GB MPEG file sizes for processing while I believe MPEG Streamclip has a 4 GB MPEG file size limit. I assume this may not be a problem for you if you are working with "snippets" but could be a problem if edits are merged to overly long files. In either case, the VOBs are encoded to files of 1 GB or less and should not present a problem even if you are working with a multi-VOB title set.
    why do I have to go through the kludge of recording tape to DVD, then sneaker-netting the DVD to my iMac to get the digitized video on my computer?
    You don't. You could have used any analog-to-digital converter device. For instance, many old Hi-8/Digital-8 camcorders and most recent DV camcorders have the ability to convert your VHS output directly to DV content which can be captured in any video editing (e.g., iMovie), dedicated capture (e.g., the free Vidi app) or even QT X/QT 7 Pro applications. The content is digitized in real time to your computer. Files would probably be 4-5 times larger than your DVD or MPEG files, but the resulting quality (depending on the original tape quality) might be better and the content is fully compatible will all QT apps (assuming you don't somehow corrupt the files).
    On the other hand, if I already had all of those DVDs on hand, I might consider using HandBrake to convert them to H.264/AAC files and then simply trim and merge the resulting files for distribution. I.e., Handbrake includes its own embedded codecs and is capable of batch processing files while you sleep or are busily engaged in other activities. And, the resulting files are editable at the frame level in the QT 7 Pro which you already have.
    Why is it that Mini Port on the new iMacs is unable to take direct HDMI INPUT from a digital video source at 1080p natively? It's pretty depressing A) having, once again, to buy some $130 adapter to even GET digital input into the 27" iMac, and B) even if you CAN get digital input, being limited to 720p (Belkin AV360™ Mini DisplayPort Converter for 27" iMac. Belkin's description: Accepts full 1080p signal, provides 720p to iMac) on a 2560 x 1440 display.
    You would have to ask Apple. My guess is that they don't want to get involved in HDCP support issues and besides, previously this port has been limited to output only and is still described as such on the Apple Store Tech Specs web page.
    As I'm nearly 63 years old, I'm absolutely gobsmacked at the progress in computer technology from my first Sinclair Z80 to my Amiga 1000 to my first Mac -- a IIci ($5000!), to now, but I thought the whole idea was to make things easier.
    Still have a few years on you. (Let's just say I'm on the high side of 65 and leave it at that.) I started with the Polymorphic 88, System 16 (S-100, 8080 processor with all of 16 K of memory) and worked my way through an Apple //, Mac 128K, Mac IIci, 8500AV, two G4s, a PPC G5, and am now on my first Intel Core Duo laptop. (The last five are still "in service" and the Poly-88 is somewhere in the storage shed.) They say that a program expands to occupy the memory available to contain it. In a similar manner, as things become "easier," we tend to expand our horizons into more difficult fields of endeavor.
    Do you know of a good place to start to try to learn about this stuff?
    Normally in a case like this, I would recommend you contact your local Mac/Apple User Group and see if they have an active Video SIG. By discussing your goals and available hardware/software, they may be able to find a work flow that meets your needs, minimizes your investment in time and effort, and avoids the need to purchase anything additional. For instance, is it your intention to post media on the internet, archive it for future editing purposes, distribute it to immediate friends and/or relatives, what is more important—time or quality of your content, what do you mean by "clean up," etc? These are likely the questions that will determine which work flows best suits your needs and in which order they should be applied.

  • HT4310 I have the ipod shuffle. It only holds a charge for about 45 minutes.  Is this normal or do I need to change something with the settings?

    I have the ipod shuffle.  It only holds a charge for about 45 minutes.  Is this normal?

    It's not "normal," but lithium batteries wear out over time and eventually are not able to hold a charge, and that is "expected."
    So, if the iPod shuffle is a few years old, and you used it a lot, the battery may be worn out.  If it's brand new (or less than one year from purchase date, you should have it checked under warranty.

  • Did Apple said something about the time ios7 will be able to download?

    Im asking when iOS7 will be able to download in spesific time?

    Apple never announces a time, it will always be between 12:00:01AM Pacific Time and 11:59:59PM Pacific Time on the date Apple announces.

  • ICACLS permissions set... but dont apply without change something in the ACL by hand

    Hello guys,
    I wrote a script for setting up permission on fileserver resources.
    icacls \\server\Client1 /grant "Browsing Group":(S,RD,X,RA,REA,R)
    icacls \\server\Client1\Supervisor /grant "Special Permission This folder only Group":(X,RD,RA,REA,WD,AD,WA,WEA,DC,RC)
    icacls \\server\Client1\Supervisor /grant "Special Permission Subfolder and files
    Group":(OI)(CI)(IO)(M,DC)
    So browsing rights working fine... But the user can´t see the folder Supervisor...(I see the applied perissions on the ACL on folder Supervisor)
    If I add a  custom group/user by hand to the ACL on Supervisor the user are able to see the folder and also have the needed permissions.
    I can also uncheck one special perission from a applied group, add it again and click on OK... then the user are able to see the folder and also have the needed permissions.
    Thank you in advance.
    Kind regards,
    Tim
    MCITP, MCTS, MCSA
    http://directoryadmin.blogspot.com
    This posting is provided 'AS IS' with no warranties or guarantees and confers no rights.
    "If this thread answered your question, please click on "Mark as Answer"

    Hi Tim,
    Would you please tell us how many users have this issue?
    I suggest you uncheck all the permissions on this folder manually, then use
    icacls command to test again.
    If some other groups contain some specific users, and these groups are assigned
    Deny access permissions, then these users cannot access the file. That’s because
    Deny permissions’ precedence is higher than Allow, also,
    explicit permissions’ precedence is higher than inherited ones.
    Therefore, please check other groups and the explicit permissions on this folder.
    Here are some related links below:
    How Permissions Work
    http://technet.microsoft.com/en-us/library/cc783530(v=WS.10).aspx
    How IT worksNTFS Permissions
    http://technet.microsoft.com/en-us/magazine/2005.11.howitworksntfs.aspx
    Best Regards,
    Amy Wang

  • Hello. I'm usin Aurora 7.0a2 and Firefox 5 web browsers. The Windows Media Player 11 plug in doesn't work in Aurora, but it does in Firefox 5. Should I change something in the configuration of Aurora? or just wait a new upgrade?. Thank you very much.

    With Aurora 7.0a2
    Online radios like: http://www.amdelplata.com/envivo.html
    Show a mesagge: "Additional plugins are required to show all content of this page", and there is no sound.
    With Firefox 5 it works good.

    With Aurora 7.0a2
    Online radios like: http://www.amdelplata.com/envivo.html
    Show a mesagge: "Additional plugins are required to show all content of this page", and there is no sound.
    With Firefox 5 it works good.

  • When I try to change ID get the following message:Email address is already verified for another Apple ID

    I just got an iphone 5 and want to establish an apple ID. I have 2 apple IDs: both are associated with my son. One uses my email address the other his. The one using my email adress is being used by him: apps, itunes etc. The one associated with his email address has nothing going on.So... I have changed the latter to be associated with my wife's email so that I might switch the IDs so that his email is connected  with his apps and itunes. No problem. Then, I tried to change the ID with my email address with his (the one I just changed), but I continue to get the message :Email address is already verified for another Apple ID. Does it take time for the system to disassociate his email with an apple ID? Is there something I am missing?

    In my experience, I have seen it take days. However, if the issue still persists a week from now, I'd check with iTS, as they can look up in directory services to see if you've (or someone else) has inadvertently combined this with other Apple IDs...  A very common thing since many users are not aware what they have even done.

  • I just started using iCal and I cannot double-click to add an event. Did I accidentally change something?

    I just started using iCal and I cannot double-click to add an event. I could when I started a couple of hours ago. Did I change something? Can I change it back?

    Kristacattack,
    The tracing results in separate paths. The straight lines show where the open filled paths start and end.
    In the first sample, you may drag with the Direct Selection Tool over the top where the straight lines meet and Ctrl/Cmd+J to join the the paths; you may do the same elsewhere to create continuous/closed paths (hopefully, you will only drag over the two endpoints, otherwise you will have to find and delete superfluous Anchor Points).
    This may be better than just cheating with the Live Paint Tool because the artwork becomes more coherent.
    Edit: Hi Monika.

  • How can I get my phone to stop deleting my changes made in Address book without deleting the changes made on the iPhone?

    On my old Macbook whenever I would sync my iphone, if I had changed something on the calendar it gives me the option to choose between the computer event or the iphone event (so lets say I'm out and I changed the time of my appointment on my phone, when I get home and sync my phone I choose to keep the time I changed it to on my phone, not what's on my computer).
    Now... what's happening is I'm getting the message: syncing your contacts will change more than 5% of the contacts on the COMPUTER. So that means, all the bulk changes I just made in address book on the computer are going to get deleted and replaced with what is originally on the phone. That's not what I want. I want to change what's on the phone with the changes I made on the computer in address book. Make sense? How do I do that? Because I don't necessarily want to wipe out everything on the phone because I don't know if that has been transferred to the address book... So If I added some phone numbers within the last month (i don't remember the last time I synced my phone), then I would loose them if I chose to replace information on the phone with what's on the computer (there's an option to do that under info when syncing).
    Does that make sense? Please let me know it this is at all confusing. I'm really trying to resolve this before Saturday early morning ... My mom is going out of town and it's her work phone, so I need to figure this out for her. Thanks a bunch!

        mnjclark,
    I'm glad to hear that you have found a work-a-round so that your device works while making calls meanwhile being connected to Bluetooth to your automobile.
    At this time, based on the way the device was manufactured, there is no setting available that will allow this change to be permanent. When the device is rebooted, the settings may be adjusted which will require you to manually change back to CDMA only mode if needed.
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • ADF :  Value change listener for the whole jsff page

    Is there any feature to have a value change listener for the whole jsff page ?
    How to know if user has change something in the page i.e. how to know whether the page is dirty ?

    User please tell us your jdev version!
    Read this blog https://blogs.oracle.com/groundside/entry/ever_wondered_how_uncommitteddatawarning_works
    Timo

Maybe you are looking for

  • New to the touch phone need help...

    I need to transfer my pics on my old samsung flip phone to my new android..is this possible and if so, how?

  • Error while running exe (error 10)

    Hi,i am not able to run and build exe and getting error like exe is not corporate whitelist and will not be allowed,but if i run it in other system its running  without any error,particularly in that system this error is coming,but one thing is befor

  • Help with transferring ITunes media files to external HD

    Hi! I'm trying to free up space on my MacBook by moving all my ITunes media files to an external HD. I followed the support instructions which told me to go to ITunes preferences, advanced, and choose a new location for the files. I did that part and

  • Why is there a space!!!

    Dear All All pages from a particular folder have a gap/space/return at the top of the page. The css has the top margin set at '0'. any other ideas?? Thank you as always

  • Why can't I delete photos from my album?

    I created an album today and am trying to sort through it by keyword to check that each photo is labeled correctly. I have been doing this by going to the search box below and choosing one keyword. However, iPhoto will not allow me to delete any phot