Did I launch Carbon Copy Cloner right?

I have two accounts on my iMac: The admin account and my personal user account. I did my first backup this evening using Carbon Copy Cloner and was prompted to add the admin logon and password as whenever I download something. However, I launched the application from my personal account. Was I supposed to back up while logged on as Admin or does it macht nichts?

CCC requires root based powers to clone the entire OS X drive/partition of everything so one can hold the option key and boot from it.
So with the Admin name and password (in a General User account), CCC gains access to root user and can perform it's task.
If you ran CCC from a Admin account, it would only ask for the password.
So either way it doesn't matter it still works.
I run a General User account too and I use CCC.
BTW, CCC is installed into Applications which is a global folder, Admin can read and write, General can only read.

Similar Messages

Mountain Lion's Privacy Works Great - Carbon Copy Cloner Wants Contact List Access

Mountain Lion Woke Me Up - Carbon Copy Cloner Wants to access my Contact list
I got a message when I launched Carbon Copy Cloner that it wanted to access my contacts list
BYE BYE CCC - UNINSTALLED IT
i have lots of apps, and this one was the only one that broke my trust. How many more will there be.

Wow, fast answers!
William Kucharski has it right, though: It's asking in order to pre-fill registration fields. This is related to 3rd party application "sandboxing" in 10.8. You can see which apps are using your contacts in Sys Prefs > Security & Privacy > Privacy
If it makes you feel uncomfortable (and it will come up again and again from here on in in OS X), the thing to do is say "No" in the dialogue and continue using CCC and other apps.

External Hard Drive Unreadable After Carbon Copy Cloner Backup

I am using a Maxtor OneTouch III Media external drive. I had formatted it to be read/writeable from Mac OS X 10.4 Tiger, and had been reading and writing files fine. Then I did a system backup to the external drive with Carbon Copy Cloner. Now when I plug the drive into the USB port, it says "the disk you inserted is not readable by this computer." I am guessing that Carbon Copy Cloner may have messed with the file system format. I had some pretty important files on there and would like to retrieve them, so I'd prefer not to reformat.
Disk Utility shows this information for the drive:
Name : Maxtor OneTouch III Media
Type : Disk
Disk Identifier : disk1
Media Name : Maxtor OneTouch III Media
Media Type : Generic
Connection Bus : USB
Connection Type : External
USB Serial Number : RA09E5XC
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 149.1 GB (160,041,885,696 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Also, Partition Scheme : Unformatted
I know that the drive had a name (besides the generic "Maxtor OneTouch III Media) before I did anything with Carbon Copy Cloner. Is my data already gone?
Message was edited by: theleez

Hi , and a warm welcome to the forums!
I think the problem is more the One-touch, they can't boot PPC Macs even via Firewire.
I think you'll have to Reformat it again... did you maybe use GUID Partition Scheme the first time?
See this, except for the GUID part...
http://carlbach.blogspot.com/2008/02/maxtor-one-touch-iii-and-formatting-on.html

HELP! Has Carbon Copy Cloner Killed This G5?

I've got myself into a right old pickle, and wondered if any of the Mac faithful would be able to share any bright ideas on how to proceed.
Essentially, here's how I spent my Bank Holiday;
Mission - To completely clone the 150GB System and 230GB 'Projects&Sounds' internal drives on a Dual 2GHz G5 - both drives over 99% full. OS=10.3.5
Began by downloading SuperDuper only to find Sys Reqs not met. (10.3.9 required).
Used Carbon Copy Cloner to duplicate 230GB Internal to 240GB partition of 400GB Ext FW800 drive - all good.
Used CCC to move 56GB of files from 150GB Ext FW400 drive to 130GB partition of 400GB Ext FW800 drive - all good.
Used CCC to clone internal 150GB System drive to 150GB Ext FW 400 drive. 'Bootable clone' selected.
At end of cloning process, with roughly 1GB left to go, CCC hung up.
Force quit CCC yielded no result.
After 2 hours, whole system was frozen, including menu-bar clock & dock. Hard restart from power button.
Stalled at grey screen - Apple & spinning cursor
Disk utility verified all clones OK - backups intact. Initial side by side check reveals all files seem to be present.
Mission now to get G5 going again.
Hooked up 1st G5 by firewire Target Disk Mode to 2nd G5.
Ran Disk Utility on 1st G5's System drive from 2nd G5. Error reported; "The underlying task reported failure on exit (-9972)" Also reported "Keys out of place" Failed to verify/repair.
Installed Disk Warrior 3.02 on 2nd G5 & ran on 1st G5's System drive. Reported major differences between original and rebuilt directory in preview, chiefly in HD Library (App Support) & System Folder.
Made note of differences and rebuilt directory of 1st G5's System drive with Disk Warrior.
Rechecked with Disk Utility, 1st G5's System drive appeared fine this time.
Attempted to boot - stalled at grey screen - Apple & spinning cursor
Booted 1st G5 into Single User mode; fans screaming; reported
"Can't open Library: / System / Library / Frameworks / CoreFoundation.Framework / Versions / A / CoreFoundation (No such file or directory, Errno = 2)"
Ran fsck, all good.
Exited Single User mode, Finder failed to launch.
Relaunched Target Disk Mode, copied missing file from clone back to original.
Attempted to boot - stalled at grey screen - Apple & spinning cursor
Booted into Single User mode; reported huge screen of gobbledygook (see pic!)
Attempted to reinstall System 10.3.4 (Archive & Install) from Install disk - got first kernel panic
Would not boot from install disks
Ran Apple Hardware test - test would not run
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Apple PowerMac7,3.5.1.8f2
BootROM built on 05/21/04 @ 10:56:59"
Reinstalled system 10.3.4 over firewire Target Disk Mode from 2nd G5 using Install disks.
Attempted to boot - Kernel panic.
Ran Apple Hardware test again - test still would not run.
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Apple PowerMac7,3.5.1.8f2
BootROM built on 05/21/04 @ 10:56:59"
Unplugged all FW & USB peripherals
Removed all but 2 of RAM chips (8 x 1GB DIMMS installed in machine altogether)
Attempted to boot - Kernel panic.
Swapped RAM around in pairs
Attempted to boot - Kernel panic.
Ran Apple Hardware test again - test still would not run.
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Ran out of ideas, patience and hair to pull out. Went home to sob on the wife's shoulder and hug the cat.
Now what?
I have to get this computer working again fast!
cheers, and sorry for the long post
Dave
G5 2GHz Mac OS X (10.3.5)
G5 2GHz

Just an update on the situation;
First of all, many thanks you guys for all the replies and helpful suggestions - I was a few millimetres from the end of my tether when I first posted.
After I ran DiskWarrior on the System Drive, it appeared to be OK according to both DU and fsck, so I was able to do another backup copy of all the important stuff. I'd already used Target Disk Mode to create some space on it, prior to my Archive and Install of 10.3.4 over firewire. This still had no effect, however.
As luck would have it, yesterday morning a mate of ours who is an audio systems tech was in the building on another job, so he popped by to have a look. When I opened it up, it was like it had been found in the middle of an ancient pyramid, brown sandy dust all over the fans and the heatsink. We performed a PMU reset, swapped the ram around again, unplugged the HDs and attempted to boot from CD - still no joy. Quite a lot of swearing though.....
My techy mate confirmed my worst fears that it is most likely a blown processor or logic board. We're going to swap in another system drive today just to make sure, but it doesn't look good. Fortunately, he was able to loan my colleague another machine to use whilst the G5 goes away to sickbay for diagnosis and a no-doubt costly repair, but we still had to reinstall and reauthorize the mountain of plugins (over 250!), then copy over more than 100Gb of project and audio files from the backups, which took until 10pm last night to accomplish. We'll have to do the same thing again if and when the original machine comes back from repair.
I'm devastated, this is exactly the disaster I was trying to avoid in the first place. I didn't know you could clone from DU (thanks Tom) - if I did, I probably wouldn't be in this mess..... you live and learn, eh?
This morning though, everything seems to be running fine, the temporary G5 is performing well. Three days behind schedule, looking at a possible £1500 repair bill, but at least we can get some real work done now!
Thanks again to everyone
Dave
G5 2GHz

Can I Use Time Machine With Carbon Copy Cloner?

As of today, I upgraded my iMac (and eventually my Macbook) to Snow Leopard. I used Carbon Copy Cloner to create a clone of my drive to my external (I did a clean install) and now that Snow Leopard is installed, I only want to put back on to my computer just certain files, such as a select selection of my documents, some of my iTunes library, etc. Given that I couldn't find that option in Migration Assistant, I just manually copied over what I wanted from the clone on my external.
Still, I would like to keep a daily backup for my iMac's HD and that's where Time Machine comes in, but there's some questions I have before I do it:
Given that my iMac's HD now has significant free space (as I only brought back, say, 10% of the stuff to my iMac from my external when I cloned on CCC), if I enabled Time Machine to back up my iMac's HD stuff, it wouldn't overwrite the 90% of stuff on my external with the 10% that's on my iMac's HD, would it? For instance, I have about 20,000 songs on my external drive, but maybe have brought back only, say, 5,000 to my iMac (for now). Given that my iMac's iTunes Music folder shows 5,000 songs on it, when TM backs that up to my external drive, it won't overwrite the other iTunes Music folder which has the other 15,000, right? The same thing could be applied for documents, photos, etc. If not, how would TM deal with that? I would hope to avoid the other extreme, which are duplicate files/folders.
I guess I just want to be able to have the ability to get into that cloned drive on my external if I need to add more stuff to the iMac or if I need it one day to boot up the machine. But I also want to be able to have Time Machine at hand to back up daily the little that is on my iMac right now. So I suppose I'm wondering how can I achieve this without the two conflicting or screwing up?
Thanks!

MM1010 wrote:
when TM backs that up to my external drive, it won't overwrite the other iTunes Music folder which has the other 15,000, right?
Correct. Time Machine won't delete anything else on the same volume.
But as Barry says, it will use all the empty space available, before it starts deleting its oldest backups, so there will eventually be a conflict. See #3 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum). Also see #1 there, to be sure you have enough space for Time Machine to keep a reasonable "depth" of backups.
A better bet, however, would be to use a separate external HD. If you have the Time Machine backups on the same physical HD, when it fails (and they all do, sooner or later), you risk losing both.

Reinstalling and Carbon Copy Cloner

I mistakenly posted my question to an 'answered' thread, so will re-post it here. Apologies for the duplication!
Hello Good people on this Mac Forum.
I need your help. Here's the situation:
I'm running OS 10.3.9 on my powerbook G4, which I divided into 5 partitions when I first set it up, a couple of years ago now.
The trouble is that as I grow and my computer grows with me, the partition where I store my hard drive files just isn't big enough to keep up (I have less than 1GB free on this drive and obviously keep getting 'full' messages).
I've already moved most of my applications out onto another partition (months ago now), which has caused various small problems (e.g. I can't open PhotoShop or Dreamweaver files without opening the application first), but the hard drive keeps exanding as I receive emails and blah blah and now it's to the point where I don't even have room on my hard drive partition to receive a podcast, or download a new album to iTunes.
I have plenty of room on other partitions, so my thought is to get rid of the partitions altogether and open my computer up into one large hard drive disc again.
The folks at AppleCare have told me I need to boot from my Software Install and Restore disc and erase the whole disc; then go through the re-installation process.
The problem is that installing from my 'Software Install and Restore' disc will take me back to where I was when I bought the computer (Jaguar), while I am currently running Panther with the benefit of all those years of software updates, etc. I would like to save myself the time and trouble of redoing all this work if at all possible.
I've backed up all my current files on an external drive, using Carbon Copy Cloner (which is partitioned to exactly mirror my computer). What I'd like to do is just get a clean slate on my computer and transfer everything from the external hard drive over onto it. In other words I want to have one drive on my computer, and keep everything exactly as I have it now (sans the partitions).
Has anyone done this before? The AppleCare folks can't help me with the transfer because they are officially unable to advise on anything involving third party software (in this case CCC). They suggested I come here with my question, where people are not constrained by the same rules.
I had originally imagined I could just go through the installation process with my 'install and restore' disc, and then drag and drop (or clone) my backed up files over the new install, replacing them, but they said there might be problems with that. Has anyone had experience with this?
Another solution might be to erase my computer's hard disc, and then boot up from my external drive and clone the backed up files directly onto the empty disc. Would that work? I'm not sure how to boot up from my external drive, or make sure that those files are bootable, however.
Unfortunately I can't find my Panther OS install disc (it's somewhere in a box in the basement that I haven't unpacked since moving), which I'm sure would make the whole thing easier.
Any thoughts or advice for would be very much appreciated.
Amy

Hi Grant,
Thanks for replying!
I've done it several times. The only thing that I'm
not sure of is how you go from several partitions
back to one
This is what I need to do, yes. Are you saying you haven't actually done it? (I too have gone from one to several partitions, and also from several back to one -once- but I didn't need to replace files from an external back up that time.)
(your backup must be to several different
partitions, right?)
Yes, my back up is an exact mirror of my current set up, with the same partitions.
Before you do this, make sure that your backup on the
xternal drive:
1. Is on a firewire, not USB drive
Right - it is.
2. You marked "make bootable" on CCC
I did that, yes.
3. Make sure it actually boots
How would I check that? I don't know how to start up from the external hard drive.
All that said, there are advantages to doing a clean
install.
I'm not sure what you mean by this - do you mean just install through my 'install and Restore' CD?
Its not a bad idea, so long as you can back
up and restore just your files. Most of the updates
will happen automatically (except apps and 10.3.x),
But these are the updates I'm concerned about. There are a LOT of them - I am a web designer and regularly use a LOT of applications. I don't want to reload every one of these, and go through all the updates again. I have deadlines to meet and need to spend the shortest possible time on all this and be safe and smart about it.
and you know that its clean and uncorrupted.
Nothing is corupted now, that I know of. That isn't really the problem.
But you
can always do that later, after the clone, if you
have a problem with it.
I'm not sure what you're referring to here, but I do appreciate the support, especially since it sounds like you use CCC. Can you tell me know to check to see if my backed up systems partition (on the external hard drive) is bootable? Thanks so much.
Amy

Booting Carbon Copy clone on Retina Macbook

First time posting on the forums, I hope one of you guys can help me out :-).
I bought a Retina Macbook a couple of days ago, and rather than migrating with Setup/Migration Assistant from my old MBP (2.26GHz, running 10.7.4), I wanted to start fresh & manually migrate the stuff I want to keep for the new machine. My intention is to wipe the old MBP with a fresh Lion install for my wife. As a precaution (in case I forget something crucial) I made a Carbon Copy clone of the old HD, saved onto a 2TB Seagate Backup Plus external drive. The Seagate is USB3, with optional adapters for Firewire and Thunderbolt.
I formatted the drive & setup 2 partitions, both MAC OS Extended (Journaled), GUID partition, one for the clone, the second for general storage, and the clone process went smoothly. I checked that I was able to boot from the clone on the old MBP, with no problems. However, when I attempt to boot the clone on the Retina MBP, I get the grey screen & no entry sign. Same if I try through system prefs, startup disk.
Does anyone have any ideas why the clone will boot onto the old MBP, but not the Retina?
Your help is appreciated in advance.

Nope, I have just gone through all of this and I now got a brand new, pre loaded MBP retina and 3 geniuses all said that b/c the firmware is different that we can't boot from a cloned drive from a different computer.
This is weird, as I have cloned across iMac to Macbook and didn't get an issue.
I did the 10.8.1 update and still no joy so unless there is something we need to change in the boot files on our clone we are stuck with a drive that mounts yet doesn't boot.
If it were simply a software issue then the drive wouldn't mount or we couldn't access all of our files on the clone right?

On a Mac mini OS X server 10.8.5 TimeMchine cannot copy 2.5 TB to a 6 TB Thunderbolt disk, runs out of space, Carbon Copy Cloner works perfectly

On a Mac mini OS X server 10.8.5 TimeMachine cannot copy 2.5 TB (from a Lacie 2big Thunderbolt data disk) to another 6 TB Thunderbolt disk, runs out of space, Carbon Copy Cloner works perfectly: claiming just 2.5 TB after the copy. Thunderbolt disk is
LaCie 2big Thunderbolt Series 6 TB

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

What exactly is a Carbon Copy Cloner and does it work on iMac Intel?

A friend of mine recommended to me that carbon copy cloner is the best way to back up data including applications and that it is a freeware downloadable via their website. Can anyone explain to me (using layman's language) what exactly it is and give me a step by step procedure on what I have to do to make it work? Also, does it work on iMac Intel and if so, would I have to set anything differently??
FYI, I do have a La Cie firewire drive.

Did you check out their website? It really has a lot of info, but here it is in a nutshell.
CCC is a cloning software tool. It will make an exact - and bootable - copy of every last bit and byte on your internal drive. You can then use that FireWire drive to boot up your Mac, or restore the data from it in case of an emergency, drive replacement or failure.
It is not universal yet, but it does run through Rosetta.
Download the program and there is a PDF file with all the step by step instructions, but it is really easy to use.
BTW, LaCie has a program that is very similar called SilverKeeper.

Firefox crashes after Carbon Copy Cloner

I powered on the computer, and did not open anything other than Carbon Copy Cloner. I then copied one entire hard drive to another. Everything works, such as Thunderbird and Opera Next, except for Firefox! As it's my primary browser I have spent an hour or two trying to work out a few things. This was the second Carbon Copy Clone I did and it didn't state any errors during the copy process. Firefox was working flawlessly on the other hard drive.
If I open Firefox it goes straight to crash reporter - no Firefox window. If I try and open profile manager the same happens, and if I try and open in safe mode the same happens. I have tried repairing disk permissions. There is no sign of Firefox being open in Activity Monitor

please see this article and follow steps to send us the report of your crash
[[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]

Finder crashes when backing up time machine or carbon copy cloner

I'm trying to create backups of my system, i did have time machine running to a secondary drive internally, but that stopped working at some point and i assumed it was a bad partition.
Everytime i try to create a backup through timemachine it would crash the finder (though it would never create a crash report, just hang) i'd have to hard crash my machine to get it running again.
I verified and repaired any permissions, dumped pref files but still no joy.
I've now bought 2 new drives for clone / backups, thinking the drive is perhaps corrupt.
My plan was to use carbon copy cloner and clone the main hdd as a safety,( incase it was a time machine issue) but its doing the same with CCC-
when i hit clone the finder window pops up asking for my admin password, but beachballs and wont let me type anything. i can select anything with the keyboard (i.e. Jump between programs, or force shutdown running apps) i can shutdown using the file menu but i can close any open windows.
I can copy files manually, but i want a bootable backup of the main hdd (i'm a video editor and reinstalling an entire suite is not good when on a job)
Can anyone suggest a workaround to cloning the main hdd (even if it does have a bug in it, i'd rather have something safe before i do a fresh install)
Cheers

That should read 'CAN'T select anything with the keyboard or finder'

Upgrade of a hardrive with carbon copy cloner

I upgraded my daughter's macbook hardrive and used carbon copy cloner to transfer all the mac stuff over to the new drive. It worked great but the windows stuff did not move with it. she uses boot camp and has not upgraded to leopard yet but has the most recent version of tiger. Is there a way for me to move in total her windows in boot camp without reinstalling it from the beginning?

Hi,
two things you can try:
If the BootCamp Windows uses the FAT32 file system, try this: http://discussions.apple.com/thread.jspa?threadID=717201&start=0&tstart=0
if it uses the NTFS file system, have a look at WinClone: http://www.twocanoes.com/winclone/
Good Luck
Stefan

SuperDuper or Carbon Copy Cloner, which one to use in my case?

Let me start of my saying what i am going to be doing...
Right now i have Panther on my Mac, i am going to install Leopard and do a clean install which will erase everything on my Mac's HD, so i bought a external FireWire HD to backup all of my files , i was actually just going to backup my music, pics & videos but then i was told that the best thing to do is to backup the whole HD (don't know why this is necessary).
So the carbon copy cloner is the most popular here on the forums while Super Duper looks like it's very simple to use, the only problem i see with Super Duper is that it's not Leopard compatible but i don't see that as a problem in my case since i am going to be using Super Duper with Panther and then i am assuming that i can manually drag and drop files i need ( music, pics and videos) back on my Mac's HD after i install Leopard, am i right here?
Please reply with any advice you have or suggestions, greatly appreciated if you will, thanks in advance.

Marat Voznyuk wrote:
i was told that the best thing to do is to backup the whole HD (don't know why this is necessary).
Because that allows you to revert to a known, good, bootable OS, in case your Leopard installation fails. It also allows you to simply use the Migration Assistant with a successful Leopard installation.

MacPro wont back up to Time Machine or Carbon Copy Cloner?

I am running 10.6.8 on my 2 x 3 Ghz Intel Mac Pro with 10 Gb of Ram. I have been backing up my two internal drives to an external 2 Tb WD for over a year using time machine and it would lose the drive every once in a while but I could get it back. Now after multiple erasures and reformats I can't get Time Machine or Carbon Copy Cloner (not at the same time : ) ) to run any faster than 1Gb/13min. Just my big ol' music drive will take 6 days at that speed!
I know there is something wrong for these speeds to be this slow. Does anyone have any suggestions of ways to speed up transfer and get the data flowing freely like it should or even theories about what's going on? I am using USB 2.0 from the drive to the tower. Cheers.

First what interface did you use? USB2? can't and expect any decent backup performance and forget zeroing a drive. FW800? on some WD MyBook, yes.
I would if possible move it into a FW800/400/eSATA drive case from OWC.
Add a PCIe SATA + USB3 CalDigit card and use that.
Move the drive inside an option? some WD MyBook can't, were built around the external drive case.
Your profile is out of date 10.4.11 is way old and didn't include TimeMachine (10.5 Oct 2007)
Lion and ML are better at Disk Utility and managing disk drives.
I use WD Green, very inexpensive, but no MyBook (yet, maybe USB3 NAS some day).
Why keep your data on one drive that has been beaten to death and not try a WD Black or couple other drives - or do you have those just not listed? Clone your system, clone your data, and even a spare TimeMachine... but I would go with two system backup drives. That is safe, and covers anyone's important system and media and digital library needs.

Carbon Copy Cloner Problem: Can't see my Macs HD when selecting Target Disk

I cannot find an answer anywhere on the net, so I'm trying the trusty Apple Discussions forums. Using Carbon Copy Cloner, I backed up everything onto an external HD and I erased everything from my G5 and reinstalled the software it came with. I then also reinstalled Tiger OS X and now, using CCC, I chose all the original backed up volume from my external HD as my Source Disk, but when I try to save them back onto my G5's HD, I cannot see my Macintosh HD under CCC's Target Disk options. (Note: I recently did exactly the same thing with my iBook using CCC and I was able to see the iBook's HD under CCC's Target Disk options without any problems).
More info: I'm trying to do an Incremental backup, though I tried the "Backup everything" option too (which, incidentally, would defeat the purpose of erasing and reinstalling) just to see if my Macintosh HD would show up under the Target Disk, but it still didn't.
I would really appreciate it if someone could tell me how to get my Macintosh HD to appear under my Target Disk options on CCC. Thx.

I was able to figure out what I was doing wrong on my own
Well done! but you don't need to be "on your own" - you would do well to:
•  use the link that 'baltwo' gave you and at the very least look at Announcements and Stickies
•  use CCC Help available online here or (same docs) from the CCC Help menu.
Andreas   Bombich Forums Moderator

Did I launch Carbon Copy Cloner right?

Similar Messages

Maybe you are looking for