Did iDVD delete my FCE HD movie?!

I exported a FCE HD movie to iDVD for a burn. Now I can't find the project file. I checked the pref pane on iDVD and looks like it defaults to deleting rendered files after it burns a DVD. Did it delete my movie? I can't find the sequence in FCE HD. I can not figure out what is going on! Help!

Walked away, came back, clicked open the project''s icon, and it opened up perfectly intact. Am going to do some diag's on the machine today.

Similar Messages

  • IDVD won't recognise FCE output movies. Also has bad artifacts.

    Recently upgraded to new iMac and Final Cut Express.
    Have a problem with making a DVD of my first project in FCE. Of three sequences I've cut and exported to Quicktime, as per instructions, iDVD will recognise only one. That is, only one of the .mov files shows up in the "media" folder in iDVD. So I can bring that into the iDVD project and it plays, but with very noticeable motion artifacts. The other two sequences, (all done on the same day with same settings on camera, HV20), they don't show up in the "media" box, but if I drag them on to the iDVD page they play, but with very bad motion artifacts.
    Anyone got any tips on what's happening here and how to work around it?

    I am experiencing the same problems but have found a workaround. Although iDVD will not recognize the movie in the media window, you can drag the movie file into the main window and iDVD will accept the file. I have also found that if you use the "export using quicktime conversion" rather than the "export quicktime movie" you get better results (fewer artifacts). I used Photo JPEG settings at 100% and saw great improvement - - it took longer but it was well worth it.

  • HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac.  It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me.  However they did not delete the Library from my

    My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac.  It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me.  However they did not delete the Library from my iMac (that's my responsibility).  I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied.  I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
    How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

    the new backup drive
    I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
    I am unable to search either in email as well as Finder.  I AM able to search within iPhoto though, thankfully
    Spotlight may still be busy rebuildig its index.
    You could try to rebuild the Spotlight Index, if you do see no progress:
    Spotlight: How to re-index folders or volumes
    I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

  • Can't delete, rename files, or move to another folder

    I had posted earlier about not being able to delete, rename files, or move to another folder. It never was resolved here, and I guess Apple still hasn't done anything about it. Here's a great workaround I found though in case others need something. Download the program called "Unlocker", it's free and you can get it at http://ccollomb.free.fr/unlocker/ When you get the message about the file being in use, even though QuickTime isn't even open, you can unlock the f'ing file and do whatever you want to then, move, uh DELETE, or rename, or whatever. Try it, it's the best thing going so far seeing Apple isn't doing anything about this problem.

    Hi there,
    I am still struggling with this problem. Actually my coworker has the same machine, Apple pro with windows xp installed, but he does not have this problem with his quicktime 7.5. I uninstalled 7.5 and installed 7.2, but it did not solve the problem. The fact is that I don't have the problem in my laptop which I am using it in the office. I am still trouble shooting. Hopefully I can find an answer.
    Peace

  • I made a movie using iMovie. I went to share and selected idvd. It processed the movie,but nothing happened. The tutorial shows icon on bar,but I can not find idvd. What am I doing wrong?processed

    I made a movie in imovie. I went to shate and selected iDVD. It processsed the movie for about 5 min. When it finished I did not have the icon at the bottom of screen like the tutorial displayed. How do I find iDVD?

    Check in your Applications folder to see if you have the iDVD application there? 
    Do you have a new Mac that came with Lion preinstalled?  If so you won't have iDVD nor iWeb.  Apple has discontinued iDVD and iWeb and is no longer selling them.
    In that case you'll have to purchase the boxed iLife 11 disc from a 3rd party retailier like Amazon.com: iLife 11.
    Also it's best to use the Share ➙ Media Browser menu opiton in iMovie and then add the movie from the Media Browser in iDVD to the iDVD project.  It provides a better qualtiy movie to iDVD. 
    Also follow this workflow to help ensure the best quality final product:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • IDVD won't load the mov

    I don't understand, in the past I move the .mov onto the project and it, in the status part, begins loading. But it doesn't do that, it doesn't even load in. Is it because it is so long perhaps??
    thanks
    Kate

    you gave us very little info about your problem, Katherine.. :-/
    iDVD doesn't accept all kind of .mov, mov is just a container, containing (sic!) many formats... not all are supported by iDVD... where did it come from, that misbehaving .mov?
    secondly, iDVD accepts projects of max. lenght of 120 minutes... the size in MB/GB doesn't matter... e.g. if you try to burn a highly compressed .mov containing some h264/mpeg4/divx/whatever... data of letssay 1GB size, but 180min length, that doesn't work with iDVD....
    reading "iBook" in your specs:
    make sure, you have at last 10 - 15GB free on your internal drive AFTER you have imported your movies into iDVD to make the app work flawless....
    helpful?

  • CS3 Uninstaller Did Not Delete All Application Files

    A few months ago, I purchased a new MacBook Pro. When I did that, I used Apple's migration assistant to move my programs from my old MacBook to my new MacBook. The Adobe CS 3.3 applications were migated. I recently purchased the upgrade to CS 5.5 Web Premium. I wanted to uninstall CS 3.3 before installing CS 5.5 to save hard drive space. So, I ran the Adobe Uninstaller (Applications > Utilities > Adobe Uninstallers). The Adobe Uninstaller could not find any Abode Products on my MacBook, although they were clearly installed and working. So, I reinstalled CS 3.3 and then tried the Adobe Uninstaller again. This time, the Uninstaller found all of the product and said that it uninstalled all of them. However, it did not delete the application files from my MacBook. I then attempted to run the Adobe CS Cleaner and that also did not delete the application files.
    How do I go about deleting the application files?
    Is it safe to simply drag the folder for each CS application to the trash at this point?
    How can I remove Version Cue CS3 from my System Preferences?
    Thanks!

    You should find the uninstaller for Acrobat 9 within the Adobe Acrobat 9 Pro folder.  Once removed then remove any other Adobe application folders you have listed from the Applications folder.  Beyond that you can also find files for the Adobe applications listed in the following locations:
    /Library/Application Support/Adobe
    /Users/<UserName>/Application Support/Adobe
    /Applications/Utilities/Adobe Installers/
    /Applications/Utilities/Adobe Utilities/
    You may need to reinstall Flash player and Shockwave after this procedure but it should remove the files used by CS3.  You can then try the CS5.5 installation at that point.  I would still caution that if you run into problems with the installation or even run into a problem removing Acrobat 9 that it will still be more efficient to step back and restore the Mac OS and run the Migration Assistant again as previously advised.

  • I cannot find my photo's on iphoto's and I did not delete them where could they be?

    I was transferring photo's from a camera to my Mac and now I cannot find any of my photo's that were in my Iphoto's libary, I did not delete them, where else could they be?  Or can they be recovered if they have been trashed?

    First, don't try to find and reimport or move photos via the My Photos search in the left hand pane of a Finder window.  That's a sure way to further damage a library. 
    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Burned FCE DVD movie jerks, stops

    On several occasions, on various DVD players, my burned FCE DVD movies have either jerked, or quit in the middle of the presentation. Am I doing something wrong in exporting the FCE movie, or choosing the wrong iDVD commands in preparation to burn the DVD. I as well as my customers are getting frustrated. I've had other querks using the iDVD 6. Any advise would be much appreciated!

    After I have completed the movie in FCE, I export it as "QuickTime movie". I then open iDVD, choose my theme, drag the movie into the theme, choosing the fade through black transition (because the DVD's are shown on an iMac for funeral visitations and need to be looped. If I don't choose a transition, the DVD will not loop, a glitch in the iDVD 6), then I click on "show the DVD map", click on the movie, choose advanced/loop. I then burn the DVD. The first time a movie jerked, stopped, I was convinced it was the DVD player. But since then, the same thing has happened on other DVD players, as well as on an iMac, on several occasions. Al, I appreciate any light you can shed on this. Thank you so much.

  • Where did iDVD go?

    Where did iDVD go?  How do I access iDVD?  I used to just drag my mp4's straight into iDVD and create my DVD's but it is no longer available.  Help!

    Yes, there are programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is easy to get. It is available on disk as part of iLife 11.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • On 10.4.11 Mac Mail I get this: Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unnedded documents or move documents to another volume. I can't open mail.

    On 10.4.11 iMac Mac Mail I get this message: "Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unneeded documents or move documents to another volume." I can't open mail to do this. I have reinstalled software but no effect. How do I get into Mail to delete?

    Found this on the "more like this" Worked like a charm!
    With the Mail.app quit and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
    Go to Home > Library > Mail > Envelope Index. Move the Envelope Index file to the Desktop.
    Launch Mail and you will be prompted to import mailboxes. Select OK and allow the import process to complete.
    After confirming all mailboxes were successfully imported and available, you can delete the copy of the Mail folder and old Envelope Index file from the Desktop and this should resolve the problem.

  • Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

    Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

    Hello, eco1. 
    Thank you for visiting Apple Support Communities. 
    This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location.  If this is the case then I would recommend taking a look at the article below. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Cheers,
    Jason H. 

  • Hi.  I down load all of my pictures to iPhoto.  I was removing some even folders to make room, but DID NOT delete any of the ones I needed (and there are a lot of photos as I am a photographer just starting out).  All of my photos are gone.  ALL of them.

         Can anyone help me.  All of my photos from iPhoto are gone.  There are three weddings that I photographed and may other sessions (I am a brand new photographer and this is going to kill my business).  I am so sick to my stomach.  I was deleting some even files due to the fact that the start up disk was almost full but DID NOT delete everything.  I finished what I was doing and then went to dinner.  I came home to do more editing and EVERYTHING is gone.  EVERYTHING, but the iphoto program was still there.  Is there any chance that these pictures could still be somewhere on the hard drive?
    Thank you,
    Kari

    Did you use the finder to delete any photos that are in iPhoto?
    If so you have trashed your library - you choices are to put it back EXACTLY like it was, restore your backup or start over (right click on the iPhoto library and show package contents, drag the masters folder to the desktop, create a new library and start importing
    NEVER make any changes of any sort to the structure or content of the iPhoto library - ONLY use iPhoto to manage yoru photos
    LN

  • TS3899 I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month o

    I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?

    I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?

Maybe you are looking for

  • JDBC 2 on Oracle 8.0.5 on linux ?

    Hi there; I can't find oracle package for JDCB 2.0. In fact I need connection pooling and scrollable cursor features. Please save me ! null

  • Photo Booth - Problem with filenames

    Hi. I just noticed that Photo Booth names pictures taken in a curious way... This is the name of a photo taken a few minutes ago: Foto del 65353972-09-2455450 alle 18/09 (don't care about the words being in Italian ) The number indicating the month i

  • Error Message NSURLErrorDomain error -1012.

    I get this error message when I try to update.  I had just downloaded Safari Version 7.0.4 update 2 days earlier.  What can I do to resolve the issue?

  • How to show an entry with specific ID from spry xml dataset?

    I have a spry xml dataset, can I show only one record specified by, say, unique ID?

  • Help Me , can't find what is wrong :S Simple code

    Hello everyone, im'm back =P ...well the problem is : I can't find what's wrong with this code above. The output shoul be "-1" but it prints -4 , it should print the min. value of an array. An absolute value to do that , its simple just do: e.g ( if