Did latest itunes update (10.6.1) now album art and video showing as white square

Friday night (30 March) had itunes update. I was adding music to my ipad at the time. Completed the update and finished transfering my music. When i opened the music app most of my album art was gon. Even art that was there before the update was now gone. I tapped on the artist and each album showed no artwork. I then went to video and all those were white boxes as well. They showed a screen shot previously. Anyone know why or better yet how to get the artwork back for music as well as video? This happened on both the original ipad and the new ipad.
hardware
ipad 1
new ipad
2011 mac mini (lion)

Here is what worked for me:
  My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Similar Messages

  • Ever since I downloaded the latest itunes update songs have not been syncing correctly and now they aren't all no matter what I do the settings on my iphone 4s or itunes on my PC.

    I recently had trouble updating my itunes, when I did do it I kept getting an error message and because of that I had to uninstall everything than reinstall itunes.  But since then my iphone, ipad, and ipod are not really syncing correctly.  My PC says its going through the steps and applying everything but when I got to my phone nothing is updated at all.  Nothing is being applied and I did the run diagnostics as well and it said that everything was fine.  When I got what is on this phone it says the playlists are on my phone but when I go to the music app on my phone the playlists aren;t there at all.  I've gone through all my settings on my computer and iphone and they are all what they should for the songs to transfer correctly and it still isn't working. 

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • I transfered videos from iPod to iTunes on Windows 7 PC but album art won't show up, even when I choose to find album art

    I just installed iTunes 64 bit on my PC with Windows 7. I transfered my movies from my iPod Classic but no album art on any of them. I even try to find album art but nothing. I've downlaoded a couple of music albums onto same PC that I downloaded previously on iPad and they have art but not the videos I just transferred from iPod. I also can't play any of them on PC. I keep getting the no Quicktime message even though I downloaded QT. Any ideas?

    I'm having the same problem, except I dont have itunes match enabled.
    I synced my ipad and unchecked all my albums to remove them. Then I re-synced with the albums selected. They went back on WITH the artwork under 'artists' but then for some reason the next time I sync, some of the artwork under 'artists' is gone leaving only a music note for the cover.
    It also has nothing to do with the cloud backup as I have experienced this with both backing up to the cloud and to my mac.
    strange.......

  • How do i get my ipod nano second generation to be rcognised on the latest itunes update? i have tried differnt cables and usb slots.

    hey, i have an ipod nano second generation (i know its old but i want to use it) on the old itunes before the latest update i could sync and change things on my ipod, i downloaded the latest software on my windows computer and now can not get itunes to find my device, i have tried different usb cables, different usb slots and have tried re-starting my computer. no matter what i try i can not get it to come up on itunes.
    Has anyone else had this issue? can anyone give some advice? thanks

    Hello joejoehoppy,
    Look for it to pop up next to the iTunes Store icon. Also check out the article below to troubleshoot your iPod nano connecting to iTunes.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Latest Itunes update does a restore to your Ipod and wipes out everything

    The lates update did a restore to my ipod and wiped everything out pictures, songs, downloaded games, EVERYTHING and needless to say I am OURTAGED should have been a warning to tell you that this would happen!! All of my songs were not stored in my library because i did not want to overload my pc with music, and a lot of songs i got from friends. and the pictures were priceless NOW ALL OF IT IS GONE and theres nothing anyone can do to replace it I THINK THAT ITUNES SOULD HAVE DONE A BETTER JOB OF LETTING CUSTOMER KNOW ABOUT THIS! SO TAKE IT FROM SOMEONE WHO HAS BEEN BURNED BY ITUNES DO NOT DOWNLOAD THIS UPDATE!!
    SIGNED MAD AS THE DICKENS IN VA.

    You cannot transfer song files from iPod to computer using iTunes (except for songs purchased from the iTunes Store).  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do a Google search on something like "ipod transfer," you should get some links.
    Once the song files are on your new computer, you can add them to your iTunes library.  Then, with "everything" in your iTunes Music library, you can sync to the iPod without risk of losing any songs.
    NOTE:  For any songs purchased from the iTunes Store, you can also re-download them at no cost, using the iTunes Store Purchased screen.  Be sure to log in using the same Apple ID used for the previous purchases.

  • Latest iTunes update; iPhone sync takes a long, long time

    I have a 64GB iPhone 4S, up to date with latest software.  I have iTunes running on a Toshiba Satellite laptop running Windows Vista 64-bit SP2; running latest update of iTunes.
    I am currently doing my second iPhone sync to change out a bunch of music since the latest iTunes update.  I have tons of records, and I like to switch up the tunes quite a bit.  I love the 64GB iPhone; holds over 500 albums.
    Both, the first time and now this time, the sync is taking forever.  Seriously, as I type this the sync is now past two hours and looks to be about 60% done.
    Prior to this update (both iTunes and phone), the sync took maybe 20 minutes,  Nothing else has changed; same computer/operating system, no bugs or viruses.  The only thing I think it can be is this latest update to iTunes; which, by the way, dumped all my albums when the update was done.  I had to add all the folders again; that took a while and a lot of album covers were lost.  Big pain in the butt, basically.
    I don't know if you Apple people are listening, but this is eroding my confidence in your brand.  Will I spring for a MacBook like I was planning?  Hmmm...

    No solution - just the same problem.
    My wife's 4s (iOS 7.0.2) has been hanging at syncing Contacts on iTunes 11.1 (iMac; Mountain Lion) the past several days. It never gets past "Syncing Contacts".
    Doesn't anyone have any advice. I've hard re-booted her iPhone; re-booted the iMac.
    We don't have this problem with either my iPhone 5 (7.0.2), her 2nd-gen iPad or her old iPot Touch.
    We share the same contacts and calendars across all of these devices and the iMac.

  • HT1926 Installation of latest  itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

    Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll"  Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

    Hey jeight26,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • I did the iTunes update and now I am getting a Windows error 126 message.

    I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99606)

  • I installed the latest itunes update, 11.4.0.18. Now itunes crashes every time I try to open it.

    I installed the latest itunes update, 11.4.0.18. Now itunes crashes every time I try to open it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message.  R6034 An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.

    Just did the iTunes update that iTunes said was available, now iTunes won't open.  I just keep getting a Runtime Error message. 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    Is anyone else having this problem?
    I tried to re-install and got the following message:  iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114)
    Does this mean I have now lost everything?

    I just had the same error: 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says.  I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
    Good luck!

  • I just downloaded the latest itunes update 11.1 and now I get an error messages saying "The item 'iTunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."

    I just downloaded the latest itunes update 11.1 for windows 7 and now when I try to open itunes with the shortcut on my desktop I get this error message: "The item 'itunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."  I can't open itunes at all.  Is there anything I can do or is there a problem with the new update?

    Start > Programs = Firefox
    Does that shortcut work?
    If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

  • While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

    While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

    The installer should have gone into your Apple Software Update folder:
    C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
    Right mouse click the msi file and select INSTALL

  • HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on.  All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYone please expl

    Good Morning,
    I just did a software update on my phone (finally) last night and now my phone will not come on.  It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYONE help me please???

    The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

  • I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?

    I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?

    Download iTunes using the tab at the top of this page, re-install.  Back up your computer first.

  • HT1420 Just tried to download and install latest Itunes update and it would not load correctly. Keep getting a warning that file MSVCR80.dll is missing. I have reinstalled Itunes but did not correct. I have a PC with Windows XP. Itunes ran great prior to

    Just tried to download and install latest ITunes update and it would not finish update. I aborted the update and then my ITunes will not open. I keep getting and error stating that file MSVCR80.dll not found. I reinstalled my original ITune file but this did not clear this error. Any ideas.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99732)

Maybe you are looking for

  • Sap notes for 103 movement type and 105 movement types in sap

    Hi all, Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible points will be awarded. thanking u in advance, srinivas.

  • Podcast graphic not showing Iweb rss not the same as Technotes

    I noticed that the graphic for my podcasts are not showing in itunes. Pinged and changed them to 300*300 jpg.and changed name of file and you can get to the file from the url. Week later still no change but text updates ok. Just have the generic file

  • Analogue output digital output

    Hello, I managed to create my VI in the proper way I think. I am trying to send a ttl every time my analogue output crosses zero. All whats left now is to transform the analogue data into a digital data and input it into the dammx write for the DO li

  • How to run a numeric case structure

    How can i control the numeric case structure using prompt user as my numeric input? Message Edited by unknown\ on 07-12-2005 10:25 AM Attachments: Case Structure.vi ‏478 KB

  • Ever since I upgraded to OS X Mountain Lion, Mission Control quits unexpectedly?

    I upgraded to Mountain Lion not too long ago and ever since I did, Mission Control just quits. I can't use the three finger swipe upward method, clicking the icon on my dock, or the button on my keyboard. I'm incredibly frustrated and nothing remedie