Did mavericks os update deletes old data? and boot camp 7win OS?
have sepereted my data in bootcamp os7 and mac os. if i updates mavericks, will i lost my partation and hole data?
No. An update only happens on the volume you select that has your OS X installation. Same with an upgrade.
Now, if you erase the drive or repartition the drive prior to updating/upgrading, then you could lose everything.
Always make a backup first, then you don't have to worry about losing anything. This is the best advice you will ever receive.
Similar Messages
-
My 2 TB Time Capsule’s memory is full because it will notautomatically delete old files as it is supposed to, so it is giving me zerobackup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and savesthe new?
Neither my local computer consultant nor I have been ableto change any of the settings in Time Machine to correct this problem. Working with the choices in the TimeMachine, there does not appear that there is any way to change the frequency ofthe backups either, so, after a year has elapsed, the time capsule is full, andmy only choice appears to be to erase all the current data on the Time Capsuleand start over, something that I do not want to at all let alone repeat on anannual basis. My questions are:
What can be done to have my Time Capsule delete old filesas it is supposed to do, so it has memory available to allow my computers toback up?
Is this a software problem that can be fixed online or isdoes this require a mechanical fix of defective hardware?How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details. -
i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???
capriz wrote:
i have just updated my old 3GS ...
To what... iOS 7 is Not supported on the 3 GS -
Hi. My mavericks is crashed and when i on my mac always showstha disk utility window. I do everything like repair and all but not fix this problem. I have no back up of my files. Is there any way to reinstall mavericks without erase my old data ?
To back up your data, either use Target Disk Mode and a cable from another Mac (which mounts your problem Mac as an external disk of the other Mac) and Disk Utility on that other Mac, or — and this is all assuming you either have a slow Internet connection and don't want to use Internet Recovery, or if you have an older Mac that doesn't support Internet Recovery — you can create a bootable USB key disk on another Mac and then boot your problematic Mac from that keydisk, then use Disk Utility from the installer to make a backup to another (external) (scratch) disk. You can also use that keydisk to reinstall OS X, to repair or to reinstall OS X.
-
The iTunes update is causing a problem on PC's resulting in an error pointing to MSVRC80.DLL. I called Apple Support they blame Microsoft.....(What a surprise!).
I did a second update on another pc and it produced the same problem with the same DLL file. Apple still says it's not their problem. Unfortunately until they acknowledge the problem and correct it iTunes is no longer functional. That's too bad but Windows Media Player works fine.
Apple, own up to the problems you create. Don't pull an Obama!
When enough people have the problem it will force Apple to correct it. Everyone on a PC using iTunes who try the update will have this problem.Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
How can I delete old data in citadel
How can I delete old data from Citadel so that HDD is not full when data is continously being logged in the database ?
Hi there,
I could see different possible ways to limit the database size on a LabVIEW DSC system.
a) You could limit the lifespan of your logged data to a certain time by adjusting the option 'Days to keep historical data' in the Tag Configuration Editor>Configure>Historical... tab.
b) You could use the Citadel Database VIs. Archive Database.vi would allow you to archive a database or a part (certain traces/tags, or certain time interval) to another location. With the archive option 'destructive', it would delete the source of the data from the original database.
Delete Traces.vi would delete a traces from a database.
c) The same/similar functionality you can have throught the Measurement and Automation Explorer and its Historical Data Viewer plug-in
b) and c) are NEW features of LabVIEW DSC 6.1!
Hope this helps
Roland
PS: There is a nice link about archiving Citadel on ni.com :
http://zone.ni.com/devzone/conceptd.nsf/webmain/2F24997EAD7C53A686256B6E00686D64?opendocument&node=DZ52101_US -
Deleting old data won't reduce Windows Azure SQL Database usage
My Windows Azure SQL Database usage keeps increasing. Deleting old data didn't help much. I was wondering how to figure out the distribution of the usage. All tables in my DB should not occupy more than 5GB and now it is most 12GB. Please help!
http://yanflex.comHello,
The database fee is amortized over the month and charged daily. The daily fee depends on the peak size that each database reached that day and the maximum number of databases you use. So, if the peak size of database is 12 GB and then you delete data
to reduce the size, it still charge based on 12GB this day.
You can use the following statement to get the database size:
SELECT SUM(reserved_page_count)*8.0/1024 as DBsizeinMB
FROM sys.dm_db_partition_stats;
Reference:Accounts and Billing in Windows Azure SQL Database
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube
Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
SoniyaYou are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4) -
HP G 42 UNABLE TO RECOVER OLD DATA AND FOLDERS AFTER I RAN RECOVERY TO FACTORY SETTINGS
HP G 42 UNABLE TO RECOVER OLD DATA AND FOLDERS AFTER I RAN RECOVERY TO FACTORY SETTINGS
Factory restore erases everyting on the drive, if you did not back up first, they are gone forever.
-
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..
[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful! -
I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?
Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!! -
Where do I go to delete old messages and not SAVE any?
Where do I go to delete old messages and not save any?
Hello there Ibent50,
If I understand correctly it sounds like you are wanting to delete some messages or whole conversations on your iPhone. This page from the iPhone User Guide should help you do that:
Manage conversations - iPhone
Delete a message. Touch and hold a message or attachment, tap More, select additional items if desired, then tap .
Delete a conversation. In the Messages list, swipe the conversation to the left, then tap Delete.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
The recent software update deleted my notes and they are not in iCloud. I can email some of the material to myself. Is there a way to make an email into a note?
contact the delevoprs of the app and ask them what they recommend.
Don't sync your phone in the mean time.
best of luck
Maybe you are looking for
-
How to burn to DVD without iDVD??
So I just made my first movie on iMovie11. it is 72 minutes long and I want to burn it to a DVD to be able to play in my DVD player. I have a new iMac with iLife already installed so I do not have iDVD and not sure I want to purchase iLife disc set
-
I'm trying to calculate year to date sales value. If I have more than one packet size my values do not match expected results. Is there a way I can have all data in single packet in start routine or end routine. I don't want to make cahnge to setting
-
Alarm not triggered: Insufficient vSphere HA failover resources
Does this alarm only get triggered when an HA action fails? I have a cluster of two ESXi 5.0 hosts, and since I am using way more than 50% of the available memory on each host, to me it looks like I cannot tolerate a single host failure. HA and DRS
-
I cannot open MPEG 2 from my Sony Camera
I do have a Sony HDR-SR11 Hard Disk Camera. I recently bought my first IMac and try to use IMovie to edit my videos. The AVCHD files were downloaded very smoothly, although some of them were duplicated. The SD (Mpeg 2) files are not recognized, neith
-
Hi, my Report developed with the Report Designer shows at the bottom a Navigation Panel to navigate through the different pages. But the first view shows "1 of 1" and not "1 of 8". If i scroll from page to page it changes from "2 of 2", "3 of 3+" and