Did Mid-2011 iMac come with install disks?

I bought a new iMac today, and I want to sell the old one. Should I have install disks? I don't remember getting any.
How can I wipe the hard drive and install an OS without them?

Click here and try using the Internet Recovery system. If it's not available on that Mac, you need disks; if it is, it can be used to erase the internal drive and install a fresh OS.
(125296)

Similar Messages

  • What system did my 'Mid 2011' iMac come with?

    I have upgraded to Mountain Lion but I'm wondering if the system actually came with Lion or Snow Leopard?

    mulgravebrad wrote:
    A friend has asked if he buys the machine can he reinstall Snow Leopard on it?
    Good question. The Mid 2011 iMac can run Mac OS X Snow Leopard without any problem, but there's a problem: you need a special Snow Leopard version that it's only available on the Mac OS X DVD that Mid 2011 iMacs have got.
    If your friend tries to call Apple to try to get DVDs for a Mid 2011 iMac, Apple will ask him/her for the serial number of the iMac. As your iMac came with Lion, Apple won't send him/her the DVDs he/she needs to install Mac OS X.
    In conclusion, it's possible to install Snow Leopard, but things like a possible firmware restriction and the lack of the Snow Leopard version that your iMac needs may trun this into a very difficult task

  • Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    I just bought the 17" MacBookPro the other day with Lion preinstalled and wanted to install Lion on my iMac. It makes sense that I should be able to upgrade for free you spend all this money on Apple products, give us apple supporters a break. Maybe this is something that Apple overlooked and in the future there will be a fix.
    I read up on forums and I finally called AppleCare they said that I should be able to install Lion on 5 other computers but only if purchased in the store, this doesn't make any sense. I feel like I already purchased a copy and that copy should be able to be installed on another computer. It should be as simple as logging in app store with the same apple ID and it be there to install on my iMac. If apple is trying to make everything user friendly, device syncying and convenient well it's not; this is just something they think of. I refuse to pay $30 for another copy. Fix this issue APPPLE!!!
    Because if those who bought computers in July that didn't have Lion preinstalled can obtain a free copy to install in 5 computers. I should be able to do the same with the Lion that I bought preinstalled it's just make sense to me.

  • HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it  I costantly get system thread not handled and kernel security check failure and the Mac restarts

    I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

    I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

  • How can i whip my matchbook pro that did not come with install disks

    I would like to know how to whip my macbook pro, it did not come with a install cd

    Restart with the Command and R keys held down and use the Disk Utility on the recovery partition.
    (94817)

  • Did Satellite Pro M70 come with WINXP disks?

    when i got my M70 it only came with one disk! the adons, did it come with the Windows XP Pro Disk? becuase i have Windows Vista Beta 2 and i dont want to install it unless i no i have the disk for Windows XP! becuse i use my laptop at school and if vista dont run word then i will have to go back to XP!
    thanks for your help
    James

    Hi
    The unit was delivered only with the Toshiba recovery CD because the Toshiba Assists (on the desktop) contains an option to create the own Toshiba driver and tools CD.
    Therefore only one disc was delivered.
    By the way. You can create second partition and there you can install a second OS without deleting the available WinXP

  • How to wipe Macbook pro HD for selling (late 2012) (did not come with instal Disk)

    I own a late 2012 macbook pro and looking to sell it
    It is a 750 GB HD i7 8 GB ram 13.3 inch. 10.9.1 Maverick OSX
    When i started it up (Don't know what version at the time) it was already preinstalled and didn't have a Software disc. So i'm searching through old post and they all say i must have a disc to reinstall the software disc (I never had one) after Wiping the HD.
    Question is... Can i just wipe the HD and throw it in the box along with everything else it came with and put it on ebay? I don't care for saving files as there is barely anything on it.
    Do i have to worry about logging out of google, aol, icloud, youtube etc?

    Brayden-aka-bman wrote:
    Do i have to worry about logging out of google, aol, icloud, youtube etc?
    Apple What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US

  • Does 2013 iMac come with installation disk

    I bought second hand iMac from Ebay but got no installation disk.
    Should it have one?
    Came complete in original packaging.

    If you require an fresh install of Mac OS X....Start up your mac while holding down CMD + R.
    This will download the OS from Apple for free.
    P.S it will only download the OS X version that came with your iMac. You can then upgrade it to Yosemite for free.

  • Did my macbook (May 2009) come with install discs?  I can't seem to find them. Thank you

    Did the Macbooks, May 2009, come with install disks?  I can't seem to find mine and I am going to have someone put in a larger hard drive.  Any ideas on where I could get the install disk/s for OS 10.5?  Thank you.

    Or you can clone your hard drive if you want. To clone your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then partition and format the new drive and clone your old drive to the new one. Then replace your old hard drive with the new one.
    Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

  • Why didn't my new imac come with an install disk for 10.7??

    why didn't my new imac come with an install disk for 10.7??

    New Macs shipping with Lion, no longer have Install Discs...
    See Here
    http://support.apple.com/kb/HT4718

  • My Mid-2011 iMac with pre-installed Lion can't load AHT (Apple Hardware Test) over internet

    I have a Mid-2011 iMac (3.4GHz) of which Apple's Support document for the Apple Hardware Test (http://support.apple.com/kb/ht1509) says:
    Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.
    Well, this doesn't work for me. My Mac is on a DHCP-supporting router which has constant internet connection. Yet, when I turn off the Mac and then on again, holding the D key down even before the screen turns on, the Mac does indeed react to this key as it's then turning the screen on and taking another about half minute before it continues with the boot process along with showing the Mac symbol. Without the D, the Mac symbol comes up quickly.
    So, it appears that the iMac is indeed trying to get AHT over the internet. Just that it doesn't succeed in it, and probably timing out after a while.
    Any suggestions how to fix this?

    Re
    extract from kb article
    PPPoE (where there is no router handling the PPPoE connection)
    No
    No
    Captive-Networks (where you click an "Agree" button to access the Internet)
    Yes
    No
    Proxies (where specific proxy servers must be configured in network preferences)
    No
    No
    Certificate-based authentication / 802.1x
    No
    No
    try check if you are in that case for your internet acces ?
    could be a firewall problem too , if is possible try desable firewall ( or any internet filter )
    no you can not see a wifi selection if you are wired ( using cable )
    by the way D key for AHT need to be pressed AFTER start up sound , and hold at min one minute
    HTH
    Pierre

  • My new TC did not come with a disk to install the AP utility.

    My new TC did not come with a disk to install the AP utility. It is flashing amber and I have no way to figure out why.  I have downloaded recent and prior AP utilities but they don't load to my computer.  Please advise.

    What operating system is your computer using?
    If you have a Mac, click the Apple icon in the upper left corner of the screen, then click on About This Mac. Post back with the OS X Version number that you see there.

  • How do I restore my 27" mid-2011 iMac EXACTLY the way it was after hard disk replacement?

    Hi all.
    Recently received an email from Apple saying that the 1TB Seagate hard drive in my 27" mid-2011 iMac is apt to fail anytime. Apparently they used some bad hard drives in the mid-2011 27" iMacs which are problematic so they're offering me a free replacement to a brand new hard drive. I'll be sending in my iMac for the replacement sometime in the next few days.
    In preparation for it, I've backed up my entire system using Time Machine into an external harddrive. The backup is up to date & includes all system files. I've also made a Lion install disk on an 8GB USB flash/pen drive using Carbon Copy Cloner.
    My question is: When I get my iMac back after the hard disk replacement, will I be able to restore my iMac to EXACTLY the way it was before the replacement using the Time Machine backup & the Lion install disk that I've prepared? When I mean EXACTLY, I do mean EXACTLY, e.g I don't have to re-install all the programs I have, my settings for the programs I have will stay intact, everything is where it should be etc...i.e EXACTLY the way my iMac is right now. 
    If yes, how do I do it? I've read Pondini's guide: http://pondini.org/TM/14.html
    However it is less than clear on certain points, e.g in my case, which one do I have to use to restore my system to the way it was...the Time Machine backups I have on the external HDD or the Lion install disk that I made using Carbon Copy Cloner? And how do I go about doing the restore?
    I'd appreciate any & all help given. Thanks in advance!

    daniirwan wrote:
    baltwo: Thanks for your input! I didn't think of wiping the old HDD before sending it in for the replacement..all those sensitive user data! One question: What's a FWHD?
    Already answered. Just note that FW is much faster than USB. See http://help.bombich.com/kb/troubleshooting/how-long-should-the-clone-or-backup-t ake for details.
    I already have CCC installed so I'll probably try it out. Are the steps outline here the one that I should do to restore the CCC clone when I get my Mac with the new HDD back? See: http://help.bombich.com/kb/overview/restoring-data-from-your-backup#full_volume_ restore
    Yes.
    Another question: while I'm booted on the backup/clone, and just after I've wiped the old HDD, how do I reinstall the OS to create a generic user account? Will I have to use a Lion install USB disk?
    No. IIRC (if I remember correctly), you can either use a saved Lion installer (hopefully it exists on your backup/clone) or use the Recovery HD. If you have the USB stick w/Lion installer on it, use that.

  • Re-Installing Snow Leopard on a mid 2011 iMac

    I have accidentally wiped the hard drive of a mid 2011 imac 27" there was no install DVD provided for this machine and a retail Snow Leopard disk will not boot, apparently I need 10.6.8 and the retail disk is only 10.6.3 is there any solution to this dilemma?

    The machines (we have more then one) all came with SL but no install disks. When I boot with cmd-R it comes up with a globe icon and message - apple.com/support - 6002F. I am now convinced that these machines were so close to the Lion release and were probably intended for Lion but were shipped with SL. I have now tried everthing including Lion install from USB recovery stick created an another SL to Lion machine and this works to the point where after downloading all 3GB of Lion it just goes back to the beginning again! I tried 3 times - good thing we have fast broadband and it failed every time! I then tried restoring a SL and even a Lion clone from another similar Mac but kernel panic every time, tomorrow I will try the retail "Lion on USB" option but it looks like its off for repair as far as this MAC is concerned.

  • Did my iMac  come with imovie? if so where is it?

    Ive just noticed Imovie, iphoto and garageband are not on this computer. This model did not come with an applications disc, was it suppossed to? I know it didnt come with a install software disc so i just asumed no application disc either.
    Ive looked everywhere online, some say it did come with a disc others say it didnt. Some say you can download them from the app store free of charge but i cant do that either. Did these apps not come with my imac?
    I read to restart the computer and open the mac os x utilities and click reinstall and jsut customize, but it wont let me click customize and i dont want to reinstalll the whole thing, because I dont know if itll do anything to my files.
    I got my imac from Best Buy this past summer. Have had no problems with it but needed to edit a video and realized these were gone. I also have a 2010 version that has these apps so i never realized it before. My new Imac is a 21.1 inch (mid-2011) mac os x 10.7.5.
    Any help at all would be appreciated. Are they available with this mac and how do i get them if so?

    If you erase install OS X Lion or OS X Mountain Lion on a new Mac that shipped with OS X Lion or OS X Mountain Lion installed, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
    After installation, start (up) from OS X.
    Double-click the App Store icon in the dock.
    Enter your Apple ID and password.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.

Maybe you are looking for

  • Error while executing Query with Variable.

    Hi All, I have written a query to fetch values from some user tables and sap tables. The query is as below. select a.docentry,a.u_scname,e.block,e.[City], e.[Country], e.[State1], e.[StreetNo], e.[ZipCode], e.[Building], e.[Cellular],a.[U_WONo], a.[U

  • Document attachment is not displaying , asking user ID password

    Hi, new year wishes to experts currently we are working on SAP CRM 4.0 version with webclient, as per my business requirement , i need to use documents as attachments to service ticket and even in knowledge base, so we configured content server , but

  • Mov files dont play smoothly even after rendering work area

    HI, I have adobe premiere elements 8 and i have some mov files that were recorded on a canon camera and are around 4 gb per 12 minutes of footage.  Ive exported them into premiere to edit and to export out.  I have rendered the work area of an 1 hour

  • Saving a project in Bridge

    How do I save a project in Bridge? I have several projects going at any given time and can not figure out how to save each one so when I open bridge I can select one of those projects to add additional files or edit? Currently it opens to the last pr

  • Line Chart with Multiple Series

    Post Author: JayZee CA Forum: Charts and Graphs HI I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do! My data is provided summarized on the server and i