Did not deactivate CS6 and re install windows 7

Hi, I recently reinstall my windows 7
but before I did this I did not deactivate CS6
Now my CS6 on the new install win7 said the serial key been used on 2 computer already
is there any way to solve this problem?

Yes. Open a chat with Adobe. They can assist you with this.

Similar Messages

  • I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

    I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

    If it's the same machine (same CPU) there should not be any need to activate.  The actiovation is tied to your CPU.
    If you run into problems, then:
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

    in which boot camp support software I can install the drivers for win 7 32 bit.
    my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
    also my macbook pro model is MC723.

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  rein

    when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  reinstall   deleting files signing on with another account etc  nothing works   I have read this is an apple programing problem  if so is there a fix  I need iclouds  thanks

    This other discussion may help: Re: how do I install icloud

  • I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature.  It now only allows me three options and the style I have been using for the last year is not

    I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature.  It now only allows me three options and the style I have been using for the last year is not there.  How do I add additional options and get my preferred signature style back?

    Hi Amanda ,
    Which version of Acrobat are you using?
    Which signature style are you talking about?
    You can go ahead and try uninstalling and reinstalling it and see if that works for you .
    Use the cleaner tool to uninstall it .Here is the link.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
    You can refer to the following link to re install it .
    https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards
    Sukrit Dhingra

  • After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.

    My bridge pause all the time. I have to wait 30 seconds after selecting a picture or click the right button of the mouse. I have installed a new windows 8.1, and a fresh CD6. But still these problems in Bridge. No problems in Photoshop. What to do

    What is the problem:
    When I choose a picture in Bridge I have to wait 20 till 30 seconds (sometimes more).
    When I choose with right click of the mouse. I have to wait the same time.
    When I choose the menu. Also
    After opening the picture(s) in Camera RAW. There are no problems
    In Photoshop there are also no problems. Everything works all right.
    Only Bridge have these problems. But I can’t work with it.
    My Computer
    HP Z820 with double     CPU Type           Mobile Intel Celeron M, 2000 MHz
    Nvidia Geforce GTX 980 card
    System memory 64 Gb
    Windows 8.1 Home Edition
    All software is up to date, incl BIOS
    DirectX 4.09.00.0904 (DirectX 9.0c)
    Lots of space on my disc drives
    Software: Adobe Master Collection. But only installed Photoshop and Adobe Acrobat
    Installation done with my original DVD of Adobe. All software updated
    But still problems
    Software installed again (including Windows).
    Now installed adobe from a download version from adobe.
    Still the same problems
    I have no illegal software!
    Multimedia      
    Geluidskaart     SB Recon3D PCIe Audio Controller
    Opslag 
    IDE apparaat     Standaard Dual Channel PCI IDE Controller
    SCSI/RAID apparaat       Controlefunctie voor opslagruimten van Microsoft
    SCSI/RAID apparaat       Intel(R) C600 Series Chipset SAS RAID (SATA mode)
    SCSI/RAID apparaat       Intel(R) C600 Series Chipset SATA RAID-controller
    SCSI/RAID apparaat       LSI Adapter, SAS2 2308 Mustang
    Harde schijf       ATA Samsung SSD 850 SCSI Disk Device
    Harde schijf       ATA SAMSUNG SSD 830 SCSI Disk Device
    Harde schijf       SEAGATE ST3450856SS SCSI Disk Device
    Harde schijf       SEAGATE ST3450856SS SCSI Disk Device
    Optische Station             HL-DT-ST BD-RE  BH16NS40
    Optische Station             hp DVD-RAM GHA3N
    SMART Status harde schijf         Onbekend
    Partities             
    C: (NTFS)            243668 MB (150173 MB vrij)
    D: (NTFS)            122101 MB (65332 MB vrij)
    E: (NTFS)            429244 MB (322019 MB vrij)
    F: (NTFS)            429244 MB (243491 MB vrij)
    Geheugencapaciteit       1195.6 GB (762.7 GB vrij)
    Invoerapparaten           
    Toetsenbord     Logitech HID-Compliant Keyboard
    Toetsenbord     Standaard-PS/2-toetsenbord
    Muis     HID-compliant Mouse
    Muis     Microsoft PS/2-muis
    Netwerk            
    Netwerkkaart    Intel(R) 82574L Gigabit-netwerkverbinding  (192.168.178.37)
    Netwerkkaart    Intel(R) 82579LM Gigabit Network Connection
    Peripherieapparaten    
    Printer  Adobe PDF
    Printer  EPSON XP-950 Series
    Printer  HP 4730 PCL 6
    Printer  Microsoft XPS Document Writer
    USB1 apparaat Texas Instruments USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
    USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
    USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
    Van: station_two 
    Verzonden: maandag 13 april 2015 21:58
    Aan: johan van der klaauw
    Onderwerp:  After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
    After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
    created by station_two <https://forums.adobe.com/people/station_two>  in Bridge General Discussion - View the full discussion <https://forums.adobe.com/message/7434796#7434796>

  • I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
    Then File menu > Browse in Bridge will bring up Bridge CS6.
    If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
    I hope that's the answer you were looking for.
    Gene

  • I installed Mac OS 10.9.4, but did not get iLife and iWorks. How can I obtain these

    I installed Mac OS 10.9.4, but did not get iLife and iWorks. How can I obtain these? Somebody talked about redemption codes, but I did not find any extra information. Any suggestions?
    Thanks in advance and best regards

    If your computer shipped with Mac OS X 10.6.8 or earlier, install them from the computer's original disks.
    If your computer shipped with Mac OS X 10.7 or newer, log into the Mac App Store with the Apple ID used to register the computer, click on the Purchases tab, and download them.
    If neither of these is applicable, buy them from the Mac App Store.
    (109450)

  • IPCP L2TP did not assigned address and install route

    Hi all,
    My Company recently using L2TP over radio link, for testing purpose the LNS using cisco 1841 and the L2TP client using 3 different machine:
    1. Hongdian Router
    2. Teldat Router
    3. Win XP client L2TP with IPSEC Disable
    there is problem when using Hongdian and Teldat router, the LNS did not assigned address and install route,the IPCP State suddenly closed as you can see at Debug LNS IPCP Fail.txt. I can assure you both router config is working (because when using another L2TP server like sl2tps or mikrotik, it just work fine).
    But When using Win L2TP client, it work as you can see at Debug LNS IPCP Success.txt
    i enclosed the config LNS too
    help plz anyone?

    Hi all,
    My Company recently using L2TP over radio link, for testing purpose the LNS using cisco 1841 and the L2TP client using 3 different machine:
    1. Hongdian Router
    2. Teldat Router
    3. Win XP client L2TP with IPSEC Disable
    there is problem when using Hongdian and Teldat router, the LNS did not assigned address and install route,the IPCP State suddenly closed as you can see at Debug LNS IPCP Fail.txt. I can assure you both router config is working (because when using another L2TP server like sl2tps or mikrotik, it just work fine).
    But When using Win L2TP client, it work as you can see at Debug LNS IPCP Success.txt
    i enclosed the config LNS too
    help plz anyone?

  • I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    # Question
    I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
    I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
    You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
    Did you try my suggestion of installing portable ESR ?
    For forum cross referencing purposes
    * Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
    *(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
    * Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
    *I note this was first seen in Fx21 and is 100% Windows 7
    <br />

  • Setup did not find any hard disks installed in your computer

    OK, I spent about 30 minutes looking for a solution to this and haven't found anything. I'm too lazy to keep looking, and I need to get back to work...
    Setup info:
    -Mac Pro (Early 2008)
    -Dual 3.2Ghz processors
    -32GB RAM
    -RAID Card with four 1TB drives attached (RAID 5 with two volumes: one Mac OS X 10.5.3 and one Mac OS X Server 10.5.3)
    -320GB SATA drive that originally came with the unit in hard drive bay 1, now installed in the 2nd optical drive bay and connected to the 5th internal SATA port. It's partitioned with BootCamp: 32.88GB for Mac OS X 10.5.3 (installed and running, used to create the BootCamp partition) and 264.71GB available for Windows.
    Windows install disc:
    Took my Windows XP SP1 install disc and used nLite to slipstream SP2 and SP3 and burn a new install disc.
    When I boot into the Windows install disc, everything goes fine, until it actually gets to the part where I should be selecting my hard drive (Hit Enter to Install Windows) for installation. Instead , when I hit enter, I get the message that "+Setup did not find any hard disks installed in your computer. blah, blah, blah, hit F3 to restart.+"
    I'm assuming this is a SATA issue and that I need to get a SATA driver slipstreamed into my install disc so that the Windows installer will see the SATA drive.
    Any suggestions on how to proceed?

    Everything I've read says that that won't work because I have the RAID card.
    Sounds like I'm out of luck, if BootCamp can't be installed on a SATA drive not connected to one of the original 4 bays.
    Also, I'm concerned about taking the RAID drives out (I'd have to take all 4 out or it corrupts the RAID setup when I stick the one back in) then putting them back in and having everything return to an All Good status.
    Message was edited by: chadcole26

  • Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

    Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

    cwhargrave,
    have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
    If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

  • How do I add PE8 to a new computer if I did not deactivate the other before uninstalling?

    Hello:
      I have PE8 on my desktop.  Last summer I installed it on my wife's laptop.  Later, I uninstalled it from her computer but did not deactivate it first.  I now want to install it to my new laptop using the same serial number, but the software link will not allow it. How can I install my PE8 fom a CD, which I paid for, on my second computer?  Ed

    You need to contact Adobe:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • I need my redemption code. Followed all tips, but did not work. Had to reinstall Windows 8Redemption Code - forgot mine

    I need my redemption code. Followed all tips, but did not work. Had to reinstall Windows 8 due to Windows Explorer crash issue,and had to reinstall all softwares. I am a monthly regular CC customer, and dont recall my 24 digit  code.

    Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    You will need to use an external DVD drive to run the disc installer that came you your machine. You can also do it with another Mac using the Remote Install Max OS X app. Finely, if you have access to another computer, you could burn the install image on a USB thumb drive, boot from that, erase the drive and run the installer.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Maybe you are looking for