Did Not Find Alert Inbox and Alert Configuration Page

Dear All,
I if i click on Alert Configuration and Alert Inbox in Runtime Workbench, It is showing 404 NotFound.
Please help us
Regards
Kumar

Dear Jay,
Thanks for your Quick response.
In my Runtime workbench If I open AlertConfiguration and AlertInbox It is showing 404 NotFound .
For that Iam following Michal Blog Question Number 13 in IE
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I have Run the program : RSXMB_ACTIVATE_ICF_SERVICES
and iam checking SAP note: 750287 (XI 3.0 Runtime Workbench: Alert configuration does not start) and change values in your ExchangeProfile
iam chaning values in Exchange profile in Runtimeworkbench.
com.sap.aii.rwb.server.centralmonitoring.httpport
i dont know here Basis team given proper values in that, if they didnot give those values ,how can i find those values.
Regards
Kumar

Similar Messages

  • Alert Inbox and Alert Config does not open in RWB

    When I open RWB I am not able to open Alert Inbox and Alert Configuration links. Its says " Internet Explorer cannot display the webpage" . When I exequte the command ALRTINBOX from Abap stack, it opens the Alert Inbox page.
    Can someone tell me if there is any setting that I need to change in my Internet Explorer. I even tried using Mozilla, but same issue. My team members are able to open these links, hence it may be some setting on my machine.

    Hi Chiraj/ Navneet,
      Thanks for your reply, I have already tried these setting and my team members are able to login from their comps. Also i have tried using SUPER USER id which has all access, still the same issue. Hence I believe it is an issue with Internet Explorer setting.
    Thanks
    Vineet

  • Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

    Hello，everyone.
    I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
    I download .bit file to FPGA and succeed.
    When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
    and the process is about 68% it fails.
    The message below the IMapct is as belows:
    done.
    PROGRESS_END - End Operation.
    Elapsed time =      0 sec.
    // *** BATCH CMD : identifyMPM
    // *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
    '1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
    done.
    INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
    but the original bitstream file remains unchanged.
    UserID read from the bitstream file = 0xFFFFFFFF.
    INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
    INFO:iMPACT - Current time: 2014/3/13 8:48:14
    // *** BATCH CMD : Program -p 1
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 66000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C >  120.00C]
    1: Device Temperature: Current Reading:  230.52 C, Max. Reading:  230.52 C
    1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    '1': Programming device...
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
    INFO:iMPACT:579 - '1': Completed downloading bit file to device.
    INFO:iMPACT:188 - '1': Programming completed successfully.
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    INFO:iMPACT - '1': Checking done pin....done.
    '1': Programmed successfully.
    PROGRESS_END - End Operation.
    Elapsed time =     23 sec.
    Selected part: XCF128X
    // *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
    // *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
    INFO:iMPACT - Current time: 2014/3/13 8:49:32
    // *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 66000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C >  120.00C]
    1: Device Temperature: Current Reading:  230.52 C, Max. Reading:  230.52 C
    1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    '1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
    INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
    '1': Downloading core...
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
    INFO:iMPACT:2492 - '1': Completed downloading core to device.
    Current cable speed is set to 6.000 Mhz.
    Cable speed is default to 3Mhz or lower for BPI operations.
    Current cable speed is set to 3.000 Mhz.
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    Populating BPI common flash interface ...
    Common Flash Interface Information Query completed successfully.
    INFO:iMPACT - Common Flash Interface Information from Device:
    INFO:iMPACT - Verification string:  51 52 59
    INFO:iMPACT - Manufacturer ID:         49
    INFO:iMPACT - Vendor ID:              01
    INFO:iMPACT - Device Code:            18
    Setting Flash Control Pins ...
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    '1': Erasing device...
    '1': Start address = 0x00000000, End address = 0x008CE03B.
    done.
    '1': Erasure completed successfully.
    Setting Flash Control Pins ...
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    INFO:iMPACT - Using Word Programming.
    '1': Programming Flash.
    done.
    Setting Flash Control Pins ...
    '1': Flash Programming completed successfully.
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    '1': Reading device contents...
    done.
    '1': Verification completed.
    Setting Flash Control Pins ...
    Current cable speed is resumed to 6.000 Mhz.
    '1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
    `Elapsed time =    814 sec.
    and i find many people have met the same thing. But they are spartan  series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
    I have read the status Registers and find there is an over-temperature state 
    and in Impact i could not readback the registers. It is strange.
    I am anxious about this problem and have not solved it yet
    What reasons may it be?
    Hope for your answer, thank you

    Hi~I want to know if you solve the configuration problem for virtex-6?
    As I encounter the  same configuration problem, I want to consult  you with some question.
    Can I have your email?
    gszakacs wrote:
    I have measured the VCCINT and find it is 1.0V, not 2.997V;
    That is not at all surprising.  I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
    my Reference board is ML605
    That would have been nice to know at the beginning...
    It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide.  See table 1-27, table 1-33 and the note below it about switch S1.
    I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA.  Have you tried power-cycling to see if the FPGA boots from the flash?
    I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that).  That will not only show the bits of the configuration status register, but also describe what each bit means.  Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
     

  • I did not find any difference from my iPad 2 and iPad 3?

    I did not find any difference from my iPad 2 and my iPad 3, I am wondering did they sell me the same iPad

    Look at the model number on the back of the box and enter that number into a Google search. That will tell you wich model you have.
    The new iPad comes in a box that simply says iPad on it so you can probably rest assured that you did receive the new iPad, but do the Google search if it makes you feel better.
    Try here as well.
    http://www.everymac.com/ultimate-mac-lookup/
    I stole this from Texas Mac Man .... Sorry Tex!
    Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
    Apple iPad Wi-Fi (Original) 16, 32, 64 GB
    The wi-fi only iPad configurations are assigned model number A1219.
    MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
    Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
    The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
    MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
    Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
    The wi-fi only iPad 2 configurations are assigned model number A1395.
    MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
    The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
    MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
    The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
    MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
    The Wi-Fi Only iPad 3 configurations are assigned model number A1416
    MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
    Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
    The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model numberA1430
    MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
    Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
    The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model numberA1403
    MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.

  • Messages linked to perf degradation : 'ignoring message from a previous generation' and 'got heartbeat...but did not find reference'

    Hi,
    We are facing a problem which implies bad response time from the WL server.
    Our configuration is : Sun E4500, Solaris2.6, Oracle 7.3.4, WL oci driver,
    no perf pack, Javasoft 1.1.7B_05 vm on server side and IBM 1.1.7B on client
    side (W98 clients).
    When multiple users connect to the server (let's say from 15 simultaneous
    connections) and work on our application, after few mins, the server process
    logs and outputs tons of messages like :
    Mon Nov 15 16:12:26 GMT 1999:<E> <RJVM> Ignoring message from a previous
    generation: JVMMessage from 8803290290807054313C146.100.8.34
    to -6807808847876022584C146.100.100.84 with CMD_ONE_WAY, prtNum=5, ack=30,
    seqNum=3151
    and
    Got heartbeat for -6807808847876022584/-1838914476/0/9209 but did not find
    reference
    Got heartbeat for -6807808847876022584/-1838914476/0/8979 but did not find
    reference
    This is strangely related to a real degradation of the WL server response
    times and sometimes to 'PeerGoneExceptions' thrown to the client (while the
    server is still alive...).
    This happens either for connections on the LAN or on the WAN (frame relay
    network) so I don't think this is network related. As of now, weblogic
    support told us not to care about it but after analysing the messages, there
    seems to be a real problem here :
    What seems to happen is :
    - The server considers that the client is dead so it's closing the
    connection. Eventually, the DGC cleans up references that were held by this
    client.
    - The server recieves a query from the 'still alive client' and re-opens the
    connection with the SAME id.
    - If there is a heartbeat from a DGC cleaned up object, the DGC informs that
    it 'did not find reference'.
    - It ignores the messages from the previously closed connection and tries to
    re-establish everything.
    We desperately need some feed back on what is causing the server to close
    the connection while the client is still alive. I've seen somewhere in this
    list that there are some internal parameters in the WL server
    ('weblogic.system.idlePeriodUntilTimeout' and
    'weblogic.system.periodLength') which indicates the WL server when to
    consider a client as 'dead'. This is defaulted to 1 min for the first and to
    4 for the second which implies that there must be at least 4 minutes during
    which the client doesn't emmit 'heartbeats' for the server to know it is
    alive.
    few remarks :
    1/ the client is not swapping nor GCing too long so the client vm is
    available to emmit these heartbeats.
    2/ we couldn't reproduce it in our test environement except when making the
    client swap for minutes which is not the case in the production env.
    3/ this really seems related to multiple clients connected simultaneously to
    the server.
    Thanks a lot for your help.
    Vincent Vandenschrick
    Obbisoft.

    Michael,
    We are running WL Server 404. This is the version we were advised to use for
    production. We are not using the performance pack because when we turn it
    on, the server behaves correctly for the first 15 mins of use and then,
    stops accepting new connections and even closes the existing ones. This
    behaviour seems to happen only when the server is used by multiple
    concurrent users. So the only "stable" configuration we found to run the
    server is Javasoft 1.1.7B (Sunsoft's jdk 1.1.7 produces a core dump after a
    few minutes use) + perf pack disabled.
    We have support calls open for most of these issues but I thought I would
    ask the group to benefit from its experience.
    Thanks for your help.
    Vincent.
    Obbisoft.
    Michael Girdley a écrit dans le message
    <[email protected]>...
    Vincent,
    What version of the Server are you running? Why are you not using the
    performance pack?
    Thanks,
    Michael Girdley
    BEA Product Manager
    Vincent Vandenschrick <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    We are facing a problem which implies bad response time from the WLserver.
    Our configuration is : Sun E4500, Solaris2.6, Oracle 7.3.4, WL oci
    driver,
    no perf pack, Javasoft 1.1.7B_05 vm on server side and IBM 1.1.7B onclient
    side (W98 clients).
    When multiple users connect to the server (let's say from 15 simultaneous
    connections) and work on our application, after few mins, the serverprocess
    logs and outputs tons of messages like :
    Mon Nov 15 16:12:26 GMT 1999:<E> <RJVM> Ignoring message from a previous
    generation: JVMMessage from 8803290290807054313C146.100.8.34
    to -6807808847876022584C146.100.100.84 with CMD_ONE_WAY, prtNum=5,
    ack=30,
    seqNum=3151
    and
    Got heartbeat for -6807808847876022584/-1838914476/0/9209 but did notfind
    reference
    Got heartbeat for -6807808847876022584/-1838914476/0/8979 but did notfind
    reference
    This is strangely related to a real degradation of the WL server response
    times and sometimes to 'PeerGoneExceptions' thrown to the client (whilethe
    server is still alive...).
    This happens either for connections on the LAN or on the WAN (frame relay
    network) so I don't think this is network related. As of now, weblogic
    support told us not to care about it but after analysing the messages,there
    seems to be a real problem here :
    What seems to happen is :
    - The server considers that the client is dead so it's closing the
    connection. Eventually, the DGC cleans up references that were held bythis
    client.
    - The server recieves a query from the 'still alive client' and re-opensthe
    connection with the SAME id.
    - If there is a heartbeat from a DGC cleaned up object, the DGC informsthat
    it 'did not find reference'.
    - It ignores the messages from the previously closed connection and triesto
    re-establish everything.
    We desperately need some feed back on what is causing the server to close
    the connection while the client is still alive. I've seen somewhere inthis
    list that there are some internal parameters in the WL server
    ('weblogic.system.idlePeriodUntilTimeout' and
    'weblogic.system.periodLength') which indicates the WL server when to
    consider a client as 'dead'. This is defaulted to 1 min for the first andto
    4 for the second which implies that there must be at least 4 minutesduring
    which the client doesn't emmit 'heartbeats' for the server to know it is
    alive.
    few remarks :
    1/ the client is not swapping nor GCing too long so the client vm is
    available to emmit these heartbeats.
    2/ we couldn't reproduce it in our test environement except when makingthe
    client swap for minutes which is not the case in the production env.
    3/ this really seems related to multiple clients connected simultaneouslyto
    the server.
    Thanks a lot for your help.
    Vincent Vandenschrick
    Obbisoft.

  • Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated

    Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
    If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
    Gautam.75801

    Hi,
    We may need to create script based rule using PowerShell or VBScript.
    Please go through the below links for command get-mailboxstatistics:
    Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
    Regards, Yan Li

  • I deleted my iphoto app on my iphone5s(ios8.3) by mistake. And I did not find the app in the App Store. How can I recover it?

    I deleted my iphoto app on my iphone 5s (iOS8.3) by mistake. And I did not find the same app in the App Store. How can I recover it?

    This Apple doc can help you get familiar with the Photos app that the iPhone uses:
    Migrating from iPhoto for iOS to Photos on iOS 8 - Apple Support

  • TS3899 I have upgrade my to iOS7 and my company recently upgrade to Exchange 2010. My emails are not synching to my inbox. I can see all of my sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

    I have upgrade my phone to iOS7 and my company recently upgraded to Exchange 2010. My emails are not synching to my inbox. I can only see my Sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

    You need to have a different Apple ID for each of the other devices.

  • Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I

    Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I want the solution quickly

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • TS1702 I purchased PDF printer before upgrading my iPad software, but when I upgraded the software and searched in the purchased applications, I did not find it. How can I restore it?

    I purchased PDF printer before upgrading my iPad software, but when I upgraded the software and searched in the purchased applications, I did not find it. How can I restore it?

    Flamingo50 wrote:
      I have an iPad (1)  can you not upgrade the software to anything higher than 5.1.1? 
    Correct. The iPad 1 can only go as far as iOS 5.1.1

  • Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please

    Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please
    its very important files!

    tis true
    I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
    I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

  • I downloaded the Creative Cloud. I went to the section of the application and did not find the program Adobe Premiere. Tell me how and where I download a trial version of this program?

    I downloaded the Creative Cloud. I went to the section of the application and did not find the program Adobe Premiere. Tell me how and where I download a trial version of this program?

    Hi Dmirtiyter, I suspect that you have a windows computer and seems you have a 32 bit system and that's the only reason you are not getting a download option for Premiere Pro as its a 64 bit Program.

  • HT201441 Software worked ios 7 and the locking device and Apple's id request because I do not know E-mail password why do not I did not find a solution

    Software worked ios 7 and the locking device and Apple's request because I do not know E-mail password why do not I did not find a solution

    abdoalam wrote:
    why do not I did not find a solution
    What is the question?

  • Software worked ios 7 and the locking device and Apple's request because I do not know E-mail password why do not I did not find a solution

    Software worked ios 7 and the locking device and Apple's request because I do not know E-mail password why do not I did not find a solution

    abdoalam wrote:
    why do not I did not find a solution
    What is the question?

  • Transport alert category and alert rule

    Hi,
    We are using SAP BASIS 700 (NW2004S SP9). We have created alert category and alert rule in development system. We now want to transport this alert category and alert rule to test system. I have referred to sapnote 913858 but its valid till SAP BASIS 640 and we are using SAP BASIS 700.
    Does anybody know how to resolve this issue?
    Regards,
    Mateen.

    Thank you all you 3 wonderful people, your replies did helped and I am definitely going to reward you with the points..Now I am getting alerts in my alert inbox. Can you also help me with some info on alerts?
    1) What exactly happens when I check and uncheck "Suppress Multiple Alerts of this rule" checkbox while creating alert rule? I have read some documentations for it in sap help website and also in some of the forums but its still very confusing to me. Can you please give me an exact picture of it?
    2) I am unable to get alert emails in my lotus notes. I compared my profile setup in XIJ and XIT using TCode SU01 and found that the PARAMETERS tab had some discrepancies. Can you please confirm if this can be the reason?
    Best Regards,
    Mateen.

Maybe you are looking for