Did not pass integrity check??? Help

I am using internet explorer 8, on a brand new Toshiba Laptop, on wireless broadband but yet when I try downloading Adobe Flash Player 10, it is taking approximatly 2 hours on the download window with the green bar to get to 100% and when it does get to 100% it is saying that it did not pass the integrity check and if I click resume it starts the download all over again.
I have tried using different browsers ie Mozilla Firefox and Opera and it is still the same...
I have a support case open with Adobe for this but so far anything they have told me I have been unsucessful with.
Please Help!!.........
kind regards

Hello, What OS are you using? Are you trying to install the latest Flash Player vs 10.0.42.34? Have you run the uninstaller
from here? http://kb2.adobe.com/cps/141/tn_14157.html You may want to read each section to be sure to comply with the various requirements before running it. Especially the last part if you are using IE. This is downloaded to your desktop. Close all browsers and check the system tray; nothing that uses Flash should be running.
After running the Uninstaller, it is a good idea to go to Tools>Internet Options and check both sections of the add ons to
check if the old Shockwave Flash Object version ActiveX Control has been removed. If it has not, run the Uninstaller again. Then be sure to Reboot again.
Before running the offline Installer, I would suggest you read the troubleshooting link. It may help to be familiar with the various issues that an install might fail before trying it again.
http://go.adobe.com/kb/ts_tn_19166_en-us This is the troubleshooting link
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe Installer link for IE-Download to the desktop.
After installing, go here to the Adobe test site: http://www.adobe.com/products/flash/about
If you have any questions before or after, please post.
Thank you

Similar Messages

Error while installing Adobe Reader "Did not pass integrity check"

When the download manager gets to about 80% this error pops up every time, I have tried clearing the temporary files, restarting my computer donwloading an older version but nothing works.
The entire message says:
"Adobe Reader":
"Adobe Reader":
The Download did not pass the integrity check (16291.304.428)
I have windows 7, 32 bit. Help please!

Don't use the download manager; download the installer directly from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/AdbeRdr1000_en_US.exe (English version 10.0 for Windows).
Use this link if you need another version http://get.adobe.com/reader/enterprise/

Did not pass integrity check (16236.304.443)

Hi,
I am trying to install flash player in Windows XP, IE 8.
As soon as download and installation starts, everything seems fine. The progress bar reaches 100% and stays there for some time. Then suddenly it starts increasing furthur (>100%) and the bar goes outside the visibility region of the window. Soon after, I get integrity check error. Any idea what I am doing wrong ? Refer these pics :
1. http://i1004.photobucket.com/albums/af162/rbharath25/flash.jpg
2. http://i1004.photobucket.com/albums/af162/rbharath25/flash2.jpg
3. http://i1004.photobucket.com/albums/af162/rbharath25/flash3.jpg
4. http://i1004.photobucket.com/albums/af162/rbharath25/flash4.jpg
Thanks,
Bharath

Hello everyone,
I apologize for the inconvenience this issue has been causing to you.
To those who are experiencing the install difficulty due to the integrity check error, could you please send a private message to BWolfe [ADOBE] with your email address? He'll forward your contact information to me, so I can start more information gathering.
In order to troubleshoot this issue, we would like to get a little more information.
Thank you so much!!
- Yuko (Platform QE / Adobe Web Team)

"AFP 10.3 download did not pass integrity check 162103.304.450"

We have attempted to download AFP enumerable times on a Dell Inspiron with Win Vista 32 bit.
We have followed so many suggested methods to download and trouble shoot that I cannot remember... 15, 20 or more....
And yes, security/antivirus were always disabled, and adobe uninstaller was used to uninstall any older version(s).
We also attempted to download an older version of AFP with no luck.
WTF mate... we used to use flashplayer on this unit but after adobe and other updates were installed recently, AFP does not work and we cannot download it...
BTW... no, restoring to an older SRP time does not work either.
Need help here badly...

I had the same problem. Heres my solution:
1. Visit the following web page.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14266
2. Download version 10.3.181.14
3. Extract and open the folder navigating to fp_10.3.181.14_archive\10_3r181_14
4. Run the installer flashplayer10_3r181_14_win.exe
5. After the installation is complete, navigate to http://get.adobe.com/flashplayer/ and try again
Hope this is of help

[TECHNOTE ANNOUNCE] Error installing Flash Player "The download did not pass the integrity check (16236.304.443)

All,
I've published a new technote for folks who are having trouble with the Adobe Download Manager and Flash Player.
Error installing Flash Player "The download did not pass the integrity check (16236.304.443)
http://kb2.adobe.com/cps/512/cpsid_51258.html
Essentially this technote links to the Windows troubleshooting technote here:
http://www.adobe.com/go/tn_19166
However, before today the Windows troubleshooting technote only had an EXE install for the ActiveX version of Flash Player 10. I have now added a link to download the EXE version of the Flash Player Plugin installer as well.
Please point other users with integrity check errors to the first technote.

Thank you for the update & Tech Note Announcement. I do have a couple of questions, if you could please respond.
After uninstalling and ready to download; reading from the link you provided on 9/4/09, Should we follow the normal download instructions
per #2. "Flash Player download Center" and if a successful installation is not accomplished, THEN, go to "download and unzip install_Flash_Player_10_Plugin (all other windows browsers) ? Or should the latter step be done in lieu of #2 mentioned. I am assuming the download from F.P. D.L. Center would be done first and then troubleshoot by running the EXE. version of the F.P. Plugin installer.
Experience has taught me not to assume much, and if you don't know, ask!
Thanks for your hard work, but you have to admit, for the technically deprived, it is frustrating and confusing.

Yaourt and packer always telling me "one or more packages did not pass

Ive been using Arch for a few years now. Yaourt nor Packer have ever really failed me to this extent. most EVERY package I try to install lately with yaourt or packer fails. I constantly get the below error. Even when I download the package, get the md5sum manually and place it into the proper spot in the pkgbuild I STILL get the error. Im extremely confused and need some help. Thanks in advance for any help you can give.
-> Downloading postfixadmin-2.3.5.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 29628 100 29628 0 0 39423 0 --:--:-- --:--:-- --:--:-- 39423
==> Validating source files with md5sums...
postfixadmin-2.3.5.tar.gz ... FAILED
==> ERROR: One or more files did not pass the validity check!
==> ERROR: Makepkg was unable to build postfixadmin.

stayupthetree wrote:If the md5sum of the package I download matches the md5sum of the one inside the pkgbuild should I still receive the error?
It shouldn't happen then.
Do you get the same error when you build a pacakge by hand with makepkg ?

Windows Cluster Management Library did not pass the security verification

so, nothing to add
Windows Cluster Management Library did not pass the security verification.
The management pack cannot be downloaded and the temporary file has been deleted.
Could not load management pack [ID=Microsoft.Windows.Cluster.Management.Library, Keytoken=31bf3856ad364e35, Version=7.1.10100.0].
Current versions:
SCOM 2012R2 update rollup 4
Windows Cluster Library 7.0.8433.0
Windows Cluster Management Library 6.0.7063.0
Windows Cluster Management Monitoring 6.0.7063.0
any solution to fix?
none

Igor,
take it from there:
http://www.microsoft.com/en-us/download/details.aspx?id=2268
I assume you tried to get (download/import) it directly through the console, right? That's not recommended since you most of the times don't get the guides (download) or can review the MP (import).
A better source for downloading (and to subscribe for mail notifications) would be:
http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Adobe Photoshop CS5 did not pass the security scan on my windows machine.

All products are up-to-date but the photoshop did not pass the test. Does Adobe still support the CS5 products?

No, Adobe no longer officially supports any of the CS5 products.
However, we are not aware of any reports of any anti-virus / anti-malware software rejecting any Adobe products.
Exactly which such software is doing that? You may have very outdated or crufty virus / malware definitions. Try to get updates for them.
- Dov

Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia Blog

Still a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog

How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!!

How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!! P.s I'm running newest version of iTunes.

Connect your iPad to your computer and let iTunes back up your iPad. After it does that disconnect it and go into your settings under general and under reset and select erase all content. After you do that reconnect to your computer, open iTunes and follow the screen options to set up your iPad as new. Once it is done doing that see if you have the latest version of iOS installed and if it does then either download gain the apps you had before or restore them from the backup made previous.

We sent you three weeks ago add-on ImageExchange 2.9.4 and it still did not pass "fully reviewed" is there a reason? The current version do not support FF 18

We sent you three weeks ago add-on ImageExchange 2.9.4 and it still did not pass "fully reviewed" is there a reason?
The current version do not support FF 18 so the issue is urgent
Thanks
Eyal Shaked - Picscout

I talked to the Addons people, and apparently your add-on was rejected several weeks ago. They said to read the email you received from them for those reasons. I'm locking this thread as this is a Firefox support forum, not an extension dev support site.

BPC - Submitted data did not pass validation

Hi experts,
I'm working with BPC 7 Microsoft.
I've just copied an ApplicationSet and the new one doesn't work properly in reference to sending data.
The issue is:
I send data correctly. The system shows the result as successfully, n data submited, 0 data rejected. But, suddenly, the template doesn't show data. It seems as if the data was disappearing.
If before sendind data, I click on "Validate submission before sending", the message is: "Submitted data did not pass validation; you may need to resubmit it"
Any ideas about it? Do you know what I'm doing wrong? Any possible solution will be welcomed.
Thanks and Regards

Hi,
It looks like your data is not passing the validation rules defined into Validation Account. Please verify the rules defined there. Please try to also to full process the Account dimension.
If the data did not pass validation, select Yes to run the validation report. This report is creating by administrator and should show you why the data is not passing the validation.
Best regards,
Mihaela

I have a charge on my itunes account that I did not authorize. Finding help for this type of problem from Apple or itunes is impossible. Who do I contact to get this charge taken off my account?

My checking account was debited by itunes for a subscription i did not order. How do I go about having it taken off? The entire Apple website and the itunes website is competely non-helpful for resolving problems. They should make their site equally as unfriendly when it comes to enticing you to buy their products.

You could simply type "Contact itunes support" into the google search bar. This would give you the link to contact itunes support.
Or you could just click the word Support at the top of this page, then click the link under Contact Apple Support.

Flash player download won't pass integrity check

I'm trying to update my flash player. I used the adobe 'remover', rebooted then tried to download version 10.0.45.2 but it won't pass the integrity check. I'm tried with firefox first (clicking the 'allow' notices) then tried with internet explorer. I disabled my firewall, avast anti-virus as well as my ad-aware before the attempt. Any suggestions? I currently have NO player at all

Hi, you could refer to this thread that I posted instructions for FF and IE regarding Flash Player.
http://forums.adobe.com/thread/581376?tstart=0
I would suggest that you read over the Uninstall instructions and with IE, pay particular attention to the last NOTE at the end of the article.
If you have any questions before you start, just post back.
Thanks,
eidnolb

Did not pass integrity check??? Help

Similar Messages

Maybe you are looking for