Did not update to ios8.2 still cannot use iTunes store

This situation appeared almost at the same time when I realised I couldn't use iTunes store in iPhone with IOS8.2.
However I didn't update my iPad to ios 8.2 and i can't use App store either.
What happened? Is IOS8.2 the real problem????

HI,
I have the same problem.
First, I tried to play a game but it didn't work.
So I signed out from Game Center and when I tried to sign in again, it said ''GKErrorDomain 3''.
Moreover, I can't install apps ...
I updated iOS but the issue isn't resolved ...
Bye.

Similar Messages

I was doing an update and recieved an error message that Itunes did not reinstall properly and now I cannot open iTunes on my computer

I was doing an update to my iTunes and it did not reinstall properly. Now I cannot open iTunes at all on my laptop. What are the fixes?

You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

Since the update, I cannot use Itunes store on my phone.

When I open the itunes store app, the screens have the header and footer but anything I do does not work. It has a blank screen. Any suggestions?

Hi dsbrew1,
First, try signing out of your account in Settings > iTunes & App Store. Once signed out, force close the iTunes Store application and restart your device. After you have restarted, go ahead and sign back in.
If the above did not resolve your issue, refer to the following:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
If you haven't been able to connect to the iTunes Store:
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connectionsoriOS: Troubleshooting Wi-Fi networks and connections.
Thanks,
Matt M.

I have an iphone 6 plus and have completed all the updates. However I still cannot use voice texting. I have Uconnect on my vehicle. I have read you do not have to turn on MAP it automatically turns on with bluetooth.

I have an iphone 6 plus and have completed all the updates. I have Uconnect on my vehicle and use have to have MAP in order for it to work. I have read you do not have to turn on MAP it automatically turns on with bluetooth. But it still does not work. Thank you in advance for any suggestions!!

Hi janis77,
Thanks for the question. After reviewing your post, it sounds like you are having trouble connecting to your car. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Cannot load iTunes Store

I am having problems loading the iTunes Store. I have updated to the latest version, still no luck. I was also having trouble syncing my phone so I uninstalled iTunes and all associated programs as suggested on the support page and reinstalled. Still cannot load iTunes Store. Any suggesstions???

Nevermind- followed this tip from another user and all is well now
For any others of you having the problem, follow this:
try this:
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
netsh winsock reset
After this restart - it worked for me perfectly

I cannot access iTunes store from iTunes. Help?

I have Windows Vista.
All software updates are current.
I cannot access iTunes store
The PING side bar does not even appear.
I have uninstalled/reinstalled iTunes 3 times.
I cannot update to iOS5 on iPad
I cannot update to iOS5 on iPhone
Please help...

You just make a purchase and it will deduct it.

I have updated to iOS8. Now cannot connect to BT speaker I have been using for months. BT discovers it but will not pair. Help please

I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.

I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
... And no I am not trying to connect both at once. To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair. The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect.

I've downloaded itunes 12.0.1.26 3 times after the update and it still doesnt work! Everytime i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use itunes!!!!!!

I've downloaded iTunes 12.0.1.26 3 times after the update and it still doesn't work! Every time i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use iTunes!!!!!!

Hey High Socks,
Thanks for the question. If I understand correctly, iTunes isn't working when you try to launch it. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

I did not update in time, now I have problems and I cannot seem to update ical.

I did not update in time, now I have problems and I cannot seem to update ical. Can someone help guide me?

Apple said to update ical. I guess I waited too long because my calendars and all my events disappeared. I tried syncing with my iPhone and it deleted my calendars off my iPhone. Double clicking on a calendar invite does not work either, it won't open or populate my ical. I requested an update through Mobileme to get ical working again and nothing..... It does not appear to want to update or start working again. Is this an issue with Apple ical in general?

Every time i try to open itunes to update apps for iphone 4s i can never get it to open, i went to command prompt and did the netsh winsock reset, still cannot open itunes

i cannot open itunes to update apps on my iphone. i did the command prompt-netsh winsock reset, still cannot open itunes.

Try following steps and test one at a time:
1. Check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / ADD N REMOVE PROGRAMS / hightlight QUICKTIME, click CHANGE or UNINSTALL then REPAIR.

IOS 8 update did not installing iPad Mini, space still used by installer, not recognized by Software Update, says I need to make more space again

I Cleared room on my iPad Mini for the iOS 8 install, downloaded the installer and started he install. Device restarted rather quickly after turning off for install, did not update. When I went back to Software Update to try again, it says I need to redownload the installer and I now am using the ~1GB of space taken up by the original install file and need to clear that much space. Any way to either get my iPad to recognize the install files or delete it so I can try again?

Hooked it up to iTunes to update. The first time I tried, an error popped up that said there was an error with the firmware, so I reset my iPad Mini and tried again. This time it updated fine, no errors. Thanks for the help. Also, the original update file is now deleted. Because I have that space back.

Open quantity in Sales Order did not update after cancelling Reserve Invoice

Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
Thanks in advance.

Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
SO Quantity: 100
Open Quantity: 40
Reserve Invoice 1: 60
Reserve Invoice 2: 40
SO closes before they can make Reserve Invoice 2

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

Folder Redirection did not update to the new server

hello guys, I had migrated quite some time ago to a new server.
I thought everything works fine, basically the server functionality DNS, Replication and other stuff works fine.
But I notice that some of the workstation did not actually update its folder redirection to the new server.
Their desktop and my documents still points to the old server.
So their offline files, is becoming larger and larger.
I have some workaround but it's a lot of work. Question is, why those Win 7 workstation folder redirection did not update to the new server.
What should be the best practice? During the migration process from the old server to the new server, all workstation should be turned on?
Or any tools to update those workstation to the new server without losing their files?
Basically, just editing the registry to point to the new server will help. But it means losing their current files and whatever old stuff that is on the server will be the one that will be shown on their desktop and documents.
any inputs is greatly appreciated.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Hi biswajeetpattnaik, before migration it was Windows 2003.
Then I introduce Windows 2008.
Then I introduce a new Windows 2012.
Now Windows 2012 is the main DC.
Actually, everything is under control right now. As what I said on my first post, I manage to do some work around.
The only question I have on mind, is how on earth this thing happen.
I was assuming, that the workstation will be able to point to the new server, without any glitch since everything is working fine.
And the GPO was applying on the workstation. If I type gpresult /v on the workstation is it being applied. Even if I run GP Modelling it is also shows on the result that the folder redirection is being applied.
But to my surprise the folder redirection still points to old server, if I have not discovered it then it would be difficult if some files will get lost.
Thanks for your reply.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Did NOT update to iOS4, 3G slow ANYWAY

I did NOT update to iOS4. I saw all the reports of it slowing the 3G down, so I didn't.
And in the time since, my iPhone has been crazy slow ANYWAY. Yes, still running 3.1.3, and it's still slow going into Settings, SMS, Camera. The Home button doesn't always respond to the first press. The battery is down to 20% by mid-day (one example: charged overnight, put it in pocket, saw a movie, made a 14 minute call after. 20% battery warning during that call).
I took it to the Genius bar, they did notice that the battery performance is really bad now. I told them I felt that it was related directly to iOS4, even though I didn't update. I've had and used my phone long enough to know that it was right around the time the update was released that this began.
My theory - not officially accepted by the Genius, but acknowledged as possible - is the apps. I've been keeping my apps up-to-date, and most of them have been updating for the Retina display and Multi-tasking. It feels to me (and my iStat app has backed this up somewhat) that the new apps, optimized for iOS4, are sucking more memory from the 3G regardless of the OS version. Maybe they're constructed to expect iOS4 and run harder, I don't know.
I've seen other 3G owners who didn't update having the same problems, some worse than me. Everything I've seen on the forums complains of slowness after updating to 4.0. Anyone had any problems remaining on 3.1.3?

RestlessFool wrote:
In summary I would suggest to anyone to take on updates as soon as practical and if anyone sees anything unexpected, unexplained or unusual then start with a reset followed by a restore then a 'restore as new' (which helps to avoid errors in backups, etc, being carried forward), and if problems persist then take their 3G to Apple or to an Apple-approved agent to get it fixed.
The problem with taking on this update is that, in general, it seems to render the 3G frustratingly slow at best and non-responsive at worst. While your advice has merit, a lot of people have just a cell these days, or their cell is an integral part of their livelihood, and the possible loss of communication, as well as a myriad of other services the phone provides, is more than one is willing to risk.
My phone is also slow and also still on 3.1.3. I am reluctant to "upgrade" to 4.0.x. Every single person with whom I've talked about their 3G has experienced a very difficult time with 4. Those with the 3GS have a more mixed response: worked great for some, not for others.
It stinks, because the risk in switching to a new OS seems too great. My phone is sluggish 90% of the time compared to just 3 months ago. It needs TLC, but the fear of losing my phone entirely outweighs the (seemingly minute) possibility of a positive outcome. I have all the issues people seem to be having (slow slide-to-answer, the middle bottom button guide not responding at all sometimes, receiving voice mails but not phone calls, frozen screens, etc), but I have NOT updated any of my apps since 4.0 came out, so I don't see that as the issue.
I feel as if the software for the iPhone 4 is just too much for the 3G to handle, and is making my phone obsolete. I run the gamut from frustration to anger, and while I've always perceived Apple as having good-to-great customer service, it has made me think twice about the Mac book I've been desiring...

Did not update to ios8.2 still cannot use iTunes store

Similar Messages

Maybe you are looking for