Did power management change with Maverick update?

Ever since the update of Mavericks, my laptop has had difficulty maintaining power supply to the USB for charging my iPhone. It is almost like having a loose connnection, where the phone does not seem to be connected much of the time, but then I also get pop up messages saying the phone is drawing too much power.

Answer, I doubt it. USB hubs frequently do not provide enough power to charge peripheral devices.
Charge it in a wall plug.
Barry

Similar Messages

Ken burns cropping in iMovie 9.09 changed with mavericks update. Cant zoom in to a small area....it limits the size now. How do i get back to the old way?

Ken burns cropping in iMovie 9.09 changed with mavericks update. Cant zoom in to a small area....it limits the size now. How do i get back to the old way

These timezone definition changes are fairly common, when viewed world-wide.
For notifying Apple, contact the folks at the Apple Support Center or (if you have access) log a bug report. (The folks at Apple might or might not notice any postings made here.)
For the immediate case, updating the timezones yourself is straightforward; the sequence is basically the same on Linux, OS X, Unix and even OpenVMS. Ugly, but it works. (The US folks got to see this mess first-hand a few years ago, but there are other locations that see these sorts of timezone definition changes far more often.)
For those following along that aren't familiar with this sequence, this old posting should get you close when rebuilding your definitions, though the timezone database has moved to IANA.

Handling Solution Manager changes with ChaRM (ChaRM on SolMan PRD)

Hi Experts,
Having deployed ChaRM to satellite system (three system landscape) we became interested in handling Solution Manager changes with ChaRM. We have operable ChaRM in SolMan 4.0 SP12.
We have DEV and PRD for SolMan so we are talking about two system landscape.
Has anyone of you done this? Does it go the same way as if SolMan was a real satellite system (rfc's=>tms=>ibase=>organization=>project=>MC=>CRs = order of configurations roughly).
I tried searching specific instructions for this deployment but it seems that configuration guides etc focus on satellite system handling. Our need is basically to document and control SolMan changes and with ChaRM we could.
Perhaps there is no magic to this and everything goes just like in satellite, but I would appreciate any experiences others may have had doing this.
Kind regards,
Auli

Hello,
We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
Hope this helps!!! Thanks
Vish

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Whether T-CODES change with version updates

Hi All,
Can any one tell me whether the t-codes change with version updates or not.If they change how to find out those t-codes.
For example,I am having some ABCD t-code in 4.7 and if it changes to DCBA in 6.0,How we can find all these changes t-codes.Any t-code to find all changed t-codes
thanks in advance,
Ravee..

Hi Ravee,
After upgradation some tcodes are change with the old name and put N at the end of existing tcode. For example old t-code is me51 and new tcode is me51n.
Some more t-code are also intruduce.
Regards,
Anil

Why didn't Numbers download with Maverick update? It says I have to pay $20 for it? I thought it was free? What did I do wrong?

Numbers didnt download with my new maverick update. To my understanding, its supposed to be free? Is this correct? Now its saying I have to spend 20 dollars to download it. What went wrong? How do I fix it?
Thanks

It is not free as part of upgrading to Mavericks. It is free if you owned a previous version only - the upgrade is free for people who already have iWork apps.
Or, if you bought a complete new Apple computer on or after Oct.1, 2013 it is free.
Otherwise, if you've never owned any iWork app at all, you have to buy it.

[T530] Change Lenovo Power Manager Profiles with [Fn]+[F3]

T530, 2429-5ZG
OS: Windows7 Pro SP1 (x64)
Power Manager 6.45
Lenovo Power Managment Driver 1.65.05.21
Hello everybody. I hope someone can help me out as I can't solve this problem myself.
I used to have a R52 where I could use the keyboad shortcut [Fn]+[F3] to choose between the power profiles or to switch off the display.
Using the T530 now, the shortcut [Fn]+[F3] just locks the screen instead of choosing between the power profiles.
Is there a way to make it work like it did on the R52? I did find the executable (C:\Program Files (x86)\ThinkPad\Utilities\PWMOSDV.EXE). Is there a way to "reprogram" the key shortcut not to lock the screen but to execute the PWMOSDV.EXE file?
I would appreciate any help.

- [Fn]+[F7] -> choose between internal or external monitor or both.
- I know that option tab from my R52, but there is no such option in my Version of Power Manager (v6.45)
The problem is, that even in the manual provided for the T530/W530, in the chapter for the "special keys", there are no keys defined for choosing between the power profiles, it also says that [Fn]+[F3] locks the screen.
What thinkpad model and Power Manager Version do you use?
PS: I browsed the forum and I'm not the only one missing this option:
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W530-Fn-F3-F4-and-F5/td-p/958229

Power Manager crash with with Explorer searches

Hi,
I had the same problem with ver. 6.07 repeating over and over again during last few days. It started when I switched the Explorer file search parameter from "search file names only" to "search file names and content" (Tools > Folder Options > Search > ...).
This morning I switched back to "search file names only" and no crashes so far...

The steps to reproduce the error are those I outlined above; the issue reproduces on my equipment 100% of the time. With the system booted and running normally:
1) Click the taskbar's 'Start' button.
2) In the 'Search programs and files' textbox, enter any two characters (e.g. 'ab')
3) A Power Manager dialog is displayed stating that "Power Manager has stopped working...To search for an update that will resolve this issue, click Next..."
4) Click 'Next'. A Power Manager dialog is displayed stating "No update exists to resolve this problem."
5) Click 'OK'. A Power Manager dialog is displayed stating, "Lenovo is constantly working to improve driver and software quality. Unfortunately, we did not identify a solution to this issue at this time. It is recommended to send an Error Report to Microsoft to help track the resolution to this problem. Click Next to report this problem
6) Click 'Next'. A Windows Explorer dialog is displayed offering three options: a) 'Check online for a solution and restart the program', b) 'Restart the program', and c) 'Debug the program'. There is also a 'View problem details' button.
7) Clicking the 'View problem details' button yields the following
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             explorer.exe
Application Version:                           6.1.7601.17567
Application Timestamp:                     4d672ee4
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17725
Fault Module Timestamp:                  4ec4aa8e
Exception Code:                                  c0000005
Exception Offset:                                000000000002b1ed
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  85ea
Additional Information 2:                  85ea31b15d038786abb000c0d9d9269c
Additional Information 3:                  b4bd
Additional Information 4:                  b4bd3537dddea6bb1063e81566f4d641
Clicking the 'Check online for a solution and restart the program' yields no solution; it simply restarts Windows Exporer.
If you want someone to 'provide a crash dump', you'd be wise not to assume they have the requisite knowledge to perform such a task.

Power management problem with USB modem

I now use a MS-6743 (i865G) board. My previous board was MS-6533, it did not have USB v2.0.
The problem is my Aztech (originally Smartlink) USB modem prevents the system going into standby mode but this should be a USB 2.0 issue because I'm using the same driver for the modem like previous mainboard config. I could go into standby mode flawlessly with my old board.
Furthermore I'm using USB keyboard, mouse but no power management property dialog box appear for those devices. So I'm pretty sure the problem is because of USB 2.0. Is there a way to come around this issue? Thanks in advance...

To pin point whether or not IRQs conflicts is to be blamed, please kindly post your IRQs conflicts for us to verify.
A signature of your system setup will proves greater help for others to advice you with more accurate directions and benefits you in the future.
Please read this Moan Guide too.

Xfce4-power-manager & change icon in Xfce4 panel

Hello!
I'm trying to change the appearance for the latest xfce4-power-manager (v1.4.1-2). I use elementary Xfce icons. The former xfce4-power-manager was using the correct (simple black & white) elementary icon in the notification area in the Xfce4 panel. With the latest version, where xfce4-power-manager has to be added manually to the panel, it is using some kind of colourful icon.
Is there some way to tell the program to use the elementary icons instead? I've already tried to edit /usr/share/applications/xfce4-power-manager-settings.desktop. But no dice.
Thanks in advance.

Do you know the location of both, the simple black & white icon and the colourful one?
If you do, you can try the following. Backup the original colourful one and paste a copy of the one you want to use in the same location and with the same name.
Afterwards check if the result is the one you want.
I have myself come across the situation of wanting to change an icon through the .desktop file but in the end it seems that some icons, even in this case maybe?, are hardcoded and can't be changed through a .desktop file.
More than willing for someone to proof me wrong though!

How do I get outgoing mail to work with maverick update?!?!

Argh!! I am a longtime Apple customer, but I am getting sick of this!
I get no outoging mail with the Mavericks update. What to do????
THANKS

Hi there kmorton2,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W.

Power Management Issues with Windows 8.1 RTM on HP Elitebook 8560w

Installed Windows 8.1 RTM on my HP Elitebook 8560w yesterday and am having the same problem as with Windows 8.1 Preview before - power management is not working correctly. The screen will dim real shortly and come right back after the set amount of minutes, but it does not turn off. Standby never occurs. I have the power managent plan set to "balanced", but neither plugged in or on battery do the set timers work. The only thing that works is manually pressing the power button to go into standby.
Anybody else see this problem or is there a bug fix for this?

Windows 8.1 is not an official release, and still a beta program and not officially supported. Also, your EliteBook is a Business model. Your future issues would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Logic Pro 9 visual glitches with Mavericks update

Hi Guys,
I updated to Mavericks on the day of it's release. I'm running Logic Pro (9.1.6) and everytime I hit play I now get these black blocks that follow my playhead. amongst other smaller visual glitches like midi notes appearing in the arrange window rather than the piano roll... I'm not totally convinced this is anything to do with Logic Pro 9's compatibility with Mavericks however the problems only started since the installation.
Any ideas?

I'm rnning Logic 8.0.2 and i am also having this issue. also my Mbox 2 Mini is not working (i know it's not the best interface anyway, but still.

How do I get gnome-power-manager working with standalone Openbox?

I'm brand new to Arch, so sorry if this is a dumb question that's already been answered. I'm installing on a Thinkpad T410, and I want a battery icon in my system tray. I've installed Openbox as a standalone window manager, and I'm using tint2 for a panel and system tray. I need something in my system tray to show my battery status.
I've looked around, and I don't really see any alternative to gnome-power-manager (I looked at trayfreq and batterymon), so I'm attempting to use that. I've installed it, but if I try to run it from a terminal I get this:
GLib-GIO-ERROR **: Settings schema 'org.gnome.settings-daemon.plugins.power' is not installed
aborting...
Aborted
After I get that, it quits and I really don't know what's going on there. Searching for "settings schema not installed" gets me nothing useful, so does anyone have an idea as to how to solve this problem?

n1md4 wrote:This solution worked for me too. I run a vanilla openbox install. Although I now have the battery icon in the panel, when selecting preferences, nothing loads. Any ideas?
From this thread https://bbs.archlinux.org/viewtopic.php?id=118420 the user said it solved it installing gnome-control-center.

Multiple issues with Mavericks update and Mail

I have a MacBook Pro mid 2009 2,53 GHz 13-inch. It has 4GB of RAM and a Hitachi 500GB 5400 rpm disk with about 200GB of free space. After working on 10.6.8 for a long time I have upgraded to 10.9.2. I formatted the internal disk, made a clean install of the new system and rebuilt from a Time Machine backup I had made before. The system has slowed down to snail speed (even the simplest actions like opening a new window in the Finder take at times 10 to 15 seconds with the spinning beach ball appearing. Also (and maybe even more serious) my emails became completely messed up. First, all headers and mails got mixed up and several mails didn’t appear, after rebuilding the mailboxes about 60% of my emails were completely lost. I would like to recover my mails from Time Machine but it’s impossible to access emails from before the system upgrade. Am I doing something wrong? Is my computer really too old? How can I give a second try at importing all my mails from the old system? This is the crappiest update I have ever had (been working on Apple since 1994).

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Did power management change with Maverick update?

Similar Messages

Maybe you are looking for