Did primaryhard disk selt test and received #10008 replace hard disk 1 and then yes or no response

I have 2 issues with hp dv4-2049us did primaryhard disk selt test and received #10008 replace hard disk 1 and then yes or no response and my touchpad mouse is not working Iam using an external mouse and now the keyboard is not working please help

If the hard diskhas failed, there will be unusual things happening with hardware and operating system.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

Error - #10008 Replace hard disk 1

I am pretty sure my hard drive has gone bad from other posts I have been reading.
I dont need any data off of this device. I actually was just about to start deleting old data so I could give this device to a family in need. Went to start the computer to start this process. However, when I went to do this it went to BSOD. Messed with it a little bit, then I got BSOD. I fillany figure out to run test and got the #10008 replace hard disk 1 error.
As I would still like to give this family this laptop, my question is: Where could I buy a cheap replacement hard drive. Is it hard to do? And I dont think I have a back up/ install disk to but on operating system. What would I need to do to get that going and would it be affordable.
I am totally willing to put in the work to get it back up and going, but was woundering if anyone would be willing to give me some instruction on how to do this.
Thanks a million for any advice and help.
This question was solved.
View Solution.

Hi,
Regarding reinstalling the OS on the new HDD, here are two options.
1. You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ). They will also re-create all the original partitions, including the Recovery Partition.
Order HP Recovery Discs.
2. Another option you could consider is to create your own Windows 7 installation disc.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn ( Note: You may want to de-select the additional software offerings during the installation of ImgBurn ) to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. The Windows Image source is Digital River.
Windows 7 Home Premium SP1 64bit.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Additional drivers and software you may need can be found Here.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

TS3540 My iPad is not recognised in iTunes. I have tried all the basic tests and then followed above. I cant locate the file referred to above "com.apple.usbmuxd.plist-orig". Is there anything else I can do?

My iPad is not being recognised in iTunes. I have tried all the basic tests and then followed a series of uninstall instructions. One suggests deleting the following file however I cannot locate it - "com.apple.usbmuxd.plist-orig". Is there anything else I can do?

My iPad is not being recognised in iTunes. I have tried all the basic tests and then followed a series of uninstall instructions. One suggests deleting the following file however I cannot locate it - "com.apple.usbmuxd.plist-orig". Is there anything else I can do?

My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4

My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4

Settings > iTunes and App Store > Apple ID > Sign Out > Sign In with the current Apple ID
Settings > iCloud > (Scroll Down) Delete Account > Sign In with the current Apple ID

Everything on my ipod has been erased!! I updated it, then it told me to plug it in so i did. i plugged it in and then it synced by itself. i dont know what to do!!!

hello people
Recently i updated my ipod touch 5th gen to ios 7.1.1
after i did that it told me to connnect to it to itunes which i did.
then it synced by itself and then when it finished syncing, my ipod restarted and went to the start screen(the one u get when u just set up ur ipod)
Now i have lost over 8000 photos and 20 videos and other voice recordings and homework notes. Im thinking by it self syncing does that mean that it has overlapped the previous files?
CAN ANYONE PLEASE HELP ME!?!?

Restore from backuip
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT5312 after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure and then I cannot login? now my iPhone has got all the cotacts lost.

after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Why did my external HD fail and then come back?

The weirdest thing happened to my external hard drive and Time Machine.
I have a 2012 Macbook Pro Retina, 2.7 GHz with 16 GB of memory. It's software is 10.9.2 and has 500 GB of flash storage. So far I haven't had any gimmicks, but to be safe I use Time Machine in conjunction with a Buffalo Ministation HD-PCTU2 for backup. I purchased this with the computer (about two years). A few days ago it seemingly died --Disk Utility couldn't verify or repair it, and it wasn't mounted. I couldn't access the hard drive in Finder or anywhere else. Disk Utility couldn't tell how much memry was being used. The actual hard drive sounded and looked fine, purring away whenever plugged in. Before it stopped working, I pulled the cord by mistake without properly ejecting.
Today I wanted to buy a new external hard drive but beforehand, I used Disk Utility to make sure I couldn't repair/re-mount my old one. Still didn't work. When I was researching hard drives online, I left the hard drive plugged in. Time Machine mysteriously popped up and asks me if I wanted to use HD-PCTU2 as my backup disk! It's now on my desktop, fully accessible, and my old backup are there too. Working exactly as it should.
Any ideas about what happened? Why did Time Machine suddely recognize my hard drive after not working? Why didn't Disk Utility work? Should I play it safe and buy a new external hard drive?
Thanks in advance!

Two backups are 10 times safer than one and three or four are a 100 times safer than one.
I use Carbon Copy Cloner to make bootable backup clones on multiple External HDs. I don't require hourly backups and so I stopped using TM a few years back. I keep two clones close by and update them daily. The others get backed up weekly and are kept in safe places like the fire safe and off site.

How to create a page that tests and then creates a valid DB LINK connection

The problem is that I'd like to create a page that has all the necessary fields (name, host, port, etc) to create a database link just like the one in the SQL workshop - I'd prefer to have it done this way so as to limit the users from using SQL workshop. But i'd also like the DB Link tested before created.
I've tinkered around a bit and was able to create the database link using a page process that calls an execute immediate statement to add the database link using items in the form section, however I'm confused as to how I would test the connection before hand.

but rather the concept of a page that reads from table (maybe a "report?") to provide a result set of data which the user can click on a result to direct to another page.You are on the right track with the idea of an initial page with a report region listing your reports as links. Not sure from the provided information if this out of the box capability will meet your actual requirement, but try the Create Page wizard > New page > Form > Form on a Table with Report as a first approximation.
instead of creating unique individual pages for each of the 100 Oracle Reports, featuring the report's attributes (parameters, etc), what do I need to do just have one APEX page that dynamically reads from the table and builds the Region and its Items based on what's in the table?If this can't be handled using the built-in Form on a Table with Report design pattern, it sounds like it will be possible using a dynamic form generated using the [APEX_ITEM API|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/api.htm#BGBHDGAI] either as another report region or a PL/SQL Dynamic Content region.
Also, any reference books that you guys recommend on the ins/outs of APEX? [Pro Oracle Application Express|http://www.amazon.co.uk/gp/reader/159059827X/ref=sib_dp_pt#reader-link], the authors of which are active voices on this forum, is a good book. The forum itself is an unbelievable resource, as is the hosted service for learning and experiment at [apex.oracle.com|http://apex.oracle.com/i/index.html].

My airport time capsule did not set up successfully, and then status light flash amber

Hi, Guys
I am the first time user of the time capsule, please help how to proceed?
I have set up the first time and my airport time capsule does not set successfully, then I try to reset to factory setting. After this, although I use the ethenet cable to connect the router to the airport, the status light flash amber, always, even after the reset.
Also, I can see that airport time capsule base station from the wireless network when airport is plugged in. However, when I want to access to it.

Thanks for your guidance, but the product is really anoying. First, I am sure that the airpor utilities is 6.3.
and I also follow your instruction that to set the IPv6 as local link mode. But still get the same error as mentioned in my first post.
Therefore, I have tried to use the bridge mode but could not find it, and therefore still can not set it up successfully, even though I reset the factory again(press the reset button 5 secconds at least).

Getting "replace hard disk error (#10008)" even after replacing hard disk

Hi!
My laptop- HP Pavillion dv 6502- is 4 years old.
Recently, the hard disk supposedly crashed as I was not able to get anything other than a blank screen. I checked with BIOS diagnostics, and it showed error #10008- Replace Hard disk.
So, I went to an hp service centre and got the hard disk replaced.
My earlier hard drive was a Seagate 160 gb momentus 5400.3 disk.
New one is the Seagate 250 gb disk.
The laptop was working properly the day the hard disk was replaced. BIOS diagnostic status for the disk was "Passed"
But, the very next day when i tried starting the system, I got a blank screen again. I again went to BIOS and ran the diagnostic test. I performed the test twice. It took a lot of time to finish- jumping from Reaching till '80% complete', then jumping back to '10% complete', then '90% complete', then '10% complete', and so on.. finally showing '100% complete' and status : #10008 - Replace hard disk - both the times.
Then, I had to go out of station and so, I didn't touch my laptop for 2 days. When i came back, the computer was working fine and the BIOS test status said "Passed" for the disk
What could be the problem due to which my problem wasn't starting earlier- even after replacement of disk? Is it possible that the disk was not the problem in the first place?

Hi!
Turned out the second new Hard disk was also not fine. I went back to the service centre and got the hard disk replaced again. This time the laptop has been working fine.

Question of SAP Methodology of Implementation esp. System Testing and Test Script

Dear SAP Member,
As a very new and inexperienced customer to the SAP and the business. My company is preparing for the retail shop establishment which part of the preparation includes SAP implementation.
At first, we strongly believe SAP can fit and serve our business need well. Also, the standard methodology of implementation will be able to deliver the system with expected quality. However, the local implementor disappoint my firm with poor quality delivery and control that result in the perception of uncertainty of the system to be lived.
The methodology proposed by the implementor composed with
1) Preparation
2) Blueprint
3) Realization
a) Program development and unit test by vendor
b) Training
4) Final Preparation
a) Integration test by Users
b) Data conversion preparation
5) Go-Live and Support
My problem comes up with phase 4-5
Problem 1: Unit/functional test performed by implementor . For this activities, how could customer ensure that every single function has been developed or implemented according to the requirement and without error?
Problem 2: Vendor provides slot for integration test for 7 days. Is it normal practice that test can be done within this short period?
Problem 3: Does SAP methodology has the standard quality control, test enter and exit criteria and issue/incident management?
Problem 4: How should the standard test script look like? What i received from implementor was like functional list rather than script.
Problem 5: what should be step for conversion apart from the data preparation by users? The local implementor does not explain/elaborate the detailed activities.
Last but not least, as the customer do not satisfy with the SAP partner (local implementor quality). What should be the process for feedback as to prevent other new customer to face the same problem?
SK

SK,
Thamil has given his view. Here is another.
how could customer ensure that every single function has been developed or implemented according to the requirement and without error?
If this is an issue to you, you can insist that members of your test team participate in unit testing. You are, after all, the client, and it is your money being spent. As long as you can furnish testers, who are competent to evaluate unit testing scenarios, you can have them work with the vendor during unit testing.
Vendor provides slot for integration test for 7 days. Is it normal practice that test can be done within this short period?
It depends on what is being implemented. I have seen implementations which contained over a hundred test scenarios and over 2000 test scripts; each of which must be tested by multiple functional groups. 1 week is not enough to complete Integration testing in this case.
Also remember that it is necessary to allow time to correct 'bugs' found during integration testing, and then to re-test after the bugs are fixed. Except in the simplest of implementations, 1 week may not be enough to accommodate the bug fixes and retests.
Does SAP methodology has the standard quality control, test enter and exit criteria and issue/incident management?
Which 'SAP methodology' are you talking about? Bottom line, the client must insist that the vendor incorporate any methodologies that are required for his business. Don't assume that your vendor will automatically bring these items to the table, YOU may have to bring them to the table.
How should the standard test script look like? What I received from implementer was like functional list rather than script.
????? It should look like whatever you want it to look like. Many companies have existing templates. If your company doesn't have such a template, ask your vendor for one. Go over it together with him and make appropriate modifications that meet your business requirements.
what should be step for conversion apart from the data preparation by users? The local implementer does not explain/elaborate the detailed activities.
It is impossible to say at the beginning of the project. Sometime during realization, the client and the vendor will jointly develop a detailed cutover plan. More importantly, the client will develop a change management plan for the client company, in which all stakeholders in the client company will come to understand how and when ALL of the client's business processes will need to change, and to develop plans for all affected groups.
Best Regards,
DB49

Parametrized Tests and IRunListener issues

Hi,
I'm currently working on fixing flexunit 4.1 support for Flexmojos and have run into some problems with the new Parametrized reports.
In Flexmojos we usually counted the number of tests and then decremented that number each time a testFinished was called. Unfortunately with parametrized tests we can't expect the number of times the IRunListenertest.Finished functions is called to be equal to the number of test functions. This resulted in Flexmojos reporting an "all is ok" each time the number of executed tests equals that of counted test functions. All failling tests beyound that point would stay undetected, which is rather undesirable.
My question now is, with the introduction of parametrized tests, is there a new Interface I can use instead of "IRunListener" that somehow provides callbacks for "testCaseStarted" and "testCaseFinished"? For example if one test function would be executed 2 times I would expect the callback sequence to fe as follows:
testRunStarted
testCaseStarted
testStarted
testFinished
testStarted
testFinished
testCaseFinished
testRunFinished
If such an interface doesn't exist ... how could I implement something similar?
Chris

Ok well in the meanwhile I solved the problems by restructuring the flexmojos unit test support in general.

10.9.2 keeps freezing and then today it crashed for no reason.

retina late 2013 running 10.9.2
machine has only been up and running for about 30 days but after 2 weeks I was having it freeze - unresponsive, no cursor - so I have had to power off. Occassionally it will let me move the mouse but nothing else - vpn time connected will show as frozen too. I do use Virtual Box running windows 7 in it and this is almost always up (4.3.8 r92456) and I connect via a thunderbolt adapter for ethernet. Any thoughts?
here is a log from the system crashing
Anonymous UUID:
61D585F4-8E03-FB05-D599-E8C3E027A797
Wed Mar 5 13:55:31 2014
panic(cpu 2 caller 0xffffff8015c54d3d): "a freed zone element has been modified: expected 0xdb989f539f40ca02 but found 0xffffff80fba01d88, bits changed 0x246760d364e0d78a, at offset 0 of 32 in zone: kalloc.32"@/SourceCache/xnu/xnu-2422.90.20/osfmk/kern/zalloc.c:461
Backtrace (CPU 2), Frame : Return Address
0xffffff81080533e0 : 0xffffff8015c22fa9
0xffffff8108053460 : 0xffffff8015c54d3d
0xffffff81080534a0 : 0xffffff8015c5251f
0xffffff8108053500 : 0xffffff8015c51df9
0xffffff8108053600 : 0xffffff8015c2aa6f
0xffffff8108053630 : 0xffffff8016083c5f
0xffffff8108053650 : 0xffffff7f977befb6
0xffffff8108053680 : 0xffffff7f977bd27f
0xffffff8108053850 : 0xffffff7f9774b222
0xffffff81080538a0 : 0xffffff7f9774b138
0xffffff81080538c0 : 0xffffff7f9774c780
0xffffff81080538f0 : 0xffffff7f9773b6c3
0xffffff8108053940 : 0xffffff7f977b932e
0xffffff8108053980 : 0xffffff7f977b3e79
0xffffff8108053a20 : 0xffffff7f9773a904
0xffffff8108053a50 : 0xffffff7f9773abbb
0xffffff8108053a80 : 0xffffff7f977466f8
0xffffff8108053ac0 : 0xffffff7f977b8b43
0xffffff8108053ae0 : 0xffffff7f97738cd5
0xffffff8108053b70 : 0xffffff80160cd26a
0xffffff8108053b90 : 0xffffff80160cddce
0xffffff8108053bf0 : 0xffffff80160cb81f
0xffffff8108053d40 : 0xffffff8015cb6558
0xffffff8108053e50 : 0xffffff8015c26bf1
0xffffff8108053e80 : 0xffffff8015c139f5
0xffffff8108053ef0 : 0xffffff8015c1e043
0xffffff8108053f70 : 0xffffff8015cc976d
0xffffff8108053fb0 : 0xffffff8015cf3b46
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily2(98.14)[30D694F4-CF00-3CC3-9732-C6DEB6986B57 ]@0xffffff7f97733000->0xffffff7f97797fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f962bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f96b17000
com.apple.driver.AppleIntelHD5000Graphics(8.2.4)[124FA25C-29F6-31EE-9C5E-38D7883 ACAAC]@0xffffff7f977a5000->0xffffff7f977f4fff
dependency: com.apple.iokit.IOSurface(91)[BC96A900-DD9D-3F36-AFE6-EF88CB4B3607]@0xffffff7f9 69d0000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f962bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f96b17000
dependency: com.apple.iokit.IOAcceleratorFamily2(98.14)[30D694F4-CF00-3CC3-9732-C6DEB6986B5 7]@0xffffff7f97733000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:
0x0000000015a00000
Kernel text base: 0xffffff8015c00000
System model name: MacBookPro11,1 (Mac-189A3D4F975D5FFC)
System uptime in nanoseconds: 13771915424548
last loaded kext at 13685748958866: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7f97cfd000, size 49152)
last unloaded kext at 13750263429657: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7f97cfd000, size 32768)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp
4.3.8
org.virtualbox.kext.VBoxNetFlt
4.3.8
org.virtualbox.kext.VBoxUSB
4.3.8
org.virtualbox.kext.VBoxDrv
4.3.8
com.apple.nke.pptp
1.9
com.apple.filesystems.autofs
3.0
com.apple.iokit.IOBluetoothSerialManager
4.2.3f10
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AGPM
100.14.15
com.apple.driver.X86PlatformShim
1.0.0
com.apple.driver.ApplePlatformEnabler
2.0.9d1
com.apple.driver.AppleLPC
1.7.0
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleHDA
2.6.0f1
com.apple.driver.AppleIntelHD5000Graphics
8.2.4
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleCameraInterface
4.26.0
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.AppleThunderboltIP
1.1.2
com.apple.driver.AppleIntelFramebufferAzul
8.2.4
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.driver.XsanFilter
404
com.apple.driver.AppleUSBHub
666.4.0
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.iokit.AppleBCM5701Ethernet
3.8.1b2
com.apple.driver.AirPort.Brcm4360
831.21.63
com.apple.driver.AppleUSBXHCI
670.4.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleUSBHIDMouse
180.9
com.apple.driver.AppleHIDMouse
180.9
com.apple.driver.AppleUSBHIDKeyboard
170.15
com.apple.driver.AppleHIDKeyboard
170.15
com.apple.nke.ppp
1.9
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.driver.DspFuncLib
2.6.0f1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.5fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.driver.X86PlatformPlugin
1.0.0
com.apple.driver.IOPlatformPluginFamily
5.7.0d10
com.apple.iokit.IOSurface
91
com.apple.iokit.IOBluetoothFamily
4.2.3f10
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleHDAController
2.6.0f1
com.apple.iokit.IOHDAFamily
2.6.0f1
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.AppleGraphicsDeviceControl
3.4.35
com.apple.iokit.IOAcceleratorFamily2
98.14
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.driver.AppleThunderboltDPInAdapter
3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily
3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter
1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IOEthernetAVBController
1.0.3b4
com.apple.driver.AppleThunderboltNHI
2.0.1
com.apple.iokit.IOThunderboltFamily
3.2.7
com.apple.iokit.IO80211Family
630.35
com.apple.driver.mDNSOffloadUserClient
1.0.1b5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
675.4.0
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: MacBookPro11,1, BootROM MBP111.0138.B03, 2 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 2.16f58
Graphics: Intel Iris, Intel Iris, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Thunderbolt Ethernet, Ethernet, en4
Network Service: Wi-Fi, AirPort, en0
PCI Card: Apple 57762-A0, Ethernet Controller, Thunderbolt@195,0,0
Serial ATA Device: APPLE SSD SM1024F, 1 TB
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Keyboard Hub
USB Device: Apple Optical USB Mouse
USB Device: Apple Keyboard
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.2
Thunderbolt Device: Thunderbolt to Gigabit Ethernet Adapter, Apple Inc., 3, 5.5

I'm no expert on these crash logs so maybe somebody with more experience can comment. But if you look at the list under loaded kexts, the four at the top are all for virtual box, and I think they're listed in reverse order, so it's usually the ones at the top of the list that are causing the problem.
You can try a safe boot (restart, hold down shift until you see the Apple logo). This does some diagnostic testing and then starts up without third-party added on software, including third-party kexts like those from Virtual Box. If this eliminates the symptom, then you know the problem is with the third-party software. A safe boot doesn't fix anything, but it tells you where the problem is. Mac OS X: What is Safe Boot, Safe Mode?
(strictly speaking a safe boot shouldn't fix anything, but sometimes running it does seem to fix things.)
I've been looking for a reference online (free would be good) for interpreting Mac crash and kernel panic logs and I haven't really found one yet.
Alternatives to using Windows:
I try to stick with Apple software in the first place. I don't even like using the Mac versions of Office.
there are two ways to run PC software on Macs without windows:
crossover Run Windows on Mac, easily and affordably - CodeWeavers
WineBottler | Run Windows-based Programs on a Mac
Crossover is more user-friendly, but Wine is free (or maybe donationware). Many PC apps will work with them, some won't.
I have only one PC app, which I use with Wine. It's an anatomy atlas that has never been available for Mac, unfortunately.

Did primaryhard disk selt test and received #10008 replace hard disk 1 and then yes or no response

Similar Messages

Maybe you are looking for