Did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

Why not contact HP tech support for assistance since they make the printer. While on their site you can look for an updated printer driver. Otherwise, try deleting the current installed driver, reset the print system, then reinstall your printer's driver.
Mac OS X- How to reset the printing system

Similar Messages

  • I have win7, outlook 2007 tried to sync with icloud but i get an error message and the calendar is blank.  Thanks apple? Any suggestions from the community?

    I have win7, outlook 2007 tried to sync with icloud but I get an error message and my calendar is blank.  I do not see my outlook calendar, on the left pane under all calandar I see my me account checked and all others are unchecked. I looked at icloud and all the data is in and the iphones syncl with ipad but something is not right with my PC Outlook.   I cannot get back to the good old mobileme. Thanks APPLE? Any suggestions from the community?

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • Interactive PDF with buttons printing blank pages

    Hi
    I am creating interactive pdf's using indesign cs6 on MAC which have buttons that show and hide other buttons when clicked, i have checked printable for all of the buttons as i want the buttons to be visable when printed.
    When i export it everything is fine and all works well and when i print the document from the MAC it prints fine but when i come to print it from the PC it prints blank pages. This is a issue as these documents will be printed from a PC, I have tried different PC's to see if it was mine that wasnt working but the result is the same, printing blanks.
    Is there any way to overcome this problem?
    Best Regards
    Rob

    On the Mac go to File>Export and choose pdf like you normally do.
    With the pdf settings that work make sure you click the "Save Preset" button.
    Exit out of the PDF export dialog box and go to
    File>PDF Presets
    And Define them
    From here select your Preset that you just saved and Save it to the hard drive.
    Load this PDF Preset into the PC settings.

  • ITunes update causing error messages

    Hi all.
    This is my first time posting, please forgive any faux pas.
    I installed the new update from itunes.
    It would not install and told me there was a problem, but i did not write down the problem. I restarted the computer in the hope i could fix it with a tweak.
    However i then received the APSDaemon.exe System error.  The programme can't start because MSVCR80.dll is missing from the computer. Try reinstalling the programme to fix this problem.
    I uninstalled iTunes, tried reinstalling but keep getting  a message to check my privileges.
    I have done a sfc/scannow, in command prompt in safe mode and normal mode, which is not showing any problems.
    Used the MS fixit tool to completely uninstall iTunes, tried reinstalling, still the same message.
    i seem to have followed all the advice advertised under the APSDaemon.exe. error messages.
    Restarted, 4 more attempts and installing with the admin message. I am using the admin account to do all of this in.
    It has now been 3 days since it happened and i still cannot find a cure.
    I have had suggestions to plug my phone into the pc in the hope it may resolve the issue, but i am worried in case it mucks up the phone as well.
    There seem to be a lot of people who have suffered the problem but most of the recommended actions have not helped resolve my issue.
    ( it could be me i guess).
    Thanks for any help offered.

    Me again.
    I have spent all day working on this problem.
    I have finally fixed it by myself!!
    As no one responded to my plight, and in case anyone else has the same problem, here is how (i think) i sorted it.
    The only way that i could reinstall iTunes successfully was to go into the control panel and under publisher uninstall each and every item that had an Apple inc. name by it.
    After reinstalling it, i had to then download quicktime etc and reinstall that too.
    Hopefully when i restart the computer all will be ok.
    If not i will be back.
    Thanks anyway

  • Apple TV update causing error message.

    I recently did an update on my Apple TV and after performing it I'm now getting an error message that my HDMI cable needs to be connected to a HDCP port (which I presume my TV doesn't have). I can no longer watch anything on iTunes or netflix. How do I fix this?

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another cable.
    Try restarting the Apple TV
    Try the Apple TV with another TV

  • MDO Update causes error message

    Hello,
    I am currently trying to update to an MDO that first gets data inserted to and then gets data updated.
    The insert works fine, but for the update I get the following:
    com.sap.xmii.Illuminator.logging.LHException: java.lang.NullPointerException: while trying to invoke the method java.lang.String.equalsIgnoreCase(java.lang.String) of a null object loaded from local variable 'sKey'
    This worked on SP03 and is now broken on SP05.
    Can someone please propose a solution.
    Regards
    Christoph

    James Bouret's problem is fixed -- or maybe not.
    From my blog: +We traced the problem to "something bad" about the folder or its contents that was being reported. By opening the library and the vault with control-click Show Package Contents and navigating down, it was possible to trash the folder. Not only did the vault update complete once that was done, but it worked many, many times faster than before. The bad news is that I think this is due to a bad spot on the disk, indicating a drive that is on its way out. If you have vault problems: back up carefully and consider that you may have a bad disk.+
    A bad spot on the disk may also be the reason that Johnny Cappuccino could fix his problem by modifying the image. That will have rewritten the sidecar files, a process that usually involves creating a new temporary file and then atomically deleting the old file and renaming the new one. So the new file is shiny and good and the bad spot is ready for use by another hapless program.

  • Updating to Itunes 10.5 causes error message and won't open

    I have tried updating to 10.5 three times now. Everytime I get the same situation:
    After running the update, iTunes says it installed successfully, B.S.
    Message window pops up " entry point in SQlite.dll cannot be found, error 7 windows error 127
    Please reinstall iTunes"
    System restore does not solve the problem. I have to go thru the process of completely unistalling all Apple components involved with iTunes, including Quicktime and Bonjour. The I use the iTune 10.4.1 installation file to reinstall my older iTunes to be able to use it again with my iTouch.
    This costs me about 2 1\2 - 3 hours of time to get back to normal.
    Any IOS 5 Ipod will not work with the older version of iTunes and I don't know if it's possible to revert one back.
    This is a very frustrating situation that Apple has created with them assuming any update will go smoothly.
    Anyone encounter this situation?
    iTunes 10.4.1 has worked fine. I have updated numerious time in the past year and they went smoothly except for a problem with iTunes helper not functioning right.
    I am running windows 7 32 bit
    Any ideas are greatly appreciated

    okay so here is what I am doing now...
    uninstalled itunes and all apple products
    downloaded 10.4 form here...  http://www.oldapps.com/itunes.php?old_itunes=6278
    when iTunes loaded and asked if I wanted to update iTunes click "NO"
    backing up phone on iOS4 and about to update iPhone 3GS
    wish me luck

  • HT1218 When trying to update Airport Express firmware I get an error message and it won't update.

    When trying to update my Airport Express firmware I get an message that an error occured and it can't update.

    most likey.Here is the new article apple has on it http://support.apple.com/kb/TS5376

  • I have a Mac leopard.  Did a recent recommended update.  When it finished,I restarted then a window came up to enter Master Password.  I don't know what it is  and when I try to enter one, the window shakes and I am unable to use computer at all

    I have a Mac leopard.  Did a recent recommended update.  When it finished,I restarted then a window came up to enter Master Password.  I don't know what it is  and when I try to enter one, the window shakes so I am unable to use computer at all.

    Please confirm exactly what Mac this is, and what 'recent update' you installed.

  • Got big problem with my iphone , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    How do you know its charging very very slowly? Is the screen back on?
    Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
    Just leave the phone in and do what is said above.
    How long do you think it will take to charge to 100%?

  • OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

    OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
    The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
    Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
    Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
    I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
    Here's what I sent to Apple tech support:
    Guys/Gals (OS X Engineers):
    Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
    Please. Just do the right thing and fix the audio.
    There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
    And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
    Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
    Crikey!
    iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
    Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM   Mac OS X (10.4.9)   20 Years of Microsoft-Induced Grey Hair

    Libby,
    Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
    http://www.macmaps.com/backup.html
    But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
    I suggest starting a new thread here, where someone else could help you out better:
    http://discussions.apple.com/forum.jspa?forumID=752&start=0
    First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

  • Update 12.1 installed with Error 7 (Windows error 126).  Reinstalled.  Same error.  Uninstalled all Apple products.  Reinstalled iTunes.  Same error.  Updated to 12.1.1. Same error message.  Uninstalled everything.  Reinstalled 12.1.1.  Same error.

    Update 12.1 installed with Error 7 (Windows error 126).  Reinstalled.  Same error message.  Uninstalled all Apple products.  Reinstalled iTunes 12.1.  Same error message.  Updated to 12.1.1. Same error message.  Uninstalled everything.  Reinstalled 12.1.1.  Same error message.  iTunes runs and plays my music, but the error message remains.  It doesn't hinder my music playing, but it is annoying.  And, this is all done on my work computer.  I have not unpdated iTunes on my home laptop, cause I don't want to have to deal with this error message.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

    while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

    - What was the error message?
    - Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod.  If the iPod shows in iTunes then you can try again.  However, You should try to resolve the error message first.
    - If iTunes does not see the iPod try reetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

  • I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
    I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
    Open Office is free, you can download it here:
    Open Office for Mac

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

Maybe you are looking for