Did slm need install addional daa?
hi all,
I'd installed daa with the slm71sr1 installation.
and in the solman_setup phase "managed system config" step 4 "assigns diagnostics agents" show "no agent found".
Best Regards
B&B
Hi Bbs,
You need to connect the Diagnostic Agent to Solman dispatcher
Goto the below directory
/usr/sap/DAA/SMDA<XX>/script/
Run the below command under daaadm user
smdsetup managingconf hostanme:"solman host name" port:"5XX04" user:"solman_admin" pwd:"password of solman_admin user"
where XX is the CI instance number.
Then repeat the steps 4
With Regards
Ashutosh Chaturvedi
Similar Messages
-
i have install the GM version for my iPod Touch,did i need to do anything to change to public version? restore or else?
Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.
-
Did a clean install of Mavericks and need iMovie 9 back
Hello,
I did a clean install of Mavericks. Obviously, I needed to re-install everything. I thought re-installing everything would be no problem but boy was I wrong. I'm one of the unlucky ones who cannot install iMovie 10. At this point, I'd like to revert back to version 9 but it's no longer offered in the App store and when I try to download it from Apple support, it says I need a prior version installed. So I am now stuck in limbo. Any suggestions on how to get back to version 9? I've lost interest in bothering trying to install v10. I just want 9 back at this point.in a way I also want imove 9 back and certainly I also had issues when installing mavericks forced imovie 10 to be installed - ie when I tried to start imovie after mavericks, it refused to start up until I install imovie 10.
Yesterday after mavericks was installed, the app store/installer/the powers that be just started downloading & installing other stuff like new iphotos, xcode, new voices I used in speech, etc. When it came to imovie's turn, it did fail to install for me, unlike the other apps which seemed to have installed fine (but I have not used yet).
Today when I tried to use imovie, the app store app got started automatically and told me I needed to update to imovie 10. The apps store just sat there for a long time saying "updating" and then after a long time a notification popped up saying the update failed (again).
Then I clicked on the "purchased" tab instead of the "updates" tab of the app store app, and it listed the apps I "purchased" of which imovie was one of them. The button on the right of that entry said "download" or some other word indicating an update was needed. I clicked on that and then imovie 10 installed fine,
I have since used imovie to produce a clip. Hope this helps you. -
I need some help uninstalling Acrobat 8 that did not completly install because of I believe my Windo
I need some help removing, uninstalling Adobe Acrobat 8 that did not completely install because of I believe my computers operating system Windows 7 Ultimate. I purchased Adobe Acrobat XI and it will not install until I remove the old Adobe Acrobat 8.
Hi Wzachare,
http://helpx.adobe.com/acrobat/kb/manually-remove-acrobat-8-windows.html may help.
Thanks!
Eshant -
Did a clean install 10.9.4. on a Apple Stock 1TB Fusion Hard Drive. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX" in every dev/disk** Everything is out of place, How can I repair? Im willing too reformat if need be, however thats what I did in the first place. Any help would be much appreciated, thank you.
I know this cannot be correct
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: *121.9 GB disk7It appears as if my startup disk has been reversed and not using the fusion ssd portion as it should. At least its now reversed as to what it used to be originally before. the 128gb ssd used to be on top. Is my mac booting fusion correctly? Thank you for responding as I was about to reformat.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
=========================================================
Name: fusion
Status: Online
Size: 1120333979648 B (1.1 TB)
Free Space: 114688 B (114.7 KB)
|
+-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 999345127424 B (999.3 GB)
|
+-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
Disk: disk2
Status: Online
Size (Total): 1111826497536 B (1.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion
Volume Name: Fusion
Content Hint: Apple_HFS
FoHeazys-Mac-mini:~ FoHeazy$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2 -
I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??
If you didn’t erase the drive and install using you AppleID, then the OS and the purchased apps are still registered to the other AppleID. You cannot change that by logging into iCloud. Apps are forever tied to the AppleID used to purchase/download them.
You have to erase the drive and download/install the Apps using your AppleID. -
How do I get idvd on my computer? It did not come installed even though I have ilife
How do I get idvd on my computer? It did not come installed even though I have ilife? Also, no operating system dvd came with my computer. I have had it for 5 months so its quite new.
iDVD is no longer developed or shipped by Apple. You can purchase an iLife 11 disk (if you can find one) or purchase an alternative DVD authoring app.
SInce 10.7 should you need to re-install you do so via the Recovery partition and/or the App Store.
http://reviews.cnet.com/8301-13727_7-20083166-263/managing-the-os-x-10.7-lion-re store-drive/ -
Hello I have lost my serial number for adobe photoshop elements 13. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it installed again/replacement? Thanks
Do you have the receipt? If you have proof of ownership, you _may_ be able to persuade Customer Support to help you out. I imagine you would need to scan and email that proof if it works at all.
-
Apple genius did an Archive & Install on my OS. Got home-no pics in iPhoto
Hi,
My iMac wouldn't start and nothing I did was helping, so I took it into the Apple store. After trying a few things, the genius did an Archive & Install of Tiger, and everything appeared to be fine. So, I happily went home.
However, later in the day, I opened iPhoto for the first time and there were no photos showing up. No dotted outlines-- nothing. At the bottom, it says that the library contains 0 photos. When i look in the library folder in finder, I see that all my pictures are there and the folder is several GB large. However iPhoto, apparently, doesn't want to see them.
Now fortunately, I'm good about backups and I have a backup library that is usable and I'm pretty sure I won't lose anything (definitely not much). But this is weird and frustrating to me-- does anyone know how I might get my old library to show up exactly as it was (and as it is in the photo library folder)???
Any help is greatly appreciated.
Thanks,
SSSS:
Since your image files are still in the Originals folder you can start a new library and import the originals from the old library. That's about your only option as the database file, Library6.iPhoto, has been overwritten and lost all the information about the photos. Here's how to go about it:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
Once this is completed you can delete the iPhoto library folder from the desktop. If desired, you can keep the older library folder to try other fixes on it.
In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar loss all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Did a new install of Windows 7 and Adobe, but CS won't activate.
Have Adobe Creative Sweet Premium from a couple years ago. Did a new install of Windows 7 and Adobe, but CS won't activate. Probably did not de-activate the old product. I paid for it though and have the install disks and serial numbers.
The adobe.com/go/activate website is less useful. Been on live chat for 20 min. It says an agent is available but no one responds. Help?Mylenium,
That was a good start. Need one more helpful hint. I just found the Adobe DVDs. It is actually Creative Suite 5 Design Standard. It would be nice to put on a box without a DVD player. Can you please provide me with a download link for CS5 DS?
I think if I can download it I can handle validating it from there. Thank you! -
Just did a fresh install of winXP, updated the OS and installed the latest drivers I need.
I have an older machine that runs great but i am getting a plug-in crash error
Can I remove/delete Windows Presentation Foundation
Thanks
mike Daniels
[email protected]Hi mikeinkent
Your crash report indicate a problem with the Flash plugin (NPSWF32_11_5_502_146.dll).
Please update Flash to the latest version.
You can find the latest Flash player versions for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
*http://www.adobe.com/support/flashplayer/downloads.html
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html -
Did i need to reinstall os to new MAC?
some one tell me new MAC os is clone software..not stable
and he tell me i need to reinstall os X to new MAC
then the new MAC will become stable ??
SO??did i need to do that?Hi chill2k;
It has been my experience that the factory install of the operating system by Apple is generally good and it is an extremely rare occurrence when a reinstall is required.
Anyone that will not accept that fact doesn't deserve to had time wasted on them. Forget about them. There is better things to do in this life.
Allan -
My wife had a problem with her iPhone 5C with no voice on the Maps app. I visited my local Apple store and they said the problem was in iCloud. We did a new install and it works great now. Now 4 days later my iPhone 5 that is tied to the same iCloud has the same problem with the Maps app. I really don't want to go through a new set-up with my iPhone 5. What's going on with iCloud?
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?
To move a home folder, create a new home folder, copy the contents of the old home folder into the new home folder, and then delete the old home folder. Take a look at this link, http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf
-
I bought an iPhone 4S at a supplier who uses Talkmobile. When I switched to GiffGaff and asked the Talkmobile people to port my number and the code which they gave me, they told me my iPhone was never locked and did not need to be unlocked. Now my GiffGaff seems to be up and running and my husband can even leave new voicemail messages but I cannot access my phone. Everytime I put the SIM in it says it's not a valid SIM and that I need a supported carrier SIM. To me that sounds like the phone is locked.
My husband (who set this up) is going over to Carphone Warehouse right now. He seemed to think that it was locked. But when we asked the carrier we picked, they said it was not locked so they could not unlock it.
Are all of you answering these questions familiar with the UK carriers? I am from the US but this was bought and serviced in the UK--nothing to do with the US.
Maybe the vendor who sold the phone can/will unlock it for us no problem. I guess I will know in the next 5-6 hours. I have just been without a phone for almost an entire day now and it's very frustrating and I thought someone might have had this exact problem and could answer the question for me outright.
Thanks for everyone's help. Sorry to take up your time.
Maybe you are looking for
-
Professional tax grouping change in mid of the year
Dear All, In my company, i have to change professional tax grouping in mid of the year for few personnel area. For the month of april, may and june professional tax deducted as per the gujarat state and from july onwards it should be deduct as per th
-
Yoga 13" Clementine Orange - Mini review
I got my Yoga 13, Orange, 8gb ram and 256gb SSD on Monday the 17th. I also ordered the slot case and the screen protector as well. In this post I’ll do a mini review of the unit that I got. I hope this will give people here some useful information. I
-
Using a hasmap value in an if statement
Hello all, I have a hashmap that has a hashmap for its value. Basically the the main hash map contains a "location" as the key and the value is a hash map that has two keys one for "assessed" which value will be "yes" or "no" and the other key is "st
-
Itunes cannot run because some of its required info is missing. Re-install.
I have recently upgraded my itunes and when i went to load it, it said "itunes cannot run because some of its required information is missing. Please re-install itunes*." I have done this several times while rebooting my cpu after each install/re-ins
-
Hi there, Quick question on forms, I created some forms in Acrobat, but when the user fills them out, they can't save and email them, it doesn't let them, how do I remove this protection? Thanks!