Did someone have experience to use downloaded driver for SR 245?

Did someone have experience to use downloaded driver for SR 245 to take data? I used GPIB-USB-HS cable (from NI) to collect data, and corrected GPIB address in the driver, which is found by M&A Explorer. When I ran this program driver, I saw ERROR light flashing one time and Activity light flashing for another time, but I got nothing for data. I used BNC cable to connect input signal in INPORT 1 in the front panel of SR 245, so there should have signal input.  Do I need to change something in the program?
Thanks
Linghui

Hi Linghui,
The EABO error usually indicates a timeout.  This could be caused by a
few different things such as sending an
incorrect command or not appending the correct termination
character.  I would check the manual for your device and see if it requires a certain type of termination character, as well as what commands it accepts.  You can also find troubleshooting techniques for this error here and here.
Hope this helps!
Adam W
Applications Engineering

Similar Messages

  • Did someone have the links in the apple site to download mavericks?

    did someone have the links in the apple site to download mavericks?

    Apple stopped releasing updates for 10.6 in February 2014 according to Wikipedia.
    http://en.wikipedia.org/wiki/Mac_OS_X_Snow_Leopard
    If 10.6 is running now you should turn off the option to use NTP in System Preferences > Date & time, disable option to 'set date & time automatically'.
    There is a serious flaw that was found last month & Apple did not release the fix for 10.6.
    If you have the developer tools installed you can fix it manually…
    http://www.macissues.com/2014/12/24/how-to-manually-patch-ntp-for-os-x-10-6-and- 10-7/
    There is a huge discussion on it at…
    Snow Leopard users: Turn off automatic date and time in System Preferences immediately
    I dare say there are other known issues for 10.6 that may also compromise the security of the OS - it's what happens when support ends.
    Other options you may have is to install 10.7 or 10.8. Apple seem to be selling redeem codes for Mountain Loin and Loin…
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    After you pay you can redeem the purchase in the App store.
    You probably want to let Apple know that you would still like to buy 10.9…
    http://www.apple.com/feedback/

  • Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for months with no problems.

    Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Did someone have a problem with the bluetooth?

    did someone have a problem with the bluetooth?

    Huh?
    Do you have a question?
    Are you having a problem?
    What is that problem?

  • Use one drive for attachments using outlook

    using the portal or OWA you can use one drive for attachments rather then adding the file to the e mail itself , i was wondering if we will have this feature on outlook soon

    Hi,
    As you have known, in Outlook client there is no such feature right now, we need to insert the OneDrive file link manually to the new message if we want to attach a file.
    I can't guarantee if this feature will be added in the further version, but please be assured that any improvements in the product are based on users' requirements. Our developers strive to capture Microsoft users' ideas and are working hard to create a
    more powerful and easy-to-use product.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

    rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
    Does anyone know how to fix this?

    What EXACT version of Photoshop CS4 are you running?  You should be on Photoshop CS4 v 11.0.2.
    Also run Apple's software update to see whether it offers you the latest Epson update:
    Printer Driver v9.33
    Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
    MOST IMPORTANTLY:  have Photoshop re-create its own Preferences:
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
    Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
    Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
    NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
    How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If  you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • Can't download driver for HP F4440 on my 10.6.8  ... says can't read file.

    Can't download driver for  HP Deskjet F4440 on my 10.6.8 ... says can't read file.
    Anyone experienced this?   Also weird, because I thought I had 7.0...Apple store says it downloaded Mountain Lion (the "cat" after Snow Leopard, right?) So why does it still say 10.6.8?
    Regardless, I need to use this printer as I just moved and need to print out important stuff for my business.  But  can't download the driver.  Why can't it read it?
    And I don't have the $30 to pay for HP tech support.
    Thanks anyone who can help with this.

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Use external drive for Time Capsule backups AND file storage?

    I have an external drive formatted by my MBP.  I'm using it to store my iTunes music library and iPhoto pics.  Can I use the drive for Time Capsule backups as well?

    Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

  • Use external drive for windows and mac

    Hello,
    I just bought a external 320Gb Western Digital Drive. I would like to use
    the drive for windows and mac.I will not like to make partation on the drive
    to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
    Thanx.

    If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

  • I cannot load Maverick on my iMac HD.  It reports that my HD is used for Time Machine backups and will not load to that drive.  I do not use this drive for backups.  Help.

    I cannot load Maverick on my iMac HD.  It reports that my HD is used for Time Machine backups and will not load to that drive.  I do not use this drive for backups.  I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice.   Thanks.

    Welcome to Apple Support Communities
    You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
    To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
    Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

  • HT1338 Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    You may be able to download it fom here:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • JobOwner doesn't have permissions to use proxy 1 for subsystem CmdExec

    Hi All, 
    I got a strange issue on my SQL Jobs which run with Proxy. Some of the times, the SQL jobs run under job owner, instead of proxy account. Furthermore, it causes the SQL jobs failed. 
    "JobOwner doesn't have permissions to use proxy 1 for subsystem CmdExec"
    Kindly need an assistance on this issue.
    Note*: I have another solution by changing the job owner of the SQL jobs to user account of SQL Agent service. But in this case I want to keep current the job owner. 
    Thanks, 
    HR

    can you confirm if you did the same as explained in the last part of the blog?
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/10/14/who-owns-my-job-and-who-runs-it.aspx
    Also could you confirm if your proxy account has access to the subsystem and if not check this link to update it.
    http://msdn.microsoft.com/en-us/library/ms186760.aspx
    select ss.subsystem as 'subsystem name', sp.name as 'proxy name' from
    msdb.dbo.syssubsystems ss inner join msdb.dbo.sysproxysubsystem sps
    on ss.subsystem_id = sps.subsystem_id
    Inner join msdb.dbo.sysproxies sp
    on sps.proxy_id = sp.proxy_id
    You could run this to see if the proxy has access to subsystem.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • Heads up: I have started to use CR 7 for RAW video

    Just a heads up. Interesting times over at Magic Lantern, where they've cracked the Canon DSLR's to deliver RAW video. The resulting .RAW file is converted to a DNG sequence of custom dimensions. The way I develop these is just like I do my photos: I use Bridge to browse, open up a representative frame in CR, do my settings, and sync up the rest in Bridge. Then I use Image Processor to output a JPG sequence for final rendering in Premiere (I use premiere 5, but Photoshop CS6, that is why I dont import the DNG sequence directly in, say after effects or Premiere).
    Anyway, lots of people have suddenly started using Camera RAW for grading RAW video over the past week or so.
    Just wanted to let you know. Its pretty big news. Here's my first tests: https://vimeo.com/66414746

    It's much better to use After Effects to grade Canon RAW/DNG footage, as you can maintain a 100% nondestructive workflow.
    You can import a DNG frame sequence into After Effects (and it will display the ACR interface automatically, as if you were opening a single image in Photoshop). Whatever you 'develop' in ACR is applied identically to every frame, so yes there are problems if you do something like add grain as it'll produce a static pattern. That doesn't matter for stills, so nobody in the ACR team bothered to add a random seed to the grain function. Maybe if this workflow catches on we'll see it added to future versions, but right now you should add grain later with AE's effects.
    The DNG 'footage' always imports in 32-bit space even though the data from Canon's sensor isn't that deep. If you put it onto a 16-bit comp in AE you can adjust tone/exposure with the same effectiveness as the sliders in ACR, and the non-32 effects such as Add Grain will be happier. There's no real point working in 32-bit comps for these files unless you're doing something extreme. Replicating the shadow/highlight/clarity sliders with curves requires some skill, but you can get some amazing one-click effects on these DNG sequences from plugins such as MB Looks.
    Personally I would make the overall pre-grade in ACR (white balance, approximate exposure, lens correction) but I'd do everything else (denoise/curves/grade/grain) in AE once the footage is on the timeline (I'd apply a little bit of MB Denoiser II, then Colorista or Looks, then AE's Add Grain or MB MisFire). Note that you need to set the lens correction manually, as the DNGs from Raw2dng don't include the EXIF tags.
    One thing I've been asked is how to get the ACR dialog open again once the footage is imported to AE. You do that by right-clicking the footage in the project bin and choosing Interpret Footage > Main (Ctrl+Alt+G). On the dialog that appears, press the More Options button on the bottom left.
    btw - Premiere Pro CS6 does not import DNGs. A previous version did, but Adobe reduced their activities on the emerging CinemaDNG standard and removed the plugin.

  • Keep getting "program couldn\'t download" when trying to download driver for officejet 6000

    keep getting "program couldn\'t download" when trying to download driver for officejet 6000

    Hello,
    I see that you're having an issue installing the software. Have you tried installing the software from a different browser? 
    Does this happen on chrome and IE?

  • How to download driver for OLD sony ericsson???

    after several years sony ericsson known worlwide, now disappear and SONY standing alone..brrrr
    But, i have a problem. I need to download driver for my mobile brodband called SONY ERCSSON MD-300 because my old file is gone and i didnt found it.
    Please anybody could tell me where i find this file?i google it and i find this link :
    http://www.sonyericsson.com/cws/download/1/596/636/1233311619/MD300_Wireless_Manager_5.2.2052.17.zip
    and then if i open this url, it always redirect to this link :
    http://www.sonymobile.com/global-en/
    if anybody can help me..please give other link to download. sory if my english is very good..
    cc : sonycare, administrator, director of sony.
    thanks

    The software is unfortunately no longer available on our webpage but i could send it to you. What operating system do you have?
    Please note that if you bought this MD300 from an operator our software will probably not work as the MD300 may have a different firmware. If you bought it from an operator you need to contact the operator for software/drivers.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for