Did the MBP software update 1.0 fix screen flicker?
the title says it all.
I have been waiting to get my MBP until apple fixes the screen flicker. is now the time for me to buy!!!???!!!
thanks,
a
Yes. My flicker was most noticeable when i was using dashboard and had a white background for my desktop on any setting less than full brightness. After the update the problem is gone as I type this at a low brightness setting. I think the Nvidia card was not optimized for LED back lighting.
Similar Messages
-
My Iphone 5C won't sync for the backup since I did the last software update to my phone. It fails in step 3 of the sync. The error message says it can't find SyncUILorelocalized.dll
Hi rich26817,
Welcome to the Support Communities!
The article below may be able to help you with this. You may need to remove iTunes and all of its components as outlined in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
- Judy -
I did the ios6 software update on my iphone and it did not complete because it said there was an error. It then gave me a message that I needed to restore my phone. When I tried to restore my backup it says it cannot be completed because there is not enough storage. I cant delete anything to make more storage because my phone is not usable because it wont restore. What do I do?
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
Did the latest software update, now my audio books are messed up
After I did the latest software update, my audio books don't transfer right. Not al parts will be there, and what does show up arent in the correct order. These audiobooks are downloaded from my public library.
Try recovery mode as described here:
http://support.apple.com/kb/HT1808 -
HT201401 my microphone does not seem to be working since i did the last software update. any idea's
I can record voice notes no problem, but when i make calls the recepient cannot hear me.
I did a full restore and had one succesful call and that was it.
tried calling with and without the cover no luck.
phone is only two weeks old,problem only started once i did the latest software update. vs5.1.1
any idea's?Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you've gone through ALL the troubleshooting steps and you're still having problems, there's really not much left to recommend. You'll need to bring your phone into Apple for evaluation.
Best of luck.
GDG -
I did the latest software update and now I cannot get my ipad mini to work.
I did the latest software up date. now all my ipad mini will do is flash the apple on and off. Can anyone help?
Try recovery mode as described here:
http://support.apple.com/kb/HT1808 -
Alert the media: software update does not fix hardware flaw of droppd calls
Hard not to be sarcastic...but did anyone actually think that changing the size and number of signal strength bars would change a hardware reception issue?? Signal strength still degrades and calls still dropping with the "death grip".
Apple, PLEASE fix this *&^%$ phone!!!Hello @2020mh , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
I had my phone plugged in to my iTunes yesterday and downloaded the new software. I then went to install the new software and it crashed half way through with an error message. Then it went off completely and wiped everything. I tried to restore from back up and now it says it has restored from yesterdays back up, restarts afterwards and says it needs to restore from back up again. and just goes round and round doing that. Even if i try an earlier back up. I also tried wiping everything back to factory settings and restoring from back up and that did the same as above. Please help!!
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
after updating the software and configuring iCloud onto my phone and PC I notice ALL off my contacts were no longer on my phone. How do I retreive my contacts? Thank you!!
iCloud Help
http://help.apple.com/icloud/?lang=en
Go to Settings, then to iCloud and make sure contacts is checked... -
After I did the latest software update my phone wont hold a charge
I updated my phone yesterday. It was fully charged when I finished. When I looked at it for the first time a couple of hrs later it was dead. Completely charged it again and looked at it for the first time this morning and it was dead again. Ihave had no problems with battery life b4 the update. Any ideas what happened?
iCloud Help
http://help.apple.com/icloud/?lang=en
Go to Settings, then to iCloud and make sure contacts is checked... -
I set my phone to update overnight, woke up this morning and it showed an icon to plug the phone into iTunes. Upon plugging in the phone, itunes said the phone needed to be restored first. iTunes downloaded an update and went through the motions, then said that the phone was not eligable.
What do I do? It won't show anything other than the apple logo.Try updating to the latest version of iTunes.
-
Help. I recently downloaded the latest software update for on my Apple TV (per the prompt Apple TV gave us). Ever since downloading the update, we cannot access movies, play movies, or access iTune store. We can play YouTube videos so the problem is not related to the connection. It happens only when we are trying to access Movies. Very confused. Our AppleTV was working fine until I did the new software update. Now this problem! Help!
re-add the shared lib
check the firewall on the computer -
I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
here in Koolewong.
richard.Uninstall Intego...you don't need it.
-
I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?
Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac -
This has now been ongoing for over a month - the lastest software release hasn't fixed it.
I can import music from CDs - the tracks are ticked for synching and all the associated rigmarole is correct.
Problem is when I synch, apps go across but imported music doesn't. It just gets to step 5 - waiting for changes to be applied - and then does nothing until it eventually finishes synching but no music has come across.
Same issue on my iphone.
I have looked at some solutions on forums but they seem complicated and I don't understand why apple haven't yet fixed this (or why you can't contact them). Seems a basic fundamental service that they are not supplying.
Having spoken to people in the family, its seems I'm not laone with this problem (unless you have a mac......)I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.
Maybe you are looking for
-
Using a dropdown box to change the specified value of a radio button?
I have a form that generates the body text for an email. First there is a dropdown box in which the choices are either "red" or "blue" Further down the page, there is a radiobutton list with 2 items "available" and "unavailable". The specified values
-
Help me please! I shoot my photos in RAW Import them into LR5, I do most of my editing in LR. Next I open the photo I want in PSCC but pushing cm-e, the photo opens but does not look anything like the edit I have made in LR5. The photo the PS shows i
-
Recently an EN sybol has appeared in the top right hand corner of my BB in my BBM/SMS/MMS/emails etc. It wasnt there before but has all of a sudden appeared. I think it happened when i accidently clicked the switch input language shortcut keys (alt +
-
Where can I get a Thunderbolt SPLITTER? (Thunderbolt to Thunderbolt & Thunderbolt.) I cannot daisy chain because of no Thunderbolt OUTPUT on the chassis.
-
Can someone please help? I have had to re-instal my iTunes for whatever reason and now my purchases are not available (locked). When i autorize my 'machine' it says it is successful. seconds later i get an error saying "We could not complete you musi