Didn,t find geographical hierarchy in rsa5

Hi Gurus,
I have to extract the geographical hierarchy from Sap r/3 to bw.But iam not finding the geographical hierarchy in rsa5 and in rsa6.Please shed some light on this issue.
thanks
bhaskar

Version 11.1.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

Similar Messages

  • Unable to find the  0FUNC_AREA_ATTR  in RSA5

    Dear Experts,
    Thanks for watching this thread.I want to install the Transformations of  0FUNC_AREA_ATTR.In Business Content i find another Transformations  0FUNC_AREA_PU_ATTR is both are same.Can i use this Transformations.
    I didn't find any DataSourse in RSA5.Only text  DataSourse is available.
    Please guide me.What's my forther steps.
    Thanks in Advance,
    Srinivasan.

    Hi Srinivasan,
    You can make use of the DS 0FUNC_AREA_PU_ATTR for loading master data attr for Functional Area.
    For info refer this link 0FUNC_AREA master data data source - attributes

  • HT5149 Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found. Reason why I have to reinstall is because I have repaired my Macbook Pro hard

    Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
    Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
    Short history of repair and my Final Cut Pro installation:
    1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
    2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
    3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
    4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
    5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
    Any suggestions on what I should try now?
    Thanks for any reply, I´m in deep water here...

    Sounds like there is a file you're not getting.  Never do a removal manually.  It's so time consuming and a pain.  There's a very easy and fast way to do this, safely, properly.
    Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
    Reboot the Mac.
    Download from scratch.
    If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
    If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives.

  • I'm unable connect my I pad mini to my laptop(window 7,64 bit) after formatting,my iTunes didn't find my device,before format everything working properly but this time lot of problem plz help

    I'm unable connect my I pad mini to my laptop(window 7,64 bit) after formatting,my iTunes didn't find my device,before format everything working properly but this time lot of problem plz help

    You formatted your computer's hard drive? If so, it's like starting with a new computer unless you restored all of your content from a backup but it does;t sound like that's the case.
    See wjosten's excellent how-to here: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Thanks for the response, Peggy. I didn't find a 10 ^ update on the update, but I did update Java to Update 7. I then followed your directions to delete the Appleworks preferences. However, I still have the same problem. Any other suggestions. My wife real

    Thanks for the response, Peggy. I didn't find an update for the update of OA X10.6, but I did update Java to update 7. I also followed your instructions and deleted the preferences files. However, I still get the same dialog box: "Appleworks 6 Quit Unexpectedly". Any other ideas.? Many thanks,
    Sprinkles

    Hi Sprinkles: You may need to repost your response in the original thread to get Peggy's attention. I have included the link to your previous thread below.
    https://discussions.apple.com/message/18043809#18043809
    Stedman

  • I didn't find any link to create a developer account  in oracle's cloud p

    hi all
    How we can create account in Oracle Public cloud.
    I didn't find any link to create a developer account in oracle's cloud page.
    Thanks

    Refer below links
    http://www.oracle.com/us/corporate/press/513460
    http://cloud.oracle.com/mycloud/f?p=service:how_it_works:0
    Regards
    http://www.oracleracexpert.com

  • We didn't find anything to show here in archived emails

    We use Outlook as an email client, since we don't have a Exchange Server. When I make an archive 2 months ago, it works perfect, I could see all my older messages in my inbox and folder created.  For  some reason (I believe after the last office
    update or patch), every time i make an archive, when I open the file this message appear  "We didn't find anything to show here in archived emails" and it's very annoying. Nothing appears even it says that there are unread emails on the folder.
    How can I fix it?

    Hi,
    Please check if you have any filter applied to this folder, try to click "Clear All" on filter dialog and see if it works:
    http://office.microsoft.com/en-au/outlook-help/view-settings-is-under-view-current-view-HT102769168.aspx
    Also, try to
    use scanpst.exe tool to repair your archiver data file. Please refer to this article on how to use scanpst.exe:
    http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
    Hope this helps.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • HT2534 but i didn't find the NONE option on the under the card name

    but i didn't find the NONE option on the under the card name

    It is a new account that you are trying to create and you selected a free app in the store and clicked on 'create Apple id' when 'buying' it ? I tried it earlier today and it still worked for me

  • Trying to Source 0COUNTRY_TEXT text but cant find it in ECC RSA5

    Trying to Source 0COUNTRY_TEXT text but cant find it in ECC RSA5 or when i transfer the application hierachy (RSA9).
    It does not appear under SAP-R3-IO or under 0CA-IO (Which is empty).
    Any ideas on how to find this datasource in R3?
    Thanks alot
    Victoria

    Hi,
    You should be able to find it in  "Cross Application Components" in RSA5 in R/3. Also check the ROOSOURCE table in R/3 for the datasource.
    Also check in CA_GD-IO.
    -Vikram

  • Heloo, my question is, how to make aspect ration 4:3 on i movie 10.01? i didn't find it :), heloo, my question is, how to make aspect ration 4:3 on i movie 10.01? i didn't find it :)

    heloo, my question is, how to make aspect ration 4:3 on i movie 10.01? i didn't find it :), heloo, my question is, how to make aspect ration 4:3 on i movie 10.01? i didn't find it

    Problem Resolved - it is a font issue. Apparently Acrobat can't handle particular fonts and it is best to stick with a very small slection of fonts - Arial, Helvetica, Times Roman.
    I haven't test a lot of fonts. If I do, I'll post there results here.
    Bob

  • Runtime error "didn't find subcontext 'jdbc'."

    hi,
    what does it take to make this application run back on WebLogic?
    It's a bit boring testing applications on Glassfish...
    So i'd prefer all-stage-development in JDeveloper, then final deployment to Glassfish.
    I followed to Shay Shmeltzer blog's recommendation on deployement to Glassfish and reversed it.
    i set deployment platfroms to Weblogic for Application and ViewController projects
    During runtime i get the error:
    While trying to lookup 'jdbc.ncsDS' didn't find subcontext 'jdbc'.Resolved
    What might cause it?
    i set for both DeployPlatform in bc4j.config
    <Custom JDBCDataSource="java:comp/env/jdbc/ncsDS"/>

    well , i talk about using integrated WL that comes with JDev.
    i guess it's all about setting up jdbc in the application
    (i hope nobody gets bored setting up integrated WL each day during development)

  • How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

    How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

    HA!  I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars".  So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account.  Set it to everything you want EXCEPT Find My Iphone.  Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone.  Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE.  I made my own day!
    I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

  • Hi. I am using iphone 3gs running on ios 5.1.1. I didn't find any software update option at any place in setting.  Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Hi
    I am using iphone 3gs running on ios 5.1.1
    I didn't find any software update option at any place in setting.
    Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Just use the phone the way it is, forget the apps.

  • How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1?

    Dear expert,
    How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1? or any t-code?
    i've try RSH1, but not found.
    Megan Wu

    Dear expert,
    How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1? or any t-code?
    i've try RSH1, but not found.
    Megan Wu

  • Client-side RA stub didn't find environment on thread

    Hi,
    When I running my application which invokes an EJB then I am geeting message
    [ReplicaAwareRemoteRef] : WARNING: client-side RA stub didn't find environment
    on thread
    there is no cluster in my weblogic server.
    Thanks
    Rakesh

    Rob Thanks for replying. Details are Below..
    Console Release Build 7.0.2.0
    Server Release Build 7.0.2.0
    Server BuildWebLogic Server 7.0 SP2 Sun Jan 26 23:09:32 PST 2003 234192
    All Server Product VersionsWebLogic Server 7.0 SP2 Sun Jan 26 23:09:32 PST 2003
    34192
    Rob Woollen <[email protected]> wrote:
    What version of WLS are you using? I believe I've seen this before,
    and
    I thought one of the service packs fixed it.
    -- Rob
    Rakesh wrote:
    Hi,
    When I running my application which invokes an EJB then I am geetingmessage
    [ReplicaAwareRemoteRef] : WARNING: client-side RA stub didn't findenvironment
    on thread
    there is no cluster in my weblogic server.
    Thanks
    Rakesh

Maybe you are looking for

  • Trying to install OS X lion and won't let me

    Trying to install OS X lion and won't let me. I keep getting this: (This deisk is used to Time Machine backups)   and I am using an external HD for my time machine

  • How to disable "Open, Save and Save As" prompt

    I'm using IE 10. I'd like to disable the prompt "Open, Save or Save as". Each time I tried to any document (ex. DOC or PDF file), IE will popup the follow prompt: "What do you want to do with ..."  I saw there are some similar threads, but they are p

  • Fade out the web page??

    I have seen this effect all over the web but I do not have a clue as to how to do this. See this page here http://www.suncreekmusic.com/product_info.php/cPath/44/products_id/1082 Then when you get on that page click the link in the upper right, under

  • 64 bit JVM Crash  when loading shared library

    I wrote a simple code to test loading of 64 bit shared library in linux. My JVM crashes on System.loadLibrary method. JAVA CODE import java.awt.Dimension; import javax.swing.JFrame; public class TestJNI extends JFrame{         public native void init

  • Exchange rate on Incoming Payment

    Dear Experts, Can anyone assist with this issue? I have created an invoice in a foreign currency (USD) with a rate of 1.485. At the time of creating the incoming payment, the system rate had changed to 1.48. I therefore decided to change it to 1.485