Didn't get 10G certification automatically after passing IZO-045?

Hello,
I am a 8i OCP, then last year, I want to upgrade to 10G OCP. In last Decemeber, as Oracle website directed, I took and passed IZO-045 (Oracle Database 10G DBA new features for Oracle 8i OCPs) , (the exam centre is Pearsonvue), To my surpirse, I still didn't get 10G certification from Oracle.
What is wrong and how can I do?
Thanks you
Edited by: 795980 on Jan 20, 2011 7:08 AM

I have not received my certification success kit. What do I do?
If your package has not yet arrived, you should:
- Allow up to 8 weeks to receive your kit after you have completed your final certification requirement.
- Visit certification.oracle.com and select your certification path to ensure you have completed all requirements.
- Check certview.oracle.com to confirm that all exams were taken under the same Oracle Testing ID.
- Go to Pearson Vue Website and select "Personal Info" to ensure your address is correct.
- If you still have not received your certificate after the waiting period and your address is correct in your Pearson Vue profile, please send an email message to [email protected]
Go to the Oracle Certification FAQ for more information on how to rectify any issues with the points above. Look under ‘Certificate and Logo.’
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=82#5Q1Ahead
Regards,
Brandye Barrington
Certification Forum Moderator

Similar Messages

I didn't get my certifications until now !

Hello for every one
Dear sir ,
i have passed my last exam at 22/2/2011 and i become now OCA , OCP
but i didn't get my certifications until now .
i asked for it at post office that i write its address and they told me that they didn't recieve any thing about them .
please help me to get it.
regards

Eng Hossam Wally wrote:
Hello for every one
Dear sir ,
i have passed my last exam at 22/2/2011 and i become now OCA , OCP
I hate to say this, but you essentially wrong. You must have proof of your certifcation before you call yourself certified!
The easiest thing is to register on certview. Then you can see if you are certified.
but i didn't get my certifications until now .
So you have your certifcations?
i asked for it at post office that i write its address and they told me that they didn't recieve any thing about them .
So you don't have your certifications?
please help me to get it.
Register on certview ..... goto http://certview.oracle.com and check the FAQs Carefully ... Then goto http://certification.oracle.com and register. It might take a two or three days.
After yo have registered on Certview you can confirm your status and check your certification has been shipped (for practical purposes please think on it as shipped means ordered from the slowest printers on the planet .. not posted).
.... Also note it can take 6 / 8 weeks or a little more to receive a success kit!!!
regardsGood luck registering on certview ... and read the registration instructions carefully!

Didn't get credited 400 minutes after renewing my ...

Hello, on January 14th, 2012, I subscribed for this plan:
Calling to Landlines and Mobiles in Syria:
400 Minutes
20.7¢/minute
$82.99/month
I used up the 400 minutes really fast because I haven't spoken to my wife in a while. Now, on my Skype account page it said that this subscription "Renews on Feb 14, 2012". I can't wait until Feb 14 to speak to my wife again so I bought the subscription again. However, the 400 minutes didn't get credited to my account. I made a call and it used up my Skype credit. This is my account page AFTER buying the 400 minute subscription:
http://i.imgur.com/e4fm1.jpg
Here's the confirmation that I payed for the 400 minute package:
http://i.imgur.com/1F26O.jpg
One more thing: Why was I charged twice on January 14th for the 400 minute subscription? here's proof:
http://i.imgur.com/PCEJo.jpg
Thanks for your help.

Hello? Do I have to call my credit card??

Didn't get FF5 New UI after upgrading from v4. It still show older UI How to get new UI ?

I recently upgraded FF4 to FF5 But Didn't get FF5 New UI. It still show older UI How to get new UI ?

You're welcome.
Please click the '''Solved It''' button next to the answer that answered or solved your Firefox support issue, '''''it appears when you are logged in''''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

I didn't get mail from DAC

Hi,
I didn't get mail from DAC after the end of running an execution plan,
Although I get test mail form DAC.
I've tried to define my self with each level, but it doesn't help.
Does anyone know how the problem can be solved ?
Thank you

1. Verify the Email Configuration ( Tools--> ETL Management--> DAC Server Setup)
Send a 'Test Email'
I get a 'Test Email'
2. Add Email Recipients with Notification Level 1 or 5 or 10 (Setup-->Email Recipients)
Restart DAC Server after Email Configuration. Run a Test ETL and check the status.
I've tested each of Levels and restarted DAC
but it didn't help

Will I get a certification after passing 1Z0-204 (EBS12)

Hi all,
Will I get a certification after passing 1Z0-204 (EBS12). Thx
Joe

ashitajoe wrote:
Hi all,
Will I get a certification after passing 1Z0-204 (EBS12). Thx
Joehttp://certification.oracle.com should have the answer .....
If I look at:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=5001&get_params=p_exam_id:1Z0-204&p_org_id=&lang=
As far as I can see it is associated with the following certifications: (which can be viewed by drilling the link).
Oracle EBS R12 Financials Certified Expert Consultant, Payables ,
Oracle EBS R12 Financials Certified Expert Consultant, Receivables ,
Oracle EBS R12 Supply Chain Certified Expert Consultant, Order Management ,
Oracle EBS R12 Supply Chain Certified Expert Consultant, Purchasing
I believe in all cases in addtion to 1z0-204 you will need to complete an addtional high stakes exam and have verified attendance at one of a set specific approved Oracle Training courses delivered by OU or as authorized by OU by an authorized provider.
1z0-204 seems to be an entry level exam which is also available online (non proctored) and precedents indicate it will therefore not receive a certification by itself.
PS: If you are considering continuing with the above certifications please get awareness on how to obtain the associated training ... information is at http://certification.oracle.com

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

D/l iOS 7 and didn't get pass code Can't open iPad

Can't open iPad. Downloaded ios7 and didn't get pass code. What do I do?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

All of the music on my Ipod Touch is blown out after I synched it with my new MacBook. I didn't get the 'synch' warning-- but now can't find my library of songs. I'm about to panic!

All of the music on my Ipod Touch is blown out after I synched it with my new MacBook. I didn't get the 'synch' warning-- but now can't find my library of songs. I'm about to panic!

The iPod backup that iTunes makes does not inlcuded synced media like apps and music. Thes those iTunes are not restored to the iPod unless they are in the iTunes library.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Maint order should get TECO automatically after final Confirmation

Hi Gurus,
My customer requirement is that, Maint order should get TECO automatically after final Confirmation (in IW41) of last operation. Is it possible? If yes, plz let me know the steps which I need to do.
Thanks in Advanceu2026
Amol.

Hi,
This functionality is not available in std. SAP. You may go for enhancement. please check the following user exits for achieving your requirement.
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
IWO10009 PM Order: Customer Check for 'Save' Event
Praveen

My iphone5 is getting troublesome after installing that ios7 it goes blank and gets switched off automatically pls help, My iphone5 is getting troublesome after installing that ios7 it goes blank and gets switched off automatically pls help

My iPhone 5 is getting hanged after installing ios7 and gets switched off automatically when ever I type and shows vertical black bars fading to getting it switched off.some freezing screen also happen kindly help. Thanks

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

I didn't get log statements in console after deploying the war file IN WAS6

I am new to web sphere 6.o server, I didn't get log statements in console after deploying the war file into the WAS

Albenn
Welcome to the Apple user discussion forums
I'll hit a few of your questions - others will have to do others since I'm not up on some of the issues you ask about
4) is there an easy way to review/delete items (in 6, i run a basic slideshow and delete on the fly -- is this still workable in 7?)?
Yes
5) Are there significant functionality benefits of 7 over 6 (e.g., does the noise function or shadow/highlight really offer significant benefits? The Events seems obvious, but I'm more interested in "under the hood" experience
Yes
Loseless editing - web galleries - events
a) Is import any faster? As my library is growing in size, the import is getting overly slow
It is fine for me (only you can compare to your current) - I have 20542 items using 26.3 GB in 271 events
7) Is there a full-screen edit mode?
yes
8) Can you configure events so that it's not just by day?
yes
9) Is 6's "roll" structure as mirrored in the file system still available in the Events approach, or is the database structure that once you've converted a library, there's no going back?
Events replace rolls (if your rolls are named - NOT the default rollxxx name - they will come across as is - to me events are rolls with much more capability and a new name - some people are VERY putoff by the change (but most love it) for reasons that I simply do not comprehend
10) What is the effective (or advised) maximum library size? I've probably got over 60GB of images in my libraries now, with 20,000 images or so. If 7 can readily digest them (and preserve all my albums, etc.), then I'd love to combine them into one, unless that will kill performance, make the database unstable, drive backups into interminable waits, etc.
The advertised max is 250,000 photos - I have about the same number of photos as you in about 1/3 the space - there are a few users here with libararies your size. With iPhoto Library Manager it is easy to maintain multiple libraries if you choose
LN
Message was edited by: LarryHN

How to startup 10G automatically after reboot????

How to startup 10G automatically after reboot????
Is the same thing that we did with 9i?
Create a script e link this on /etc/rc......?? Is that?
Please send me an example.
Tks,
Paulo Portugal.

Yes, use /etc/rc. The following are 3 start scripts. Modify it to fit it into /etc/rc start/stop model.
==> 1. start the DB:
#!/bin/ksh
# ==> start the DB:
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_infra
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
lsnrctl start
lsnrctl status
PASSWD=`cat $HOME/xadv1/sh/system_passwd.pwd`
sqlplus /nolog<<EOF
connect SYSTEM/$PASSWD as SYSDBA
startup
EOF
#!/bin/ksh
# ==> 2. start infra HTTP
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_infra
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
export LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
export PATH
echo "############# Starting OPMN ############################"
opmnctl startall
echo "############# Starting EM ############################"
emctl start iasconsole
echo "############# OPMN Status ############################"
opmnctl status
#!/bin/ksh
# ==> 3. start iAS
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_ias
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
echo "############# Starting OPMN ############################"
opmnctl startall
echo "############# Starting EM ############################"
emctl start iasconsole
echo "############# OPMN Status ############################"
opmnctl status

Anything that I copy on my desktop gets deleted automatically after a few seconds. Any idea what is going on ?

I have a problem with my MBP.
One day something weird started happening. Every time I would copy / save / download something on my desktop it got deleted automatically after a few seconds. On very very rare occasions this would not happen.
This has been going on for 3 months now and I haven't found any sollution. The last option is to format and reinstall Lion but I hope there is a faster/better solution than that.
I have a 2011 15-inch MBP with the up-to-date Mac OS X Lion.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

After installing, didn't get the directions following for guidance

After downloading & installing Firefox I didn't get the step by step instructions to set up my data.
eg how to import bookmarks, set up my home page, etc

still you can use this:
[[How to set the home page|How to set the home page]]
[[Recover lost or missing Bookmarks|Recover lost or missing Bookmarks]]

Didn't get 10G certification automatically after passing IZO-045?

Similar Messages

Maybe you are looking for