Didn't update Lumia 800, now can't

I am having an issue where I got the update notification on my phone and also it showed up on Zune. Because I was using my work laptop I got the Zune message that updating is not recommended as I am not using my primary computer. So I cancelled the update. Now when I check the update at home, Zune says I am up to date (with the my current fw 12070) also phone is saying no updates found.
So what gives?
Solved!
Go to Solution.

Hi FinSteve,
Thank you for your post. 
Software updates are continuously made available based on operator approvals. Also, software updates for the Nokia Lumia range are released gradually through a quality control system called “throttling”. That means that initially only 50% of eligible phones will receive update notifications. Note that the percentage and duration of this “throttling” process may vary for certain software updates.  In your case, you just have to turn on automatic update notifications in Settings > Phone Update and select “Notify me when updates are found”. So the device will look for the update and prompt you once it is available again.
Hope that helps
Sergent
If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
DON'T BE SHY...

Similar Messages

  • I've just updated my iPhone to the 4.3.5. update, and I now can't sync any new music, ringtones, photos etc. Anyone know how to fix this problem?

    I've just updated my iPhone to the 4.3.5. update, and I now can't sync any new music, ringtones, photos etc. Anyone know how to fix this problem?

    Try this
    https://discussions.apple.com/message/15135297#15135297

  • Getting error 80004005 when updating lumia 800 to ...

    I get notification of new update. When I go through update process and at last step it says update unsuccessful with error 80004005. Tried from different PC but still same. I tried to hard reset but giving same error. Current Os version 7.10.8112.7 and firmware 1600.2487.8107.12070. 
    Lumia 800 unlocked model 059L7C2

    Hi,
    I am getting the same error for 3 months now. I also have an unbranded phone which has been given to me from microsoft, that's why i cannot return it. I contacted microsoft support in both US and Poland but they both advised me to contact phone manufacturer (which I actually believe is a lie, since this error has been seen on Samsung and LG as well so it's probably software malfunction). I even tried restoring software, but it doesn't recognize phone. I really need this phone to update because Windows Phone 8 is coming out soon and I need it for testing purposes asap.
    *note; removed mention of unofficial way to modofy device firmware.

  • 7.8 update Lumia 800 - stuck on 7.5, will not upda...

    I have recently bought two Nokia Lumia 800’s, both phones are sim free and not locked to a network. One is using a Vodafone sim and the other Orange/EE sim.
    The Vodafone phone has updated to 7.8 without any issues, connected it to Zune and it updated stright away... but the other phone on Orange/EE will not update to 7.8 [seems to be stuck on 7.5], If I select update in Zune it checks in and comes back telling me it has the latest software [no errors], I’ve been connecting the phone to Zune daily to see if the update will become available.
    Can anybody help me with this query... I dont understand how two phones bought from the same shop in the same week can behave so differently, I cant see how this is down to the network provider?
    ==================================================​============
    Orange/EE Fails to update -
    Connect to Zune >> Settings >> Phone >> Update >> Result: Your phone is up to date. Current phone software version 7.10 (8773)
    ==================================================​============
    Vodafone successully updated –
    Current phone software version 7.10 (8858)
    ==================================================​============
    Any help will be apprechaited,
    Thank You
    Solved!
    Go to Solution.

    Hi Aaron
    I also experienced this problem, like you I am also with EE. Luckily I read WP central regularly and found a safe way of updating your phone, however it can take a long time to get right, I spent over 2 hours over Jan 31st and Feb 1st. The process I used was force updating the phone and can be very time consuming. If you would like to follow the process, you can view this tutorial and please note your phone will first have to update from 8773, to 8779, to 8853, and  finally 8858 so the process will have to be repeated throughout.
    I have no idea what has happened with the update being rolled out to EE but I can tell you that the update was passed on (Not accepted) by T-Mobile US.
    Seeing this to be the case it would appear EE could do the same, this way will Bypass all that allowing you to get it
    Hope this helps
    Alex
    Alex
    "Give me five and I'll do it in two"

  • I updated iPhoto and now can not burn a cd on iPhoto.  I am getting error message: The burn to the SuperDrive drive failed. The disc drive didn't respond properly and can't recover or retry.

    I updated iphoto 9.4.3 and now it will not allow me to burn pictures on disc.  I am recieving the follwing message:
    The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry.
    I have tried to do a SMC Reset and PRAM reset and it still will not work.  Before the update I was burning pics onto the same dics with no problem.
    Any suggestions on what to do?
    Thanks!

    Hey MGRUBE,
    Thanks for the question. I understand you are experiencing issues with burning a disc. The following resource may help to resolve your issue:
    Disc Burning Quick Assist
    http://support.apple.com/kb/ht1152
    Thanks,
    Matt M.

  • TS5376 wanted to add a cd to my i-phone. told me to update to 11.1 version. I didn't and want to now. can't figure out how to do it. help

    i am totally lost. all i want to do is upgrade itunes to 11.1

    Hi twohugs,
    Thanks for visiting Apple Support Communities.
    If you have iTunes installed on your computer and want to update it, use this option from the menu in iTunes:
    Windows: Choose Help > Check for Updates.
    Mac: Choose iTunes > Check for Updates.
    You can find this information here:
    iTunes: How to install the latest version
    http://support.apple.com/kb/ht5654
    If you do not have iTunes on your computer yet, you can download it here:
    https://www.apple.com/itunes/download/
    Cheers,
    Jeremy

  • Unable to update Lumia 800 to 7.8

    Title says it all.
    I bought my Lumia in December. My Lumia does not find any new updates, even when I have ticked the "notify me when there are new updates available". 
    My current version is: 7.10.8783.12
    I once, but only once! I got the phone updating, it was in step 7/8, then Zune gave me an error code (Can't remember what it was) and since that I have not been able to find that update again.
    Summary: Phone / Zune can't find the 7.8 update

    Try reconnecting phone again,if there is no update you have to wait,or contact your provider.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Updated iTunes and now can't remove songs from my iPod - please help

    I've updated iTunes to version 11.0.0.163 and have an iPod Nano 16gb 5th generation.
    In iTunes, I'm no longer able to manually select songs to remove them from my iPod - I can't even see the list of music that's on my iPod. The only option it gives me is to sync, and I don't want to do that. Before I upgraded iTunes, it was easy to move music between my iPod and iTunes, now I can't - what's happened?
    My iPod is full so I want to remove some music, not all of it. Any advice? Please help - I'm going round in circles!
    Thanks

    Ctrl + B for show Top Menu
    View > Show Sidebar
    itunes will now look more like itunes 10.
    You can click on your device in the lefthand window as before
    You may prefer to use the Music Sync page to select or deselect Playlists, Artists, Albums etc and click apply.
    Delete your files is enabled by ticking the Manualy manage music option on the Device Summary page. You may have to scroll down to find it

  • Iphone 5 has error during iOS 8 update in iTunes & now can't use phone!

    i really need help! my iPhone is stuck in limbo, plugged into the computer to iTunes and trying to do the iOS 8 update. now i can't use my phone at all! what do i do?

    What computer OS do you have?
    Is your computer iTunes up to date?
    What happen when you connect iPhone to the computer?

  • Updated my itunes, now can't even open the program - nothing!

    I received my ipod back from apple, and followed the instructions for the latest updates (I have done this once before without a problem 3 months back) Now, if I go to open itunes, my computer seems to think for a moment, and then nothing happens. I cannot play music at all, from anywhere on my system. Excuse my ignorance, but does anyone have a suggestion?? Thanks.

    at the current state, my quicktime opens fine...I get the error when trying to open iTunes.
    okay. that's possibly a problem with your itunes preference files. if that's what is going on folks can sometimes get past it by rebuilding those preference files.
    i usually work through preference files issues on Windows XP machines rather than Windows 2000. so my standard set of instructions for the pref file rebuild are optimised for XP.
    see the following post:
    b noir: Re: iTunes 7.0.1 crashing
    the difference that i can think of here might be that you might not have the <username> folder in your path to the two sets of pref files. so if you run into trouble locating those folders, post back and i'll try to track down some assistance from someone with a Windows 2000 PC.

  • Tried to update device software, now can't connect to device via USB

    I tried to update my 8100 to the 4.5 software.  I first updated the desktop software to 4.7, then tried to update the device, but the process failed.
    Now, when I open desktop manager it shows as not connected to the device.  I can go into the device mamager properties and select the balckberry, but when I return to the destop amanger it says no device.
    It appears that whatever I do it does not recognise the usb device.
    The display on the 8100 is only text, no graphics or phone company info, and it is basically inoperable.
    There are options on the display for some applications, but if I choose them, it says app not found.
    Is there a way to force an update to it?  Or have I poohed this phone?
    Thanks in advance
    edit:
    I have pulled the battery on the unit to reboot it, and have tried going back to an older revision of desktop manager
    Message Edited by gw22 on 12-05-2008 04:22 PM
    Solved!
    Go to Solution.

    1. Unplug the BB from the USB and PC. Reboot the PC completely from off.
    2. For the BB, you might not have loaded back the Theme that was in use on the device when you upgraded, which will normally give you a black/white screen. You need to follow the instructions below.
    You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
    http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If JL_Cmder does not work, follow this instructional:
    http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Advice please! Installed Leopard update...now can't connect to certain site

    Hi and thanks in advance for any help.
    I updated Leopard (10.5.3) and Safari (3.1.1) with the apple patch a couple of days ago. After install, my MBP wouldn't connect to certain sites like Google or Yahoo. This happens for Safari, Firefox, and IE. Today, Google works but not GMAIL. The other sites remain inaccessible; I get the message "can't open page _ because it can't find the server _"
    After the install and restart, I didn't change anything.
    There are no firewalls in place.
    I tried using openDNS and configuring the IP addresses.
    Rebooted the MBP and the Router and AirPort Extreme.
    Moved the System Config folder to the desktop and starting the browsers.
    Also, my Mail can't access my GMail account.
    Nothing has worked and I'm near my wits end.
    I have a PC desktop that connects fine to everything so I don't think it's my ISP or the router.
    I'm hoping for some help here in lieu of subjecting myself to phone **** or driving all the way to the Apple store.

    Hi
    Welcome to Apple Discussions
    Seems like you covered most bases.
    Rebooted the MBP and the Router and AirPort Extreme
    If you didn't do so, unplug the router and AE. Wait about a minute, then plug-in again. Try Safari or another browser again. If no go I suggest reapplying the 10.5.3 Combo Update. Do not use the computer during the Install. Also, plug in the laptop.
    When complete, "repair permissions" using Disk Utility in your Utilities folder.
    Post back

  • Updated lumia 800 to 7.10 with firmware 1750.0823....

    Hi, can anyone help please?
    I had message to update my nokia 800 so i did. I installed all 10 of the updates until was told updates were completed, took about 20mins. Phone shows OS version 7.10.8773.98 & firmware 1750.0823.8858.12460 but no features seem to have changed, i cannot do anything that the Nokia update page describes. I have tried to force update (as others have been suggested to try) to see if I missed something when updating but still says no updates. 
    Any ideas would be welcome.
    Cheers in advance. Toni 

    I don't know where you looked, but there's about four threads in the last day or so asking the same question.
    Update is multiple parts
    You need all parts
    You did not install 10 updates, the update process is a 10 step procedure
    There are at least three updates to complete.
    MSFT just a day or so ago relased another update so you could well see a fourth.
    The original 7.8 OS update was version 7.10.8858.x
    The first fix released 14 March was to 7.10.8860.x
    The current OS version is 7.10.8862.x
    The current  Nokia Firmware version is 1753.823.8858.x
    If you do not have these versions (see settings/about/more information) then you have more updates coming
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Update Word and now can't even login! Blue Screen and returns to login!

    Hi,
    I'm new to Macs and recently put Word onto it. Went to use it a couple of days ago and it said that it had a critical update for Word. So I clicked yes to update.
    Next thing...it all froze!
    Then took me to login screen. Initially I just thought..."Oh it's restarted after update." But when I logged in it accepted password...went to a blue screen and came back to the login.
    Now I can't get into my mac!
    Please help...what do I do!!???

    There are a couple possibilities. Start out by turning the computer on while holding down the 'Shift' key until you see the grey Apple. This is a safe boot and you can read more about it here. If the computer boots up to the login screen and you can log into your account the problem may be solved. The failed Word update may simply have led to a scrambled cache file that kept the computer from booting.
    The other possibility I'd consider is that the update failed due to a disk drive error. If the safe boot doesn't work get out your System disc and restart your computer with it. (Start the computer, hold the 'C' key and insert the System Restore disc. Once it has booted, move to the Utilties menu and select Disk Utility. Perform a repair and if it reports the drive isn't repairable you'll know that's the problem - and we can talk about what to do next.

  • Update Itunes version, now can't find"eject ipod"command

    Every time I update Itunes I get some quirky problem.  Just updated itunes version last night and now in the itunes tool bar, after syncing I have no "eject owners ipod command on the tool bar...diagnostics says Ipod recognized...sincs okay.  ???

    Hello dearel,
    Perhaps this Support document can assist you.  It providies all the ways you can safely disconnect/eject your iPod.
    http://support.apple.com/kb/ht1853
    B-rock

Maybe you are looking for

  • Needs Ability to Configure AutoSave To Different Drive than Scratch

    If you edit a large document with limited memory, and are exercising the Photoshop scratch file, a coincidental auto-save can really slow things down because the drive then begins to thrash. It would be great if the AutoSave could be configured to go

  • Scanning Nightmare with Mountain Lion... can it really be this way?

    I am running mountain lion and scanning from my HP 8600 Pro E using the built in Mountain Lion scanning software. Here is my issue, if I scan multiples pages and do not have the "Combine PDF" checkbox marked each page is created as a PDF.  If i do ch

  • IPhone 5 video file size

    I did a comparison between a one minute clip shot with the iPhone 4S and the same duration with the iPhone 5. The iPhone 5 file was 35MB smaller. Both are H.264, 1920x1080, 24fps, mono. Anyone have an idea what Apple might be removing from the iPhone

  • Generated Webservice proxy: Maximimum size of byte array

    Hi, We have generated a webservice proxy with JDeveloper (version 10.1.3.4.0) from a WSDL supplied by a .Net webservice. One of the Webservice returns a byte array. We are facing a problem when the size of the returned byte array exceeds the limit of

  • Pool of Knowledge on User Exit and all Enhancement

    Can anybody tell me or guide me on good textbooks and website in which I can learn about enhancement program and user exit program from scratch?  I am new to this kind of function.  Reward points will be given to those contribute to my topic. Thank y