Didn't work mobileme

I have 2 weeks with my Ipod4, the first 2 days after the buy we can configurate and using correctly the MobeleMe localization, but right now have a lot time try to return when this is ok. Please help me. I dont remember but in the settings>mail, contacts, calenders> fetch New data>Push is turn the on> I have select manually> advanced> MobileMe Fetch below here inactive. I try different options but I didn't have a good results.

Let me confirm you wish to find your iphone using mobileme?
settings>mail, contacts, calenders
Make sure you have your mobileme account on the list of accounts, if not add it to the list.
Then make sure find my iphone is on
also make sure location services is on.

Similar Messages

  • I have a white screen on my iPhone.  I've reset it and have also done restore through iTunes.  Didn't work.  Was wondering if i restored as a new phone will i loose my contacts

    i have a white screen on my computers.  I tried resetting it and it worked for a few minutes until it was put to sleep and then went back to white screen when i turned it back on. I tried resetting again and it did not work.  I then did restore for itunes.  it didn't work.  was wondering if i did restore, as a new phone set up in itunes will i loose my contacts.  just want to make sure before i try in the event i have to buy a new phone want to be able to have the information to transfer.

    restoring as new does just that.  It will wipe your phone clean just as if you just bought it.
    If you've been using your iPhone as recommended, you've been synching your contacts to your computer to a contact manager such as Outlook or Address Book, or you've been synching your contacts with a cloud service like MobileMe or Google.  Your contacts should be safe in one of those locations.

  • When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    Hello,
    Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • HT1351 Some of the songs I bought from iTunes will not sync to my iPhone.  They show up on my phone, but the letters look faed and I can't play them.  How do I fix this?  I tried restoring my iPhone and it didn't work.

    Some of the songs I bought from iTunes will not sync to my iPhone.  They show up on my phone, but the letters look faed and I can't play them.  How do I fix this?  I tried restoring my iPhone and it didn't work.

    Sorry, I meant the letters look "faded" not faed.

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do?

    Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do to fix this and get rid of the grey songs?

    Go back to iTunes, select the Music tab, uncheck the 'sync music; button, then hit apply.

  • Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

    Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

    Satellite L505D-S5983
    I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
    Then add things carefully, rebooting Windows and testing the USB and audio at each step.
    Please note this.
    The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
    Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
    All of the latest drivers for your model are easily found here. This one is for the sound.
       Realtek Audio Driver for Windows 7 (32/64)
    -Jerry

  • All the apps that I have downloaded are "waiting" and whenever I try to sync apps on my computer with my phone, the apps section is greyed out and won't allow me to do anything. I have tried restoring to factory settings but it didn't work.

    How can I access my apps? They are all greyed out in itunes. I have tried restoring my iphone to factory settings but that didn't work. I have a feeling it may have something to with the restrictions settings on my phone  restrictions are on) but it won't allow me to change the restrictions without putting in a passcode. I don't remember ever having a passcode and after several attempts have not been able to get the right code.
    Also. on my phone, in settings, personal hotspot, iCloud and Twitter are greyed out. And, the App Store icon is missing from my screen as well.
    Can anybody help me with this?
    Thanks

    yep, unfortunately can't reset without the passcode either.
    With regards to doing a restore, do you mean:
    open itunes on my computer
    click on my device on the left
    go to the device summary
    click restore
    it then asks if i want to back up before i restore (to which i say no)
    then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
    then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
    Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??

    My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??

    Leave it in the rice for at least a day and change the rice every other day or so. The rice and iPod should be in a sealed container.
    Apple will exchange your iPod for a refurbished one for $149. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • How do i enable my Itunes account? When i try to purchase or update it says "Your Apple ID has been disable." I have contacted Apple 3 times and they told me to change my password each time and i told them i tried that, but it didn't work.They didn't help

    When i try to purchase or update it says "Your Apple ID has been disabled." I have contacted Apple 3 times and they told me to change my password each time and i told them i tried that, but it didn't work.They said they would try to fix it and they never contacted me after that. I have an ipod touch 2nd generation.

    What did itunes support tell you?
    If you did everything it says then you contacted them.
    From the article you linked:
    If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance."

  • The report generation toolkit didn't work after the vi was build to an application.exe

    I write a VI using LabVIEW Report Generation Toolkit , it really works in the LabVIEW7.1 and 6.0 enviroment. but after the VI was build in to an application.exe, the LabVIEW Report Generation Toolkit didn't work even the application runs.
    thanks for your help.

    You might want to follow the procedure here:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
    (If the URL doesn't work, you can search for NI document ID: 2B87TVI8)
    Dan

  • Firefox freezes when I open it after less than a minute of searching. It freezes regardless of the website I'm on. I've tried reinstalling it several times and have even tried a clean reinstall but it didn't work.

    When I open it, Firefox freezes after less than a minute of use. After waiting a few minutes, it unfreezes but then freezes again a few seconds later. This happens regardless of the website I'm on. I've tried uninstalling and reinstalling it and the problem didn't go away. I've even tried a clean reinstallation but it didn't work. This only happens on Firefox. IE and Safari work fine.

    -Plug your MacBook into a power source.
    -Click on the Apple menu and select "System Preferences".
    -Click on the "Energy Saver" icon.
    -Click on the "Options" tab.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
    -At the top, next to "Settings for:", select "Battery" from the drop down menu.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

Maybe you are looking for