Dies after first few pages open

Everything works perfectly for the first few pages I open. After a few web pages are viewed it stalls trying to load a page and then nothing will load unttl I quit Safari and restart it. Then it works fine again for a few pages and stalls again. It doesn't matter where I browse. I'm always just a few links away from a total hang-up. All the menus still work. I can cancel the stalled page load. It doesn't help, nothing will oad once the stall ocurs until I quit and restart Safari. Very frustrating.
I've tried uninstalling and reinstalling three times. Same problem every time. I've never loaded more than 4 or 5 web pages without getting stuck like this.
I thought this might be a known bug, but I haven't seen anyone else complaining of this here or in any other forum.
Can anyone explain what could be causing this?

I just wanted to ask one more time about this persistent bug. The laptop this is happening on is a three month old Dell Latitude D620 with Windows XP Pro, Microsoft Office, and very little else installed. It's a pretty clean machine as far as I can tell. I've been studying this discussion forum every day and I can't find another complaint that resembles this behavior. Lots of people seem to have font compatibility problems, blank menus, commands that don't work, internet access getting flipped off, and crashes galore, but no one else has reported this weird problem with Safari consistently appearing to completely lose the ability to load any pages without a restart. I am a Mac user at home and a Windows user at work, so I would love to have Safari working on my office laptop. The problem isn't caused by the company network, because the same thing happens when I bring the laptop home and try it. All the fonts, menus, commands, etc. seem to be working perfectly. It just doesn't want to browse the internet for more than a few pages. In other words it's a browser that doesn't like to browse, even while IE is working just fine.
So before I give up on this forever, I will try asking this question: Has anyone out there had any similar experience with Windows Safari, or am truly I the only one out there with this type of Safari problem?

Similar Messages

  • Wireless printing through Airport Express stops after a few pages

    I have a Canon MP780, which I tried hooking up to my Airport Express USB. Installation seemed to work smoothly with the Airport Utility, and it printed a test page just fine. However, when I printed a longer document, something kacked after a few pages (a communications error).
    Hooking it up is a hassle (have to go through a wall to get to the AE/DSL modem setup), and I ripped it apart after upgrading the canon drivers to no avail. I'll try it again to get the exact error messages if there's more than a snowballs chance in hades that this might work, but thought I'd at least find out if it's hopeless or not before throwing more time at this.
    Any help's appreciated... many thanks.

    There has been similar posts on this forum regarding wireless stability. A few have indicated that there printing was fine until the recent Airport Client Update 2009-002. If you check your System Prefs > Software Update > Installed Software list, have you also run this update?
    Pahu

  • 4M Plus prints light for first few pages

    My 4M Plus has been fantastic since I purchased it new. Recently, the first few pages print light. Once it gets 4 or 5 pages printed it is just fine, very good quality. If it sits at the ready for a period of time (I haven't timed it but seems like at least 1/2 hour) then it happens again. I've replaced the cartridge with same results. It has a page count of 75,689 and has never been in the shop. I fear it may be the fuser failing but other than that I have no clue. Any thoughts?
    Thanks for listening.
    Glenn

    Dear GreedyDragon,
    Replace the fuser unit and your problem will go away. The fuser is not reaching the correct temperature to fuse the toner to the page. If it's not fuseing the toner will smear and feel like its raised from the page.  Let me Know how it turns out. 

  • Printing first few pages of report

    Hi
    I want to print only first few pages of a large output report.
    Is there anyway to do this??
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by balagopal menon ([email protected]):
    hi sridevi
    ur problem can be solved as below
    go to print previewer and click the print icon. A dialogue box with printer settings
    appears where the no of pages mentioned.
    <HR></BLOCKQUOTE>
    Thank you Balagopal for your solution.
    But this doesn't help me as the report is scheduled to run and is run from other concurrent programs...So i can't define the # of pages to print or kill the printer jobs.
    Other than manually cancelling the job
    is there any other way to do this???
    Thanks
    Sridevi

  • Safari stops loading after a few pages...

    This is a revisit of a problem I've had for almost a year now...
    http://discussions.apple.com/message.jspa?messageID=3181078#3181078
    Open a couple of pages (fine) but from then on the progress blue bar makes it to the end of the http:// text and stops.
    The browser is running and there's no sign of App not responding... leading to a force quit. It simply stops loading the pages.
    This is even happening after installing Public Beta so I'm guessing it's deeper in the OS than any of teh files replaced or cleaned with this new install.
    I like Safari, but not when there is a silly corruption/fault like this.
    Thanks
    Nigel.

    I'm having a similar problem. Browser won't get past http not only with Safari but with Firefox as well. But with a few twists. My computer will actually crash on some pages running flash after a few minutes. Are you connecting to internet wirelessly?
    I was at genius bar today and of course the computer seemed to be working ok, after crashing on me two or three times in the morning. But that was before I came up with the flash theory. They checked the crash log and saw an issue with airport. So they think it's an issue with my home router/modem unit. But I'm not so sure because my other computers, pc's, are doing ok. So I'm beginning to think it's an issue with the Airport card in the computer. I'm in process of trying to narrow it down now.
    Could airport card be getting funky after being on for a few minutes? my computer is only a few weeks old.
    jim
    MBP C2D, 2.33/2   Mac OS X (10.4.10)  

  • My iphone 4s battery dies after a few hours after upgrading the software

    My iphone battery dies after approximately 4 hours (with no use) after I upgraded to ios6 and, the phone heats up. This has been going on for about a month now and I've tried everything. Unfortunately, employees at the Apple store flat out refused to help noting, 'oh, just try restarting it, ios 6 doesn't have any flaws' (I've tried multiple times). Needless to say, 4 hours is not enough to warrant keeping a phone so if anyone has any (free) ideas, I would appreciate them greately. Thank you.

    Any ideas on what I can do?

  • Firefox hangs after first Google Page Loaded

    Firefox recently has starting hanging in Google after the first page of a search is displayed. IE runs fine
    I have Firefox 3.6.6.
    What is happening? I cannot continue to use a product that doesn't work
    == This happened ==
    Every time Firefox opened
    == within last few days

    Update
    Ok so after uninstalling quicktime then scrubbing the hard drives for any and all associated files/folders and then cleaning the registry, rebooting then reinstalling quicktime it works, but only 60 % of the time (seems as though if you have opened any kind of drop down list or used a diff plugin on that page already the quicktime plugin and firefox hang. If you open the page and use the quicktime plugin before anything else it semms to be ok.
    Zsolto Chrome really!!!!! With the amount of information gathered by Google and the things they do with it which are borderline criminal if not criminal why on earth would you use such a program???
    There is an open source version out there created by other people that is just as good and doesn't monitor your every move.

  • HP LaserJet 300 M375 nw cancels print job after a few pages

    I just received a new replacement MFP through the insurance I purchased through Office Depo. I have uninstalled and reinstalled the software on my desktop and my work laptop in order to get this one working.  I'm on wifi with both computers. The printer is automatically cancelling my print jobs after 7 - 9 pgs when I'm trying to print 25 or 50 pages at one time.  Also, I'm not able to get the "scan" icon to show up on my desktop on my laptop.

    Hello! Could you please provide more information regarding the issue, such as which version of MAC OS X you are using? Any additional information such as error messages or lights on the printer will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • NIC/Audio dies after a few minutes

    PROBLEM:  Within an hour of use of the system with any NIC being used to connect to cable modem, the following happens:
    1.  NIC stops working (as evidenced by all downloads, chats, browsing ceasing to work)
    2.  sometimes the onboard sound may simply stop working prior to or after this
    3.  system stuttering (mouse moves normally/fluidly, but the apps respond very sluggishly while the task monitor shows low/no cpu utilization)
    4.  eventually lock up (but not freeze: mouse still often visibly movable) occurs requiring reboot
    SYSTEM SPECS:
    KM2M-Combo-L (MS6738)
    XP-2400+ w/ Boxed fan
    1x512MB SpectekPC2100
    PSU 300W 3.3V/20A 5V/30A 3.3V+5V/180A 12V/15A
    Onboard Video
    Onboard Sound
    Onboard (or using PCI) NIC
    Seagate Barracuda 80GB 7200 Primary master
    LG CDRW 48/12/48 Secondary master
    Creative CDRW 8/4/32 Secondary slave
    Windows 2000SP4(but SP0 same problem)
    All the latest MSI drivers using LiveUpdate3 (including BIOS 1.3-latest version)
    Motorola Surfboard Cable Modem
    CLUES:
    The problem happens faster if I do audio or video applications like playing winamp, watching a movie or playing a 3d game (with 10 minutes).
    The problem goes away if I disable the onboard NIC through Windows Device Manager.
    Surprisingly, the problem comes back when I add and use a PCI NIC for internet connectivity with the onboard NIC still disabled.
    However, the problem is absent if I use a USB connection to my cable modem.
    The problem was evident in the first hours of my first successful POST after assembly, during my first long download (of the SP4 files), i.e. while still at "SP0".
    I dont know what to do next:  should I exchange the motherboard or should I use a different operating system like WinXP.  This doesnt feel like hardware issue, but I need to figure out soon before I run out of time from returning the motherboard to the reseller.

    UPDATE:
    I just now had the sound die and system stutter followed by total freeze while installing I-Speeder, even though I am on the cable modem via USB.  However, I still have not had any problem with internet "stutter" since switching from (onboard or pci) NIC to USB for internet.
    WONKANOBY: Thanks for replying.  You seem to misunderstand...the problem happens with no PCI cards installed whatsoever, so how could this be IRQ?  Yet, I am intrigued by your suggestion that this could be an IRQ conflict.  However is this possible with nothing but a mouse and keyboard plugged in?  Should I try switching the optical mouse over to USB (currently its ps/2) and free up and IRQ?  I also just disabled the Com1/Com2/LPT2 ports since I am not using them. Thank you.
    BAS: Thanks for replying. I checked and the PSU says
       3.3V/20A 5V/30A 3.3V+5V/180A 12V/15A  
    which I see from your other excellent troubleshooting posts you believe is not enough on 3 of 4 power counts for a 2400+.  Especialy
    But, BAS, does my problem really fit the power-starvation profile?  The network problem went away when I went to USB connection which uses more power than onboard NIC I would think.
    Is there a way I can be sure before I go back to my reseller and demand they let me tradeup for a beefier case than what they sold me with the rest of the system?  
    For example, is it as simple as disconnecting every non-essential peripheral inside (2 CDROM/RW drives, floppy) and seeing if that makes the problem go away/lessen?   Or shall I go the other way and hook up an extra case fan, etc. and see if the problem worsens with more load?

  • ITunes skipping after first few seconds.

    So I've imported a cd using Itunes 9.
    It's created a folder with a load of m4a files.
    Whilst playing in Itunes, after about 15 seconds, the track skips to the next track.
    I've tried deleting and re-importing - the same problem.
    REALLY annoying. The m4a files work fine in other media players.
    Any ideas?

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If you don't see them straight away it may help to restart iTunes. While downloading selectDownloads in the left-hand column and make sure Allow Simultaneous Downloadsisunticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • Why is my website not displaying graphics after first few loads

    hi,
    i have a wordpress based website. it exhibits a strange problem - on some computers, when using firefox, the site will load just fine the first 5 - 10 times. but any visit after that, the site will load without any graphics (no background, header images etc...), as if the .css file isn't loading. again - this never happenes the first time you load the site, and it never happenes with chrome. i have had this problem on my computer, and another user reported this problem. is there something about my site that could be messing up firefox caching and is causing this?
    the problem can sometimes be fixed temporarily (sometimes by shift-refresh, sometimes by re-installing FF) but it allways comes back after a day or two.
    please, a lot of my users are FF users (as am i) and i'de hate to lose traffic because of this - does anyone have any idea what the problem is? ( i believe the problem is somehow with the site itself, but i can't figure out how that can be)
    thank you
    == URL of affected sites ==
    http://www.ho-lo.co.il

    maybe it works fine because you haven't loaded it enough times. this is very frustrating - after clearing the cach the site loads fine again, for a while, but the problem always comes back - and then i have to clear the cach again.
    i tried safe mode, tried new profile, tried every generic cahc problem soloution. nothing works.
    i viewed the problematic css file in cachviewer, this is the info on the file when the site works fine:
    request-method: GET
    response-head: HTTP/1.1 200 OK
    Date: Sun, 27 Jun 2010 22:16:16 GMT
    Server: Apache mod_fcgid/2.3.5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635
    Last-Modified: Thu, 24 Jun 2010 08:52:04 GMT
    Etag: "b65073e-2aae-489c2c4b99500"
    Accept-Ranges: bytes
    Content-Length: 10926
    Content-Type: text/css
    docshell:classified: 1
    and when the site stops working:
    request-method: GET
    response-head: HTTP/1.1 404 Not Found
    Date: Sun, 27 Jun 2010 22:07:37 GMT
    Server: Apache mod_fcgid/2.3.5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635
    X-Powered-By: PHP/5.2.13
    X-Pingback: http://www.ho-lo.co.il/xmlrpc.php
    Expires: Wed, 11 Jan 1984 05:00:00 GMT
    Cache-Control: no-cache, must-revalidate, max-age=0
    Pragma: no-cache
    Last-Modified: Sun, 27 Jun 2010 22:07:37 GMT
    Content-Type: text/html; charset=UTF-8
    i just don't get this. how can firefox be loading the file just fine one minute, and then not finiding it the next? (and this keeps happening every time i clear the cach!)
    please, can anyone help?

  • Interactive pdf first few pages show okay then they show smaller in size.  Any advice?

    Have tried everything.  Viewed on a mac, on a pc, always the same.
    Page 1,2 and 3 are fine, filling screen.   But from page 4 onwards, page shows much smaller.
    Really need some urgent help please, on a deadline
    Any advice appreciated

    For 1. and 2.: concerning PDFs, there is no "on Mac" and "on iPad". Both are mere environments in which software runs. It depends entirely on which software you are using.
    There is not a single PDF reader available for the iPad that supports everything Adobe Reader can do on a modern desktop. As for your "on Mac", you don't say so but I bet you are  using OS X's Preview application, which is not by Adobe and also does not support any of the more advanced functions possible in PDFs.

  • Can You have roman numerals for the first few pages of a document and then use normal numbering and start back at 1 for the rest?

    I am writing my theses and want to start with Chapter 1 on page one,
    Thanks

    Menu > Insert > Section Break
    and change the numbering in:
    Inspector > Layout > Section > Start at: > uncheck Use previous headers and footers
    Menu > Insert > Auto Page Numbers/Page Numbers
    Right click on the Inserted number to choose its format.
    Peter

  • .MOV's Audio Cutting out after first few seconds????

    If anyone could assist me I would be extremely grateful. When I import .mov files into Premier Pro cs5, it cuts out after a couple of second. Any other file works fine, it’s just the mov’s. If I play the QuickTime outside Premier it works fine. Does anyone have a solution?
    I am trying to compile a video of a range of different clips from my trip in India.
    The clips details:
    * Various dimensions but average: 640x480
    * 30 fps
    * Photo – jpeg
    Is there something specifically I should select when setting up the file?
    Thank you to whoever has to patience and knowledge to help me out.

    Have you installed the Premiere Pro CS5 (5.0.2) update?
    What operating system are you using?

  • My battery dies after a few hours regardless of how long I charge it?

    I remember reading that the ipod nano battery lasts a good six hours at least if fully charged. Mine lasts dramatically shorter, like around two or three, sometimes less. I've had the ipod for maybe a year and a half, and it's a 16gig nano 4th generation.

    Have you tried basics from the manual?
    Restart.
    Reset.
    Restore.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Maybe you are looking for