Diference between Java Card Operating System and java card?
operating system is inside the ROM, but are the JCVM, APIs and JCRE inside this ROM too?
Even if you found it, how are you going to get the cards ? How will you get the tools to put the JCRE/JCVM into ROM and start it ? What about the card OS and native methods ? How are you going to engineer that ?
The cost of all that outweights the benefits of just purchasing the cards already loaded !
Just my 2 cents
Similar Messages
-
I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?
i have to apologize up front for the cheeky response. but i just couldnt resist. if your ipad is speaking in tongues. i would call a priest and perform an exorcism on it first.
-
Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5
PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer Intel Corporation
System Model S5520SC
System Type x64-based PC
Video NVIDIA Quadro FX 4800 driver v.320.78
Display Dell 27" LCD (DisplayPort)
Display Dell 27" LCD (DisplayPort)
Processor Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM) 96.0 GB
Page File Space 0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace -
I downloaded the new operating system and now the Bluetooth in the car does not play my music. The music on the phone show the cloud and the red arrow pointing downwards. How do I download all the music again to my phone please?
I have an ITunes account. I got it when I got my IPOD. I've thought about upgrading, but I didn't see any reason to buy a newer IPOD because they all come with so much stuff I don't want/need. I don't have my current IPOD filled yet and I really don't need an IPOD Touch that has capabilities that my Droid already has. I don't need to be concerned with documents, mail, attaching to Facebook or playing games. I can do all that on my phone. I just want to maintain my music between 3 devices.
So now that I see it is not to my benefit to have this product---can you point me in the direction to cancel this? And how do I get my music back? Will it show up once I cancel my account? -
What's the meaning of "Parallel Operating System" and "Parallel Desktop"?
What's the meaning of "Parallel Operating System" and "Parallel Desktop"?
Also, what is Boot camp? Are they all the same?Boot Camp installs Windows directly on your Mac so you reboot your system to switch between OS X (the "Mac" experience) and Windows if you need to use it for any reason.
The problem with boot camp is that you cannot use your Mac applications along with any that require Windows, so companies like Parallels have developed "virtualization" programs that allow you to install Microsoft Windows within OS X and run Windows inside of your Mac instead of "next" to it as is the case with Boot Camp. You open the program and boot a Windows installation that loads in a separate window, all while you have Safari, the OS X Finder, Mail, Calendar, and other programs on your Mac still running in the background.
In this regard, the benefit of Parallels Desktop and similar applications is that they allow you to run a Windows program alongside those for OS X so you do not interrupt your workflow in order to reboot to Windows and use them. -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this? Am i right? Is there any body out there right now that could help me? I'm thinking about going from 8.1.3 to I guess yosemite? Or is that for Mac computers? I don't understand the language entirely on the help page. Anyone's straight forward and easy stepped advice would be much appreciated. I'm so frustrated and I need a job so badly! Drowning in debt. Any help appreciated!
Thanks,
AYou're a Windows user, correct? If so, read here:
http://support.apple.com/kb/DL1455 -
I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck! -
I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions?
1. Turn off router, printer and iPad
2. Turn on router and wait 30 seconds
3. Turn on printer and wait 30 seconds
4. Turn on iPad and test printing -
The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
I have Adobe Acrobat 9 Standard on both of my computers.
Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/
-
Compatibility issue between your power management system and Windows 8.1
I have purchased a new Lenovo Ideapad S410 and have this problem.
Compatibility issue between your power management system and Windows
It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
If you'd like to know more, you can search online later for this error:
VIDEO DXGKRNL FATAL ERROR
Please help! My laptop is only 5 days old.What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm. -
I down loaded new OS X (Lion)operating system and discovered my CAD programs no longer run. Is it possible to reload the original OS X and remove Lion?
If you backed up before the upgrade, restore the backup.
If not you are going to have to erease the disk and install the older OS.
You should back up any data you want before so that it can be restored afterwards.
Is there a version of you CAD program that is Lion compatable? That would be an easier solution.
Allan -
Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??
Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
Difference between Business service, Business system and Business process
Hi,
Can anyone tell me the difference between Business service, Business system and Business process?
Thanks,
Harikumar. SHi,
<b>Business system</b>
It is a logical system from a business point of view.
One or more logical systems that belong together from a business point of view is called a group of Business system group. A business system group represents a unit within a company or organization that can be defined according to legal, economic, administrative or geographic factors.
The objects in a business system group are uniquely identified by a uniform numbering system.
<b>Business process</b>
Business procedure within an enterprise that uses resources and can involve activites from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
<b>Business service</b>
Its a third party system.
All these belong to a Business Scenario which is
Description of the flow of business processes according to a business typology. A business scenario represents a template for a business process, which runs within a particular area of a company process. All processes required to completely process the task are listed in chronological order in the scenario. Business scenarios can be described graphically, in either aggregated or detailed form (EPC). Example: Direct sale to industrial recipient
<b>**DO REWARD POINTS IF THIS IS HELPFUL FOR YOU**</b>
Regards
AK -
I just downloaded Yosemite operating system and my computer is extremely slow but also not opening my Adobe applications. Can anyone help? thanks!
First, tell Apple about your problems... with details... and hope for an update that fixes your slowness
Second, Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html
Maybe you are looking for
-
Sync multiple icloud accounts to mac
Can I sync multiple icloud accounts to a mac
-
How do we find if any changes in a table
Hi All, We have created some tables in an user. when ever we create any table that table name or object name stored in All_objects like that. if we see that table (all_objects). we can find when table has created and when last DDL performed on respec
-
hi experts, there is one table KNVP for customer master partner function.. i wud like to know is there any similar table for vendor master partner function..if yes then plz tell me the name of that table.. regards, raman.
-
It is a simple question. I have a check box in my menu which is checked and unchecked based on whether the objects in the selected internal frame are labelled. When i select an internal frame from the desktop and it comes to the front and i check the
-
Where are the Jquery Mobile starter options in Dreamweaver CC 2014 ?
In Dreamweaver CC 2014 the Mobile Starter in Page samples seems to be missing. I have it in Dreamweaver CS 6 but the Jquery mobile starter pages aren't in the CC version. In the Adobe tutorials on Adobe.tv you say to use the mobile starter page but i